ICP刻蚀硅模板用于PDMS规则超疏水表面的制作

在ICP(inductively coupled plasma)刻蚀后的硅模板上复制聚二甲基硅氧烷(PDMS),经剥离得到含有一定尺寸的规则微柱阵列疏水表面.实验表明,当微柱高度较小时,微柱高度和边长对接触角有正影响,而间距则呈负影响;但如微柱高度较大,则高度对接触角的影响趋小,而边长呈负影响.间距对接触角的影响表现复杂.微柱间距6μm,边长14μm和高14μm微柱阵列的PDMS表面,静态接触角最大,约151°.     

功能聚合物表面的制备及其化学修饰

介绍了一个综合化学实验--功能聚合物表面的制备和化学修饰,及其教学思路。通过相分离法制备功能聚合物表面,探究不同溶剂组分对聚合物表面功能的影响,同时通过点击化学的方法对亲水表面进行修饰制备疏水表面,用静滴法测量表面接触角大小,并借助扫描电子显微镜对修饰前后的功能聚合物进行表征。结果显示,随着溶剂配方中1-癸醇的减少和环己醇的增加,亲水表面的接触角增大,疏水表面接触角减小,修饰过后的亲水表面表现出良好的疏水性能。该综合实验整合了大学化学基础知识、化学学术前沿以及实验基本技能,有利于培养学生的创新思维,提高综合能力。     

超疏水性表面在冷凝条件下的润湿特性

采用测量接触角和观测偏光显微镜对超疏水表面在冷凝条件下的疏水特性进行了研究, 发现冷凝蒸汽进入超疏水表面的微凸起内冷凝, 表面的疏水特性被破坏, 表面的润湿特性变得不均匀, 部分区域甚至呈现亲水状态. 根据实验结果提出了冷凝条件下粗糙表面表观接触角的计算模型, 并使用冷凝条件下表面接触角的测量结果进行了验证.     

支链化甜菜碱和阳离子表面活性剂在聚甲基丙烯酸甲酯表面的吸附及其润湿性质

利用座滴法研究了两性离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基羧酸甜菜碱(n = 0, 3)和阳离子表面活性剂支链十六烷基(聚氧乙烯)_n醚羟丙基季铵盐溶液在聚甲基丙烯酸甲酯(PMMA)表面上的润湿性质,考察了表面活性剂类型、结构及浓度对接触角的影响趋势。研究发现,表面活性剂浓度低于临界胶束浓度(cmc)时,分子通过氢键以平躺的方式吸附到PMMA界面,亲水基团靠近固体界面, PMMA表面被轻微疏水化;表面张力和粘附张力同时降低,导致此阶段接触角随浓度变化不大。浓度高于cmc时,表面活性剂通过疏水作用吸附,亲水基团在外, PMMA表面被明显亲水改性,接触角随浓度升高显著降低。由于具有相同的支链烷基,表面活性剂类型变化和聚氧乙烯基团的引入对接触角影响不大。     

荷叶表面纳米结构与浸润性的关系

通过烘烤、化学萃取及物理剥除等方法改变荷叶表面的纳米结构和化学组成, 在环境扫描电镜(ESEM)和全反射红外光谱(ATR)对样品的微观形貌和化学组成进行表征的基础上, 为消除其它外界因素影响样品的真实微观形貌, 进一步采用原子力显微镜(AFM)进行了表征. 通过测量不同处理方法所得样品的表观接触角表征了样品的浸润性质. 结果表明, 荷叶表面的蜡质是产生表面疏水性的根本原因, 其微米级结构放大了其疏水性, 而纳米结构是导致其表面高接触角、低滚动角, 即“荷叶效应”的关键原因.     

聚二甲基硅氧烷表面亲水性的研究

为了使聚二甲基硅氧烷(PDMS)具有较稳定的亲水性表面,利用氧等离子体技术对PDMS表面进行处理。研究了氧等离子体处理PDMS表面的时间、功率、氧气流量等参数对表面亲水性的影响,通过接触角测量和X-射线光电子能谱(XPS)对处理效果进行了评价。实验表明:PDMS经氧等离子体处理后放置700 h的表面接触角为72°,达到了持久改性的目的;XPS分析表明,表面亲水性的改善主要是由于表面极性成分的增加,最后讨论了氧等离子体处理PDMS表面的改性机理。     

紫外光引发LDPE膜接枝含氟丙烯酸酯的研究

通过紫外光引发表面接枝聚合反应的方法 ,把含氟丙烯酸酯单体R 5 6 1 0引到LDPE薄膜上 .对经丁酮抽提后的接枝膜进行FTIR、ESCA、SEM和DSC等表征 ,证实含氟聚合物以化学键的方式接枝在LDPE基体膜上 .在一定范围内 ,增加紫外光强、引发剂和单体浓度以及反应温度等均有利于提高接枝率 .经计算R 5 6 1 0的紫外光引发接枝聚合反应总活化能为 5 4 2kJ mol.接枝膜的接触角随着接枝率的提高逐步增大 ,直至趋于恒定 .作者提出接枝膜存在一个在接触角测定时影响基体膜与探测水滴相互作用过程的边界层 .当接枝率较低、接枝层厚度小于边界层临界厚度时 ,基体LDPE影响接触角的大小 ,但随着接枝率提高 ,接枝层逐渐变厚 ,氟聚合物层对接触角的贡献逐渐占优势 ,导致接触角随之增大 .当接枝率超过一定值以后 ,接枝层厚度超过边界层临界厚度 ,接枝层对接枝膜的接触角起全部贡献 ,接触角测定值随之稳定     

非离子表面活性剂Triton X-100溶液在不同生长期小麦叶片表面的润湿行为

选择不同生长期小麦叶片,利用座滴法研究了非离子表面活性剂Triton X-100在小麦叶片表面接触角,考察浓度对接触角、粘附张力、固-液界面张力及润湿状态的影响。研究表明,在低浓度下,表面活性剂分子在气-液界面吸附量(ΓLV)和固-液界面吸附量(Γ'SL)相似,但吸附量较少形成了不饱和吸附层,接触角保持不变,其润湿状态为Cassie-Baxter状态;当浓度进一步增加,液滴突破叶片表面三维立体结构中存在的钉扎效应,取代空气层而处于Wenzel状态,接触角陡降,同时Γ'SL/ΓLV远大于1;当浓度超过临界胶束浓度(CMC)时,表面活性剂分子在气-液界面和固-液界面形成饱和吸附层,并产生毛细管效应,使溶液在小麦叶片三维立体结构中产生半渗透过程,此时接触角保持不变。     

椭圆法测量接触角

接触角在胶体与表面化学,矿物浮选,洗涤和油气开采等领域是一项重要的物性参数。接触角的测量方法很多,其中固滴法因只需少量试样,简便易行而应用较广。人们为避免人为因素对固滴法中作切线的影响,在此基础上提出了各种通过测量液滴尺寸计算接触角的间接方法,并以圆法,即半角法应用最广。这些方法将液滴剖面视为圆形,液滴剖面受重力影响偏离圆形,使计算结果产生误差,在液滴体积较大和界面张力较低时尤为明显。Ryley建议将油滴剖面视为椭圆,在其轮廓线上选择三点,测量六个数据计算接触角,该法不受重力影响,较圆法优越,缺点是需要测量的数据较多,计算公式复杂,难以推广应用。本文提出只需在椭圆轮廓线上选择两点,测量四个数据计算接触角的方法,计算公式比较简单,便于推广应用。     

沥青基碳纤维表面复合处理的研究

研究了硝权氧化和硝酸－钛酸酯复合对沥青基碳纤维（Ｃ－１２）进行表面处理的影响。利用富里衰转换红外光谱扫描、接触角测定及Ｘ－射触角测定及Ｘ－射线衍射等手段,对表面处理各阶段碳纤维的性能与结构进行表征。复合处理与砂酸氧化的机理与效果不同,红外光谱中有新峰出现,纤维表面极性与浸润性发生了变化,认为复合处理方法将有利于拓宽碳纤维的应用范围。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.