用丝束电极研究模拟碳化混凝土孔隙液中缓蚀剂对碳钢局部腐蚀的抑制行为

应用丝束电极(WBE)的电位/电流扫描技术, 研究了含Cl-的模拟碳化混凝土孔隙液中, Q345B碳钢局部腐蚀在空间和时间上的发生和发展特征, 同时比较了四乙烯五胺(TEPA)和亚硝酸钠缓蚀剂对局部腐蚀抑制能力的差异. 结果表明NO-2离子能快速渗透腐蚀产物层, 并抑制锈层下的碳钢活性溶解, 而乙烯胺由于在锈蚀层内的扩散速率低, 初期反而会促进锈层下的局部腐蚀, 随着烯胺分子扩散并吸附于锈蚀层/金属界面处, 碳钢活性溶解才受到抑制. 电化学阻抗谱(EIS)可反映局部腐蚀的萌发, 但难以表征缓蚀剂在碳钢表面的不均匀吸附特征. 基于丝束电极表面电位/电流分布所提出的局部腐蚀因子(LF), 可定量表征腐蚀的不均匀特征以及缓蚀剂对局部腐蚀的修复能力.     

L-蛋氨酸对预腐蚀Q235碳钢缓蚀性能的分子动力学研究

采用失重法、密度泛函理论和分子动力学模拟研究了预腐蚀对L-蛋氨酸在60℃、1M的HCl溶液中对Q235碳钢的影响和缓蚀剂的缓蚀机理。结果表明:预腐蚀作用降低了L-蛋氨酸对Q235碳钢缓蚀作用,缓蚀率下降15%。密度泛函理论和分子动力学模拟结果表明,羧基上的氧原子带有明显的负电荷能够吸附到金属表面形成缓蚀剂膜,发挥缓蚀作用,为成膜缓蚀机理。L-蛋氨酸在没有预腐蚀的Q235碳钢表面吸附分子数为24时,缓蚀剂膜最致密。而L-蛋氨酸在预腐蚀后的Q235碳钢表面吸附时的吸附能显著降低,缓蚀剂在碳钢表面的分布密度也明显下降,这很好解释了预腐蚀作用降低了缓蚀剂缓蚀率的实验结果。本文的研究结果对缓蚀剂的研究和实际应用具有一定的指导意义。     

二硫代酰胺类化合物在盐酸中对碳钢的缓蚀性能(英文)

采用失重实验,动电位极化,交流阻抗,量子化学计算和拉曼光谱等方法研究了N,N′-二异丙氧基丙基二硫代二丙酰胺(DPDA)在1 mol.L-1盐酸溶液中对碳钢的缓蚀性能.失重实验结果表明,DPDA在盐酸溶液中能够有效地抑制碳钢的腐蚀,当缓蚀剂DPDA的浓度为1×10-3 mol.L-1时,其缓蚀效率达到90.2%.极化曲线表明DPDA为混合型缓蚀剂,单一的容抗弧变化表明碳钢电极表面的腐蚀过程主要由电荷转移步骤控制.由失重实验,动电位极化和电化学交流阻抗方法得到的DPDA缓蚀效率具有较好的相关性,均表现为缓蚀效率随着DPDA浓度的增大而增加.另外,DPDA在碳钢表面的吸附符合Langmuir吸附等温式.吸附过程的吉布斯自由能(ΔG0a0d0s)为-38.65 kJ.mol-1,这说明DPDA分子在碳钢表面形成共价键而发生了自发的化学吸附.拉曼光谱表明DPDA分子有效地吸附在碳钢表面,量子化学计算结果证明DPDA分子在碳钢表面的化学吸附活性中心集中在S原子上.     

2-十一烷基-N-羧甲基-N-羟乙基咪唑啉在柠檬酸溶液中对碳钢的缓蚀作用

采用失重实验、极化曲线和交流阻抗等方法研究了缓蚀剂2-十一烷基-N-羧甲基-N-羟乙基咪唑啉在质量分数为2%柠檬酸溶液中对碳钢的缓蚀性能。 失重实验表明,该缓蚀剂在柠檬酸溶液中能够有效地抑制碳钢的腐蚀,当其质量分数为0.4%时,缓蚀效率达到86.4%。 极化曲线表明,该缓蚀剂为混合型缓蚀剂,Nyquist图中单一的容抗弧变化表明碳钢电极表面的腐蚀过程主要由电荷转移步骤控制。 该缓蚀剂的吸附行为符合Langmuir吸附等温式,吸附机理是介于物理吸附和化学吸附之间的一种吸附。     

pH值对十二胺在碳钢表面的吸附行为及缓蚀机理的影响

采用电化学方法和扫描电镜技术, 研究了pH值对十二胺在碳钢表面的吸附以及对碳钢CO2腐蚀缓蚀机理的影响. 研究结果表明, 溶液的pH值对十二胺的吸附和缓蚀机理起决定性作用. 十二胺对碳钢的缓蚀作用随溶液pH值的增加而增强. pH值为4.9时, 十二胺主要抑制腐蚀的阴极过程. 缓蚀剂分子在金属表面上的吸附能比较低, 缓蚀剂容易发生脱附, 因此不能有效抑制腐蚀反应的进行. pH值为6.9时, 缓蚀剂的吸附能较高, 能够牢固地吸附在金属表面, 形成有效的扩散阻挡层, 同时抑制腐蚀的阴、阳极过程, 从而有效地抑制腐蚀反应的进行.     

绿色聚天冬氨酸复配缓蚀剂对A3碳钢的缓蚀抑雾作用

采用失重法和极化曲线法研究了聚天冬氨酸(PASP)和十二烷基酚聚氧乙烯醚(OP-10)复配对A3碳钢在6mol·L-1HCl腐蚀介质中的协同吸附行为及缓蚀抑雾作用.结果表明:复配缓蚀剂可有效抑制A3碳钢在HC1介质中的腐蚀,当PASP浓度为20g·L-1,缓蚀率可达94%,抑雾率83%;随着温度的升高,复配缓蚀剂的缓蚀性能下降.复合缓蚀剂在钢表面的吸附符合校正的Langmuir模型,吸附过程为放热、熵减的自发过程;复配体系属于阳极型缓蚀剂.     

抑制Q235钢CO2腐蚀的气液双相咪唑啉衍生物缓蚀剂的缓蚀行为

采用失重法、交流阻抗(EIS)及傅里叶变换红外光谱(FT-IR)、原子力显微镜(AFM)、X射线光电子能谱(XPS)等表面分析测试方法首次研究了硫脲基咪唑啉衍生物(TAI)作为抑制CO₂腐蚀的气液双相缓蚀剂的缓蚀行为. 结果表明, 该硫脲基咪唑啉缓蚀剂能有效地抑制Q235 钢在气液双相中的CO₂腐蚀. AFM测试结果表明该缓蚀剂能显著地降低碳钢表面的腐蚀破坏, 并且由于碳钢表面形成的缓蚀剂吸附膜的疏水作用,可在AFM探头和碳钢表面之间检测到更大的粘附力, 而探针与试样表面之间的长程静电斥力在气相中增加,在液相中由于表面电荷的屏蔽效应而减小. XPS和FT-IR 光谱测试表明液相中和气相中在碳钢表面形成吸附膜的缓蚀剂成分分别是硫脲基咪唑啉衍生物和其酸水解产物——酰胺. 以上结果也进一步证实了咪唑啉衍生物在酸性溶液中的水解机理.     

咪唑啉衍生物在含CO_2的模拟深层气井水溶液中缓蚀机理(英文)

应用电化学弱极化法和原子力显微镜(AFM)研究了咪唑啉衍生物类缓蚀剂在模拟深层气井水溶液中对碳钢的二氧化碳腐蚀的抑制效果和缓蚀作用机理.结果表明,在不同的实验温度下,该缓蚀剂均具有较好的缓蚀性能,属于以抑制阳极为主的混合型缓蚀剂.该咪唑啉衍生物在碳钢表面上的吸附遵从Langm iur方程.计算了该腐蚀体系热力学参数(ΔH°、ΔG°和ΔS°)以及腐蚀反应的活化能(Ea)和指前因子(A),并解释了实验结果.     

5-苯基-1H-四氮唑对铜片缓蚀性能的研究

通过金相显微镜和接触角测试研究了5-苯基-1H-四氮唑在硫-乙醇体系中对铜的缓蚀性能。结果显示,缓蚀剂可以在铜片表面形成疏水性保护膜,有效抑制了铜片的腐蚀。电化学测试表明,当缓蚀剂浓度为70 mg/L时缓蚀效率达到87%,对铜电极有明显的缓蚀作用。通过量子化学密度泛函理论研究了缓蚀剂分子结构与缓蚀性能的关系,分析了缓蚀剂分子的活性位点。通过分子动力学模拟研究了缓蚀剂分子在Cu的(111)表面的吸附行为。     

阴离子表面活性剂与阳离子的相互作用

用密度泛函理论, 在B3LYP/6-31G水平上, 对十二烷基磺酸盐和羧酸盐阴离子表面活性剂与阳离子(Na+, Ca2+, Mg2+)形成的离子对进行结构优化, 从分子水平上研究表面活性剂与阳离子之间的相互作用. 计算结果表明: 磺酸盐和羧酸盐表面活性剂均采用2:1型, 即极性头中两个氧原子与阳离子发生稳定结合; 在与阳离子结合之前, 表面活性剂分子上的α-亚甲基带有明显的负电荷, 因此将其归为极性头; 但在阳离子电荷诱导下, α-亚甲基转而带有部分弱正电荷, 使极性头范围缩小. 计算也发现, 表面活性剂尾链带有弱正电荷, 使胶束内核带有了部分极性, 利于表面活性剂在溶液中的聚集, 此种极性介于烷烃油相和水相的极性之间.     

AFM and FTIR studies of organic cation adsorption on carbon steel coupled with stainless steel

The electrochemical behavior of the anode of the galvanic couple and the adsorption behavior of the cationic inhibitor on it have been investigated by using electrochemical methods, atomic force microscopy (AFM) and infrared spectroscopy (FTIR) technology. A galvanic electrode was prepared by coupling N80 carbon steel (CS) and S31803 stainless steel. All experiments were performed in NaCl solution in the presence or absence of an inhibitor. The results show that, in aqueous NaCl solution, CS carries negative excess charge, for the couple, positive charge is carried on the CS side (anode). The adsorption behavior of the cationic inhibitor on CS is significantly affected by the excess charge carried on it. Owing to the charge interaction between electrodes and the cationic inhibitor, the inhibitor has a greater tendency to adsorb on the single CS and less tendency to adsorb on the CS of the couple. Because of this, the adsorption film on the anode (CS side) of the couple is thin and defective. The failure of inhibiting galvanic corrosion attributes to the defective protective layer formed on the anodic area. Copyright © 2006 John Wiley & Sons, Ltd.     

Pitting inhibition of stainless steel by surfactants: an electrochemical and surface chemical approach

Pitting corrosion of stainless steels causes tremendous damage in terms of material loss and resulting accidents. Organic surfactants have been tried as pitting inhibitors but the understanding of the inhibition mechanisms is mainly speculative. In the present study the inhibition of the pitting corrosion of 304 stainless steel by N-lauroylsarcosine sodium salt (NLS) in 0.1 M NaCl solutions at neutral pH was studied using an approach that combines surface chemical techniques with electrochemical ones. It was found that NLS increases the pitting resistance of 304 stainless steel, with possible complete inhibition at high NLS concentration (30 mM). Adsorption of NLS on 304 stainless steel particles was directly measured. NLS adsorbs significantly on 304 stainless steel with maximum adsorption density close to bilayer coverage. Electrophoretic mobility data for 304 stainless steel particles show that the surface of 304 stainless steel is negative in NaCl solution at neutral pH. The adsorption of NLS makes the interfacial charge even more negative. The relationship between pitting inhibition and adsorption density of NLS suggests that NLS does not adsorb preferentially on the pit nucleation sites and complete inhibition requires that the whole surface be covered completely by NLS. The inhibition mechanism of NLS is proposed to be due mainly to the blocking effect of a negatively charged NLS adsorption layer. This study shows that in addition to the adsorption amount of surfactant, interfacial charge also plays an important role in pitting inhibition.     

Corrosion inhibition behavior of cefuzonam at mild steel/HCl acid interface

The adsorption and corrosion inhibition behavior of cefuzonam (CZM) at mild steel surface were studied gravimetrically and electrochemically by using electrochemical impedance spectroscopy and Tafel polarization techniques. The increase in concentration and immersion time showed a positive effect. Inhibitor molecules directly adsorb on the surface on the basis of donor acceptor interactions between the p-electrons of benzene, sulfur and nitrogen atoms and the vacant d-orbital of iron atoms. The adsorption of CZM followed the Langmuir adsorption isotherm. A potentiodynamic polarization study revealed that CZM acted as mixed type of inhibitor. The results obtained from different methods are in good agreement. The adsorption behavior of CZM was experimentally investigated by contact angle measurement on metal surface. The contact angle of metal surface to the acid solution increased with inhibitor concentration, thereby confirming the increased hydrophobic nature of metal surface to the acid solution having the inhibitor.     

Adsorption Behavior of Amino Acids on a Stainless Steel Surface

The adsorption behavior of various amino acids on a stainless steel surface was investigated at 30 degrees C and over a pH range of 3-10. Acidic and basic amino acids except histidine adsorbed remarkably at pH 3-4 and 7-10, respectively, and showed Langmuir-type adsorption isotherms. The effects of pH and ionic strength on the adsorption isotherms were investigated to analyze the interactions between amino acids and adsorption sites on the stainless steel. Hydrophobic amino acids and glycine showed only small adsorbed amounts at all pHs tested. For the acidic and basic amino acids, reversibility of the absorption and the influence of the ionic strength on the adsorption behavior were examined. The adsorption isotherms of the derivatives of aspartic acid were also measured in order to examine the contribution of the carboxylic groups of acidic amino acids to the adsorption. Furthermore, a Fourier-transform infrared spectroscopic analysis and semiempirical molecular orbital calculation were carried out to analyze the ionization states and the configuration of the amino acids adsorbed on a stainless steel surface. These investigations suggest that the acidic and basic amino acids adsorb through two electrostatic interactions of two ionized groups in the amino acid with a stainless steel surface. Copyright 2000 Academic Press.     

Structural and electrochemical characterization of sputter-deposited nitrided NiCr alloys

Nickel-based coatings are potential candidates for the protection of electrochemical dissolution of steel surfaces. Such coatings, elaborated by magnetron sputtering in a nitrogen atmosphere, offer good corrosion protection, good adherence as well as stability for metallic structures. NiCr alloys with almost constant composition have been deposited with different nitrogen contents on stainless steel and carbon steel surfaces. The coating uniformity, homogeneity, composition and crystallinity have been studied by scanning electron microscopy, energy-dispersive X-ray spectrometry, atomic force microscopy and X-ray diffraction techniques. The corrosion degradation behavior of all the samples was tested in NaCl and NaCl and CO₂ mixture exposures using electrochemical impedance spectroscopy measurements. Nitrided NiCr alloys on a stainless steel substrate resulted with better adhesion than carbon steel, by delaying the corrosion mechanism when exposed to NaCl and CO₂ solution. A comparison of the corrosion resistive behavior of the substrates (stainless steel, carbon steel) and the coatings is made by using the electrical capacitance concept from a double-layer model for the coating–metal interface.     

Inhibitor effect of sodium benzoate on the corrosion behavior of nanocrystalline pure iron metal in near-neutral aqueous solutions

Nanocrystalline iron coating was produced on carbon steel surface by pulse electrodeposition using citric acid bath. The grain size of a nanocrystalline surface was analyzed by X-ray diffractometry and scanning electron microscopy. The electrochemical behavior of nanocrystalline iron coating in the presence of sodium benzoate was evaluated in 30 mg l^-1 NaCl + 70 mg l^-1 Na₂SO₄ aqueous solution using potentiodynamic polarization curves and electrochemical impedance spectroscopy. The results were compared with that of the coarse-grained iron surface. The thermodynamic properties of the inhibitor adsorption were also determined. The results indicated that corrosion inhibition of sodium benzoate in near-neutral aqueous solution was increased as the grain size of iron was decreased from micro- to nanocrystalline surface. This was reported in terms of excess free energy of nanocrystalline surface.     

Polyion adsorption onto catanionic surfaces. A Monte Carlo study

The adsorption of a single and negatively charged polyion with varying flexibility onto a surface carrying both negative and positive charges representing a charged membrane surface has been investigated by using a simple model employing Monte Carlo simulations. The polyion was represented by a sequence of negatively charged hard spheres connected with harmonic bonds. The charged surface groups were also represented by charged hard spheres, and they were positioned on a hard surface slightly protruding into the solution. The surface charges were either frozen in a liquidlike structure or laterally mobile. With a large excess of positive surface charges, the classical picture of a strongly adsorbed polyion with an extended and flat configuration emerged. However, adsorption also appeared at a net neutral surface or at a weakly negatively charged surface, and at these conditions the adsorption was stronger with a flexible polyion as compared to a semiflexible one, two features not appearing in simpler models containing homogeneously charged surfaces. The presence of charged surface patches (frozen surface charges) and the ability of polarization of the surface charges (mobile surface charges) are the main reasons for the enhanced adsorption. The stronger adsorption with the flexible chain is caused by its greater ability to spatially correlate with the surface charges.     

Surface tension of aqueous electrolyte solutions. Thermodynamics

A thermodynamic theory is developed for obtaining the enthalpic and entropic contributions to the surface excess Gibbs energy of electrolyte solutions from the dependence of the surface tension on concentration and temperature. For elaboration, accurate activity coefficients in solution as functions of concentration and temperature are required. The theory is elaborated for (1-1) electrolytes and applied to HClO(4), HNO(3), NaCl, NaBr, and LiCl, of which the first two adsorb positively and the other three negatively. One of the conspicuous outcomes is that in all cases, the surface excess entropies slightly decrease with electrolyte activity but remain close to that of pure water, whereas the enthalpy is different from that. The implication is that the driving force for positive or negative adsorption must have an enthalpic origin. This finding can be useful in developing and evaluating theoretical models for the interpretation of surface tensions of electrolyte solutions.     

Corrosion inhibition of 302 stainless steel with schiff base compounds

The effects of 2,2′-[bis-N(4-cholorobenzaldimin)]-1,1′-dithio (BCBD) and bis-(2-aminophenyl) disulphide (BAPD) on the corrosion behavior of 302 stainless steel in 0.5 M sulfuric acid solution as corrosive medium were investigated using weight loss and potentiostatic polarization techniques. Some corrosion parameters such as anodic and cathodic Tafel slopes, corrosion potential, corrosion current density, surface coverage degrees and inhibition efficiencies were calculated. The polarization measurements indicated that the inhibitors were of mixed type which inhibited corrosion by parallel adsorption on the surface of stainless steel due to the presence of more than one active centre in the inhibitor molecule. The adsorption followed Langmuir adsorption isotherm. The activation energy and thermodynamic parameters were calculated at different temperatures. Results showed that BCBD had a higher inhibition efficiency compared with BAPD.     

Interfacial Behavior of beta-Lactoglobulin at a Stainless Steel Surface: An Electrochemical Impedance Spectroscopy Study

The electrochemical impedance spectroscopy technique was used to investigate the interfacial behavior of beta-lactoglobulin at an austenitic stainless steel surface over the temperature range 299 to 343 K at an open circuit potential. The electrode/electrolyte interface and corresponding surface processes were successfully modeled by applying an equivalent-electrical-circuit approach. A charge-transfer resistance value was found to be very sensitive to the amount of adsorbed protein (surface concentration), thus indicating that the adsorption of the protein (i) was accompanied by the transfer of the charge, via chemisorption, and (ii) influenced the mechanism and kinetics of the corrosion reaction. This was also apparent from the large decrease in the corrosion activation energy (16 kJ mol(-1)) caused by the adsorption of the protein. Adsorption of beta-lactoglobulin onto the stainless steel surface at an open circuit potential resulted in a unimodal isotherm at all the temperatures studied and the adsorption process was described with a Langmuir adsorption isotherm. From the calculated Gibbs free energies of adsorption it was confirmed that beta-lactoglobulin molecules adsorb strongly onto the stainless steel surface. The enthalpy and entropy values indicated that the molecule partially unfolds at the surface upon adsorption. The adsorption process was found to be entirely governed by the change in entropy. Copyright 2000 Academic Press.