硅胶表面水胺硫磷分子印迹聚合物的制备及其性能

以水胺硫磷为模板分子,甲基丙烯酸(MAA)为功能单体,三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,采用表面分子印迹技术,以商品化硅胶为基体,合成了对有机磷农药水胺硫磷具有良好选择性的表面分子印迹聚合物(MIP)。用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析等技术分别对表面印迹聚合物进行了结构表征和表面形态观察;静态吸附平衡实验和Scatchard分析表明,该印迹聚合物中存在着两类不同的结合位点,离解常数分别为4.84×10-3和15.2×10-3mol/L。与非印迹聚合物相比,MIP对水胺硫磷有较大的特异性吸附能力,其印迹因子为2.73。     

L-肉碱分子表面印迹聚合物的制备及其识别性能研究

以L-肉碱(L-carnitine)作为印迹模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,采用硅胶表面分子印迹技术合成了L-肉碱分子印迹聚合物(MIP)和非印迹聚合物(NMIP).通过紫外光谱研究了MAA与L-肉碱之间的结合作用.利用IR和SEM测试分别对产物进行了结构表征和表面形貌观察,说明分子印迹聚合物成功接枝到了硅胶表面.吸附动力学实验结果表明,MIP对L-肉碱有较好的识别性和吸附性;Scatchard分析表明该印迹聚合物中存在着一类等价的结合位点,最大表观结合量为71.00μmol/g,离解常数Kd=2.76×10-4mol/L;选择性吸附实验结果表明,MIP对L-肉碱的吸附结合量高于其D型异构体和其他类似物;拆分实验结果表明,MIP对DL-肉碱的拆分有一定作用.     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

分子印迹固相萃取牛奶中甲胺磷

以甲胺磷为印迹分子、α-甲基丙烯酸为功能单体及三羟甲基丙烷三丙烯酸酯为交联剂,通过悬浮聚合法制备甲胺磷分子印迹聚合物(MIP)微球,并用该聚合物进行了牛奶中甲胺磷残留的固相萃取研究.静态吸附实验表明,在结构相似物乙酰甲胺磷和水胺硫磷为竞争底物存在下,MIP对甲胺磷有良好的吸附识别能力.在优化条件下,印迹分子的固相萃取回收率达96.4%,能够用于甲胺磷的富集,而空白聚合物却不具备这样的特性.当实际牛奶样品中甲胺磷、乙酰甲胺磷和水胺硫磷加标水平为100μg/kg时,甲胺磷回收率达87.4%,乙酰甲胺磷和水胺硫磷的回收率低于15%.结果表明分子印迹固相萃取对甲胺磷有很好的专一选择性,且回收率能够满足农药残留分析要求.在相同实验条件下,与C18固相萃取柱进行比较,分子印迹固相萃取的选择性及样品净化能力优势明显.     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

牛血红蛋白印迹聚合物的制备及其对牛血红蛋白的吸附特性

以牛血红蛋白为模板分子,丙烯酰胺为功能单体,N,N’-亚甲基双丙烯酰胺为交联剂,采用醛基硅胶表面修饰技术,合成了牛血红蛋白印迹聚合物（MIP）,并研究了该印迹聚合物对牛血红蛋白的吸附特性。结果表明:当洗脱时间为8 h、洗脱率为83.53%时,印迹聚合物对牛血红蛋白的吸附量为81.39 mg·g^-1。     

谷胱甘肽磁性分子印迹聚合物的制备及吸附性能研究

采用表面分子印迹技术,以谷胱甘肽（GSH）为模板分子,N-乙烯基吡咯烷酮（NVP）和丙烯酰胺（AM）为功能单体,N,N’-亚甲基双丙烯酰胺（MBA）为交联剂,γ-（甲基丙烯酰氧）丙基三甲氧基硅烷（KH570）改性的Fe₃O₄纳米颗粒为磁性载体,制备了对GSH有特异识别性的磁性分子印迹聚合物（GSH-MMIPs）. 利用X射线衍射仪（XRD）、透射电子显微镜（TEM）、红外光谱（FT-IR）和振动样品磁强计（VSM）对聚合物进行了表征,结果表明磁性载体表面成功地包覆了分子印迹聚合物薄层. 静态吸附平衡实验和Scatchard分析结果表明,GSH-MMIPs中存在两类不同的结合位点,平衡解离常数分别为8.786×10^-4 mol/L和5.424×10^-3 mol/L,最大吸附量分别为49.195 mg/g和155.003 mg/g. 与化学组成相同的磁性非印迹聚合物（GSH-MNIPs）相比,GSH-MMIPs对谷胱甘肽有较高的选择吸附性能.     

克百威分子印迹聚合物的合成及其性能评价

以克百威为模板分子,甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,采用沉淀聚合的方法制备了克百威分子印迹聚合物。通过红外光谱分析得到模板和功能单体的最佳配比为n(carbofuran)∶n(MAA)=1∶6。印迹聚合物的红外光谱测定结果表明,聚合物中存在与模板分子相互作用的特征基团;从印迹聚合物的扫描电镜图观察到分子印迹聚合物(MIP)与空白聚合物(NIP)的表面形态不同,可推论MIP存在与模板分子相互识别的结合位点。通过静态平衡结合法研究了模板分子聚合物的吸附能力、结合动力学和选择特性。结果表明,与非印迹聚合物相比,印迹聚合物对克百威具有较强的吸附特性和很好的专一选择性,3h后基本达到最大吸附量。采用固相萃取柱预处理样品,用高效液相色谱法测定自来水中10、50、100mg/L克百威的加标回收率为94%～117%,相对标准偏差(n=3)为2.5%～4.7%。     

虚拟模板/硅胶表面分子印迹材料的制备及其在海水溶液中的吸附行为研究

以萘乙酸为虚拟模板,以甲基丙烯酸为功能单体、二甲基丙烯酸乙二醇酯为交联剂,用表面聚合-牺牲硅胶法合成了孔状结构的萘分子印迹聚合物.采用红外光谱、扫描电镜和N2吸附实验对印迹聚合物进行了表征;运用理论化学计算探讨了功能单体的筛选方法;利用平衡吸附法考察了印迹材料对海水中萘、蒽、菲化合物选择识别特性.实验表明: 以α-萘乙酸分子为模板的分子印迹聚合物对萘具有较好的识别能力.另外,由于α-萘乙酸分子中羧基的存在,使得分子印迹聚合物(MIP)的印迹空穴又与菲的体积大小相匹配,所以也表现出对菲的独特吸附能力.制备的印迹材料可望用于海水中2～3环多环芳烃的选择性吸附与富集.     

非诺贝特印迹聚合物的制备与性能研究

以非诺贝特(FNB)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了FNB分子印迹聚合物(MIP)。IR和SEM表征的结果显示:FNB分子印迹聚合物中存在与模板分子相互作用的特征基团,与空白聚合物(NIP)的表面形态显著不同,说明MIP存在与模板分子相互识别的结合位点。采用静态平衡结合方法和Scatchard模型评价了FNB分子印迹聚合物的结合特性和识别机理,并考察了其选择性吸附能力。结果表明,FNB分子印迹聚合物存在能量相异的两类特异性结合位点,对FNB具有高选择吸附特性,饱和吸附量为6.363mg/g。     

沉淀聚合法制备三聚氰胺分子印迹聚合物微球

以三聚氰胺为模板分子,以甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在乙腈-乙二醇(20∶1,V/V)混合溶剂中沉淀聚合制备了分子印迹聚合物微球.利用1H-NMR和紫外光谱方法研究了模板与功能单体相互作用情况.结果表明,三聚氰胺与甲基丙烯酸(MAA)分子通过协同氢键作用形成1∶2型氢键配合物.利用扫描电镜和红外光谱对聚合物微球的结构进行了表征.结果表明,印迹聚合物近似圆球形,粒径约为400～500 nm,且大于非印迹聚合物微球,表面存在大量的结合位点.通过静态平衡吸附实验研究了聚合物微球对模板分子的结合能力,印迹聚合物微球在4 h后逐渐达到吸附平衡,Scatchard分析表明,印迹聚合物微球主要存在两类不同的结合位点,最大表观结合量(Qmax)和平衡离解常数(Kd)分别为Qmax1=22.97μmol/g,Kd1=0.14×10-3 mol/L;Qmax2=157.65μmol/g,Kd2=2.55×10-3 mol/L,计算得出表观印迹效率和有效印迹效率分别为68%和58%.此方法合成的印迹聚合物微球对三聚氰胺有较好的结合性能,可应用于三聚氰胺的分离检测.     

Flow injection chemiluminescence sensor using core-shell molecularly imprinted polymers as recognition element for determination of dapsone

This paper reports the preparation of dapsone (DDS) imprinted polymer layer-coated silica submicron particles (SiO(2)) combined with chemiluminescence (CL) toward analysis of tracing DDS in practical samples. To induce the selective occurrence of surface polymerization, the amino groups were first grafted at the surface of SiO(2) by the (3-aminopropyl)triethoxysilane (APTES). The molecularly imprinted polymers (MIP) were coated at the surface of modified SiO(2) by the graft copolymerization. After the removal of templates, recognition sites of DDS were exposed in the polymer layers. The DDS-imprinted products were characterized by FT-IR, SEM, TEM, dynamic adsorption, and static adsorption tests. The proximity between the thickness of MIP layer and the spatial size of DDS indicated that the imprinted sites almost situated at the surface of MIP, leading to rapid adsorption saturation within 90 min. The apparent maximum binding amount of MIP toward DDS was evaluated as 14.98 mg·g(-1), which was much higher than that of non-molecularly imprinted polymers. The CL sensor provided a wide linear range for DDS within 1.0 × 10(-6) to 1.0 × 10(-4) mol·L(-1) with a detection limit of 5.27 × 10(-7) mol·L(-1) and the relative standard deviation of 1.8 % (n = 11) by determinations of 5.0 × 10(-6) mol·L(-1) DDS. This method was applied to determine DDS in urine samples and satisfactory results were obtained.     

右旋邻氯扁桃酸分子印迹聚合物的制备及结合特性研究

以右旋邻氯扁桃酸为模板分子合成了具有高选择性的分子印迹聚合物作为手性分离材料 .紫外光谱研究说明在聚合开始之前模板分子与功能单体形成了配合物 ,并用Hyperchem软件模拟其分子结构 ,结合能分别为 -1 643 7× 1 0 4 J·mol- 1 和 -4 2 799× 1 0 4 J·mol- 1 .分子印迹聚合物对模板分子的结合量高于其它类似物 ,手性分离因子α达 1 76.Scatchard分析表明分子印迹聚合物在识别右旋邻氯扁桃酸分子过程中存在两类结合位点 ,与配合物模拟结构数目一致     

橄榄醇分子印迹聚合物的制备及评价(英文)

以橄榄醇为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,甲苯和十二醇为溶剂,通过本体聚合法制备了橄榄醇分子印迹聚合物。利用平衡结合实验、扫描电镜(SEM)及红外光谱(FTIR)对分子印迹聚合物(MIP)进行了表征,并用该聚合物进行了加标麦麸中橄榄醇的固相萃取(SPE)研究。平衡结合实验表明MIP对模板分子具有更好的识别性。Scatchard分析表明对橄榄醇分子的吸附存在2类不同结合位点,其中高亲和力结合位点和低亲和力结合位点的解离常数分别为0.021和1.002 mmol/L,相应的最大表观结合量分别为18.74和135.9 μmol/g。在优化的固相萃取条件下,MIP固相萃取柱对加标麦麸中橄榄醇的回收率达到97.8%~98.8%,相对标准偏差为2.8%~4.2%(n=5),线性范围为0.1~100 mg/L,检出限(S/N=3)为0.062 mg/L。与非印迹聚合物(NIP)柱及市售聚苯乙烯/二乙烯基苯(PLS)柱相比,MIP柱的选择性更强,回收率更高,纯化效果更好。     

Preparation and characterization of a molecularly imprinted polymer by grafting on silica supports: a selective sorbent for patulin toxin

A new molecularly imprinted polymer (MIP) has been prepared on silica beads using the radical “grafting from” polymerization method for selective extraction of minor contaminant mycotoxin of patulin (PTL). After the introduction of amino groups onto the silica surface with 3-aminopropyltriethoxysilane, azo initiator onto the silica surface was achieved by the reaction of surface amino groups with 4,4′-azobis(4-cyanopentanoic acid). The scale-up synthesis of MIP was then carried out in the presence of 6-hydroxynicotinic acid as template substitute, functional, and cross-linking monomers. The prepared sorbent was characterized using FT-IR spectroscopy, scanning electron microscopy, elemental analysis, and the adsorption–desorption selectivity, and the capacity characteristic of the polymer was investigated by a conventional batch adsorption test and Scatchard plot analysis. The results indicated that coated polymers had specific adsorption to PTL as compared with its co-occurring 5-hydroxymethyl-2-furaldehyde (hydroxymethylfurfural (HMF)), at the same bulk concentration for solution of PTL and HMF, the maximum absorbance in the solid-phase extraction (SPE) method to PTL were 93.97% or 0.654 μg/mg while to HMF they were 76.89% or 0.496 μg/mg. Scatchard analysis revealed that two classes of binding sites were formed in PTL-MIP with dissociation constants of 3.2 × 10⁻² and 5.0 × 10⁻³ mg/mL and the affinity binding sites of 8.029 and 1.364 mg/g, respectively. The recoveries of PTL were more than 90% for the developed MISPE and around 75% for the traditional liquid–liquid extraction in spiked apple juice samples. It was concluded that the method is suitable for the scale-up synthesis of PTL-MIP grafted on silica, and the polymer can be effectively applied as SPE coupled with high-performance liquid chromatography (HPLC) for the determination of PTL in apple juice or other related products.     

Colorimetric detection of morphine in a molecularly imprinted polymer using an aqueous mixture of Fe and [Fe(CN)6]

In this work, a molecularly imprinted polymer (MIP) of morphine (MO) was prepared through thermal radical copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of MO templates, and a molecularly imprinted sorbent assay (MIA) based on a colorimetric reporter was developed to determine the adsorption isotherm of MO-MIP binding. In practice, the MO-bound MIP was brought into contact with an aqueous mixture of Fe³⁺ and [Fe(CN)₆]³⁻ so that the 3-phenolic group of MO was oxidized and Fe³⁺ was reduced to Fe²⁺. As a result, the MO-bound MIP was stained with Prussian blue (PB), which was attributed to the instant co-precipitation of Fe²⁺ and [Fe(CN)₆]³⁻ (K_sp=10⁻⁴⁰). Accordingly, MO-MIP binding of the blue dye could be detected by visible spectroscopy. In addition, such staining could successfully distinguish MO from codeine. Upon data analyses, a two-site binding isotherm with two dissociation constants of 6.00×10⁻⁵ and 1.03×10⁻³ M was found for MO-MIP binding. MIAs for non-MIP were also performed. In addition, the results of flow-system characterizations and the particle size effect are also described in this paper.     

Molecular sensing of 3-chloro-1,2-propanediol by molecular imprinting

A covalent interaction-based molecularly imprinted polymer (MIP) material for 3-chloro-1,2-propanediol (3-MCPD), a post-testicular anti-fertility agent and possible carcinogen and mutagen in food products containing acid-hydrolyzed vegetable proteins, has been successfully fabricated using 4-vinylphenylboronic acid as the functional monomer. Rebinding assay revealed that the binding constant, K_B, for the receptor sites and non-specific sites are 1.93±0.1×10⁴ and 2.74±0.7×10² M⁻¹, respectively. The estimated number of receptor site, B_max, imprinted is 123.3±3 μmol/g of MIP. The MIP material is able to act as a potentiometric chemosensor for 3-MCPD via increase in Lewis acidity of the receptor sites upon reaction of the arylboronic acid with 3-MCPD to form the more acidic arylboronic acid esters. A simple pH glass electrode is sufficient to monitor the analyte-specific rebinding. In unbuffered aqueous media, linear potentiometric response from 0 to 350 ppm of 3-MCPD can be achieved. The MIP-based chemosensing in a soya sauce matrix has also been attempted. It is found that the dynamic range of the potentiometric chemosensing response of the MIP material is much reduced, probably due to the blocking or deactivation of receptor sites by interferents in soya sauces. Nevertheless, the present work demonstrated the feasibility of using MIP-based chemosensors as semi-quantitative analytical tools for screening purposes in quality control of food products.     

Synthesis and characterization of molecularly imprinted polymers for recognition of ciprofloxacin

A molecularly imprinted polymer (MIP), with special molecule recognition properties of ciprofloxacin (CIP), was prepared by thermal polymerization in which ciprofloxacin acted as template molecule, α-methacrylic acid (MAA) acted as functional monomer and trimethylolpropane trimethylacrylate (TRIM) acted as crosslinker. The optimized ratio was determined to be n(CIP): n (MMA):n(TRIM)51:6:16 by investigation of the effects of different concentrations of functional monomer and the crosslinker on the MIP’s recognition properties. Equilibrium binding experiment was used to investigate the adsorption dynamics, the binding ability to template molecule and the substrate selectivity. Scatchard analysis was used to study the MIP’s binding characteristic to template molecule. The results indicated that MIP has higher adsorption ability and selectivity. The equilibrium distribution coefficient K _D was 41.64 and the separation factor α was 1.62. Scatchard analysis showed that two different kinds of binding sites were produced in the polymer matrix and their dissociation constants were calculated to be K _d1 = 5.249 × 10⁻⁵ mol·L⁻¹, K _d2 = 2.237 × 10⁻³ mol·L⁻¹. __________ Translated from Chemistry, 2008, 71(2): 132–137     

Preparation of molecularly imprinted polymer for vanillin via seed swelling and suspension polymerization

Molecularly imprinted polymer (MIP) for vanillin was synthesized successfully by multi-step swelling suspension polymerization using polystyrene (PS) as the “seed”. The PS-MIP was characterized by scanning electron microscopy and equilibrium adsorption method. The results showed that the PS-MIP microsphere had regular spherical morphology and can selectively separate the target analytes. The PS-MIP had two kinds of binding sites, while the non-imprinted polymer using PS as the “seed” (PS-NMIP) only had one kind of binding sites by Scatchard analysis which indicated that specific and non-specific binding interactions existed there. The PS-MIP had proven to show improved binding capacity in comparison with the MIP synthesized by bulk polymerization.     

硅胶表面苯并噻吩分子印迹聚合物的分子识别与吸附性能

选用γ-氨丙基三乙氧基硅烷和α-甲基丙烯酸修饰的硅胶作为载体,以甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇酯为交联剂,苯并噻吩为模板分子,合成一种具有选择性识别苯并噻吩分子的印迹聚合物。采用红外光谱、元素分析及N2吸附对其结构进行了表征,以模拟汽油通过静态吸附对其吸附性能进行了研究。结果表明,在硅胶载体表面成功地嫁接了多孔的分子印迹聚合物薄层。印迹聚合物对苯并噻吩具有良好的识别性能,对苯并噻吩的吸附动力学满足Langergren准一级反应动力学方程,吸附过程属于单分子层吸附。符合Langmuir吸附模型印迹聚合物对苯并噻吩的平衡吸附容量达57.4×10-3,而非印迹聚合物的吸附容量为33.1×10-3。印迹聚合物在经过多次再生后其吸附容量基本不变,从而为在汽油深度脱硫中有效脱除噻吩类硫化物提供了一种新技术途径。