整体式Pt/γ-Al2O3/Ce0.5-xZr0.5-xMn2xO2催化剂低温催化燃烧饮食油烟

 采用固定床反应器评价了整体式催化剂 Pt/γ-Al2O3/Ce0.5-xZr0.5-xMn2xO2 去除饮食油烟的催化性能. 制备了一系列不同 Mn 含量的 Ce0.5-xZr0.5-xMn2xO2 储氧材料, 并考察了其作为载体对 Pt/γ-Al2O3/Ce0.5-xZr0.5-xMn2xO2 催化剂活性的影响. 应用 X 射线衍射 (XRD)、N2 物理吸附和 H2 程序升温还原 (H2-TPR) 等手段对催化剂进行了表征. XRD 结果表明, 贵金属 Pt 很好地分散在载体 γ-Al2O3 和 Ce0.5-xZr0.5-xMn2xO2 上. N2 物理吸附和 H2-TPR 研究结果与催化剂活性测试能很好吻合. 催化剂的活性顺序为 x = 0.10 > x = 0.15 > x = 0.05 > x = 0 > x = 0.20, Pt/γ-Al2O3/Ce0.4Zr0.4Mn0.2O2 催化剂活性最好, 油烟完全转化温度仅为 495 K.     

Ce0.5Zr0.5O2修饰的Ni/SiC、Fe/SiC和Co/SiC催化燃烧甲烷性能

以铈锆固溶体(Ce0.5Zr0.5O2)修饰的高比表面积SiC为载体,采用两步浸渍法制备了Ni、Fe和Co基催化剂,研究了其在煤层气催化燃烧脱氧中的催化活性和稳定性.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、电感耦合等离子体质谱(ICP-MS)、高分辨透射电子显微镜(HRTEM)、比表面积(BET)、热重分析(TGA)和H2程序升温还原(H2-TPR)对催化剂进行了表征.分析结果表明,Ni、Fe和Co部分进入Ce0.5Zr0.5O2固溶体晶格内部,导致催化剂体相形成更多的缺陷;同时Ce0.5Zr0.5O2固溶体有助于加速金属氧化物和金属之间氧化还原过程的进行,促进了氧吸附、传输和对甲烷的活化.另外,SiC和Ce0.5Zr0.5O2固熔体良好的抗积碳性能,有效避免了催化剂在富甲烷反应气氛中因积碳而失活,从而使三种催化剂均具有优良的催化燃烧脱氧活性和稳定性.其中,Co/Ce0.5Zr0.5O2/SiC活性最高,可在320℃活化催化甲烷,并在410℃实现完全脱氧.     

Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟

以CexZr1-xO2固溶体做载体,制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂(x=1,0.75,0.5,0.25,0).应用Brunauer-Emmet-Teller(BET)比表面积分析、X射线衍射(XRD)和H2程序升温还原(H2-TPR)等手段对催化剂进行相关表征,并系统研究了催化剂在饮食油烟催化燃烧中的催化活性.BET结果表叫催化剂的比表面积随Ce/Zr摩尔比的减小而减小.XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上.H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好.催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧,降低了反应温度.随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化,催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2＞Pt/γ-Al2O3/Ce0.25Zr0.75O2＞Pt/γ-Al2O3/Ce0.75Zr0.25O2＞Pt/γ-Al2O3/CeO2＞Pt/γ-Al2O3/ZrO2.     

Ce0.5Zr0.5O2修饰的Ni/SiC、Fe/SiC和Co/SiC催化燃烧甲烷性能

以铈锆固溶体(Ce0.5Zr0.5O2)修饰的高比表面积SiC为载体,采用两步浸渍法制备了Ni、Fe和Co基催化剂,研究了其在煤层气催化燃烧脱氧中的催化活性和稳定性.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、电感耦合等离子体质谱(ICP-MS)、高分辨透射电子显微镜(HRTEM)、比表面积(BET)、热重分析(TGA)和H2程序升温还原(H2-TPR)对催化剂进行了表征.分析结果表明,Ni、Fe和Co部分进入Ce0.5Zr05O2固溶体晶格内部,导致催化剂体相形成更多的缺陷;同时Ce0.5Zr0.5O2固溶体有助于加速金属氧化物和金属之间氧化还原过程的进行,促进了氧吸附、传输和对甲烷的活化.另外,SiC和Ce0.5Zr0.5O2固熔体良好的抗积碳性能,有效避免了催化剂在富甲烷反应气氛中因积碳而失活,从而使三种催化剂均具有优良的催化燃烧脱氧活性和稳定性.其中,Co/Ce0.5zr0.5O2/SiC活性最高,可在320 ℃活化催化甲烷,并在410 ℃实现完全脱氧.     

Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟

以CexZr1-xO2固溶体做载体, 制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂(x=1, 0.75, 0.5, 0.25, 0). 应用Brunauer-Emmet-Teller (BET)比表面积分析、X射线衍射(XRD)和H2程序升温还原(H2-TPR)等手段对催化剂进行相关表征, 并系统研究了催化剂在饮食油烟催化燃烧中的催化活性. BET结果表明催化剂的比表面积随Ce/Zr摩尔比的减小而减小. XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上. H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好. 催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧, 降低了反应温度. 随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化, 催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2>Pt/γ-Al2O3/Ce0.25Zr0.75O2>Pt/γ-Al2O3/Ce0.75Zr0.25O2>Pt/γ-Al2O3/CeO2>Pt/γ-Al2O3/ZrO2.     

载体焙烧温度对稀燃天然气汽车尾气净化Pd/Zr0.5Al0.5O1.75催化剂性能的影响

以不同温度焙烧得到的Zr0.5Al0.5O1.75复合氧化物为载体,制备了系列1.5%Pd/Zr0.5Al0.5O1.75催化剂样品.采用N2吸附-脱附、X射线衍射、H2程序升温还原、O2程序升温脱附及CO化学吸附等手段对催化剂进行了表征,并测试了催化剂在模拟稀燃天然气汽车尾气中的活性和抗H2O中毒性能.结果表明,载体...     

(Ag/Al2O3+Cu/Ce(x)/Al2O3)组合催化剂催化乙醇选择性还原NOx及其副产物的消除

制备了Cu/Ce(x)/Al2O3(x为Ce与Al的摩尔比)系列氧化催化剂,并考察了(Ag/Al2O3 Cu/Ce(x)/Al2O3)组合体系催化乙醇还原NOx以及氧化去除反应副产物(CO和未完全燃烧的碳氢化合物)的活性.在200～350℃温度区间,组合催化剂具有与Ag/Al2O3相似的NOx去除效率.随着Ce/Al比增加,氧化催化剂去除CO的活性逐渐提高.Cu/CeO2催化剂具有最好的氧化活性,但其对NOx的去除有较大影响.综合考虑NOx转化率以及CO和HC的去除效果,(Ag/Al2O3 Cu/Ce(0·15)/Al2O3)是最佳的催化剂组合体系.通过对此系列氧化催化剂的BET比表面积、XRD、H2-TPR以及XPS等表征结果的分析,发现Cu和Ce之间的相互作用是催化剂氧化CO能力提高的主要原因.     

Cu_xCo_(1-x)/Al_2O_3/FeCrAl整体式催化剂上甲苯催化燃烧(英文)

以FeCrAl合金薄片为基底,Al2O3浆料为过渡胶体,不同摩尔比的Cu、Co为催化活性组分,制备了一系列CuxCo1-x/Al2O3/FeCrAl(x=0-1)新型整体式催化剂.采用X射线粉末衍射(XRD),扫描电子显微镜(SEM),X光电子能谱(XPS)和程序升温还原(TPR)等手段对催化剂的结构进行了表征.在微型固定床反应器上评价了催化剂的催化甲苯燃烧性能.研究结果表明:在所制备的整体式催化剂上,当Cu含量比较低时,形成了Cu-Co-O固溶体;当Cu含量比较高时,可以测得CuO的衍射峰.催化剂表面颗粒大小和形貌与Cu、Co摩尔比密切相关.在催化剂表面,Co以Co2+和Co3+价态存在,而Cu主要以Cu2+价态存在.催化剂中的Cu可以改善Co的氧化还原性,从而有利于催化剂活性的提高.在所制备的催化剂中,Cu0.5Co0.5/Al2O3/FeCrAl催化剂具有最好的活性,甲苯在374oC可以完全催化燃烧消除.     

Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比对整体式铁基催化剂上稀薄甲烷燃烧的影响

采用共沉淀法和胶溶法分别制备了高性能的储氧材料Ce0.45Zr0.45Y0.07La0.03O1.95(OSM)和耐高温高比表面的La-Ba-Al2O3,并以它们为载体,制备了一系列整体式铁基催化剂.考察了该系列催化剂对甲烷稀薄燃烧的催化性能.并用低温N2吸附-脱附,储氧量(OSC)测试,X射线衍射(XRD)和H2程序升温还原(H2-TPR)等测试手段考察了不同Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比对催化剂特性的影响.活性测试结果表明,当Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比为1:1时新鲜和老化催化剂的活性均最好,新鲜催化剂可在50000h-1的高空速条件下使含量为1%(体积分数)的甲烷在446℃起燃,553℃完全转化;低温氮气吸附-脱附测试结果和H2-TPR表明,不同的Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比使催化剂表现出不同的织构性能和还原性能;XRD测试结果表明,OSM以均一固溶体存在,Fe高度分散在载体上.综合以上表征手段得出:合适的Ce0.45Zr0.45Y0.07La0.03O1.95/La-Ba-Al2O3质量比导致催化剂具有优异的稀薄甲烷催化燃烧活性和热稳定性.     

MnO2-CeO2/Ti0.25Zr0.25Al0.5O1.75整体式催化剂的低温NH3选择性催化还原NO性能研究

采用共沉淀法制备了TiO2、Ti0.5Zr0.5O2(TZ)和Ti0.25Zr0.25Al0.5O1.75载体材料,并以MnO2和CeO2为活性组分,以T、TZ和TZA为载体,制备了3种整体式催化剂.对催化剂进行了低温N2吸附脱附、储氧量(OSC)、NH3-TPD和XPS的表征,并研究了3种催化剂在过量O2存在下的低温NH3-选择催化还原(NH3-SCR)活性及其抗H2O和SO2性能.结果指出,MnO2-CeO2/Ti0.25Zr0.25Al0.5O1.75(TZAC)有最大的比表面积、孔容和储氧能力、最强的表面酸性和最大的表面酸量.而这对选择催化还原(SCR)反应至关重要.活性测试结果指出,TZAC有最好的低温SCR活性和最宽的活性温度窗口.NO在102℃起燃(转化率为50%),在175～325℃之间NO转化率接近100%,而且TZAC表现出了较强的抗H2O和SO2性能.     

Catalytic Combustion of Ethyl Acetate over Al2O3- Ce0.5Zr0.5O2 Supported Metal Oxide Catalysts

The catalysts for the combustion of ethyl acetate were prepared using Fe, Co, Cu, Cr, and Mn metal oxide as active components supported on Al₂O₃-Ce_0.5Zr_0.5O₂ mixed oxides and characterized by X-ray diffraction (XRD), temperature programmed reduction (TPR), oxygen storage capacity measurement, BET surface area, XPS measurement, and activity test. According to the results of characterization, it was found that Cu/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2, mass ratio) and Mn/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2) catalysts presented excellent activity for the catalytic combustion of ethyl acetate, because of the more reducible species and high reducibility of the catalysts. For ethyl acetate oxidation, more than 99% conversion was achieved at 245 °C over catalysts Cu/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2) and Mn/Al₂O₃-Ce_0.5Zr_0.5O₂ (1:2, mass ratio), indicating that the catalysts had great potential for wide use.     

Ce0.5+xZr0.4-xLa0.1O2-Al2O3催化剂催化燃烧柴油车碳烟

采用共沉淀法制备了系列Ce_0.5+xZr_0.4-xLa_0.1O₂-Al₂O₃催化剂, 其中0≤x≤0.4且Ce_0.5+xZr_0.4-xLa_0.1O₂与Al₂O₃的质量比为1:1. 考察了该系列催化剂对柴油车排放碳烟的催化燃烧性能, 并用低温N2吸附-脱附、X射线衍射(XRD)、X射线光电子能谱(XPS)、氢气程序升温还原(H₂-TPR)和氧气程序升温脱附(O₂-TPD)等手段对催化剂进行了表征. 研究结果表明该系列催化剂均形成了具有立方萤石结构的固溶体. 当x=0.2时, Ce³⁺离子在催化剂表面有一定的富集, 此时催化剂具有最大的β氧脱附峰和最好的表面还原性能, 同时具有良好的催化碳烟氧化活性, 碳烟在该催化剂的起燃温度为360 °C, 具有较好的应用前景.     

Ce0.50Zr0.50O2中掺杂M(M = Mn,Y)对乙酸乙酯燃烧催化剂MnOx/Ce0.50-zZr0.50-zM2zOy/Al2O3性能的影响

考察了乙酸乙酯催化燃烧时,铈锆固溶体中掺杂M (M = Mn, Y)对催化剂MnO_x/Ce_0.50-zZr_0.50-zM_2zO_y/Al₂O₃活性的影响。结果表明: Mn的掺杂明显增加了储氧材料的储氧量(OSC),Y的掺杂明显降低了催化剂的还原温度;Mn 和Y的同时掺杂兼具Mn掺杂和Y掺杂的优点。催化剂MnO_x/Ce_0.40Zr_0.40Mn_0.10Y_0.10O_y/Al₂O₃ 性能最佳,完全转化温度为513K,且T_10% 和 T_100%间隔的温度范围最窄,可适用于较大初始浓度变化范围和较高空速(GHSV)条件下的乙酸乙酯净化。H₂程序升温还原(H₂-TPR)和X射线衍射(XRD)测试显示,MnO_x/Ce_0.40Zr_0.40Mn_0.10Y_0.10O_y/Al₂O₃具有较低的还原温度和较大的还原峰面积; Mn 和Y进入铈锆固溶体的晶格,改善了其织构性能,促进了锰氧化物在载体表面的分散。     

Mn_xCo_(2.5-x)Al_(0.5)O_4尖晶石型三元复合氧化物催化分解N_2O(英文)

用溶胶凝胶法制备了一组Mn_xCo_(2.5-x)Al_(0.5)O_4尖晶石型三元复合氧化物,用于有氧气氛下的N_2O催化分解反应.用N_2物理吸附、X射线衍射(XRD)、扫描电镜(SEM)、H_2程序升温还原(H_2-TPR)、O_2程序升温脱附(O_2-TPD)、X射线光电子能谱(XPS)等技术对催化剂进行了结构表征,考察了催化剂组成、母液pH、K负载量等制备参数对其催化活性的影响.结果表明:K的加入弱化了催化剂表面的金属-氧化学键,有利于表面氧物种的脱除,改性催化剂有较高的催化活性和抗水性,其中母液pH=2、K/(Mn+Co)比为0.02的K/Mn_(0.2)Co_(2.3)Al_(0. 5)O_4催化剂活性较高,该催化剂在有氧、有氧有水气氛400℃连续反应50 h,N_2O转化率分别达98.5%和76.5%.     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

Catalytic Combustion of Methane over MnOx／ZrO2-Al2O3 Catalysts

MnOx/Al2O3 and MnOx/ZrO2-Al2O3 catalysts were prepared by incipient wetness impregnation of Mn(CH3COO)2 on the corresponding supports, followed by the characterization using X-ray diffraction (XRD). temperature programmed reduction (TPR) and BET surface area techniques. The result shows the BET surface area of ZrO2-Al2O3 is lower than that of Al2O3 due to the loading of ZrO2.However tile resulted MnOx/ZrO2-Al2O3 catalyst exhibits higher activity for methane combustion than MnOx/Al2O3, because the addition of ZrO2 onto Al2O3 is beneficial for the dispersion of Mn species and the improvement of the lattice oxygen activity in MnOx. subsequently the activation of methane during combustion. The optimum loading of Zr in MnOx/ZrO2-Al2O3 is in the range of 5%-10% correlated with the calcination temperatures of catalyst supports.     

Effects of Carrier on CuO／TiO2 and CuO／Ti0.5Zr0.5O2 Catalysts in the NO＋CO Reaction

Using TiO2 and Ti0.5Zr0.5O2 as carriers, the CuO/TiO2 and CuO/Ti0.5Zr0.5O2 catalysts were prepared by the impregnation method with Cu(NO3)2 as active component. The catalytic activities in NO CO reaction were investigated using a microreactor-GC system, and structure and reducibility of catalysts were characterized by means of physical adsorption, TPR, XRD, NO-TPD technologies. It was found that the activity of CuO/Ti0.5Zr0.5O2 catalyst was higher than that of CuO/TiO2, probably due to the large specific surface area of Ti0.5Zr0.5O2 that played an important role in NO CO reaction.     

CuxCo1-x/Al2O3/堇青石整体式催化剂的制备及其催化甲苯燃烧性能

以堇青石蜂窝陶瓷为基底,A12O3浆料为过渡胶体,Cu和Co为催化活性组分,制备了一系列CuxCo1-x/Al2O3/堇青石(x=0～1)整体式催化剂.采用X射线衍射、X射线光电子能谱、扫描电镜和程序升温还原等手段对催化剂进行了表征.以甲苯为模型化合物.在微型固定床反应器上评价了催化剂的催化性能.结果表明,当Cu含量较...     

MnOx/Al2O3/Ce0.45Zr0.45M0.10Oy （M = Mn, Y, La） catalysts used for ethanol catalytic combustion

MnOx/Al2O3/Ce0.45Zr0.45M0.10Oy (M = Mn,Y,La) catalysts were prepared by impregnation method and characterized by BET,TPR and XRD analyses.The catalytic activities toward ethanol combustion were investigated in a microreactor.The results demonstrated that the catalytic activity of MnOx/Al2O3/Ce0.50Zr0.50O2 monolithic catalyst could be improved by doping Mn,Y and La into Ce0.50Zr0.50O2.When doping Y into Ce0.50Zr0.50O2,the catalyst MnOx/Al2O3/Ce0.45Zr0.45Y0.10O1.95 showed the highest activity.The 100% conversion temperature of ethanol was 230 ℃.Furthermore,once the conversion of ethanol started,the complete conversion was quickly achieved.The doping of Mn,Y and La led to better activity for ethanol combustion and lower temperature reduction peaks in TPR profiles.The doping of Mn resulted in enhanced oxygen storage capacity (OSC),larger area of the reduction peaks,and excellent reactivity,and the doping of Y resulted in the lowest reduction temperature and the best activity.