聚氨酯互穿聚合物网络阻尼性能研究进展

介绍了聚氨酯互穿聚合物网络（ＰＵ ＩＰＮ）作为阻尼材料的研究进展,分别讨论了聚氨酯（ＰＵ）／环氧树脂（ＥＰ）ＩＰＮ和ＰＵ／乙烯基聚合物ＩＰＮ的阻尼性,以及影响阻尼性能的因素,并比较了不同类型的ＰＵ ＩＰＮ的优缺点及新的可能的探讨方向。     

不饱和聚酯／聚氨酯复合体系的研究

以端羟基不饱和聚酯（ＨＵＰ）与聚氨酯（ＰＵ）浇注型复合网络聚合物（ＣＰＮｓ）为基材，考察了化学动力学及相分离对ＣＰＮ聚合物物理机械性能的影响．数据揭示了不饱和聚酯／聚附聚氨酯（ＨＵＰ／ＰＵ－ｅｓ）ＣＰＮ，当ｒ＝ＮＣＯ／ＯＨ＝０．４时，它的物理力学性能优于不饱和聚酯／聚醚聚氨酯（ＨＵＰ／ＰＵ－ｅｔ）ＣＰＮ或ＨＵＰ／ＰＡＰＩＣＰＮ组成物．最佳ＣＰＮ可通过调整聚氨酯中软段和硬段组分及网络组成而设计与制备．     

交联密度对聚氨酯／聚苯乙烯互穿聚合物网络动态力学性能的影响

采用同步法合成了聚氨酯／聚苯乙烯（ＰＵ／ＰＳ）互穿聚合物网络（ＩＰＮ）．通过改变ＮＣＯ／ＯＨ比、三元醇／二元醇（３ＯＨ／２ＯＨ）比、异氰酸酯类型、多元醇分子量、二乙烯基苯含量及丙烯酸β－羟乙酯的含量，研究了单网及网间交联密度对ＰＵ／ＰＳＩＰＮ动态力学性能影响的规律．结果表明：对相容性差的ＰＵ／ＰＳＩＰＮ体系，采用增加交联密度、加快网络固化速度导致“强迫互容”，能提高两网的互穿与缠结，增进组份的互容．但单网固化速度过快相容性反而下降．     

聚环氧氯丙烷聚氨酯／聚甲基丙烯酸甲酯互穿网络聚合物的相容性与力学性能

用同步法合成了聚环氧氯丙烷聚氨酯／聚甲基丙烯酸甲酯互穿网络聚合物［ＰＵ（ＰＥＣＨ）／ＰＭＭＡＩＰＮ］，调节ＩＰＮ中两组分组成比制备出由完全弹性体、增强弹性体、增韧塑料到脆性塑料多种高聚物合金材料．用ＤＳＣ、动态力学谱、ＴＥＭ对ＩＰＮ的研究结果表明，ＰＵ（ＰＥＣＨ）／ＰＭＭＡＩＰＮ的两组分是完全相容的；同时对各种组成比的ＩＰＮ材料进行力学性能测试，用相容性ＩＰＮ中互穿、缠结结构解释其力学行为，并用ＳＥＭ对断面形貌进行了观察解释．     

聚氨酯／聚（苯乙烯－甲基丙烯酸甲酯－甲基丙烯酸）互穿聚合物网络的研究

研究了（蓖麻油－聚乙二醇）聚氨酯／聚（苯乙烯－甲基丙烯酸甲酯－甲基丙烯酸）（ＰＵ／Ｐ（Ｓｔ－ＭＭＡ－ＭＡＡ））互穿聚合物网络（ＩＰＮ）．动态力学性能及透射电镜结果均表明该体系相分离较严重；ＩＰＮ具有两个玻璃化转变温度，它们有不同程度的内移，形成一定程度分子水平的混合，而ＩＰＮ（５０／５０）其分子混合水平较大，互穿缠结程度较高。形成ＩＰＮ后，其力学性能得以改善。透射电镜结果表明，聚氨酯网的交联密度直接影响ＩＰＮ的相区尺寸。形成ＩＰＮ后热稳定性提高，易于降解断链的Ｓｔ－ＭＭＡ－ＭＡＡ单体起到了自由基消除剂的作用。     

聚环氧氯丙烷聚氨酯／聚甲基丙烯酸甲酯IPN力学性能

利用改变组成比、聚氨酯ＰＵ软段的分子量、Ｒ值、异氰酸酯和两网络各自交联剂含量合成出５个系列的聚环氧丙烷聚氨酯／聚甲基丙烯酸甲酯互穿聚合物网络，利用ＩＰＮ中交联、互穿、缠结程度的不同，并结合ＤＣＳ、ＴＥＭ、动态粘弹谱讨论了ＩＰＮ力学性能。     

聚氨酯型互穿网络聚合物的研究

以甲苯二异氰酸酯和蓖麻油反应，合成了一系列室温固化的蓖麻油型聚氨酯。分别研究了蓖麻油聚氨酯（ＣＯＰＵ）／聚苯乙烯（ＰＳｔ）ＩＰＮｓ、ＣＯＰＵ／聚丙烯腈（ＰＡＮ）ＩＰＮｓ的结构和性能。结果表明：ＣＯＰＵ／ＰＡＮ的力学性能较ＣＯＰＵ／ＰＳｔ的力学性能为好。为进一步改善聚合物之间的相容性，在聚苯乙烯网络中引入极性较大的丙烯腈制备了ＣＯＰＵ／Ｐ（Ｓｔ－ＣＯ－ＡＮ）ＩＰＮｓ，并对它的力学性能、热分析、动态力学性能、热稳定性等作了系统的研究。结果表明：当聚氨酯浓度为６０％时，改变Ｓｔ、ＡＮ的比例，随ＡＮ含量的增加，体系的微相分离程度降低。改变ＣＯＰＵ／Ｐ（Ｓｔ－ＣＯ－ＡＮ）的比例，ｔａｎδ－Ｔ曲线上均呈现一个较宽的玻璃化转变温度；热重分析表明，其初始分解温度可达２４４℃。     

交联密度对聚氨酯／聚苯乙烯互穿聚合物网络动态力学性能…

采用同步法合聚氨酯／聚苯乙烯互穿聚合物网络，通过改变ＮＣＯ／ＯＨ比、三元醇／二元醇比、异氰酸酯类型、多元醇分子量、二乙烯苛苯含量及丙烯酸β－羟乙酸的含量，研究了单网及网间交联密度对ＰＵ／ＰＳＩＰＮ动态力学性能影响的规律。结果表明：对相容性差的ＰＵ／ＰＳＩＮＰ体系，要用增加交联密度，加快网络固化速度导致“强迫互容”、能提高两网的互穿与缠结，增进组份的互容，但单网固化速度过快相容性反而下降。     

丁腈橡胶对聚甲醛树脂的增韧机理研究

研究了丁腈橡胶（ＮＢＲ） 对聚甲醛（ＰＯＭ） 树脂的增韧机理,并比较了ＰＯＭ／ＮＢＲ 体系和ＰＯＭ／ 热塑性聚氨酯（ＴＰＵ） 体系的异同．结果表明,高丙烯腈（ＡＮ） 含量的ＮＢＲ 有着和ＴＰＵ 相近的溶度积参数,且其分子上的氰（ＣＮ） 基或双键对ＰＯＭ 分解时产生的甲醛及大分子自由基的捕捉作用,有利于改善ＮＢＲ 和ＰＯＭ 之间相容性,因而可和ＰＯＭ 树脂形成良好的合金体系;当ＮＢＲ 含量达４０ｗｔ％ 时,ＰＯＭ／ＮＢＲ 体系出现脆 韧转变,从逾渗机制、剪切带机制、类互穿网络（ＩＰＮ） 作用机制等角度进行考察的结果证明,ＮＢＲ 对ＰＯＭ 树脂的增韧行为以及ＰＯＭ／ＮＢＲ 共混合金体系的脆 韧转变规律与ＰＯＭ／ＴＰＵ 体系相一致．     

四元胶乳互穿聚合物网络的组成对其性能的影响

用分步乳液聚合法合成了具有核壳结构的胶乳互穿聚合物网络ＬＩＰＮ（ＰＭＭＡ－ＰＳ）／（Ｐｎ－ＢＡ－ＰＡＡ）；讨论了ＬＩＰＮ组成对乳液与膜性能的影响，提出了四元ＬＩＰＮ核壳结构的基本轮廓，探讨了软硬单体最佳配比及丙烯酸单体用量。     

Flame Retardancy and Kinetic Behavior of Ammonium Polyphosphate–Treated Unsaturated Polyester/Phenolic Interpenetrating Polymer Network

In this study, the flammability and kinetic behavior of flame retardant unsaturated polyester (UP)/phenolic resin were investigated. The flame retardant ammonium polyphosphate (APP) was used in this research to improve the flame resistance of a UP/phenolic resin interpenetrating polymer network (IPN). The flame resistance of UP improved from none to V-0 classification by adding phenolic resin and APP. Kinetic behavior study of UP, UP/phenolic, and APP-filled UP/phenolic IPN was carried out by the Borchardt and Daniels method. The results indicated that modification of flammable UP resin markedly improved the total heat release volume of UP and the flame retardancy of the IPN network structure was also enhanced.     

A study of the combustion and fire-retardance behaviour of unsaturated polyester/phenolic resin blends

The thermal degradation and combustion behaviour of an interpenetrating network (IPN) structure of unsaturated polyester UP resin and a resole type of phenolic resin was studied. Thermal gravimetric analysis (TGA) was used to monitor the degree of thermal decomposition for the UP/phenol IPN structure and the change of the oxygen index (OI) was used to describe the variation of the combustion behaviour. The smoke density was measured via a non-flaming process to detect the amount of smoke generated during the combustion. A homemade cone calorimetric dynamic flammability evaluation system was assembled to analyse the gas evolved and to measure the heat release rate (HRR) during the combustion. Under simulated conditions of a burning field at the temperature of 757°C, the variation of the concentration of carbon monoxide (CO) and the HRR of the UP/phenol IPN structure were studied. The results show that modification of the essentially flammable UP resin by the phenol structure to form an IPN system cannot only remarkably improve the heat resistance but also help to suppress the smoke, toxic gas and heat release during the combustion.     

Effect of Sodium Alginate on the Properties of Thermosensitive Hydrogels

Sodium alginate (SA ) was combined with poly(N ‐isopropylacrylamide) (PNIPAAm ) to prepare thermosensitive hydrogels through semi‐interpenetrating polymer network (semi‐IPN ) and fully interpenetrating polymer network (full‐IPN ). The thermosensitive, swelling, mechanical, and thermal properties of pure PNIPAAm , SA /PNIPAAm semi‐IPN , and Ca‐alginate/PNIPAAm full‐IPN hydrogels were investigated. The formation of semi‐IPN and full‐IPN significantly improved the hydrogels’ swelling capability and mechanical properties without altering their thermosensitivity. 5‐Fluorouracil (5‐Fu) was selected as a model drug to study the release behaviors of the hydrogels. It was found that in vitro controlled drug release from semi‐IPN hydrogels showed an initial release burst, followed by a slower and sustained release, before reaching equilibrium. Full‐IPN hydrogels showed slow and sustained release during the whole process. Temperature and pH were found to affect the rate of drug release. Ca‐alginate/PNIPAAm full‐IPN hydrogels have potential application as drug delivery matrices in controlled drug release.     

Intelligent biomembrane obtained by irradiation techniques

An intelligent biomembrane for environment-responsive feedback releases has been developed using radiation techniques. Various fine-porous base membranes (polyester, polycarbonate, silicon) were prepared by hole fabrication techniques with excimer-laser, ion-beam etching and photo-lithography etching. Then, various monomeric mixture of stimuli-sensitive hydrogels with or without immobilized enzymes were coated and polymerized on the porous membrane by UV, γ-ray or electron beam. The product showed the intelligent feedback release functions of model substance (methylene blue) in response to the on–off switching of signals such as pH changes and introduction of electric field. The responsiveness was remarkably improved by radiation induced IPN (interpenetrating polymer network) formation. Intelligent release controlled by a computer program was also studied and proved.     

A simple route to interpenetrating network hydrogel with high mechanical strength

A simple two-step method was introduced to improve the hydrogel mechanical strength by forming an interpenetrating network (IPN). For this purpose, we synthesized polyacrylate/polyacrylate (PAC/PAC), polyacrylate/polyacrylamide (PAC/PAM), polyacrylamide/polyacrylamide (PAM/PAM) and polyacrylamide/poly(vinyl alcohol) (PAM/PVA) IPN hydrogels. The PAC/PAC IPN and PAC/PAM IPN hydrogels showed compressive strength of 70 and 160 kPa, respectively. For the PAM/PAM IPN and PAM/PVA IPN hydrogels, they exhibited excellent tensile strength of 1.2 and 2.8 MPa, and elongations at break of 1750% and 3300%, respectively. A strain relaxation was also observed in the case of PAM series IPN hydrogels. From FTIR, TGA and SEM measurements, we confirmed that physical entanglement, hydrogen bonds and chemical crosslinking played major roles in improving hydrogel strength and toughening. The two-step technique contributes to the understanding of ideal networks, provides a universal strategy for designing high mechanical strength hydrogels, and opening up the biomedical application of hydrogels.     

疏水/亲水性聚二乙烯基苯/聚丙烯酸大孔互穿聚合物网络树脂对苯胺的吸附性能

采用分步悬浮聚合法制备了聚二乙烯基苯/聚丙烯酸甲酯（PDVB/PMA）大孔互穿聚合物网络,将其中的聚丙烯酸甲酯转化为聚丙烯酸,得到具有疏水/亲水性能的聚二乙烯基苯/聚丙烯酸（PDVB/PAA）大孔互穿聚合物网络（IPN）,研究了这类疏水/亲水大孔PDVB/PAA IPN对苯胺的吸附热力学和吸附动力学,测定了该树脂的孔结构、含水量、弱酸交换量和溶胀性能;测定了该树脂对苯胺在不同温度下的吸附等温线,利用热力学函数关系计算了吸附焓、自由能和熵。 红外光谱显示,成功合成了疏水/亲水PDVB/PAA IPN,与PDVB、PDVB/PMA IPN树脂相比,其BET表面积以及孔容均减小,含水量为62.73％,弱酸交换量为1.91 mmol/g;对苯胺的吸附为放热、自发的过程;溶胀实验、静态解吸实验表明,PDVB/PAA IPN树脂中疏水性的PDVB网具有疏水作用吸附能力,亲水性的PAA网具有氢键作用吸附能力。 对苯胺的吸附在90 min时即可达到吸附平衡,树脂吸附苯胺符合一级速率方程,吸附速率主要受颗粒内扩散的控制,同时还受液膜扩散的影响,吸附动力学可采用HSDM模型描述。     

AN EPOXY/(METHYL METHACRYLATE)INTERPENETRATING POLYMER NETWORK FOR NONLINEAR OPTICS*

An interpenetrating polymer networks (IPN) consisting of an epoxy-based polymer network and apolymethyl methacrylate network were synthesized and characterized. The IPN showed only one T_g, andhence a homogeneous-phase morphology was suggested. The second-order nonlinear optical coefficient (d_(33))of the IPN was measured to be 1.72×10~(-7) esu. The study of NLO temporal stability at room temperature andelevated temperature (100℃) indicated that the IPN exhibits a high stability in the dipole orientation due tothe permanent entanglements of two component networks in the IPN system. Long-term stability of secondharmonic coefficients was observed at room temperature for more than 1000 h.     

Synthesis and Properties of IPN Hydrogels Based on Konjac Glucomannan and Poly（acrylic acid）

As a random copolymer of β-(1,4) linked D-mannose and D-glucose, konjac gluco- mannan (KGM) is a naturally occurring water-soluble polysaccharide, and has been paid attention in the field of drug controlled release carriers potentially used in colon1,2. …     

聚丙烯酰胺/聚异丙基丙烯酰胺互穿网络水凝胶的制备与性能

采用分步法用电子加速器辐射合成了聚丙烯酰胺(PAAm)/聚异丙基丙烯酰胺(PNIPAAm)互穿网络水凝胶,并考察了温度、pH值、离子强度对其溶胀性能的影响.研究表明:互穿水凝胶具有温度敏感性,且其体积相变与互穿网络中PAAm和PNIPAAm含量有关,随着网络中PAAm含量的增加水凝胶的体积相变趋于平缓,可以通过改变PAAm和PNIPAAm的组成比来控制水凝胶的体积相变行为.此外,互穿水凝胶还具有pH敏感性和一定的抗盐性.     

Radiation preparation and thermo-response swelling of interpenetrating polymer network hydrogel composed of PNIPAAm and PMMA

Interpenetrating polymer network (IPN) hydrogel composed of hydrophilic poly(N-isopropylacrylamide) (PNIPAAm) and hydrophobic poly(methyl methacrylate) (PMMA) were synthesized by sequential IPN method using γ-rays from ⁶⁰Co source. Compared with pure PNIPAAm hydrogel, PNIPAAm/ PMMA IPN hydrogel not only behaved with obvious temperature sensitivity, but also had higher mechanical strength. The shrinking rate of the prepared IPN hydogel was slower than that of PNIPAAm hydrogel and the relative shrinkage was higher than that of PNIPAAm hydrogel. The IPN hydrogel with less PMMA was not stable while with more PMMA it was quite stable. In addition, the release of Methylene Blue (MB) from the IPN hydrogel was slower than that from PNIPAAm hydrogel as well.