亚稳态能量转移发射光谱法测定痕量铅的研究

本文提出了一种测定痕量铅的亚稳态能量转移发射光谱法。利用Surfatron表面波激发获得活化氮。采用电热蒸发微量进样装置进样,考察了各实验参数对测定铅的影响。在波长283.3nm处,铅的检出限可达0.12ng,实际样品分析结果令人满意。对Surfatron表面波激发-活化氮诱导亚稳态能量转移的机理进行了初步探讨。     

钐对锰激活的硼硅锌存储玻璃的影响

使用高温固相法合成了钐锰共激活的硼硅锌玻璃. 利用热释光谱研究了钐的掺入对锰激活的硼硅锌玻璃的陷阱能级的影响, 发现钐的掺入使后者的缺陷向浅能级方向移动, 表现为锰激活的硼硅锌玻璃的余辉和存储性能的相应变化.     

硼氢化钠与锌在水溶液中的反应研究及其分析应用

使用断续流动氢化物发生装置对硼氢化钠与锌在水溶液中反应生成挥发性物种的条件进行了研究。实验发现，镍离子和钴离子能极大地提高挥发性物种的发生效率。在适量的１，１０－邻二氮菲存在下，最佳酸度和工作曲线的线性范围都得到扩展。锌冷蒸汽发生法可以与无色散原子荧光光谱法联用对痕量锌进行测定，检出限为 ２ ｕｇ／Ｌ，对０．４ ｍｇ／Ｌ锌进行 １１次测定，精密度为２．４％（ＲＳＤ）。文中对共存元素的影响进行了研究．方法已应用于水中锌的测定，结果准确可靠。     

稀土超长余辉材料及其涂料的研究

以碳酸锶、氧化铝、氧化铕和氧化镝为原料，用高温固相反应法合成了稀土超长余辉发光材料SrAl2O4：Eu^2 ,Dy^3 。测试了该发光材料的激发光谱、发射光谱、余辉亮度及余辉时间，激发光谱主峰分别位于320和360nm处，激发波长的范围较宽，从紫外到可见光区均可激发该发光材料。发射光谱的主峰位于520nm，发光颜色为黄绿色，余辉可达16h以上。解释了超长余辉发光材料的发光机制。以苯丙乳液为成膜物，添加适量的发光粉及适当的助剂研制出一种超长余辉发光涂料。确定出了该涂料的最佳配方，测定了涂料的各种性能，并对影响涂料性能的主要因素进行了探讨。     

原子吸收法测定添加剂和润滑油中钙、钡、锌含量

本方法适合测定添加剂和润滑油中的钙、钡、锌含量。样品处理使用灰化和硝酸溶解灰分法。测定钡时,使样品溶液在pH>10的条件下,加入0.25MEDTA和用氯化钾溶液稀释后进行原子吸收测定。钙和锌的测定采用空气/乙炔火焰,钡用氧化五氮/乙炔火焰测定,其方法的精密度按相对标准偏差计钙为3.3%、钡为4—8%、锌为9.3%。     

双核过渡金属络合物引发氮分子活化研究

将自然界资源丰富但化学性质上极其惰性的氮气分子在温和条件下转化为氨及其他含氮化合物,具有非常重要的意义。过渡金属络合物引发氮分子的活化及官能化已成为现代工业固氮的一大研究热点。本文回顾了氮分子与双核过渡金属络合物结合的键型模式,总结了影响氮分子活化的诸多因素如配体调变效应、金属调变效应等,对双核过渡金属络合物引发的双氮裂解、双氮官能化及CO/CO2协助双氮活化官能化等反应的实验与理论研究现状和进展进行了简要综述,并对未来过渡金属络合物在氮分子固定的应用发展作了展望。     

1-(2,6-二氯-4-硝基苯)-3-(4-硝基苯)-三氮烯光度法测定葡萄糖酸锌中的锌

目前用光度法测定锌的有机试剂主要有双硫腙和偶氮类试剂。三氮烯试剂是一类测定 Cd2 +、Hg2 +等金属离子的灵敏试剂 ,但用于样品中的 Zn2 +的测定报道较少。笔者用新合成的显色剂 1 - ( 2 ,6-二氯 - 4-硝基苯 ) - 3- ( 4 -硝基苯 ) -三氮烯直接光度法测定葡萄糖酸锌口服液中的锌 ,样品不需前处理 ,操作简便 ,具有较高的灵敏度和较好的重现性     

粗锌中镉的测定方法研究

样品用硝酸-盐酸分解,采用扣除背景的方式消除高含量的锌对低含量镉测定的影响。优化了镉测定的仪器条件,建立了粗锌中镉含量的测定方法。用于测定粗锌中镉,结果的相对标准偏差(RSD,n=11)为0.95%～6.3%。按照实验方法对粗锌样品进行加标回收实验,加标回收率为98.0%～102%。与ICP-AES法测定结果基本一致,能满足日常对粗锌中镉含量的测定要求。     

水蒸气活化制备烟杆基颗粒活性炭的研究

以烟杆废弃物为原料,以木焦油为主的复合粘结剂,通过水蒸气活化制备了烟杆基颗粒活性炭.对影响颗粒活性炭吸附性能和收率的因素如活化温度、活化时间、水蒸气流量进行了系统研究,得到了最佳工艺条件:活化温度为900℃,活化时间为60 min,水蒸气流量为3.31 g/min.该工艺条件下,烟杆基颗粒活性炭对碘的吸附值为1028 mg/g,对亚甲基蓝的吸附值为285 mg/g,收率为24.39%.同时,测定了该活性炭氮吸附,通过BET计算了活性炭的比表面积,并通过密度函数理论(DFT)表征了活性炭的孔结构.结果表明,该活性炭为微孔型,BET比表面积为1073 m2/g,总孔容为0.8152 ml/g.     

Ca/Sr对(Sr2-xCax)MgSi2O7:Eu2+,Dy3+发光性能的影响

使用高温同相法制备了不同Ca/Sr对(Sr2-xCax)MgSi2O7:Eu2+,Dy3+长余辉材料发光材料,用X线粉末衍射表征该材料的相组成,用发射光谱、初始亮度和余辉时间对材料的发光性能进行表征,用热释光技术测定材料的陷阱深度.结果表明:Ca/Sr不仅能影响材料的发射光谱,而且还影响材料的初始亮度和余辉时间,随Ca/Sr(x值)增大,该类材料的发射光谱红移,余辉时间逐渐变短,而初始亮度值先变大后变小,陷阱深度逐渐变浅;当Ca/Sr为1时,材料的发光性能最好,这和材料具有合适深度的陷阱(0.5908 ev)有关.     

Determination of zinc in food using atomic fluorescence spectrometry by hydride generation from organized media

A method was proposed for the determination of zinc by atomic fluorescence spectrometry with hydride generation from surfactant-based organized media. The ability of different nature micelles to improve hydride generation of zinc was investigated using an intermittent flow hydride generator and the possible mechanism was discussed. The advantages of hydride generation from the organized media of cetyltrimethylammonium bromide (CTAB) were contrasted with that from aqueous media in sensitivity and precision of the zinc determination. The micellar media of CTAB improved the hydride generation processes of zinc both thermodynamically and kinetically. In addition some transition metals, presumably metal borides, were found to catalyze the hydrogenation of zinc. The proposed method has been validated by the determination of zinc in the certified reference materials using the standard addition method with satisfactory result.     

Ion-pair extraction and determination of copper(II) and zinc(II) in environmental and pharmaceutical samples.

Copper and zinc were extracted from salicylate solution into Aliquat 336 dissolved in toluene and determined in the organic phase spectrophotometrically using 1-(2-pyridylazo)-2-naphthol. The determination of copper and zinc was also carried out titrimetrically or by atomic absorption spectrometry after stripping the metal ions from the organic phase. The method permits the determination of copper and zinc in environmental and pharmaceutical samples. The standard deviation and relative standard deviation are 0.052 micrograms and 0.69%, respectively, for copper and 0.041 micrograms and 0.60%, respectively, for zinc.     

配位滴定法测定锌含量的合适酸度条件

调节待测体系的pH值是配位滴定中一种重要的选择性滴定手段。采用CTE1.0程序计算了不同酸度条件下的终点误差,同时用配位滴定法测定了模拟样品和市售药品中的锌含量。计算结果和实测结果均表明,在不含钙离子的待测体系中,测定锌离子含量的合适酸度条件为pH=6;在钙、锌混合离子溶液中,测定锌含量的合适酸度条件为pH=5。平行测定实验的相对标准误差为1.63%,加标回收率为99.1%-101.8%。     

Application of three-variables Doehlert matrix for optimisation of an on-line pre-concentration system for zinc determination in natural water samples by flame atomic absorption spectrometry

This article describes an on-line pre-concentration system for zinc determination in environmental samples by flame atomic absorption spectrometry (FAAS). It was based on the sorption of zinc(II) ions in a minicolumn of polyurethane foam loaded with 4-(2-pyridylazo)-resorcinol (PAR). The optimisation step was carried out using two-level full factorial and a Doehlert design. Three variables (sampling flow rate, buffer concentration and pH) were regarded as factors in the optimisation. Results of the two-level full factorial design 2³ for 8 runs (in duplicate) based on the Analysis of Variance (ANOVA) demonstrated that all the factors in the tested levels are statistically significant. Besides, the interaction (sampling flow rate×buffer concentration) was also statistically significant. A three-variables Doehlert design was applied in order to determine the best condition for pre-concentration and determination of zinc. The validation process was assessed as: parameters of the analytical curve, precision, effect of other ions in the proposed system, robustness test and accuracy. The proposed system allowed determination of zinc with detection limit (3σ/S) of 0.28 μg l⁻¹, and a precision (reproducibility), calculated as relative standard deviation (R.S.D.) of 10.0 and 3.7% for zinc concentration of 1.0 and 5.0 μg l⁻¹, respectively. The achieved pre-concentration factor was 91.23 and the sampling frequency was 48 samples per hour. The achieved recovery for zinc determination in presence of several cations demonstrated that this procedure could be applied for analysis of water samples. The accuracy was confirmed by analysis of three certified reference materials. This procedure was applied for zinc determination in several kinds of water samples including saline aqueous waste from oil Refinery.     

Cyclic flow-injection analysis for the repetitive determination of zinc with 2-(5-bromo-2-pyridylazo)-5-[N-n-propyl-N-(3-sulfopropyl)amino]phenol and EDTA.

A circulatory flow-injection method (cyclic FIA) for the repetitive determination of zinc has been proposed. The procedure involves the use of 2-(5-bromo-2-pyridylazo)-5-[N-n-propyl-N-(3-sulfopropyl)amino]phenol (5-Br-PAPS) together with EDTA as a reagent carrier solution, which is recycled in a single-line flow system via a reservoir. The formed 5-Br-PAPS-Zn(II) complex was measured spectrophotometrically at 552 nm, and the signal intensity corresponded to the zinc concentration. After passing through a flow-through cell, the carrier stream then returned to the reservoir, and the main reagent, 5-Br-PAPS, was successfully regenerated by a ligand-exchange reaction with EDTA, allowing the repetitive determination of zinc. The calibration curve for zinc was linear in the concentration range from 0.4 to 10.0 mg dm(-3) with a correlation coefficient of 0.9995 (n = 6). The detection limit of this method was 0.02 mg dm(-3) (S/N= 3). This method allowed as many as 300 repetitive determinations of 2.0 mg dm(-3) zinc solution with only 100 cm3 of the circulating carrier solution, providing a reduction in the consumption of reagents and an elimination of waste, an important approach towards clean chemistry.     

Contributions to the basic problems of complexometry-XXV Determination of rare earths and phosphate without separation

A new method for coraplexometric determination of rare earths (RE) and phosphate without prior separation is described. It is based on indirect determination of RE by back-titration of an excess of DTPA with zinc solution, with Xylenol Orange as indicator. After the titration an excess of La-EDTA complex solution is added and the solution is titrated again with zinc at 40-50 degrees . During this titration lanthanum is displaced from its complex and precipitated as phosphate: LaY(-) + Zn(2+)+ PO(4)(3-) = LaPO(4) + ZnY(2-). The consumption of zinc solution corresponds to the amount of phosphate.     

Determination of B1 2, iodine,iodochlorhydroxyquin, liothyronine,thyroxine and zinc sulfate in drugs by neutron activation analysis

Instrumental neutron activation analysis was used in this study for the determination of the elements cobalt, iodine, and zinc in pharmaceutical dosage forms in order to develop a simple, fast and accurate method for their quantitation in these products. It appears that this procedure could be established as an official method for the determination of the elements iodine and zinc in drugs, in which these are present as active ingredients. Also it could be employed as an alternative technique of the officially used methods for the determination of B_{1 2}, iodochlorhydroxyquin, liothyronine, thyroxine and other substances with pharmaceutical interest, containing these elements in their molecules.     

Apoenzymes of Alkaline Phosphatases of Different Origin for Determining of Trace Zinc(II)

The applicability of the apoenzymes of three alkaline phosphatases of different origin (bacterial from E. coli and animal from chicken intestine or the small intestine of a Greenland seal) to the determination of zinc(II) was studied. The alkaline apophosphatase from seal intestine was found to be promising for this purpose. The preparation conditions of the apoenzyme and the conditions of its reactivation with zinc(II) were optimized. Based on the reactivating effect of zinc(II) on the apoenzyme, which was prepared with the use of EDTA, an enzymatic method was developed for determining zinc(II) (0.01–0.1 g/mL) with c _min = 8 ng/mL. The proposed procedure was applied to the determination of zinc(II) in blood serum.     

Simultaneous spectrophotometric determination of zinc and copper with biacetyl bis of (4-phenyl-3-thiosemicarbazone): Application to the determination of zinc in waste water from a sulfuric acid plant (pyrites process)

The properties of zinc complex of biacetyl bis-(4-phenyl-3-thiosemicarbazone) (BBPT) are described. The optimal conditions for a selective and sensitive spectrophotometric determination of zinc are discussed. Two photometric methods for the determination of traces of copper(II) and zinc(II) ions in mixtures has also been developed and the methods have been applied to the determination of zinc in an industrial effluent.