Molecular Dynamics,Phase Transition and Frequency‐Tuned Dielectric Switch of an Ionic Co‐Crystal

Dielectric switches that can be converted between high and low dielectric states by thermal stimuli have attracted much interest owing to their many potential applications. Currently one main drawback for practical application lies in the non‐tunability of their switch temperatures (T_S). We report here an ionic co‐crystal (Me₃NH)₄[Ni(NCS)₆] that contains a multiply rotatable Me₃NH⁺ ion and a solely rotatable one due to a more spacious supramolecular cage for the former one. This compound undergoes an isostructural order–disorder phase transition and it can function as a frequency‐tuned dielectric switch with highly adjustable T_S, which is further revealed by the variable‐temperature structure analyses and molecular dynamics simulations. In addition, the distinct arrangements and molecular dynamics of two coexisting Me₃NH⁺ ions confined in different lattice spaces as well as the notable offset effect on the promoting/hindering of dipolar reorientation after dielectric transition provide a rarely observed but fairly good model for understanding and modulating the dipole motion in crystalline environment.     

Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Dielectric and thermal characterization of low density ethylene/10‐undecen‐1‐ol copolymers prepared with nickel catalysts

Ethylene and 10‐undecen‐1‐ol copolymers, prepared using a nickel complex as catalyst, were studied using differential scanning calorimetry (DSC), X‐ray diffraction, and dielectric relaxation spectroscopy. The behavior exhibited by copolymers containing incorporated 10‐undecen‐1‐ol amounts within 0.5 and 4.6 mol % was compared with neat polyethylene. DSC revealed that a new crystalline region with lower thickness lamellae emerges in copolymers due to the side‐chains crystallization. Nevertheless, the global crystallization degree decreases due to the loss of crystallinity that occurs in a greater extent in PE‐like regions. Dielectric relaxation spectroscopy detected two processes, a low activation energy process below ?20 °C related with localized mobility increasing in intensity and deviating to higher temperatures with the increase in 10‐undecen‐1‐ol amount, and a high activation energy process ascribed to the glass transition, located at higher temperatures for the different copolymers relatively to neat polyethylene. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2802–2812, 2007     

Synthesis and dielectric properties of photoreactive polystyrene containing [1‐(3‐isopropenyl‐phenyl)‐1‐methyl‐ethyl]‐carbamate in the side chain

Novel polystyrene derivatives comprising [1‐(3‐isopropenyl‐phenyl)‐1‐methyl‐ethyl]‐carbamate in the side chain were synthesized as photoreactive copolymers. Poly(4‐vinylphenol) was made to react with 1‐(1‐isocyanato‐1‐methyl‐ethyl)‐3‐isopropenyl‐benzene (m‐TMI) and the unreacted hydroxyl groups were protected with acetyl chloride. The copolymers are highly sensitive to the radical photoinitiators that can be activated by irradiation of UV light (λ = 300–365 nm). FTIR spectroscopy was employed to monitor the structural changes in the copolymers exposed to UV irradiation. The dielectric properties of the copolymers were investigated by measuring the capacitance and calculating the permittivity as a function of frequency, along with the I–V characteristics. Their properties were compared with those of thermally crosslinkable poly(4‐vinylphenol) blended with poly(melamine‐co‐formaldehyde), which is frequently used as a dielectric layer in organic field‐effect transistors (OFETs). No significant dielectric dispersion was observed in the frequency range of 1 kHz–1 MHz. The dielectric constant was determined to be in the range of 4.2–6.0, which offers a potential for the application of these copolymers to OFET gate insulators. These soluble dielectrics exhibit good film uniformity and can also be patterned using a standard photolithographic technique. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1710–1718, 2008     

All‐organic nanocomposites of functionalized polyurethane with enhanced dielectric and electroactive strain behavior

For a dielectric elastomer, increasing its dielectric constant substantially could lead to a high electric field induced strain under a low operation field. In this work, high dielectric constant nanocomposites were developed by chemically bonding copper phthalocyanine oligomer (CuPc), a high dielectric constant organic semiconductor, to polyurethane (PU). Transmission electron microscope‐observed morphologies revealed that the sizes of CuPc particles in a nanocomposite of PU attached with 8.78 vol.% of CuPc were in the range of 10–20 nm, much smaller than the sizes (250–600 nm) in physical blend of PU with the same volume fraction of CuPc. At 100 Hz, the nanocomposite film exhibited a dielectric constant of 391, representing a more than 60 times increase with respect to the neat PU. The enhanced dielectric response in the nanocomposite makes it possible to induce a high electromechanical response. A strain of 17.7% and an elastic energy density of 0.927 J/cm³ were achieved under an electric field of 10 V/µm. Copyright © 2014 John Wiley & Sons, Ltd.     

The nearly constant loss,Johari‐Goldstein β‐relaxation,and α‐relaxation of 1,4‐polybutadiene

From high‐resolution dielectric spectroscopy measurements on 1,4‐polybutadiene (1,4‐PB), we show that in addition to the structural α‐relaxation and higher frequency secondary relaxations in the spectra, a nearly constant loss (NCL) is observed at shorter times/lower temperatures. The properties of this NCL are compared to those of another chemically similar polymer, 1,4‐polyisoprene. The secondary relaxations in 1,4‐PB include the well‐known Johari‐Goldstein (JG) β‐relaxation and two other higher‐frequency peaks. One of these, referred to as the γ‐relaxation, falls between the JG‐relaxation and the NCL. Seen previously by others, this γ‐relaxation in 1,4‐PB is not the JG‐process and bears no relation to the glass transition. At very low temperatures (<15 K), we confirm the existence of a very fast secondary relaxation, having a weak dielectric strength and an almost temperature‐invariant relaxation time. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 342–348, 2007     

Effects of different composition ratio on the dielectric relaxation and dynamic mechanical properties of poly(ω‐dodecalactam‐co‐ε‐caprolactam‐co‐propylene oxide) copolymers

The molecular dynamics of new poly (ω‐dodecalactam‐co‐ε‐caprolactam‐co‐propylene oxide) copolymers (DL/CL/PAC) has been investigated by using dynamic mechanical thermal analysis (DMTA) and dielectric relaxation spectroscopy (DRS) measurements. The copolymers were synthesized via anionic polymerization of relevant lactams activated with carbamoyl derivatives of telechelic hydroxyl terminated polypropylene oxide with isophorone diisocyanate (PAC). The calorimetric, X‐ray diffraction, and DMTA measurements were performed to recognize the influence of the composition ratio and the type of PAC on the physical, thermal, and mechanical properties of the synthesized copolymers. The DRS was used to study the frequency dependence of the dielectric permittivity of some isotherms from ?110 to 145 °C. Copolymerization of ε‐caprolactam with about 10 wt % ω‐dodecalactam results in a copolymer that has lower water absorption, a melting point close to that of polyamide 6 and has a high enough degree of crystallinity in respect to high storage modulus. Five dielectric relaxations have been observed in the dielectric spectra, three at lower temperature and two at higher temperature. The copolymers have two glass transition temperatures for polyamide segments and polyether blocks, indicating microphase separation in the copolymers. Other studies directed toward molecular dynamics of polyamide DL/CL/PAC copolymers have not been reported. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Segmental dynamics in poly(ε‐caprolactone)/poly(L‐lactide) copolymer networks

Poly(ε‐caprolactone) (PCL) and poly(lactic acid) (PLA) networks were prepared from macromonomer diols functionalized with methacrylic anhydride, which allows one to get self‐crosslinkable polymers. Besides, both macromonomers were copolymerized to get copolymer networks with different compositions (namely, PCL/PLA: 0/100, 70/30, 50/50, 30/70, 100/0). Dielectric and calorimetric experiments allow one to conclude the microphase separation of the system: one phase made of pure PCL domains while the second one consists of caprolactone units, which somehow plasticize PLA and moves its main relaxation (glass transition) to lower temperatures. The effect of crosslinking PLA on the dynamics of the system was further investigated by comparing with the dynamics for linear PLA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 183–193, 2009     

Synthesis and tunable properties of oligoaniline‐functionalized polyamides

Electroactive polyamides containing dense oligoaniline functionalizations (PAs) were synthesized via oxidative coupling polymerization followed by postpolymerization functionalization, and exhibit excellent solubility, good thermal stability and reversible electroactivity. Interesting spectroscopic changes that occurred through chemical oxidation have been shown, which demonstrate the potential of PAs as an electrochromic material. As a result, the electrochromic behaviors of PAs were investigated in detail, exhibiting high contrast value, moderate switching time, and satisfactory coloration efficiency. Tunable conductive and dielectric properties have also been accomplished by varying the incorporation of oligoaniline segments. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3343–3349     

Relaxation peak broadening and polymer chain dynamics in aramid‐fiber‐reinforced nylon‐66 microcomposites

The relationship between the parameter of symmetric broadening of the glass‐transition relaxation process and the structure of aramid‐fiber‐reinforced nylon‐66 microcomposites is investigated in this article. The approach is based on a previously derived model that sets a quantitative interrelation between the Cole–Cole parameter α, the relaxation time, and the fractal dimension of a mobile polymer segment. The microcomposite, the dielectric response of which reflects the transcrystallinity effects, indeed exhibits significantly different values, such as higher Kirkwood correlation factor and α exponent values, in comparison with the control materials, and this indicates its different crystalline morphology and perhaps lower order in the amorphous phase. However, at this stage, it is still difficult to establish a quantitative relationship with the polymer chain dynamics. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 217–223, 2003     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

Water effect in the thermal and molecular dynamics behavior of poly(<Emphasis Type="Italic">L</Emphasis>-lactic acid)

A detailed dielectric characterization of the relaxation modes found in a poly(L-lactic acid), PLLA, film containing 0.4 mass% of water is provided. The sub-glass relaxation process is a superposition of two processes, one highly influenced by water with activation energy of 50 kJ mol^–1, and another one, with longer relaxation times and lower intensity having activation energy of 38 kJ mol^–1. Dried PLLA exhibits an abnormally broad secondary β-relaxation that probably corresponds to the superposition of multiple processes. Upon water sorption the strength of the more mobile process significantly increases being shifted to lower temperatures which allows the detection of the underlying process. The glass transition relaxation process is deviated to higher frequencies almost one decade due to the water plasticizing effect. The reported results show that small quantities of water may have a profound impact in the relaxational features in PLLA, which should be taken in account when considering the properties and performance of this system.     

Poly(aryl ether ketone)s with (3‐methyl)phenyl and (3‐trifluoromethyl)phenyl side groups

New bisphenol monomers, (3‐methyl)phenylhydroquinone and (3‐trifluoromethyl)phenylhydroquinone, were prepared in a two‐step synthesis. A series of poly(aryl ether ketone)s were derived from these bisphenols via a nucleophilic aromatic substitution polycondensation with various bisfluoro compounds. The polycondensation proceeded quantitatively in tetramethylene sulfone in the presence of anhydrous potassium carbonate and afforded the polymers with inherent viscosities of 0.63–0.91 dL/g. The fluorinated polymers showed lower glass‐transition temperatures and higher thermal‐decomposition temperatures than the corresponding nonfluorinated polymers. The solubility of the polymers was improved by the introduction of bulky pendant groups. All the polymers formed transparent, strong, and flexible films, with tensile strengths of 86.4–102.0 MPa, Young's moduli of 2.28–3.03 GPa, and elongations at break of 14–42%. All the polymers had low dielectric constants of 2.70–2.83 at 1 MHz. Compared with the methylated polymers, the trifluoromethylated polymers exhibited lower water sorption, which was attributed to the stronger hydrophobicity of the fluorine‐containing groups. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3392–3398, 2002     

Synthesis and characterization of novel fluorinated aromatic polyimides derived from 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane and various aromatic dianhydrides

A novel fluorinated aromatic diamine, 1,1‐bis(4‐amino‐3,5‐dimethylphenyl)‐1‐(3,5‐ditrifluoromethylphenyl)‐2,2,2‐trifluoroethane (9FMA), was synthesized by the coupling reaction of 3′,5′‐ditrifluoromethyl‐2,2,2‐trifluoroacetophenone with 2,6‐dimethylaniline under the catalysis of 2,6‐dimethylaniline hydrochloride. A series of fluorinated aromatic polyimides were synthesized from 9FMA and various aromatic dianhydrides, including pyromellitic dianhydride, 3,3′4,4′‐biphenyl tetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA), and 4,4′‐hexafluoroisopropylidene diphthalic anhydride, via a high‐temperature, one‐stage imidization process. The inherent viscosities of the polyimides ranged from 0.37 to 0.74 dL/g. All the polyimides were quickly soluble in many low‐boiling‐point organic solvents such as tetrahydrofuran, chloroform, and acetone as well as some polar organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, and N,N′‐dimethylformamide. Freestanding fluorinated polyimide films could be prepared and exhibited good thermal stability with glass‐transition temperatures of 298–334 °C and outstanding mechanical properties with tensile strengths of 69–102 MPa and elongations at break of 3.3–9.9%. Moreover, the polyimide films possessed low dielectric constants of 2.70–3.09 and low moisture absorption (<0.58%). The films also exhibited good optical transparency with a cutoff wavelength of 303–351 nm. One polyimide (9FMA/BTDA) also exhibited an intrinsic negative photosensitivity, and a fine pattern could be obtained with a resolution of 5 μm after exposure at the i‐line (365‐nm) wavelength. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2665–2674, 2006     

Synthesis and properties of low‐dielectric‐constant polyimides with introduced reactive fluorine polyhedral oligomeric silsesquioxanes

A high‐performance, low‐dielectric‐constant polyimide (PI) nanocomposite from poly(amic acid) (PAA) cured with a reactive fluorine polyhedral oligomeric silsesquioxane (POSS) isomer was successfully synthesized. The features of this reactive fluorine POSS isomer [octakis(dimethylsiloxyhexafluoropropylglycidyl ether)silsesquioxane (OFG)] provided two important approaches (containing fluorine or being porous in the polymer matrix) of reducing the dielectric constant of PI. This reactive POSS isomer had an average of four epoxy groups and four fluorine groups on the POSS cage, and the epoxy groups could be cured with PAA to form a network framework of a PI/POSS nanocomposite. The PI/OFG nanocomposite had a high crosslinking density, high porosity (24.3%), high hydrophobicity, and low polarizability. These properties enhanced the thermal (glass‐transition temperature ～ 362 °C) and dielectric (dielectric constant ～2.30) properties of PI more than other POSS derivatives introduced into the PI backbone. A large number of small POSS particles (<10 nm) were embedded inside the PI matrix when the OFG content was low, whereas interconnected POSS aggregation domains were observed when the OFG content was high. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5391–5402, 2006     

Enhanced dielectric performance of a block copolymer‐polythiophene nanocomposite

Dielectric elastomer actuators (DEAs) transform electrical energy into mechanical work. However, despite displaying exceptional features, the low permittivity of elastomers restricts their application. Hence, to overcome this limitation, DEAs are fabricated by dispersing poly(3‐methylthiophene acetate) (P3TMA), a polarizable conducting polymer, into poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS), a thermoplastic elastomer with excellent mechanical properties. Although high‐quality SEBS:P3TMA films are obtained for all compositions (between 0.5 and 20 wt % P3TMA), their thickness and surface roughness increase with the nano‐sized filler content. Moreover, the conducting particles are well integrated into the SEBS network with no evidence of aggregation or significant change in the mechanical properties of the composites. P3TMA, which forms encapsulated conductive domains within the polymeric matrix, improves the dielectric behavior of SEBS:P3TMA by increasing their dielectric constant with low dielectric losses and no current leakage. Thus, indicating the potential future application of these nanocomposites as elastomer actuators or high energy density capacitors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1896–1905     

Effect of ortho‐methylation on a bis(4‐cyanatocumyl)benezene low‐dielectric resin

A synthesis procedure for and characterization of a tetra‐ortho‐methyl substituted three‐ringed cyanate ester monomer, 4,4′‐[1,3‐phenylenebis(1‐methylethylidene)]bis[2,6‐dimethyl]phenylcyanato, and the corresponding cured resin are described with comparative characterization of the resin analogue without the ortho‐methyl substitutents. The othro‐methylation lowered the dielectric from 2.64 to 2.59 at 1 GHz and from 2.64 to 2.48 GHz at 15 GHz, whereas the tan δ was not significantly affected. Other physical properties also affected included a 40 °C decrease in the glass‐transition temperature, an increase in the thermal‐expansion coefficients, and a reduction in thermogravimetric stability. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 60–67, 2003     

Synthesis of multiwalled carbon nanotube/fluorine‐containing poly(p‐phenylene benzoxazole) composites exhibiting greatly enhanced dielectric constants

A series of high‐performance polymer/carbon nanotube (CNT) composites with different nanotube contents have been prepared via condensation of N‐silylated diamino terminated precursor of the polymer with acid chloride‐functionalized CNTs and subsequent thermal cyclodehydration. The composites have been fully characterized by infrared and Raman spectroscopy, electron microscopy, and thermal analysis. Various interesting morphologic features including helical structures have been observed in the composites as a result of covalent attachment of the polymer. The composites exhibit excellent thermal stability and a significant improvement in the dielectric constant and mechanical strength with the inclusion of CNTs. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012