Porphyrin Supramolecule as Surface Carrier Modulator Imparts Hole Transporter with Enhanced Mobility for Perovskite Photovoltaics

Modulating the surface charge transport behavior of hole transport materials (HTMs) would be as an potential approach to improve their hole mobility, while yet realized for fabricating efficient photovoltaic devices. Here, an oxygen bridged dimer-based monoamine Fe^III porphyrin supramolecule is prepared and doped in HTM film. Theoretical analyses reveal that the polaron distributed on dimer can be coupled with the parallel arranged polarons on adjacent dimers. This polaron coupling at the interface of supramolecule and HTM can resonates with hole flux to increase hole transport efficiency. Mobility tests reveal that the hole mobility of doped HTM film is improved by 8-fold. Doped perovskite device exhibits an increased efficiency from 19.8 % to 23.2 %, and greatly improved stability. This work provides a new strategy to improve the mobility of HTMs by surface carrier modulation, therefore fabricating efficient photovoltaic devices.     

Volatile Dual-Solvent Assisted Intermediate Phase Regulation for Anti-Solvent-Free Perovskite Photovoltaics

The unprecedented development of perovskite solar cells (PSCs) makes them one of the most promising candidates for terawatt-scale green energy production with low cost. However, the high boiling point solvents during the solution-processed film deposition cause anisotropic crystal growth and toxic solvent vapor during high-throughput manufacturing. Here, a dual-component green solvent consisting of isopropyl acetate and acetonitrile is proposed to form a volatile perovskite precursor, which can realize the high-quality perovskite thin film deposition by intermediate phase regulation. A room-temperature stable perovskite intermediate phase is constructed with the engagement of isopropyl acetate as co-solvent, which suppresses the exploding nucleation rate in volatile perovskite precursor, providing a fine grain growth rate and wide processing window in scalable film deposition. The corresponding PSCs fabricated by blade coating without anti-solvents or gas quenching achieve power conversion efficiency (PCE) of 16.37 % and 15.29 % for the areas of 14.08 cm² and 37.83 cm², respectively.     

Separation and determination of trace uranium using a double-receptor sandwich supramolecule method based on immobilized salophen and fluorescence labeled oligonucleotide

A double-receptor sandwich supramolecule method for the separation and determination of trace uranium was proposed in this paper. One receptor is a salophen which can react with uranyl to form a uranyl-salophen complex, and another receptor is an oligonucleotide which can bind uranyl to form oligonucleotide-uranyl-salophen supramolecule. The salophen was immobilized on the surface of silica gel particles and used as the solid phase receptor for separating uranium from solution. The oligonucleotide was labeled with a fluorescent group and used as the labeled receptor for quantitatively analyzing uranium. In the procedure of separation and determination, uranyl ion was first combined with the solid phase receptor and then conjugated with the labeled receptor to form the sandwich-type supramolecule. The labeled receptor in the sandwich supramolecule was then eluted and determined by fluorescence analysis. The experimental results demonstrate that this method has a number of advantages such as high selectivity, excellent pre-concentration capability, high sensitivity, good stability and low cost. Under optimal conditions, the linear range for the detection of uranium is 0.5–30.0 ng mL⁻¹ with a detection limit of 0.2 ng mL⁻¹. The proposed method was successfully applied for the separation and determination of uranium in real samples with the recoveries of 95.0–105.5%.     

Antioxidant induced bulk passivation for efficient and stable hole transport layer-free carbon electrode perovskite solar cells

Defect passivation is one of the important strategies to improve the efficiency and stability of perovskite solar cells. In this work, 2,6-di‑tert‑butyl‑4-methylphenol (BHT) as antioxidant was introduced into the perovskite precursor solution to improve the quality of the prepared perovskite films, so that these films performed a larger and uniform grain size. Moreover, the −OH functional group in BHT interacts with I⁻, thus reducing the density of defect states and inhibiting the non-radiative recombination. The presence of hydrophobic groups in BHT protects the film from moisture erosion and improves the long-term stability of PSCs devices. The maximum photoelectric conversion efficiency of the constructed ITO/SnO₂/BHT-MAPbI₃/Carbon device is 16.88%, and the unpackaged cell maintains the initial efficiency of 99.3% after 698 h of storage under the environmental condition of 30% humidity. This work provides an efficient approach to improve the performance of printable hole transport layer-free carbon electrode perovskite solar cells.     

Novel ytterbium-doped CsPbI2Br thin-films–based inorganic perovskite solar cells toward improved phase stability

In this study, we used ytterbium (Yb²⁺) as a dopant in the CsPbI₂Br inorganic perovskite thin film and stabilized its black phase. Here, we varied the Yb²⁺ doping concentration in the CsPb_1?xYb_xI₂Br (x = 0–0.04) perovskite phase through simple solution method. The optimum concentration of Yb²⁺ showed improved morphology and crystal growth. The fabricated all-inorganic perovskite solar cells (IPVSCs) having CsPb_0.97Yb_0.03I₂Br-based champion device showed the highest 15.41% power conversion efficiency (PCE) for a small area of 0.09 cm² and 14.04% PCE for a large area of 1 × 1 cm² with excellent reproducibility, which is higher than the controlled CsPbI₂Br device. Detailed photovoltaic analysis revealed that the PCE, open-circuit voltage (V_OC), short circuit current density (J_SC) and fill factor (FF) of the final IPVSC device attributed to the suppressed charge recombination, better film quality, and well growth orientation of the perovskite film. Moreover, the champion CsPb_0.97Yb_0.03I₂Br device retains >85% initial efficiency after 280 h under 85 °C thermal annealings. Our results provide a new method to boost the performance of the photovoltaic application.     

A Cation‐Exchange Approach for the Fabrication of Efficient Methylammonium Tin Iodide Perovskite Solar Cells

Tin‐based halide perovskite materials have been successfully employed in lead‐free perovskite solar cells, but the overall power conversion efficiencies (PCEs) have been limited by the high carrier concentration from the facile oxidation of Sn²⁺ to Sn⁴⁺. Now a chemical route is developed for fabrication of high‐quality methylammonium tin iodide perovskite (MASnI₃) films: hydrazinium tin iodide (HASnI₃) perovskite film is first solution‐deposited using presursors hydrazinium iodide (HAI) and tin iodide (SnI₂), and then transformed into MASnI₃ via a cation displacement approach. With the two‐step process, a dense and uniform MASnI₃ film is obtained with large grain sizes and high crystallization. Detrimental oxidation is suppressed by the hydrazine released from the film during the transformation. With the MASnI₃ as light harvester, mesoporous perovskite solar cells were prepared, and a maximum power conversion efficiency (PCE) of 7.13 % is delivered with good reproducibility.     

Targeted Management of Perovskite Film by Co(II) Sulfophenyl Porphyrin for Efficient and Stable Solar Cells†

In the lead halide perovskite solar cells (PSCs), the redox reaction of I^– and Pb²⁺ ions in perovskite materials under the fabrication and operation processes causes the formation of defects to destroy the cell efficiency and long-term stability. Herein, we have employed a Co(II) sulfophenyl porphyrin (CoTPPS) to modify the perovskite film. The sulfonic group could coordinate with Pb²⁺ to efficiently passivate the uncoordinated Pb²⁺. Additionally, Co²⁺ ions in CoTPPS could react with I₂ generated under the thermal and light stress to yield the Co³⁺ and I^–, thus achieving the regeneration of I^– in perovskite film. Therefore, the CoTPPS could realize the targeted management of the imperfections in perovskite film. As a result, the modified PSCs reveal the remarkably enhanced cell performance. More importantly, the CoTPPS modified device retains 75% of its initial efficiency value storing at 85°C for 2000 h and about 70% of its efficiency when being continuously illuminated at a simulated sunlight for 1200 h. This strategy tackles the chemical reaction and inhibits the defect generation, thus improving the operational stability and efficiency of PSCs.      

Low temperature fabrication for high-performance semitransparent CsPbI2Br perovskite solar cells

All-inorganic Cs Pb I₂Br perovskite with suitable bandgap and excellent thermal stability has been reported as the most promising candidate for efficient perovskite solar cells（PSCs）. However, the high annealing temperature（> 250 °C） and poor stability of α-Cs Pb I₂Br greatly limit the future application in photovoltaic field. Herein, a facile method is reported to prepare α-Cs Pb I₂Br perovskite film with high stability at low temperature（70 °C） by incorporat...     

Biopolymer passivation for high-performance perovskite solar cells by blade coating

Thin films of perovskite deposited from solution inevitably introduce large number of defects,which serve as recombination centers and are detrimental for solar cell performance.Although many small molecules and polymers have been delicately designed to migrate defects of perovskite films,exploiting credible passivation agents based on natural materials would offer an alternative approach.Here,an ecofriendly and cost-effective biomaterial,ploy-L-lysine(PLL),is identified to effectively passivate the defects of perovskite films prepared by blade-coating.It is found that incorporation of a small amount(2.5 mg mL^-1)of PLL significantly boosts the performance of printed devices,yielding a high efficiency of 19.45% with an increase in open-circuit voltage by up to 100 mV.Density functional theory calculations combined with X-ray photoelectron spectroscopy reveal that the functional groups(-NH2,-COOH)of PLL effectively migrate the Pb-I antisite defects via Pb-N coordination and suppress the formation of metallic Pb in the blade-coated perovskite film.This work suggests a viable avenue to exploit passivation agents from natural materials for preparation of high-quality perovskite layers for optoelectronic applications.     

Improved photovoltaic performance from high quality perovskite thin film grown with the assistance of PC<Subscript>71</Subscript>BM

The strategy of sequentially spin-coating a perovskite film from the perovskite precursor and an electron transporting layer of [6,6]-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) is developed to simplify the fabrication procedure of perovskite solar cells. X-ray diffraction and scanning electron microscopy indicate that PC₇₁BM film on perovskite layer can retard the evaporation of dimethyl sulfoxide (DMSO) efficiently, thus prolonging the transformation of intermediate phase to perovskite crystals, leading to a high quality perovskite thin film. The solar cells with the structure of indium tin oxides (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/CH₃NH₃PbI₃/PC₇₁BM/bathocuproine (BCP)/Ag made from this simplified method exhibit a higher efficiency (12.68%) than those from the conventional one-step method (9.49%).     

Improved Performance of All-Inorganic Perovskite Light-emitting Diodes via Nanostructured Stamp Imprinting

Halide perovskites are emerging emitters with excellent optoelectronic properties. Contrary to the large grain fabrication goal in perovskite solar cells, perovskite light-emitting diodes (PeLEDs) based on small grain enable efficient radiative recombination because of relatively higher charge carrier densities due to spatial confinement. However, achieving small-sized grain growth with superior crystal quality and film morphology remains a challenge. In this work, we demonstrated a nanostructured stamp thermal imprinting strategy to boost the surface coverage and improve the crystalline quality of CsPbBr₃ film, particularly confine the grain size, leading to the improvement of luminance and efficiency of PeLEDs. We improved the thermal imprinting process utilizing the nanostructured stamp to selectively manipulate the nucleation and growth in the nanoscale region and acquire small-sized grain accompanied by improved crystal quality and surface morphology of the film. By optimizing the imprinting pressure and the period of the nanostructures, appropriate grain size, high surface coverage, small surface roughness and improved crystallization could be achieved synchronously. Finally, the maximum luminance and efficiency of PeLEDs achieved by nanostructured stamp imprinting with a period of 320 nm are 67600 cd/m² and 16.36 cd/A, respectively. This corresponds to improvements of 123 % in luminance and 100 % in efficiency, compared to that of PeLEDs without the imprinting.     

Monodisperse Adducts-Induced Homogeneous Nucleation Towards High-Quality Tin-Based Perovskite Film

The classic solvent system can't sufficiently separate one-dimensional edge-sharing SnI₂ crystals in solution, which severely restricts the fabrication of high-quality tin-based perovskite film. Herein, a strong Lewis base (hexamethylphosphoramide, HMPA) has been introduced to coordinate Sn²⁺ to modulate solvation behaviours on perovskite precursor and regulate crystallization kinetics. The large molecular volume of HMPA and stronger bind energy of SnI₂ ⋅ 2HMPA (−0.595 eV vs −0.118 eV for SnI₂ ⋅ 2DMSO) change the solvation structure of SnI₂ from edge-sharing cluster to monodisperse adduct, which contributes to uniform nucleation sites and prolongs crystal growth process. Delightfully, a fully-covered perovskite film is formed on the large-area substrate and tin-based perovskite solar cells processed with HMPA exhibit an excellent efficiency of 13.46 %. This research provides novel insights and directions for the solution preparation of smooth and uniform large-area tin-based perovskite film.     

控制碘化铅形貌两步连续刮涂法大面积制备甲脒基钙钛矿薄膜

钙钛矿太阳能电池在实现高性能光伏器件方面展现出巨大的商业化应用前景,但面临着一个最主要的挑战是开发工业化规模生产的大面积高质量钙钛矿薄膜制备工艺。在本研究中,为解决大面积印刷难题,通过两步连续刮涂法制备甲脒基钙钛矿吸光层。两步法中第一步沉积的PbI₂很容易形成致密的薄膜,这将导致后续沉积的有机胺盐无法和PbI₂充分完全反应,在钙钛矿薄膜中残留PbI₂,这会严重影响载流子的传输。为了实现理想的多孔PbI₂薄膜结构,我们通过在PbI₂前驱体溶液中引入四亚甲基亚砜(THTO)。通过形成PbI₂·THTO络合物,PbI₂的结晶过程被有效控制,易形成片状的PbI₂晶粒并沿着垂直基底方向上排列,得到了理想的纳米通道。这为后续的有机胺盐渗入提供了理想的纳米通道。最终5 cm × 5 cm模组实现了18.65%的功率转化效率,并具有出色的存储和热稳定性。这一结果展现了两步连续刮涂法策略在制备大面积钙钛矿太阳能电池方面具备一定的优势。     

Fluorine-Containing Passivation Layer via Surface Chelation for Inorganic Perovskite Solar Cells

Minimizing surface defect is vital to further improve power conversion efficiency (PCE) and stability of inorganic perovskite solar cells (PSCs). Herein, we designed a passivator trifluoroacetamidine (TFA) to suppress CsPbI_3−xBr_x film defects. The amidine group of TFA can strongly chelate onto the perovskite surface to suppress the iodide vacancy, strengthened by additional hydrogen bonds. Moreover, three fluorine atoms allow strong intermolecular connection via intermolecular hydrogen bonds, thus constructing a robust shield against moisture. The TFA-treated PSCs exhibit remarkably suppressed recombination, yielding the record PCEs of 21.35 % and 17.21 % for 0.09 cm² and 1.0 cm² device areas, both of which are the highest for all-inorganic PSCs so far. The device also achieves a PCE of 39.78 % under indoor illumination, the highest for all-inorganic indoor photovoltaic devices. Furthermore, TFA greatly improves device ambient stability by preserving 93 % of the initial PCE after 960 h.     

Synthesis, structure, and magnetic properties of SrMn1−xGaxO3−δ (x=0-0.5) perovskites

We report the synthesis of SrMn_1−xGa_xO_3−δ perovskite compounds and describe the dependence of their phase stability and structural and physical properties over extended cation and oxygen composition ranges. Using special synthesis techniques derived from thermogravimetric measurements, we have extended the solubility limit of random substitution of Ga³⁺ for Mn in the cubic perovskite phase to x=0.5. In the cubic perovskite phase the maximum oxygen content is close to 3−x/2, which corresponds to 100% Mn⁴⁺. Maximally oxygenated solid solution compounds are found to order antiferromagnetically for x=0-0.4, with the transition temperature linearly decreasing as Ga content increases. Increasing the Ga content introduces frustration into the magnetic system and a spin-glass state is observed for SrMn_0.5Ga_0.5O_2.67(3) below 12 K. These properties are markedly different from the long-range antiferromagnetic order below 180 K observed for the layer-ordered compound Sr₂MnGaO_5.50 with nominally identical chemical composition.     

多功能氨基酸衍生物钝化的高性能钙钛矿太阳能电池

采用含有羧基、氨基和苯基等多官能团的氨基酸衍生物分子(Fmoc-L-异亮氨酸,Fmoc-Ile-OH)钝化钙钛矿薄膜表面缺陷。首先,该氨基酸衍生物可降低钙钛矿薄膜中PbI₂杂质含量,并提高钙钛矿薄膜的颗粒尺寸。其次,氨基酸衍生物的引入可有效改善钙钛矿薄膜的光学特性和钙钛矿/电荷传输层界面载流子输运性能。另外,经钝化处理的钙钛矿太阳能电池表现出更优的器件二极管理想因子、更低的陷阱填充极限电压和更高的载流子复合电阻,这些结果证实了Fmoc-Ile-OH可有效钝化钙钛矿薄膜表面缺陷。最后,通过工艺条件优化,制得了转化效率为21.09%的高效钙钛矿太阳能电池器件,其性能远优于对照组器件的效率(18.00%)。     

Tetra‐ammonium Zinc Phthalocyanine to Construct a Graded 2D–3D Perovskite Interface for Efficient and Stable Solar Cells

The crystallographic defects inevitably incur during the solution processed organic‐inorganic hybrid perovskite film, especially at surface and the grain boundaries (GBs) of perovskite film, which can further result in the reduced cell performance and stability of perovskite solar cells (PSCs). Here, a simple defect passivation method was employed by treating perovskite precursor film with a hydrophobic tetra‐ammonium zinc phthalocyanine (ZnPc). The results demonstrated that a 2D‐3D graded perovskite interface with a capping layer of 2D (ZnPc)_0.5MA_n ? 1Pb_nI_3n + 1 perovskite together with 3D MAPbI₃ perovskite was successfully constructed on the top of 3D perovskite layer. This situation realized the efficient GBs passivation, thus reducing the defects in GBs. As expected, the corresponding PSCs with modified perovskite revealed an improved cell performance. The best efficiency reached 19.6%. Especially, the significantly enhanced long‐term stability of the responding PSCs against humidity and heating was remarkably achieved. Such a strategy in this work affords an efficient method to improve the stability of PSCs and thus probably brings the PSCs closer to practical commercialization.     

Mössbauer and magnetic studies of La0.8Sr0.2CoO3-δ CMR perovskite

In this paper we present ⁵⁷Co emission Mössbauer and AC magnetic susceptibility studies of La_0.8Sr_0.2CoO_3-δ perovskite. The observed coexistence of paramagnetic and magnetic subspectra in the ⁵⁷Co emission Mössbauer spectra, as well as the difference of their isomer shifts support the existence of electronic phase separation in this perovskite, in good agreement with the double exchange based cluster model.     

Manipulation of the Buried Interface for Robust Formamidinium-based Sn−Pb Perovskite Solar Cells with NiOx Hole-Transport Layers

Low band gap tin-lead perovskite solar cells (Sn−Pb PSCs) are expected to achieve higher efficiencies than Pb-PSCs and regarded as key components of tandem PSCs. However, the realization of high efficiency is challenged by the instability of Sn²⁺ and the imperfections at the charge transfer interfaces. Here, we demonstrate an efficient ideal band gap formamidinium (FA)-based Sn−Pb (FAPb_0.5Sn_0.5I₃) PSC, by manipulating the buried NiO_x/perovskite interface with 4-hydroxyphenethyl ammonium halide (OH-PEAX, X=Cl⁻, Br⁻, or I⁻) interlayer, which exhibits fascinating functions of reducing the surface defects of the NiO_x hole transport layer (HTL), enhancing the perovskite film quality, and improving both the energy level matching and physical contact at the interface. The effects of different halide anions have been elaborated and a 20.53 % efficiency is obtained with OH-PEABr, which is the highest one for FA-based Sn−Pb PSCs using NiO_x HTLs. Moreover, the device stability is also boosted.     

Pressure-induced phase transition and octahedral tilt system change of Ba2BiSbO6

High-resolution X-ray synchrotron powder diffraction studies under high-pressure conditions are reported for the ordered double perovskite Ba₂BiSbO₆. Near 4 GPa, the oxide undergoes a pressure-induced phase transition. The symmetry of the material changes during the phase transition from space group to space group I2/m, which is consistent with a change in the octahedral tilting distortion from an a⁻a⁻a⁻ type to a⁰b⁻b⁻ type using the Glazer notation. A fit of the volume-pressure data using the Birch-Murnagaham equation of state yielded a bulk modulus of 144(8) GPa for the rhombohedral phase.