非水纳米分散系的冷冻蚀刻电镜原位观测

研究了冷冻蚀刻电镜技术原位观测合成的纳米分散系的制样步骤、制样方法,并利用冷冻蚀刻电镜技术原位观测了四种纳米分散系中分散相的粒度、粒度分布和聚集状态.研究结果表明:蚀刻时间对电镜照片图像质量有较大影响,蚀刻时间应根据分散系中分散相含量、粒度大小来选;冷冻蚀刻电镜用于原位观测非水纳米分散系,具有准确、直观、清晰、立体的特点,并且可同时采集多种信息.     

三元复合驱低浓度体系相行为及中间混合层结构分析

低浓度的表面活性剂ASP(碱/表面活性剂/聚合物)驱油体系溶液与模拟原油混合,研究该体系的相行为和界面张力的变化情况,并应用粒度分析仪和冷冻蚀刻透射电子显微镜技术,对中间混合层的粒径分布及其结构进行研究.发现中间混合层的体积随各组分的浓度变化而有一定的规律性,中间混合层与油相和水相之间的界面张力均能达到超低.特别是得到了冷冻蚀刻电子显微镜照片, 并提出中间混合层为胶束、微乳液、乳状液等表面活性剂聚集体的共存体系,其中微乳液结构占主要地位.这对丰富表面活性剂的理论研究及探讨三元复合驱的驱油机理必将起到重要作用.     

纳米石墨颗粒粒度的测量与表征

介绍了用负氧平衡炸药在密闭容器内爆轰制备的纳米石墨粉；用x射线衍射线线宽法(谢乐公式)、透射电镜观察法(TEM)、激光拉曼散射法、比表面积法和x射线小角散射法等手段，对合成的纳米石墨粉颗粒粒度进行了测量，结果表明炸药爆轰法制备的纳米石墨粉具有六方石墨结构，颗粒呈球形或椭球形，分布在4—9nm之间，平均粒径为8．7nm；在5种测量方法中，用x射线衍射线线宽法(谢乐公式)得到的平均粒径值最小，而用其它4种测量方法所得到的粒径值基本一致。     

单分散纳米钛酸钡晶体的微波水热合成与表征——推荐一个研究型综合实验

介绍一个研究型综合实验——微波法合成单分散纳米钛酸钡晶体及其表征。采用廉价易得的原料,以微波水热合成法在短时间内（2 h）制备出粒径10～20 nm、单分散、长方体块形纳米钛酸钡晶体。利用X射线粉末衍射、红外光谱、激光拉曼光谱、接触角仪、热重分析和透射电子显微镜对产物的晶相结构、表面性质、形貌等进行表征。该实验既迎合现代科研的热点,又满足教学要求,同时,其很强的拓展性非常适用于培养学生的科研创新能力。     

光致还原制备透明质酸-纳米银复合物

以透明质酸（HA）为分散载体,通过紫外光还原硝酸银制备出了Ag纳米颗粒分散体系。用紫外-可见光分光光度计（UV-Vis）、傅里叶变换红外光谱（FT-IR）、透射电子显微镜（TEM）、动态激光光散射（DLS）及抑菌实验对所得样品的形貌、结构及性质进行表征。结果表明：所制备的Ag纳米颗粒呈球形,平均粒径约为18 nm,在水...     

无皂乳液聚合法制备非球形聚苯乙烯粒子研究

采用苯乙烯(St)、二乙烯基苯(DVB)、甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,在乙醇和水混合介质中通过无皂乳液聚合法制备了非球形聚苯乙烯(PS)粒子。通过FT-IR、TEM和激光粒度及电位分析仪对粒子的结构、形貌、粒径以及Zeta电位进行了表征。结果表明,所合成PS粒子均含三种单体结构单元,且形貌上均为非球形;随着DVB用量的增加,PS粒子形貌更趋于球形,粒径和单分散系数均逐渐增加;随DMC用量增加,PS粒子粒径随之增加,单分散系数逐渐减小,表面Zeta电位也逐渐增加;KHCO3用量的增加能使PS粒子粒径和单分散系数均增加;随着醇水比的减小,PS粒子粒径逐渐减小,而单分散系数则逐渐增加。     

单分散高纯硅胶色谱柱填料的制备

在氨水和氨气催化下使单晶硅粉水解, 合成了单分散、高纯的纳米二氧化硅水溶胶; 再利用聚合诱导胶体凝聚法(PICA)制备单分散脲醛二氧化硅复合微球, 经过高温煅烧后得到球形硅胶色谱柱填料. 通过电感耦合等离子-质谱(ICP-MS)、电子显微镜和BET比表面积测试等手段对球形硅胶的纯度、粒径分布及比表面积进行了表征, 并通过色谱分离对硅胶填料的性能进行了评价. 实验结果表明, 该方法合成的色谱柱填料具有纯度高、粒径分布均匀、机械强度高及分离能力强等优点.     

银/聚合物纳米复合材料

银/聚合物纳米复合材料是一种典型的聚合物基复合材料, 其结构和性能依赖于合成方法,因此开发材料的优异性能必须以深入研究纳米材料的先进合成技术为前提。本文综述了纳米银粒子及其与聚合物形成的纳米复合材料的最新合成进展, 重点介绍了基于液相化学还原方法合成纳米银粒子的新方法, 如溶胶-凝胶法、沉淀法、微乳液法和离子液体法, 以及纳米银粒子的分散技术和原位法合成银/聚合物纳米复合材料的新技术, 并介绍了纳米银复合材料的电绝缘性、表面增强拉曼散射性能、抗菌性及其在生物医学等领域中的应用。     

高岭土原位无溶剂法合成小粒径ZSM-5分子筛

结合原位水热法和无溶剂法的优点,在不添加有机模板剂和溶剂的基础上,以高岭土为原料通过晶种诱导绿色高效地合成出ZSM-5分子筛。运用X射线衍射、N2吸附-脱附、扫描电镜、透射电镜和NH3程序升温脱附(TPD-NH3)等技术对ZSM-5分子筛进行表征。表征结果与原位水热法合成的ZSM-5分子筛相比,原位无溶剂法合成ZSM-5分子筛的结晶度较高、晶体粒径较小、酸强度略高、孔结构相似。     

纳米硅铝载体的制备与表征

采用超增溶纳米自组装原位合成法制备催化剂硅铝载体.实验表征结果表明,用超增溶纳米自组装原位合成法能够制备出形状规则、尺寸均一的纳米球状粒子.该纳米硅铝载体上布满了由纳米粒子搭建的孔属于介孔材料,比表面积在222.61~286.08 m2/g之间,孔容在0.486~0.625 mL/g之间,平均孔径在7~10 nm之间,并且以大孔和中孔为主.酸性主要分布在弱酸和中强酸区,并且大多数为L酸,有少量B酸.该载体粒子形状、大小比较规则、均一,粒径分布比较集中,是比较理想的纳米催化剂载体.     

Supersaturation Control Growth of Nanoparticle ZnO and Size Distribution Control

"Nanoparticle ZnO was synthesized in non-aqueous medium. UV adsorption spectra were measured and effective mass model was used to calculate particle size in situ. A technique method named as supersaturation control growth was developed, which dealt with addition of nanoparticle suspension with small size to another suspension with big size. As a result, those small particles completely dissolved and those big ones totally grew because of dissolution degree difference between small particles and the big ones. The particle number of big particle suspension kept being a constant and the growth rate was much higher than Ostwald ripening. Main characteristic of this technique is that size distribution of nanoparticles can be narrowed provided original size difference of two suspension is big enough and original size distribution is not too broad."     

反相非水乳液法制备聚酰亚胺微球

在N,N-二甲基甲酰胺(DMF)/Pluronic-F127、十二烷基苯磺酸钠(SDBS)/液体石蜡(LP)反相非水乳液体系中,以均苯四甲酸二酐(PMDA)和4,4′-二氨基二苯醚(ODA)为单体合成聚酰胺酸(PAA),采用吡啶/乙酸酐脱水剂,对PAA化学酰亚胺化,并进一步热酰亚胺化,制得PI耐热微球.产物通过红外、热重、扫描电镜表征.结果表明,较高的固含量和良好的乳液分散性有利于PI微球的形成;反相非水乳液体系稳定的配比条件是,VDMF∶VLP为1∶4,MF127∶MSDBS为3:2,乳化剂用量为9 wt%;在此配比条件下,当固含量为20%,热酰亚胺化温度不高于330℃时,可制得分散良好、球形规整、高热稳定性的PI微球,其粒径约为10μm.     

聚合物对硫化铅钠米微粒的稳定作用

以含铅聚合物微凝胶与Ｈ２Ｓ气体反应制得ＰｂＳ纳米微粒／聚合物复合体系，利用小角Ｘ光散射方法对复合在聚合物中的ＰｂＳ纳米微粒的粒度及分布进行了表征，研究了不同反应条件对其粒度及复合体系稳定性的影响。     

超声膜扩散法制备纳米银粒子

采用超声膜扩散(Ultrasound-assisted reaction method, UAMR)的方法, 以NaBH4还原溶液中的银离子, 在聚乙烯吡咯烷酮(PVP)为稳定剂的条件下, 制备出了平均粒度为4.7 nm的银纳米粒子. 与超声滴加法(Ultrasound-assisted dropping reaction method, UADR)相比, 超声膜扩散法制备出来的银纳米粒子的粒径小, 且尺寸分布较窄.     

水热法制备纳米ZnS的光催化性能研究

采用水热法制备了结晶良好的ZnS纳米粒子,通过XRD、FT-IR、TEM、UV-Vis DRS等手段对所合成的ZnS粉体的结构、粒度和理化性能进行表征,并以亚甲基蓝为目标降解物,评价了ZnS粉体在紫外光和可见光下的光催化性能。研究结果表明,水热法制备的纳米ZnS为典型的六方晶系,粒径大致为10～20 nm,不论是在紫外光或可见光下对亚甲基蓝均具有优异的脱色率,呈现出良好的光催化性能。     

Synthesis of highly stable silver nanoparticles by photoreduction and their size fractionation by phase transfer method

In this report we demonstrate a green chemical approach for the synthesis of stable silver nanoparticles in aqueous medium using tyrosine as an efficient photoreducing agent. A narrow size distribution of silver nanoparticles can be achieved by this simple photoirradiation method without using any additional stabilizing agents or surfactants. Two different irradiation sources have been explored resulting in a different particle size distribution pattern in each case. Further, we show that starting from a polydisperse tyrosine synthesized silver nanoparticles sample, it is also possible to fractionate them into different size ranges. The size fractionation was achieved by a 2 stage phase transfer method employing different organic solvents. The nanoparticles synthesized were characterized using UV-vis spectroscopy, Transmission electron microscopy (TEM) and X-ray diffraction (XRD) techniques.     

A new design strategy for dispersion stabilization of Ni particles based on the surface acid and base properties of Ni particles

A dispersion technology for Ni particles suspended in a non-aqueous medium based on the quantitative evaluation of surface acid-base properties of Ni particles is described. A quantitative analysis of surface acid-base properties of Ni particles was performed using non-aqueous titration. Dimethylamino ethanol and acetic acid were used as probe molecules to detect surface acid-base amounts of Ni particles. The dispersion system was designed on the basis of the amounts of surface acid-base sites on the Ni particle surface. Rheological behavior and agglomerate particle size data demonstrate that the dispersion stability of the designed Ni suspension is markedly improved, as expected. Therefore, the design strategy to improve the dispersion stability of Ni particles was successful. This strategy is expected to be applicable to dispersion systems of other particles suspended in a non-aqueous medium.     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

非水溶剂快速挥发法合成大孔径高有序度介孔有机氧化硅材料

利用非水溶剂快速挥发的方法,以三嵌段共聚物P123等作为结构导向剂,双三乙氧硅基乙烷作为硅源,合成出一系列大孔径(>4nm)、高有序度、具有二维六角结构并且墙壁中含双亚甲基的介孔有机氧化硅(PMO)材料,并通过XRD、TEM、N₂吸附-脱附、29SiNMR和SEM等方法对材料进行了表征.