Aptamer-quantum dots and teicoplanin-gold nanoparticles constructed FRET sensor for sensitive detection of Staphylococcus aureus

The detection of bacterial pathogen such as Staphylococcus aureus(S.aureus) is essential for the regulation of food hygiene and disease diagnosis.Herein,we developed a simple one-step fluorescence resonance energy transfer(FRET)-based sensor for specific and sensitive detection of S.aureus in food and serum samples,in which aptamer-modified quantum dots(aptamer-QDs) was employed as the energy donor and antibiotic of teicoplanin functionalized-gold nanoparticles(Teico-AuNPs) was chosen as the energy acceptor.Within 1 h,the FRET-based sensor showed a linear range of from 10 cfu/mL to 5 × 10~8 cfu/mL,with the low limit of detection(LOD,2 cfu/mL) for S.aureus in buffer.When further applied to assay S.aureus in real samples,the FRET-based sensor showed good recoveries ranging from 84.5% to 110.0%,with relative standard derivations(RSDs) of 0.01%-0.44% and a LOD of 100 cfu/mL in milk,orange juice and human serum.     

铂纳米颗粒修饰电极对大肠杆菌的电化学快速检测

本文采用了电化学沉积法制备了铂纳米颗粒化学修饰电极（PtNP/GCE）,并将它应用于大肠杆菌的检测。原理是基于检测大肠杆菌溶液中酶与底物的反应产物,对氨基酚,实现了对大肠杆菌的快速检测。采用了铂纳米颗粒修饰电极,并对检测系统进行优化,提高大肠杆菌的检测灵敏度。大肠杆菌浓度在50—1.0×10⁵cfu/ml与响应电流成良好的线性关系,最低检测限为20 cfu/ml,检测时间在4个小时以内。与传统方法相比,该电化学方法能很好地满足食品安全、环境监控和临床医学等领域中快速检测的要求。     

Electrochemical investigation of platinum-coated gold nanoporous film and its application for Escherichia coli rapid measurement

Pt-nanoparticle-coated gold nanoporous film (PGNF) was synthesized via a simple nonpolluting approach and PGNF modified electrode was also constructed successfully for the rapid measurement of Escherichia coli (E. coli) in this work. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) images showed that the resulting PGNF electrode had highly ordered arrangement and large surface area. Furthermore, the electrochemical characteristics of the PGNF electrode were investigated by cyclic voltammetry (CV) and amperometric i-t curve. The PGNF electrode showed excellent electrocatalytic activity to E. coli and the current responses were in good linear from 2 × 10¹ cfu/ml to 1 × 10⁶ cfu/ml with the detection limit of 10 cfu/ml (S/N = 3) without pretreatment. The high sensitivity, wider linear range and good reproducibility make this PGNF a promising candidate for portable amperometric E. coli sensor.     

Disposable Immunosensor for Escherichia Coli O157:H7 Based on a Multi-Walled Carbon Nanotube-Sodium Alginate Nanocomposite Film Modified Screen-Printed Carbon Electrode

A disposable immunosensor for the detection of Escherichia coli O157:H7 based on a multiwalled carbon nanotube–sodium alginate nanocomposite film was constructed. The nanocomposite was placed on a screen-printed carbon electrode, and horseradish peroxidase-labeled antibodies were immobilized to E. coli O157:H7 on the modified electrode to construct the immunosensor. The modification procedure was characterized by atomic force microscopy and cyclic voltammetry. Under optimal conditions, the proposed immunosensor exhibited good electrochemical sensitivity to E. coli O157:H7 in a concentration range of 10³–10¹⁰ cfu/mL, with a relatively low detection limit of 2.94 × 10² cfu/mL (S/N = 3). This immunosensor exhibited satisfactory specificity, reproducibility, stability, and accuracy, making it a potential alternative tool for early assessment of E. coli O157:H7.     

Fabrication of an Electrochemical E. coli Biosensor in Biowells Using Bimetallic Nanoparticle‐Labelled Antibodies

An electrochemical biosensor was developed for the determination of Escherichia coli (E. coli) in water. For this purpose, silver‐gold core‐shell (Ag@Au) bioconjugates and anti‐E. coli modified PS‐microwells were designed in a sandwich‐type format in order to obtain higher sensitivity and selectivity. Ag@Au bimetallic nanoparticles were synthesized by co‐reduction method. The core‐shell formation was analyzed by using UV‐Vis spectroscopy and transmission electron microscopy. Biotin labeled anti‐E. coli antibodies were coupled with Ag@Au nanoparticles to form bioconjugates. The electrochemical immunosensor was prepared by immobilizing anti‐E. coli on polystyrene (PS)‐microwells via chemical bonding. These modified microwells were identified with X‐ray photoelectron spectroscopy and surface enhanced Raman spectroscopy. E. coli was sandwiched between Ag@Au bioconjugates and anti‐E. coli on PS‐microwells at different concentrations. The relationship between the E. coli concentration and stripping current of gold ions (Au³⁺) were investigated by square wave anodic stripping voltammetry at pencil graphite electrode. The proposed method can provide some advantages such as lower detection limit and shorter detection time. The electrochemical response for the immunosensor was linear with the concentration of the E. coli in the range of 10¹ and 10⁵ cfu/mL with a limit of detection 3 cfu/mL. The procedure maintains good sensitivity and repeatability and also offers utility in the fields of environmental monitoring and clinical diagnosis.     

Detection of bacteria by surface-enhanced Raman spectroscopy

The detection and identification of dilute bacterial samples by surface-enhanced Raman spectroscopy has been explored by mixing aqueous suspensions of bacteria with a suspension of nanocolloidal silver particles. An estimate of the detection limit of E. coli was obtained by varying the concentration of bacteria. By correcting the Raman spectra for the broad librational OH band of water, reproducible spectra were obtained for E. coli concentrations as low as approximately 10³ cfu/mL. To aid in the assignment of Raman bands, spectra for E. coli in D₂O are also reported. Figure Light scattering apparatus used to detect bacteria     

Fabrication of Tyrosinase Biosensor Based on Multiwalled Carbon Nanotubes‐Chitosan Composite and Its Application to Rapid Determination of Coliforms

A tyrosinase (Tyr) biosensor was fabricated by immobilizing Tyr on the surface of multiwalled carbon nanotubes (MWNTs)‐chitosan (Chit) composite modified glassy carbon electrode (GCE). The MWNTs‐Chit composite film provided a biocompatible platform for the Tyr to retain the bioactivity and the MWNTs possessed excellent inherent conductivity to enhance the electron transfer rate. The Tyr/MWNTs‐Chit/GCE biosensor showed high sensitivity (412 mA/M), broad linear response (1.0×10^?8–2.8×10^?5 M), low detection limit (5.0 nM) and good stability (remained 93% after 10 days) for determination of phenol. The biosensor was further applied to rapid detection of the coliforms, represented by Escherichia coli (E. coli) in this work. The current responses were proportional to the quantity of coliforms in the range of 10⁴–10⁶ cfu/mL. After 5.0 h of incubation, E. coli could be detected as low as 10 cfu/mL.     

A Sensitive Nanoporous Gold-Based Electrochemical DNA Biosensor for Escherichia coli Detection

A sensitive electrochemical DNA biosensor based on a mixed monolayer structure self-assembled at nanoporous gold (NPG) electrode surface was prepared for Escherichia coli (E. coli) detection. The NPG was fabricated on gold electrode, onto which thiolated oligonucleotides (SH-DNA) and mercaptohexanol (MCH) were covalently linked forming a mixed self-assembled monolayer (SAM). The hybridization between the SH-DNA/MCH modified biosensor and E. coli DNA was monitored with differential pulse voltammetry measurement using methylene blue (MB) as the hybridization indicator. The biosensor can detect 1 × 10^?12 M DNA target and 50 cfu/μL E. coli without any nucleic acid amplification steps. The detection limit was lowered to 50 cfu/mL after 5.0 h of incubation.     

Fluorescence detection of total count of Escherichia coli and Staphylococcus aureus on water-soluble CdSe quantum dots coupled with bacteria

The aim of this paper was to demonstrate a fluorescence measurement method for rapid detection of two bacterial count by using water-soluble quantum dots (QDs) as a fluorescence marker, and spectrofluorometer acted as detection apparatus, while Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were as detection target bacteria. Highly luminescent water-soluble CdSe QDs were first prepared by using thioglycolic acid (TGA) as a ligand, and were then covalently coupled with target bacteria. The bacterial cell images were obtained using fluorescence microscopy. Our results showed that CdSe QDs prepared in water phase were highly luminescent, stable, and successfully conjugated with E. coli and S. aureus. The fluorescence method could detect 10²-10⁷ CFU/mL total count of E. coli and S. aureus in 1-2 h and the low detection limit is 10² CFU/mL. A linear relationship of the fluorescence peak intensity and log total count of E. coli and S. aureus have been established using the equation Y = 118.68X − 141.75 (r = 0.9907).     

Inductance-based sensing technique for wireless, remote-query measurement in liquid media

A novel inductance-based sensing technique is presented for remote query measurement in different liquid media including organic solvents and inorganic solutions. The inorganic solutions tested included salt solutions of different concentrations, and the organic solvents detected included 1,4-dioxane and tetrahydrofuran. To extend the application of the sensor, bacterial culture media were also detected, and the growth of Escherichia coli (E. coli) was controlled. The influential factors which may affect the inductance responses were studied in detail. It was found that quantitative relationships exist between the sensor’s inductance response and the physico-chemical parameters of the liquid media. The sensor’s inductance response (L) decreases with the increase of salt concentration (C) and its ionic valence (e) according to a semi-logarithmic equation LgL = ?aeC + b, where a and b are constants, which is in accordance with the theoretically deduced equation. The inductance variation rate (ΔK) increases directly with the temperature (T): ΔK = a′ T + b′. As for organic solutions, the sensor’s inductance was found to increase with the increasing permittivity of the organic solution. The wireless sensor we designed is simple and easy to manipulate. It has the potential for remote determination of not only chemical substances but also microbiological species such as bacteria. Using the newly developed inductance-based sensor, the pathogenic E. coli was monitored with a limit of detection of 10 cells/mL and a linear semi-logarithmic range of 1.0 × 10¹ to 2.5 × 10⁹ cells/mL.     

Fe2O3@Au core/shell nanoparticle-based electrochemical DNA biosensor for Escherichia coli detection

A Fe₂O₃@Au core/shell nanoparticle-based electrochemical DNA biosensor was developed for the amperometric detection of Escherichia coli (E. coli). Magnetic Fe₂O₃@Au nanoparticles were prepared by reducing HAuCl₄ on the surfaces of Fe₂O₃ nanoparticles. This DNA biosensor is based on a sandwich detection strategy, which involves capture probe immobilized on magnetic nanoparticles (MNPs), target and reporter probe labeled with horseradish peroxidase (HRP). Once magnetic field was added, these sandwich complexes were magnetically separated and HRP confined at the surfaces of MNPs could catalyze the enzyme substrate and generate electrochemical signals. The biosensor could detect the concentrations upper than 0.01 pM DNA target and upper than 500 cfu/mL of E. coli without any nucleic acid amplification steps. The detection limit could be lowered to 5 cfu/mL of E. coli after 4.0 h of incubation.     

A nanoparticle-supported fluorescence resonance energy transfer system formed via layer-by-layer approach as a ratiometric sensor for mercury ions in water

This article describes the design and preparation of a novel fluorescence resonance energy transfer (FRET)-based ratiometric sensor with the polymer nanoparticle as scaffold for detecting Hg²⁺ in aqueous media. In this study, a fluorescent dye fluorescein isothiocyanate (FITC, served as the donor) and a spirolactam rhodamine derivative (SRHB, served as mercury ion probe) were covalently attached onto polyethylenimine (PEI) and polyacrylic acid (PAA) respectively; and a ratiometric sensing system was then formed through the deposition of the donor- and probe-containing polyelectrolytes onto the negatively charged polymer particles via the layer-by-layer approach. The ratiometric fluorescent signal change of the system is based on the intra-particle fluorescence resonance energy transfer (FRET) process modulated by mercury ions. Under optimized structural and experimental conditions, the particle-based detection system exhibits stable response for Hg²⁺ in aqueous media. More importantly, in this newly developed particle-based detection system formed by LBL approach, varied numbers of the PAA/PEI layers which served as the spacer could be placed between the donor-containing layer and the probe-containing layer, hence the donor–acceptor distance and energy transfer efficiency could be effectively tuned (from ca. 25% to 76%), this approach has well solved the problem for many particle-based FRET systems that the donor–acceptor distance cannot be precisely controlled. Also, it is found that the ratiometric sensor is applicable in a pH range of 4.6–7.3 in water with the detection limit of 200 nM. This approach may provide a new strategy for ratiometric detection of analytes in some environmental and biological applications.     

Fluorescence detection of Escherichia coli on mannose modified ZnTe quantum dots

Rapid detection and identification of Escherichia coli(E.coli) is essential to prevent its quickly spread.In this study,a novel fluorescence probe based on ZnTe quantum dots(QDs) modified by mannose(MAN)had been prepared for the determination of E.coli.The results showed that the obtained QDs showed excellent selectivity toward E.coli,and presented a good linearity in range of 1.0×10~5～1.0×10~8 CFU/mL.The optimum fluorescence intensity for detecting E. coli was found to be at pH 7.0 with a temperature of25℃ and incubation time of 20 min.Under these optimum conditions,the detection limit of E.coli was4.6×10~4 CFU/mL.The quenching was discussed to be a static quenching procedure,which was proved by the quenching efficiency of QDs decreased with the temperature increasing.     

Ratiometric sensing of mercury(II) based on a FRET process on silica core-shell nanoparticles acting as vehicles

We report on a fluorescence resonance energy transfer (FRET)-based ratiometric sensor for the detection of Hg(II) ion. First, silica nanoparticles were labeled with a hydrophobic fluorescent nitrobenzoxadiazolyl dye which acts as a FRET donor. A spirolactam rhodamine was then covalently linked to the surface of the silica particles. Exposure of the nanoparticles to Hg(II) in water induced a ring-opening reaction of the spirolactam rhodamine moieties, leading to the formation of a fluorescent derivative that can serve as the FRET acceptor. Ratiometric sensing of Hg(II) was accomplished by ratioing the fluorescence intensities at 520 nm and 578 nm. The average decay time for the donor decreases from 9.09 ns to 7.37 ns upon addition of Hg(II), which proves the occurrence of a FRET process. The detection limit of the assay is 100 nM (ca. 20 ppb). The sensor also exhibits a large Stokes shift (>150 nm) which can eliminate backscattering effects of excitation light.

Combining biofunctional magnetic nanoparticles and ATP bioluminescence for rapid detection of Escherichia coli

A rapid, specific and sensitive method for assay of Escherichia coli (E. coli) using biofunctional magnetic nanoparticles (BMNPs) in combination with adenosine triphosphate (ATP) bioluminescence was proposed. The BMNPs were fabricated by immobilizing a specific anti-E. coli antibody on the surface of amine-functionalized magnetic nanoparticles (about 20 nm in diameter), and then was applied to capture the target bacteria E. coli from samples. The BMNPs exhibited high capture efficiency to E. coli. Transmission electron microscope (TEM) images showed that the BMNPs were bound to the surface of entire E. coli cells. The target bacteria became magnetic so that could be isolated easily from the sample solution by employing an external magnetic field. The concentration of E. coli captured by the BMNPs was then detected by an ATP bioluminescence method. The optimization of ATP measurement was carried out to improve the detection sensitivity. The proposed method was applied to detect the E. coli inoculated into pasteurized milk with low detection limit (20 cfu/mL) and short detection time (about 1 h).     

Rapid detection of Escherichia coli by flow injection analysis coupled with amperometric method using an IrO2–Pd chemically modified electrode

An amperometric method for the rapid detection of Escherichia coli (E. coli) by flow injection analysis (FIA) using an IrO₂–Pd chemically modified electrode (CME) was developed in this paper. The method is based on a good marker β-d-galactosidase which was found in E. coli strains. β-d-galactosidase was produced by the induction of isopropyl β-d-thiogalactopyranoside (IPTG) and released from E. coli cells through the permeabilization of both polymyxin B nonapeptide and lysozyme to E. coli cells wall. The released β-d-galactosidase could catalyze the hydrolysis of the substrate p-aminophenyl β-d-galactopyranoside (PAPG) in the culture medium to produce 4-aminophenol which was proportional to the concentration of E. coli. Hence, E. coli could be detected by the determination of 4-aminophenol. An IrO₂–Pd CME, which showed high sensitivity in determination of 4-aminophenol, was prepared as the electro-detector in FIA. The amplified response current of 4-aminophenol obtained at the IrO₂–Pd CME was linear with the concentration of E. coli ranging from 2.0 × 10² to 1.0 × 10⁶ cfu/mL, the detection limit of this method to E. coli was 150 cfu/mL and the complete assay could be performed in 3 h.     

Ratiometric and turn-on monitoring for heavy and transition metal ions in aqueous solution with a fluorescent peptide sensor

A novel fluorescent peptide sensor containing tryptophan (donor) and dansyl fluorophore (acceptor) was synthesized for monitoring heavy and transition metal (HTM) ions on the basis of metal ion binding motif (Cys-X-X-X-Cys). The peptide probe successfully exhibited a turn on and ratiometric response for several heavy metal ions such as Hg²⁺, Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ in aqueous solution. The enhancements of emission intensity were achieved in the presence of the HTM ions by fluorescent resonance energy transfer (FRET) and chelation enhanced fluorescence (CHEF) effects. The detection limits of the sensor for Cd²⁺, Pb²⁺, Zn²⁺, and Ag⁺ were lower than the EPA's drinking water maximum contaminant levels (MCL). We described the fluorescent enhancement, binding affinity, and detection limit of the peptide probe for HTM ions.     

Fluorescent peptide sensor for the selective detection of Cu

A new fluorescent peptidyl chemosensor for Cu²⁺ ions with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl chloride (acceptor), consists of the amino acids glycine and aspartic acid (Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly-Asp-Gly-Gly). Coordination of the Cu²⁺ ions to the metal chelating unit results in fluorescent quenching of both the donor and acceptor fluorophores. Although it was determined that Cu²⁺ binding causes no change in FRET efficiency, emission and Cu²⁺-induced quenching of the acceptor dye can be used to monitor the concentration of the copper ions, with a detection limit of 32 μg L⁻¹. The sensor also demonstrated sensitivity, reversibility and selectivity towards Cu²⁺ in a transition metal matrix at pH 7.0.     

Rapid determination of microorganisms using a flow-injection system

An automated method for the rapid determination of microorganisms using a flow-injection system is presented. Electrochemical measurement of a mediator reduced by microbial metabolism allowed the determination of fungi and bacteria in a few minutes. The lowest detection limit was 5 × 10⁶ colony-forming units (cfu) ml^?1 for Escherichia coli. Correlation between the flow-injection method and standard microbiological methods was excellent (r = 0.997, n = 4 for Beauveria bassiana; r = 0.997, n = 7 for E. coli). The flow-injection system was applied to the on-line control of an E. coli cultivation.     

G‐Tetraplex‐Induced FRET within Telomeric Repeat Sequences Using PyA‐PerA as Energy Donor–Acceptor Pair

G‐tetraplex induced fluorescence resonance energy transfer (FRET) within telomeric repeat sequences has been studied using a nucleoside‐tethered FRET pair embedded in the human telomeric G‐quadruplex forming sequence (5′‐A GGG TT ^Py A GGG TT ^Per A GGG TTA GGG‐3′, Py=pyrene, Per=perylene). Conformational change from a single strand to an anti‐parallel G‐quadruplex leads to FRET from energy donor ( ^Py A ) to acceptor ( ^Per A ). The distance between the FRET donor/acceptor partners was controlled by changing the number of G‐quartet spacer units. The FRET efficiency decreases with increase in G‐quartet units. Overall findings indicate that this could be further used for the development of FRET‐based sensing and measurement techniques.