The carbonylation of phenyl bromide and its derivatives under visible light irradiation

The carbonylation of phenyl bromide catalyzed by Co（OAc）₂ has been investigated with PhCOPh as a sensitizer under visible light in the presence of basic additive.With strong base CH₃ONa,PhCOOCH₃ is produced in 70%yield with 100%selectivity,the similar results are also obtained with a stronger base（CH₃）₃CONa.However,with another strong base NaOH,the yield of the ester is only 40%.On the other hand,with weak base NaOAc or（n-C₄H₉）₃N,phenyl bromide cannot be carbonylated.The results of carbonylation of the six substituted phenyl bromides suggest that the activities of o,m,p-BrC₆H₄CH₃ are similar to phenyl bromide, while the activities of o,m,p-BrC₆H₄Cl are higher with the high yields（≥93%） of the corresponding chloro-esters.In addition,the relative position of bromine and chlorine or methyl on phenyl ring has little effect on the activity of the carbonylation.     

常温常压下光促进烯烃与一氧化碳的羰基化反应

 报道了烯烃（环己烯和1－辛烯）与一氧化碳通过光促进实现常温常压非贵金属（钴配合物）催化的羰基化反应．研究发现，以Co（OAc）2为催化剂时，不需要加入光敏剂丙酮就能发生反应；CoSalen，吡啶－2－羧酸钴和大环配合物［Co（14）4，11－diene－N4］I2是较好的催化剂，其催化活性比Co（OAc）2高．其中，吡啶－2－羧酸钴与Co（OAc）2相同，反应中不需要光敏剂存在，其选择性很高．通过氘代丙酮和氘代甲醇同位素实验，进一步证实了反应中双键异构的存在和副产物的分析结果．     

光促进温和条件下烯烃与二氧化碳的羰基化反应

羰基化反应是有机合成化学中常用的方法之一,但常规的羰基化反应大多要求高温(150～200℃)、高压(10～20 M Pa)或使用贵金属催化剂(如钌、铑、铱等),并且C₁源多用一氧化碳^[1].开发和利用CO₂这一丰富的C₁资源,并最大限度地降低其排放量具有挑战意义.但CO₂活化比较困难,在通常条件下难以转化成其它化学品^[2].在光促进下的羰基化反应可克服上述困难,使反应在温和条件及非贵金属催化下完成,同时可用CO₂代替CO作为C₁源,因此这是一个对环境友好的工艺^[3].本文报道烯烃在光促进常温常压和非贵金属钴配合物催化下与二氧化碳的羰基化反应,同时通过¹³CO₂和¹³CH₃OH同位素实验,对反应产物的结构进行了分析.     

Cobalt-catalyzed photopromoted carbonylation of chloroalkanes in the presence of KI

<正>The photopromoted carbonylation of chloroalkanes with carbon monoxide catalyzed by cobalt compounds[Co(OAc)_2,CoCl_2] in the presence of KI was carried out under ambient conditions.The results revealed that the catalytic activity of Co(OAc)_2 was higher than that of CoCl_2.A basic additive NaOAc was beneficial to the reaction.Interestingly,with NaOAc as an additive, Co(OAc)_2 and CoCl_2 exhibited similar catalytic activity.Preliminary work showed that the role of iodide ion was initially to form active iodoalkanes via substituting chloride ion in chloroalkanes in situ,and then,the carbonylation of iodoalkanes proceeded under irradiation.     

功能离子液体复合体系中钯催化的Heck偶联反应

在[BMIM][TPPMS]离子型膦配体和碱性离子液体 [BMIM][OAc] 组成的功能离子液体复合体系中, PdCl2(CH3CN)2可以有效地催化溴苯和丙烯酸乙酯的交叉偶联(Heck)反应, 产物肉桂酸乙酯(反式)的收率达到60%. 锚定在功能离子液体复合体系中的Pd催化剂循环使用11次后仍保持良好的活性和稳定性. 该催化剂体系的良好活性和稳定性可归因于三个方面: [BMIM][TPPMS]和[BMIM][OAc]间的协同配位效应; 以[BMIM][OAc]作为Heck反应的缚酸剂, 避免了无机盐粘稠物的形成; 生成的副产物[BMIM]Br可以有效溶解钯黑, 避免了钯黑的析出. 该离子液体催化体系对不同底物的Heck偶联反应也表现出良好的普适性.     

单波长光照射下Co（OAc）_2催化溴代烃与CO的羰基化反应

对以Co（OAc）2为催化剂,在3种单波长（254、365、380nm）光照射下,溴代烃与CO的羰基化反应的研究结果表明,以溴代烷烃（溴代环己烷、1-溴己烷、1-溴辛烷）为底物,只有254nm的高能光对羰基化反应是有效的,碱性添加物对反应有明显的促进作用;以溴代环己烷为底物,加入NaOAc,环己基甲酸甲酯的产率可由34...     

苯酚氧化羰化合成碳酸二苯酯的新型PdCl2-Co(Pyca)2催化体系

研究了新型的Ｐｄ－Ｃｏ催化体系催化氧化碳化苯酚合成碳酸二苯酯。当ｎ（ＰｄＣｌ２）：ｎ「Ｃｏ（Ⅱ）」：ｎ（四丁基化铵）：ｎ（苯醌）＝１：１：１０：２５,Ｔ＝１２０,Ｐ＝２．５ＭＰａ（Ｐｃｏ／Ｐｏ２＝４：１）,反应时间８ｈ,ＰｄＣｌ２－Ｃｏ（Ｐｙｃａ）２比ＰｄＣｌ２－Ｃｏ（ＯＡｃ）２的催化活性高。当使用ＰｄＣｌ２－Ｃｏ（Ｐｙｃａ）２催化剂时,ＤＰＣ的产率为６．０３％。最佳的反应温度是１２０℃,ＤＰＣ的产率随着体系的总压增加而增大,当压力升到３．５ＭＰａ时,ＤＰＣ产率为８．５３％。     

光促进下N,N-二甲基甲酰胺作为一氧化碳源的烯烃氢酯化反应

 研究了光照下以N,N-二甲基甲酰胺(DMF)为一氧化碳源的烯烃氢酯化反应. 结果表明,在常温常压和光照射条件下DMF可以分解得到CO,新生成的CO在光促进下可以直接与CH3OH-DMF溶液中的底物1-辛烯在温和条件和非贵金属钴化合物(Co(OAc)2,CoCl2,Co(en)3Cl2和大环钴[Co(14)4,11-二烯-N4]I2)催化下进行氢酯化反应,反应中DMF既是溶剂,又是原料. H13CON(CH3)2同位素示踪实验证实了这一结果. 在反应体系中通入二氧化碳可以大大提高反应的转化率、产率及选择性. 13CO2同位素示踪实验表明,CO2并未参与产物的形成,其作用是中和DMF分解产生的HN(CH3)2,从而有利于DMF的光促分解.     

Exchange of organic radicals with organo-cobalt complexes formed in the living radical polymerization of vinyl acetate

Exchange of organic radicals between solution and organo-cobalt complexes is experimentally observed and the reaction pathway is probed through DFT calculations. Cyanoisopropyl radicals from AIBN (2,2'-azobisisobutyronitrile) enter solutions of cobalt(II) tetramesityl porphyrin ((TMP)Co(II)*, 1) and vinyl acetate (VAc) in benzene and react to produce transient hydride (TMP)Co-H and radicals (*CH(OAc)CH2C(CH3)2CN (R1*)) that proceed on to form organo-cobalt complexes (TMP)Co-CH(OAc)CH3 (4, Co-R2) and (TMP)Co-CH(OAc)CH2C(CH3)2CN (3, Co-R1), respectively. Rate constants for cyanoisopropyl radical addition with vinyl acetate and hydrogen atom transfer to (TMP)Co(II)* are reported through kinetic studies for the formation and transformation of organo-cobalt species in this system. Rate constants for near-degenerate exchanges of radicals in solution with organo-cobalt complexes are deduced from (1)H NMR studies and kinetic modeling. DFT computations revealed formation of an unsymmetrical adduct of (TMP)Co-CH(OAc)CH3 (4) with *CH(OAc)CH3 (R2*) and support an associative pathway for radical interchange through a three-centered three-electron transition state [R...Co...R]. Associative radical interchange of the latent radical groups in organo-cobalt porphyrin complexes with freely diffusing radicals in solution that is observed in this system provides a pathway for mediation of living radical polymerization of vinyl acetate.     

Photopromoted carbonylation of 1-bromo-6-chlorohexane under ambient conditions

Photopromoted carbonylation of 1-bromo-6-chlorohexane with CO catalyzed by CuBr2 and CdI2 has been carried out under ambient conditions. The results indicate that the carbonylation proceeds with the major product of chloroester ClCH2（CH2）5COOCH3 under catalysis of CuBr2. Furthermore, the activity of the carbonylation can be improved by addition of basic additives （NaOAc, Na3PO4 or （n-C4H9）3N）. Among these additives, （n-C4H9）3N is the most efficient in terms of the yield of ClCH2（CH2）5COOCH3. However, the methoxycarbonyl substituting chlorine product of BrCH2（CH2）5COOCH3 is not obtained in the presence of CdI2. This is quite different from the carbonylation of monochloroalkane.     

Synthesis and structure of a novel supramolecular Zn3Co8 assembly containing a linear Zn3 core

Reaction of Zn(OAc)(2).2H2O (OAc = acetate) with LH2 in THF followed by reaction with Co2(CO)8 yields the novel supramolecular assembly Zn3L2(OAc)2[Co2(CO)6](4).0.5CH2Cl2, which was characterized by X-ray diffraction (LH2 = (CH2)3(N=CH-2-OH-5-C identical to CSiMe3C6H3)2 or N,N'-propylenebis(2-hydroxy-5-trimethylsilylethynl-1-aldimine).     

Mechanistic studies on direct arylation of pyridine N-oxide: evidence for cooperative catalysis between two distinct palladium centers

Direct arylations of pyridine N-oxide (PyO), a convenient method to prepare 2-arylpyridines, catalyzed by Pd(OAc)(2) and PtBu(3) have been proposed to occur by the generation of a PtBu(3)-ligated arylpalladium acetate complex, (PtBu(3))Pd(Ar)(OAc) (1), and the reaction of this complex with PyO. We provide strong evidence that 1 does not react directly with PyO. Instead, our data imply that the cyclometalated complex [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2), which is generated from the decomposition of 1, reacts with PyO and serves as a catalyst for the reaction of PyO with 1. The reaction of PyO with 1 occurs with an induction period, and the reaction of 1 with excess PyO in the presence of [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) is zeroth-order in 1. Moreover, the rates of reactions of PyO with bromobenzene catalyzed by [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) and [Pd(PtBu(3))(2)] depend on the concentration of [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) but not on the concentration of [Pd(PtBu(3))(2)]. Finally, the reaction of 1 with a model heteroarylpalladium complex containing a cyclometalated phosphine, [(PEt(3))Pd(2-benzothienyl)(tBu(2)PCMe(2)CH(2))], rapidly formed the arylated heterocycle. Together, these data imply that the rate-determining C-H bond cleavage occurs between PyO and the cyclometalated [Pd(OAc)(tBu(2)PCMe(2)CH(2))](2) rather than between PyO and 1. In this case, the resulting heteroarylpalladium complex transfers the heteroaryl group to 1, and C-C bond-formation occurs from (PtBu(3))Pd(Ar)(2-pyridyl oxide). This mechanism proposed for the direct arylation of PyO constitutes an example of C-H bond functionalization in which C-H activation occurs at one metal center and the activated moiety undergoes functionalization after transfer to a second metal center.     

对丙烯腈聚合有高活性的催化体系

铵甲基配合物;对丙烯腈聚合有高活性的催化体系;苯甲酚钠;萘酚钠;季铵盐;催化聚合     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

氯化苄双羰化反应催化剂的研究

苯丙酮酸是合成苯丙氨酸的重要中间体 ,也是重要的动物新陈代谢产物 ,在生物化学和药物学上都有广泛的用途 .例如 ,在泌尿系统疾病的治疗中 ,摄入苯丙酮酸盐 ,可以在酶的作用下 ,结合体内过多的氨生成苯丙氨酸 ,从而降低血氨浓度 ,防止氨中毒 .合成苯丙酮酸的氯化苄双羰化方法应用较广 ,催化剂一般采用钴的配合物如八羰基二钴等 .这种方法一步完成 ,工艺简单 ,产品易分离、收率高 ,与传统的合成方法相比具有很大的优势 [1] .但催化剂八羰基二钴价格比较高 ,且在空气中不稳定 [2 ] .若能实现催化剂的回收再利用 ,对于实现苯丙酮酸的工业化生…     

四羰基钴/咪唑离子液体在羰基化合成丙二酸二甲酯反应中的催化性能

采用原位法合成了不同类型的四羰基钴/咪唑离子液体催化剂, 并考察了其在氯乙酸甲酯羰基化反应中的催化性能. 研究了咪唑环上不同支链对催化活性的影响. 结果表明, 1-丁基-3-甲基咪唑羰基钴离子液体[Bmim][Co(Co)₄]不仅催化活性高, 选择性好, 而且对空气和水有较好的稳定性能. 在p_CO=2.0 MPa, 85 ℃, 反应3 h的条件下, [Bmim][Co(Co)₄]催化剂循环使用4次, 氯乙酸甲酯的平均转化率为94.3%, 丙二酸二甲酯的平均选择性和平均产率分别为98.5%和92.9%. 与传统的Na[Co(Co)₄]催化剂相比, [Bmim][Co(Co)₄]催化剂在保证高活性的条件下可以实现羰基钴催化剂的直接循环使用.     

闪蒸分离的低温液相甲醇合成的研究

为了强化传质和反应操作，同时实现反应产物与浆液的分离，使用CuCr/CH3ONa催化体系,在鼓泡浆液反应器(BCSR)、闪蒸塔(FC)和浆液循环泵组成的反应系统（BCSR FC）中考察了低温甲醇合成的反应性能。初始浆液由铜铬催化剂、甲醇钠溶液、乳化剂OP 10和液相介质二甲苯组成。在BCSR:4.2MPa～4.6MPa,110℃～120℃(反应段)100℃～110℃(扩大段),入口气速0.35cm/s～0.40cm/s;FC:0.25MPa～0.40MPa，80℃～90℃,浆液循环量50L/h下, 100h实验期间,合成气转化率、CO转化率和H2转化率分别从最高的71.0％、79.1％和67.5％降到17.8％、35.0%和12.1%。催化体系失活的主要原因是CH3ONa 和MeF反应生成甲酸钠。液体产物由DME 1.23%、甲醇79.52%、MeF 19.25%组成。甲醇＋MeF的选择性大于98％。以系统中催化剂为基准，液体产物的产率则为0.166g/gcat·h; BCSR中CuCr催化剂的液体产物的产率为0.336g/gcat·h。     

Synthesis of 8‐Oxoberbines and Related Benzolactams by Pd(OAc)2‐Catalyzed Direct Aromatic Carbonylation

A variety of alkoxy‐substituted benzolactams with a berbine or yohimbane skeleton were prepared from 1‐benzyl‐1,2,3,4‐tetrahydroisoquinolines or 1‐benzyl‐1,2,3,4‐tetrahydro‐β‐carbolines by a phosphine‐free Pd(II)‐catalyzed direct aromatic carbonylation in a Pd(OAc)₂‐Cu(OAc)₂ catalytic system. The site selectivity was compared with that of the carbonylation with Pd(OAc)₂ or Pd(OAc)₂·2 PPh₃, respectively.     

Acetalization of alkenes catalyzed by Pd(OAc)2/NPMoV supported on activated carbon under a dioxygen atmosphere

[reaction: see text] The acetalization of terminal alkenes such as ethyl acrylate and acrylonitrile with alcohols under O2 was efficiently achieved by Pd(OAc)2 supported on activated carbon combined with molybdovanadophosphate (NPMoV). For example, ethyl acrylate was subjected to acetalization with EtOH acidified by CH3SO3H under O2 (1 atm) in the presence of [8 wt%Pd(OAc)2/C] and NPMoV to form ethyl 3,3-diethoxypropionate in quantitative yield.     

甲醇直接气相羰基化Mo／C催化剂

为了“优化燃料资源，创建能源化工体系”，开展甲醇下游产品的研究是当今燃料化工的重要内容之一。７０年代初美国Ｍｏｎｓａｎｔｏ开发的Ｒｈ－Ⅰ催化体系使甲醇液相羰基化制醋酸大规模工业化，由于该体系采用昂贵紧缺的金属铑，催化剂需精心回收；并且由于需要大量碘化...