Polyethylene thermal oxidative stabilisation in carbon nanotubes based nanocomposites

Multiwall carbon nanotubes (MWNT)/linear low density polyethylene (LLDPE) nanocomposites were studied in order to understand the stabilisation mechanism for their thermal and oxidative degradation. Thermogravimetry coupled with infrared evolved gas analysis and pyrolysis gas chromatography-mass spectrometry demonstrate that MWNT presence slightly delays thermal volatilisation (15-20 °C) without modification of thermal degradation mechanism. Whereas thermal oxidative degradation in air is delayed by about 100 °C independently from MWNT concentration in the range used here (0.5-3.0 wt.%). The stabilisation is due to formation of a thin protective film of MWNT/carbon char composite generated on the surface of the nanocomposites is shown by SEM and ATR FTIR of degradation residues. The film formation mechanism is discussed.     

Microplate electrochemical DNA detection for phosphinothricin acetyltransferase gene sequence with cadmium sulfide nanoparticles

An electrochemical DNA detection method for the phosphinothricin acetyltransferase (PAT) gene sequence from the transgenetic plants was established by using a microplate hybridization assay with cadmium sulfide (CdS) nanoparticles as oligonucleotides label. The experiment included the following procedures. Firstly target PAT ssDNA sequences were immobilized on the polystyrene microplate by physical adsorption. Then CdS nanoparticle labeled oligonucleotide probes were added into the microplate and the hybridization reaction with target ssDNA sequences took place in the microplate. After washing the microplate for three times, certain amounts of HNO₃ were added into the microplate to dissolve the CdS nanoparticles anchored on the hybrids and a solution containing Cd²⁺ ion was obtained. At last differential pulse anodic stripping voltammetry (DPASV) was used for the sensitive detection of released Cd²⁺ ion. Based on this principle a sensitive electrochemical method for the PAT gene sequences detection was established. The voltammetric currents of Cd²⁺ were in linear range with the target ssDNA concentration from 5.0 × 10^− 13 to 1.0 × 10^− 10 mol/L and the detection limit was estimated to be 8.9 × 10^− 14 mol/L (3σ). The proposed method showed a good promise for the sensitive detection of specific gene sequences with good selectivity for the discrimination of the mismatched sequences.     

A sensitive sensor for anthraquinone anticancer drugs and hsDNA based on CdTe/CdS quantum dots fluorescence reversible control

Based on CdTe/CdS quantum dots (CdTe/CdS QDs) fluorescence (FL) reversible control, a new and sensitive FL sensor for determination of anthraquinone (AQ) anticancer drugs (adriamycin and daunorubicin) and herring sperm DNA (hsDNA) was developed. Under the experimental conditions, FL of CdTe/CdS QDs can be effectively quenched by AQ anticancer drugs due to the binding of AQ anticancer drugs on the surface of CdTe/CdS QDs and photoinduced electron transfer (PET) process from CdTe/CdS QDs to AQ anticancer drugs. Addition of hsDNA afterwards brought the restoration of CdTe/CdS QDs FL intensity, as AQ anticancer drugs peeled off from the surface of CdTe/CdS QDs and embedded into hsDNA double helix structure. The liner ranges and the detection limits of FL quenching methods for two AQ anticancer drugs were 0.33-9 μg mL⁻¹ and 0.09 μg mL⁻¹ for ADM and 0.15-9 μg mL⁻¹ and 0.04 μg mL⁻¹ for DNR, respectively. The restored FL intensity was proportional to concentration of hsDNA in the range of 1.38-28 μg mL⁻¹and the detection limit for hsDNA was 0.41 μg mL⁻¹. It was applied to the determination of AQ anticancer drugs in human serum and urine samples with satisfactory results. The reaction mechanism of CdTe/CdS QDs FL reversible control was studied.     

Ultrasensitive mercury(II) ion detection by europium(III)-doped cadmium sulfide composite nanoparticles

With the biomolecule glutathione (GSH) as a capping ligand, Eu³⁺-doped cadmium sulfide composite nanoparticles were successfully synthesized through a straightforward one-pot process. An efficient fluorescence energy transfer system with CdS nanoparticles as energy donor and Eu³⁺ ions as energy accepter was developed. As a result of specific interaction, the fluorescence intensity of Eu³⁺-doped CdS nanoparticles is obviously reduced in the presence of Hg²⁺. Moreover, the long fluorescent lifetime and large Stoke's shift of europium complex permit sensitive fluorescence detection. Under the optimal conditions, the fluorescence intensity of Eu³⁺ at 614 nm decreased linearly with the concentration of Hg²⁺ ranging from 10 nmol L⁻¹ to 1500 nmol L⁻¹, the limit of detection for Hg²⁺ was 0.25 nmol L⁻¹. In addition to high stability and reproducibility, the composite nanoparticles show a unique selectivity towards Hg²⁺ ion with respect to common coexisting cations. Moreover, the developed method was applied to the detection of trace Hg²⁺ in aqueous solutions. The probable mechanism of reaction between Eu³⁺-doped CdS composite nanoparticles and Hg²⁺ was also discussed.     

Kinetics of the degradation of polystyrene in supercritical acetone

The kinetic analysis of the degradation of polystyrene (PS) in supercritical acetone has been studied using the nonisothermal weight loss technique with heating rates of 3, 5 and 7 °C/min. The weight loss data according to degradation temperature have been analyzed using the integral method based on Arrhenius form to obtain the kinetic parameters such as apparent activation energy and overall reaction order. The kinetic parameters obtained from this work were also compared with those of the thermal degradation of PS in nitrogen atmosphere. From this work, it was found that the activation energies of PS degradation in supercritical acetone were 73.3-200.7 kJ/mol and lower than those of the thermal degradation in nitrogen atmosphere.     

Functionalized cadmium sulfide quantum dots as fluorescence probe for silver ion determination

CdS quantum dots (QDs) modified with l-cysteine has been prepared by one step. They are water-soluble and biocompatible. To improve CdS QDs stability and interaction between silver ion and functionalized CdS QDs in aqueous solution, some amounts of fresh l-cysteine were added to functionalized CdS solution. Based on the characteristic fluorescence enhancement of CdS QDs at 545 nm by silver ions in the presence of some amounts of fresh l-cysteine, simultaneously, a gradual red shift of fluorescence emission bands of CdS QDs from 545 to 558 nm was observed. A simple, rapid, sensitive and specific detection method for silver ion was proposed. Under optimum conditions, the fluorescence intensity of CdS QDs is linearly proportional to silver concentration from 2.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/L with a detection limit of 5.0 × 10⁻⁹ mol/L. In comparison with single organic fluorophores, functionalized CdS quantum dots are brighter, more stable against photobleaching, and don’t suffer from blinking. Furthermore, owing to the fluorescence enhancement effect of CdS QDs by silver ion, the proposed method showed lower detection blank and higher sensitivity. Possible fluorescence enhancement mechanism was also studied.     

Preparation,characterization and application of a novel thermal stable composite nanofiltration membrane

A thermal stable composite membrane was prepared by interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on poly(phthalazinone ether amide) (PPEA) ultrafiltration membrane. The effect of reaction parameters on the performance of composite membranes was studied and optimized. The surface morphologies of the composite membrane and the substrate were observed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The rejection of optimized composite membrane for dyes Congo red (CGR) and Acid chrome blue K (ACBK), the molecular weight (MW) of which is over 400, was over 99.2%, with a flux at about 180 L m⁻² h⁻¹. While the rejection for NaCl was only 18.2% with a flux over 270 L m⁻² h⁻¹, when tested at 1.0 MPa 60 °C. The composite membrane was applied in the desalination-purification experiment of dye ACBK and NaCl mixed solution. The flux of the membrane increased obviously as the operation pressure and/or temperature increased, while the rejection for dye was constant and kept over 99.3%. The purification experiments were accomplished effectively at 1.0 MPa, 80 °C. Only after five rounds of desalination-concentration experiment, about 160 min, the salt mixed in dye solution was fully removed. The initial flux of the eighth cycle was about 254 L m⁻² h⁻¹, which was only 20 L m⁻² h⁻¹ lower than that of the first round. The rejection of the membrane was constant and kept over 99.3% through out the eight cycles of purification experiment.     

Preparation and characterization of three-dimensionally ordered macroporous yttria-stabilized zirconia by aqueous organic gel route

Three-dimensionally ordered macroporous (3-DOM) yttria-stabilized zirconia (YSZ) was prepared by aqueous organic gel method through the interstitial spaces between polystyrene spheres assembled on glass substrates. The morphologies and pore size of the porous YSZ were characterized by scanning electron microscope (SEM) and nitrogen adsorption. The thermal behavior, the phase and chemical composition of PS/YSZ composite were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The results show that porous YSZ has been formed with the pores arranged in an ordered close-packed three-dimensional structure. Ni/YSZ cermet was also prepared by immersing the 3-DOM YSZ into the solution of nickel nitrate and urea. The electrical conductivity of Ni/YSZ was about 400 S cm⁻¹ between 600 and 800 °C.     

Optimized synthesis and characterization of polystyrene graft copolymers and preliminary assessment of their biodegradability and application in water pollution alleviation technologies

With more and more plastics being employed in human lives and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. Keeping in view the environmental pollution caused by the waste polystyrene and to make the waste polystyrene technologically important, we have modified/functionalized the polystyrene with natural polymers and hydrophilic monomer through graft copolymerization. The present paper discusses the optimum conditions for the synthesis of graft copolymers and characterization of these polymers with SEMs and FTIR and thereafter biodegradation studies of these polymers by soil burial method. The present paper also discusses the effect of crosslinker concentration on the swelling and metal ion sorption (As⁺⁵ uptake) through the functionalized polystyrene, with the intention to make use of these polymeric networks in water pollution alleviation technology. It has been observed that percent As⁵⁺ uptake decreases from 80% to 60% as the crosslinker concentration increases from 0.032 mM to 0.162 mM in the polymeric networks. It has also been observed from the degradation studies that the grafting of starch onto polystyrene has induced 37% degradation after 160 days soil burial treatment and no degradation has been observed in case of grafting of acrylic acid onto polystyrene.     

CdS and Cd carboxylate nanoclusters dispersed in polymer matrix produced by a freeze drying method

Cadmium sulfide (CdS) nanoclusters were prepared by a freeze drying method from two types of cadmium carboxylates. One was cadmium methacrylates that were part of poly(methyl methacrylate) (PMMA) ionomer. The other was cadmium acetates that were dispersed in PMMA. X-ray diffraction was mainly used to study the formation and the size of nanoclusters. The size of CdS made from the ionomer was 0.9 nm, whereas that from the composite of cadmium acetate and PMMA was 2 nm. This was consistent with the size difference of the precursors of CdS: i.e., Cd carboxylate nanoclusters (ionic aggregates) were smaller in the ionomer than in the PMMA mixture, because ionic groups in the ionomer were constrained due to their connectivity to backbone chains and thus forming smaller ionic aggregates. Once stabilized, however, CdS nanocluster sizes were unchanged despite thermal treatments at up to 220 °C for 24 h for both systems. Structural transformations from a freeze dried cadmium carboxylate powder, to a CdS-containing powder, and to a heat-treated CdS-containing sample are speculated for both types of systems.     

Thermal stability of silver sulfathiazole-epoxy resin network

The aim of this study is to evaluate the thermal stability and thermal degradation behavior of an epoxy network based on bisphenol A modified with silver sulfathiazole and crosslinked with ethylenediamine. The sample was studied by thermogravimetric analysis coupled with differential scanning calorimetry over a range of temperature between 30 and 600 °C in N₂ atmosphere and using heating rates of 5, 10, 15 and 20 °C min⁻¹. The kinetic parameters of thermal degradation process were calculated. Fourier transforms infrared spectroscopy and mass spectroscopy coupled to thermogravimetry was used to identify the volatile products resulting from the degradation of the network. The study showed that the sample is stable up to temperatures exceeding 290 °C. The major degradation volatile products identified were: ammonia, water, carbon dioxide and compounds with aromatic structure such as bisphenol A and its degradation products.     

Electrospun polystyrene/graphene nanofiber film as a novel adsorbent of thin film microextraction for extraction of aldehydes in human exhaled breath condensates

In the current study, we introduced a novel polystyrene/graphene (PS/G) composite nanofiber film for thin film microextraction (TFME) for the first time. The PS/G nanofiber film was fabricated on the surface of filter paper by a facile electrospinning method. The morphology and extraction performance of the resultant composite film were investigated systematically. The PS/G nanofiber film exhibited porous fibrous structure, large surface area and strong hydrophobicity. A new thin film microextraction-high performance liquid chromatography (TFME-HPLC) method was developed for the determination of six aldehydes in human exhaled breath condensates. The method showed high enrichment efficiency and fast analysis speed. Under the optimal conditions, the linear ranges of the analytes were in the range of 0.02–30 μmol L⁻¹ with correlation coefficients above 0.9938, and the recoveries were between 79.8% and 105.6% with the relative standard deviation values lower than 16.3% (n = 5). The limits of quantification of six aldehydes ranged from 13.8 to 64.6 nmol L⁻¹. The established method was successfully applied for the quantification of aldehyde metabolites in exhaled breath condensates of lung cancer patients and healthy people. Taken together, the TFME-HPLC method provides a simple, rapid, sensitive, cost-effective, non-invasion approach for the analysis of linear aliphatic aldehydes in human exhaled breath condensates.     

Synthesis and thermal behaviour of polyamide 6/bentonite/ammonium polyphosphate composites

In order to achieve acceptable levels of flame retardancy of polymers, phosphorus-based flame retardant (FR) additives at about 20-30% w/w are required which is too high for conventional synthetic fibres. To know whether more finely sized particles of conventional FRs with or without nanoclay are more effective at the same concentration, composites of PA6 with bentonite and ammonium polyphosphate (APP) have been prepared by melt processing in a twin-screw extruder. XRD peaks and TEM images of PA6/Org-bentonite composite show partially ordered intercalation and ordered exfoliation. Thermal analysis in He shows that thermal stability of PA6 nanocomposite has increased by 18 °C compared with pure PA6 during degradation after 425 °C but it has decreased by 100 °C on inclusion of APP in PA6/nanoclay composites. The char yield is increased by 20% in PA6/bentonite/APP composites. No effect on thermal stability or char yield is observed by reducing the particle size of APP.     

Thermal decomposition of native cellulose: Influence on crystallite size

The thermal degradation behavior of crystalline cellulose has been investigated using thermogravimetry, differential thermal analysis, and derivative thermogravimetry in a nitrogen atmosphere. Three cellulose samples, Halocynthia, cotton, and commercial microcrystalline cellulose Funacel, were used in this study to analyze the influence on crystallite size. They all belongs to cellulose I_β type and those crystallite sizes calculated from the X-ray diffractometry profiles by Scherrer equation were very different in the order Halocynthia > cotton > Funacel. The thermal decomposition of cellulose shifted to higher temperatures with increasing crystallite size. However, activation energies for the thermal degradation were the almost the same among the samples: 159-166 kJ mol⁻¹. These results indicated that the crystal structure does not affect the activation energy of the thermal degradation but the crystallite size affects the thermal degradation temperature.     

Morphology, thermal stability and visco-elastic properties of polystyrene-poly(vinyl chloride) blends

The morphology, thermal and mechanical properties of polystyrene (PS) blends with 2.5-20 wt% of poly(vinyl chloride) (PVC) have been studied. The measurement of the glass transition temperature (T_g) from the maxima of tan δ data using dynamic mechanical thermal analysis showed that the blends were incompatible and homogenously distributed only within a limited range of PVC contents in PS. The value of the storage modulus was found to increase initially but then decreased with further addition of PVC in the matrix. Distribution of the phases in the virgin and degraded blends was also studied through scanning electron microscopy. The thermogravimetric studies on these blends were carried out under inert atmosphere from ambient to 800 °C at different heating rates varying from 2.5 to 20 °C/min. The thermal decomposition temperatures of blends were found higher than that of pure PS which indicated the stabilizing effects of PVC on PS. The effect varies with the heating rates and the composition of the blends and the phenomenon has been explained due to changing morphology of the blends with composition and the degradation time which affect the interfacial interaction between the degrading products from the polymer components. The kinetic parameters of the degradation process calculated from a method described by Ozawa have been reported for these blends.     

Highly permeable mesoporous silica membranes synthesized by vapor infiltration of tetraethoxysilane into non-ionic alkyl poly(oxyethylene) surfactant films

Mesoporous silica membranes were prepared on porous alumina substrates by a vapor infiltration of tetraethoxysilane (TEOS) into a non-ionic poly(oxyethylene) (Brij56) surfactant film. Periodic mesostructured silica membranes were formed on both α- and γ-alumina substrates pre-treated with polystyrene. The polystyrene polymer plugged the pores of the alumina substrates and inhibited the deposition of silica in the alumina pores, resulting in the formation of a very thin silica membrane without a silica/alumina composite layer at the interface between mesoporous silica and the alumina substrates. The calcined mesoporous silica membrane showed very high nitrogen permeance (>10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹). The single gas permeation was governed by the Knudsen diffusion mechanism. The durability of the mesoporous silica membrane against moisture in air was improved by a silylation with trimethylethoxysiliane.     

Preparation and properties of Nafion/hollow silica spheres composite membranes

In present work, hollow silica spheres (HSS)/Nafion^® composite membranes were prepared by solution casting. The thermal properties, water retention, swelling behavior and proton conductivity of the composite membranes were explored. It was found that HSS dispersed well at micrometer scale in the obtained composite membranes by SEM and TEM observation. Thermal properties of composite membranes were improved than that of recast Nafion^® membrane. Compared with the recast Nafion^® membrane, the composite membranes showed higher water uptake and lower swelling degree at the temperature range from 40 to 100 °C. At the same HSS loading, the smaller the diameter of HSS in composite membranes, the more the water uptake, however, the swelling degree of composite membranes was increased. The proton conductivity of the composite membrane with 3–5 wt.% HSS (120 and 250 nm) increased distinctively at above 60 °C, reached the optimal value at 100 °C, and decreased slowly when the temperature exceeded 100 °C.     

Synthesis and photocatalytic activity of co-doped mesoporous TiO2 on Brij98/CTAB composite surfactant template

Using composite surfactant templates, polyoxyethylene (20) oleyl ether (Brij98) and cetyl trimethyl ammonium bromide (CTAB), as structure-directing agents, N and La co-doped mesoporous TiO₂ complex photocatalysts were synthesized successfully. The micromorphology of co-doped mesoporous TiO₂ samples was characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infrared spectroscopy (FT-IR), energy-dispersive X-ray spectrometer (EDS) and N₂ adsorption-desorption measurements. The results indicated that the complex photocatalyst prepared with a molar ratio of Brij98:CTAB=1:1 showed a uniform pore size of ca. 7 nm and a high specific surface area (S_BET) of 279.0 m² g⁻¹, and exhibited the highest photocatalytic activity for degradation of papermaking wastewater under ultra-violet light irradiation. The chemical oxygen demand (CODc_r) percent degradation was about 73% in 12 h and chroma percent degradation was 100% in 8 h.     

Preparation of silica-PS composite particles and their application in PET

To investigate how the superfine particles disperse in the polymers, the paper presented the preparation of monodisperse silica particles by Stöber method, and then grafted by γ-methacrylic propyl trimethoxysilane (MPS) as a coupling agent. Using these modified particles, the more stable silica-PS superfine composite particles with higher monodispersity than these of previous reports are prepared and reported through dispersion polymerization (DP) method, whose morphology is investigated with transmission electron microscope (TEM). Their high stability is provided from the bonding of CC groups of MPS to the silanol groups on the surface of silica particles from FTIR.Using this DP process, the influence of different size grafted silica particles on the morphology, polystyrene (PS) encapsulation behavior and the distribution in these composite particles have been investigated. When the grafted silica size is in nanoscale or less than 54 nm, the spherical shape of neither silica particles nor their composite particles is regular, but they can homogeneously disperse in polystyrene. As the size (d_n) of grafted silica particles increase to submicrometer (or 100 nm < d_n < 1000 nm), their coefficient variance of size distribution (C_v) ranges from only 9.0% to 1.5%. These obtained particles are completely encapsulated by PS with more regular shape, and have their C_v below 7%. When the size of silica particles reaches 380 nm, their C_v obviously reduces to 2.5%, and specially, the number of grafted silica particles approaches to one in each of the composite particles. But, when the silica size reaches 602 nm, PS can hardly encapsulate grafted silica particles and free silica particles appear in reactive system.Furthermore, using the silica particles of 380 nm, a series of core-shell structured superfine composite particles of 640-1100 nm with C_v lower than 11% are obtained. Under the set conditions, the preparing factors on these composite particles using 380 nm grafted silica particles is discussed, and the best reaction condition for the well-dispersed and regular periphery silica-PS composite particles is optimized as, the additions amounts of PVP, styrene, AIBN, grafted SiO₂ and H₂O are 0.23 mmol L⁻¹, 0.60 mol L⁻¹, 6.10 mmol L⁻¹, 0.10 mol L⁻¹ and 5.50 mL, respectively. Under this case, the composite particles can be prepared with C_v below 8%.At last, these composite particles are mixed with poly(ethylene terephthalate) (PET) to investigate their nucleation effect. Results show that all different size particles can promote PET’s crystallization and enhance the crystallization rate, and PET’s crystallization temperature (T_mc) is obviously enhanced from 193 to 205 °C through differential scanning calorimetry (DSC). It is strongly suggested that different silica size level all play nucleation role in PET, and thus explain the nucleation effect of multiscale inorganic particles.