A 'turn-on' FRET peptide sensor based on the mercury binding protein MerP

A new fluorescent peptidyl chemosensor based on the mercury binding MerP protein with fluorescence resonance energy transfer (FRET) capabilities has been synthesized via Fmoc solid-phase peptide synthesis. The metal chelating unit, which is flanked by the fluorophores tryptophan (donor) and dansyl (acceptor), contains amino acids from MerP's metal binding loop (sequence: dansyl-Gly-Gly-Thr-Leu-Ala-Val-Pro-Gly-Met-Thr-Cys-Ala-Ala-Cys-Pro-Ile-Thr-Val-Lys-Lys-Gly-Gly-Trp-CONH(2)). A FRET enhancement or 'turn-on' response was observed for Hg(2+) as well as for Zn(2+), Cd(2+) and Ag(+) in a pure aqueous solution at pH 7.0. The emission intensity of the acceptor was used to monitor the concentration of these metals ions with detection limits of 280, 6, 103 and 496 microg L(-1), respectively. No response was observed for the other transition, alkali and alkaline earth metals tested. The fluorescent enhancement observed is unique for Hg(2+) since this metal generally quenches fluorescence. The acceptor fluorescence increase resulting from metal binding-induced FRET suggests a sensor that is inherently more sensitive than one based on quenching by the binding event.     

Chelating Properties of Salicylhydroxamic Acid-functionalized Polystyrene Resins and Its Application to Efficient Removal of Heavy Metal Ions from Aqueous Solutions

Salicylhydroxamic acid(SHA) was covalently bound onto crosslinked polystyrene spheres(CPSs) via the Friedel-Crafts alkylation reaction between chloromethylated CPSs and SHA in the presence of SnCl4 as the Lewis acid catalyst. The resulted SHA-CPSs possessed very strong chelating ability for heavy metal ions. In particular, the saturated adsorption amount of SHA-CPSs for Cu²⁺ ions could reach as high as 34.2 mg/g at 318 K. The chelating capability of SHA-CPSs towards heavy metal ions was pH and temperature dependent. SHA-CPSs also showed selective metal coordination with the chelating capacity decreasing in the order of Cu²⁺>Zn²⁺>>Pb²⁺. The adsorption isotherms conformed well to the Langmuir model, and the adsorption process was found to be entropy-driven and endothermic. Besides, SHA-CPSs possessed the excellent reusability.     

6-(N,N-Dimethylamino)-2-naphthoylacryl Acid: a Highly Selective and Sensitive Fluorescent Sensor of Copper(II)

A novel fluorescent probe, 6-(N,N-dimethylamino)-2-naphthoylacryl acid(ACADAN) was designed and synthesized as a fluorescent sensor for Cu²⁺ in aqueous media. Significant amplification of fluorescence signals without causing any discernible change of maximum fluorescence emission wavelength(λ_max) was observed upon the addition of Cu²⁺. Importantly, ACADAN is capable of recognizing Cu²⁺ selectively in aqueous media in the presence of various biologically relevant metal ions and the prevalent toxic metal ions in the environment with high sensitivity(detection limit was 0.1 μmol/L).     

Anthracene derivatives bearing sulfur atoms or selenium atoms as fluorescent chemosensors for Cu and Hg: different selectivity induced from ligand immobilization onto anthracene

Two new selenium containing anthracene derivatives and two new sulfur containing anthracene derivatives were synthesized as fluorescent chemosensors for Hg²⁺ and Cu²⁺. Compound 1 displayed a highly selective chelation enhanced fluorescence quenching (CHEQ) effect only with Cu²⁺, on the other hand, compounds 3 and 4 displayed highly selective chelation enhanced fluorescence (CHEF) effects only with Hg²⁺ among the metal ions examined.     

Enzymatically generated polyphenols as array-based metal-ion sensors

Phenolic polymers containing fluorescent reporter molecules were prepared via soybean hull peroxidase (SBP) catalysis, and used as metal-based sensor components. Specifically, we generated a variety of phenolic homopolymers containing p-cresol, p-phenylphenol, or p-methoxyphenol containing one of the two fluorophores: fluorescein and calcein. The fluorescence of the resulting polyphenols was dependent on the presence of metal ions, including Cu²⁺, Fe²⁺, Zn²⁺, Mn²⁺, and Fe³⁺. The fluorescence response was dependent on both, the metal ion and the phenolic monomer used in polyphenol synthesis, indicating that significant control over the selectivity and sensitivity of metal sensing can be achieved by varying the components that comprise the phenolic polymer. In some cases, metal-ion concentrations as low as 10 μM can be analyzed. The broad reactivity of SBP toward phenolic monomers enables the use of a wide array of structures and chemistries that can assist in metal-ion detection.     

11-Mercaptoundecanoic acid functionalized gold nanoclusters as fluorescent probes for the sensitive detection of Cu2+ and Fe3+ ions

Metal ions are physiologically essential,but excessive metal ions may cause severe risk to plants and animals.Here,we prepared gold nanoclusters(Au NCs) protected by 11-mercaptoundecanoic acid(11-MUA),which have excellent fluorescence properties for the detection of metal ions.The results showed that the copper ions(Cu~(2+)) and iron ions(Fe~(3+)) in the solution have obvious quenching effect on the fluorescence intensity of Au NCs.The detection range of Fe~(3+) was 0.8–4.5 mmol/L(R~2= 0.992) and 4.5–11.0 mmol/L(R~2= 0.997).And Cu~(2+) has a lower linear range(0.1–1.0 mmol/L,R2= 0.993).When EDTA was added into the reaction system,it was observed that the quenching effect of Cu~(2+) and Fe~(3+)on Au NCs showed different phenomenon.Then,the effect of metal ions on the fluorescence of Au NCs was investigated.The selective detection of Cu~(2+) was achieved by EDTA masking of Fe~(3+).In addition,we realized the metal ions detection application of Au NCs in the serum     

吡啶取代的Lindqvist型多酸的线性和非线性光学性质及阳离子检测功能的理论研究

采用密度泛函理论B3LYP方法计算了吡啶取代的Lindqvist型多酸(POMs)的线性(最大吸收波长, λ_max)和非线性光学(NLO)[超瑞利散射(HRS)的第一超极化率, β_HRS]性质, 探讨了其作为潜在阳离子检测剂的可能性. 金属离子吸附能计算结果表明, 吡啶取代的Lindqvist型多酸配体与金属离子之间均有较强的相互作用, 相互作用强度大小顺序为Ni²⁺>Cu²⁺>Co²⁺>Fe²⁺>Zn²⁺>Mg²⁺>Ca²⁺. 电子光谱和β_HRS计算结果表明, 引入适当的供、 受电子基团对该多酸配体进行修饰可有效调节线性和二阶NLO性质; 同时, 吡啶取代的Lindqvist型多酸对7种金属离子(Cu²⁺, Zn²⁺, Ca²⁺, Mg²⁺, Ni²⁺, Co²⁺, Fe²⁺)表现出了不同的检测行为.     

荧光素衍生物水杨醛荧光素腙的合成及对铜(Ⅱ)离子的检测

以荧光素酰肼与5-溴水杨醛反应合成了一种新型荧光素衍生物5-溴水杨醛荧光素腙(BSFH),采用红外、核磁、质谱、元素分析等技术手段对其进行了表征。 通过吸收光谱考察了在水溶液中BSFH对常见金属离子的选择性响应,发现BSFH在可见光区几乎无吸收,当加入常见金属离子时,吸收光谱上除了Cu²⁺之外的其它金属离子在496 nm处出现非常弱的吸收,而当Cu²⁺存在时,可以裸眼看到溶液颜色迅速从无色变为黄色,吸收光谱上在496 nm处出现了相对很强的吸收峰,并且随着Cu²⁺浓度的增加溶液的吸收强度不断增强,说明在水溶液中BSFH对Cu²⁺有很好的选择性。 实验结果表明,该化合物与Cu²⁺的化学计量比为1:1,Cu²⁺浓度线性范围为0.30~10 μmol/L,许多常见的金属离子不干扰Cu²⁺的测定,检测限为0.30 μmol/L,说明在水溶液中BSFH对铜离子具有很高的灵敏度。 据此,BSFH可以简单、快速、灵敏地在水溶液中识别和检测低浓度的铜离子。     

The synthesis and study of the fluorescent probe for sensing Cu2＋ based on a novel coumarin Schiff-base

A novel, fluorescent probe was synthesized from 2,4-dihydroxybenzaldehyde and 8-hydroxyquinoline for sensing Cu2+by the naked eye. The structure was confirmed by IR, MS,1H NMR,13 C NMR and the spectral properties of the probe were investigated. It exhibited strong fluorescence responses toward Cu2+and high selectivity over other metal ions. The binding constant between the probe and Cu2+was calculated using Benesi–Hildebrand equation.     

A naphthalimide–calixarene as a two-faced and highly selective fluorescent chemosensor for Cu or F

A new naphthalimide–calix[4]arene was synthesized as a two-faced and highly selective fluorescent chemosensor for Cu²⁺ or F⁻. This chemosensor displayed a selective fluorescence quenching effect only with Cu²⁺ among the various metal ions. On the other hand, among the various anions, the title chemosensor displayed a selective fluorescence quenching effect only with F⁻. The binding mode with F⁻ was further investigated using fluorescence changes and ¹H NMR experiments.     

A Highly Selective Fluorescent Chemosensor for Cu2+

A new Zn²⁺ probe L2-Zn(L2=naphthofuran carbonylhydrazone derivant) was synthesized as a fluorescence chemosensor for Cu²⁺, by which Cu²⁺ ion could be detected with high selectivity and sensitivity in a wide pH range via a displacement “turn-off” signaling strategy. Whereas the coordination between Zn²⁺ and L2 resulted in a considerable enhancement of typical luminescence of a naphthalofuran group in complex L2-Zn, the addition of Cu²⁺ ion led to a dramatic decrease in the emission intensity of probe L2-Zn at about 503 nm(excitation at 423 nm). The competitive fluorescent experiments showed that other metal ions, such as Hg²⁺, Fe³⁺, Ag⁺, Ca²⁺, Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, Cr³⁺ and Mg²⁺ could not impact the detection of Cu²⁺. The detection limit of the novel probe L2-Zn for Cu²⁺ ion was as low as 2.3×10^-7 mol/L, which is far lower than the guideline value of 1.6×10^-5 mol/L of the United States Environmental Protection Agency.     

A highly selective chemosensor for copper ion based on ICT fluorescence

Simple structural compounds 1 to 3 were synthesized.The presence of Cu²⁺ resulted in the fluorescence and absorption spectra change of 1 and 2,which indicated that 1 and 2 showed a highly selective response to Cu²⁺ over other metal ions.However,3 showed no selectivity for metal ions,which means that the compound could bind with several metal ions,such as,Ni²⁺,Zn²⁺,Cd²⁺.Hg²⁺, Pb²⁺,Fe³⁺,Mg²⁺,Ca²⁺,and Co²⁺,except Cu²⁺ and Ag⁺.The different spectral responses were attributed to the difference in binding sites for 1 and 3.     

Coumarin Modified Rhodamine Derivative： Fluorescent Chemosensor Selectively Recognizing Al^3＋ and Ca^2＋

A fluorescent probe with a coumarin moiety bound to rhodamine 6G hydrazide（l） was synthesized. Its sensing behavior toward various metal ions was investigated with fluorescence methods. Compound I displays different fluorescence emission responses to Al^3＋ and Ca^2＋ at the same excitation wavelength in the visible light region, while no changes occur after the addition of other metal ions. The binding ratios of the complexs of 1-Al^3＋ and 1-Ca^2＋ are both 2：1 according to the Job plot and high resolution mass spectrometer（HRMS） experiments. Moreover, emission spectrum of 1-Ca^2＋ complex and absorption spectrum of the rbodamine dyes overlap largely. When Al^3＋ was added to the 1-Ca2＋ system, calcium in complex 1-Ca2＋ can be displaced by Al^3＋, resulting in the output of another ratiometric sensing signal, which demonstrates that the 1-Ca^2＋ complex can be served as a new and effective fluorescence resonance energy transfer（FRET） donor for rhodamine derivatives.     

Rational Design of Ratiometric Fe3+ Fluorescent Probes Based on FRET Mechanism

As the most abundant transition metal element in mammals, iron(Fe) plays a vital role in life activities. It is of great significance to study the variation of Fe³⁺ level in living organisms. In virtue of the advantages of high sensitivity, good selectivity and low damage to living systems, the fluorescence detection of Fe³⁺ has attracted much attention. Compared with the intensity-based fluorescent probe, the ratiometric fluorescent probe has less interference of environmental and can realize quantitative detection. In this study, four ratiometric Fe³⁺ fluorescent probes, R1, R2, R3 and R4_, were designed and synthesized using fluorescence resonance energy transfer(FRET) mechanism to achieve quantitative detection of Fe³⁺. In the FRET systems, 1,8-naphthalimide fluorophore derivatives were adopted as donors while rhodamine B derivatives were selected as receptors. The connection sites of the donor and acceptor in R3 and R4 are different from those in R1 and R2. All the four probes showed good response and selectivity to Fe³⁺. The energy transfer efficiencies of R3 and R4 were obviously higher than those of R1 and R2. This work provided a promising strategy for the development of fluorescent ratiometic Fe³⁺sensors.     

Tuning plasmon absorption of unmodified silver nanoplates for sensitive and selective detection of copper ions by introduction of ascorbate

Silver nanoplates as novel optical sensors for Cu^2＋ detection have been demonstrated.Silver nanoplates are synthesized via previous H_2O_2-NaBH_4 cyclic oxidation-reduction reactions.With introduction of ascorbate as mild reductants,Cu^2＋ ions are reduced into Cu~＋ and the Cu^＋ is further reduced to Cu,which is deposited on the surface of the silver nanoplates.The deposition of the Cu on the surface of the silver nanoplates allows a significant red-shift of their plasmon absorption.Therefore,trace Cu^2＋ can be detected.The shift of the plasmon absorption wavelength of silver nanoplates is proportional to the Cu^2＋concentration over a range of 40-340 μmol L~（-1） with a limit of detection of 9.0 μmol L~（-1）.Moreover,such silver nanoplate-based optical sensors provide good selectivity for Cu^2＋ detection,and most other metal ions do not disturb its detection.Moreover,the practicality of the proposed sensor was tested.This Cu^2＋assay is advantageous in its simplicity,selectivity,and cost-effectiveness.     

Highly Sensitive and Selective Chemosensor for Cu2+ Based on a Schiff Base

A new chemosensor based on a Schiff base has been designed and synthesized. Its sensing behavior toward various metal ions was investigated by fluorescence and UV-Vis spectroscopic methods. The fluorescence of the sensor was quenched and the color rapidly changed from canary yellow to brown after the addition of Cu²⁺, while no changes occurred after the addition of other metal ions, which contributes to the detection of Cu²⁺ with naked eyes. The fluorescence quantum yield of the ligand was calculated to be 0.52. The corresponding detection limit of Cu²⁺ was 5.721×10^-7 mol/L, and the 1:1 binding mode of the sensor with Cu²⁺ was revealed by Job's plot.     

Fluorescent sensor for Cu2+ with a tunable emission wavelength

A concept of fluorescent metal ion sensing with an easily tunable emission wavelength is presented and its principle demonstrated by detection of Cu(2+). A fluorescein dye was chemically modified with a metal chelating group and then attached to the terminus of ss-DNA. This was combined with a complementary ss-DNA modified with another fluorescent dye (ATTO 590), emitting at a longer wavelength. In the assembled duplex, fluorescence resonance energy transfer (FRET) between the fluorescein donor (excited at 470 nm) and the ATTO 590 acceptor (emitting at 624 nm) is observed. Proper positioning within the rigid DNA double helix prevents intramolecular contact quenching of the two dyes. Coordination of paramagnetic Cu(2+) ions by the chelating unit of the sensor results in direct fluorescence quenching of the fluorescein dye and indirect (by loss of FRET) quenching of the ATTO 590 emission at 624 nm. As a result, emission of the acceptor dye can be used for monitoring of the concentration of Cu(2+), with a 20 nM detection limit. The emission wavelength is readily tuned by replacement of ATTO-DNA by other commercially available DNA-acceptor dye conjugates. Fluorescent metal ion sensors emitting at >600 nm are very rare. The possibility of tuning the emission wavelength is important with respect to the optimization of this sensor type for application to biological samples, which usually show broad autofluorescence at <550 nm.     

Rhodamine 6G-based Chemosensor for the Visual Detection of Cu2＋ and Fluorescent Detection of Hg2＋ in Water

A novel water soluble chemosensor 1 based on rhodamine 6G spirolactam scaffold has been synthesized and characterized.Upon addition of a wide range of the environmentally and biologically relevant metal ions,chemosensor 1 shows a colorimetric selective Cu2＋ recognition from colorless to pink confirmed by UV-Vis absorption spectral changes,while it also exhibits a fluorometric selective Hg2＋ recognition by fluorescence spectrometry.An absorption enhancement factor over 17-fold with 1-Cu2＋ complex and a fluorescent enhancement factor over 45-fold with 1-Hg2＋ complex were observed.Their recognition mechanisms were assumed to be a 1：1 stoichiometry for 1-Cu2＋ complex and a 1：2 stoichiometry for 1-Hg2＋ complex,respectively,which were proposed to be different ligation leading to the ring-opening of rhodarnine 6G spirolactam.Furthermore,the detection limits for CU2＋ or Hg2＋ were 3.3 × 10-8 or 1.7x 10-7 mol/L,respectively.     

N,N-二甲基吡啶苯甲醛缩对二甲氨基苯甲酰腙的合成及对Cu2+的选择性识别

设计合成了可用于识别铜离子的化合物N,N-二甲基吡啶苯甲醛缩对二甲氨基苯甲酰腙(1), 通过¹H NMR, ¹³C NMR和MS等对其结构进行了表征; 采用荧光光谱和吸收光谱法研究了化合物1与金属离子间的相互作用. 结果表明, 化合物1对Cu²⁺ 呈现良好的选择性, Cu²⁺ 的加入使化合物1的荧光强度增强12.5倍, 加入其它金属离子如Fe³⁺, Zn²⁺, Pb²⁺, Hg²⁺, Cd²⁺, Co²⁺, Ni²⁺, Li⁺, K⁺, Ca²⁺, Mg²⁺ 和 Ag⁺, 仅引起化合物1荧光强度的微降. 采用双倒数线性回归拟合法计算可知, 化合物1与Cu²⁺ 形成了1: 1型强发光配合物, 结合常数为2.0×10⁷ L/mol.     

基于有机-无机介孔二氧化硅杂化材料对Cu^2和Co2+的选择性测定

合成了一种有机-无机介孔二氧化硅杂化材料(SBA-15-Tpy),通过透射电镜显微镜、X射线衍射、热重分析和N_2吸附-解吸曲线对其进行表征,并基于该材料建立了在水中对Cu²⁺和Co²⁺的选择性识别。研究表明,SBA-15-Tpy与Cu²⁺和Co²⁺结合后会分别在800 nm和510 nm处产生新的吸收峰,加入其它金属离子后不发生明显的吸收峰值变化。在最优条件下,检测Cu²⁺和Co²⁺的线性范围分别为2.0~200.0μmol/L和10.0~200.0μmol/L,检出限分别为0.48μmol/L和4.28μmol/L。将上述方法用于江水中Cu²⁺和Co²⁺的测定,回收率在96.0%~108.5%之间。