维生素E与磷脂酰胆碱的单分子膜研究

测定了下列气水界面单分子膜的表面压－平均分子面积等温线：（１）ｄ－α，ｄ－β，ｄ－γ－，和ｄ－δ－生育酚等４种维生素Ｅ与ＤＰＰＣ，ＤＯＰＣ及ＤＬＰＣ的混合物，（２）ｄ－α－生育酚等摩尔比的ＤＰＰＣ和ＤＬＰＣ的混合物，（３）胆固醇与ＤＰＰＣ，ＤＬＰＣ的混合物，讨论了维生素Ｅ色满环上甲基对其在ＰＣ单分子膜中物理化作用的影响，实验结果表明：（１）维生素Ｅ以ｄ－α〉ｄ－β－≈ｄ－γ〉ｄ－δ的次序引起的ＤＰ     

LB膜技术对葡萄糖氧化酶分子构象的影响

利用π－Ａ曲线、布儒斯特角显微镜（ＢＡＭ）及ＣＤ光谱对葡萄糖氧化酶（ＧＯＤ）的甲醇溶液铺展在ＣｄＣｌ２水溶液和纯水表面上形成的单分子膜进行了研究，以了解ＧＯＤ分子的自组和折叠情况，发现甲醇或者ＣｄＣｌ２都能ＧＯＤ分子更加疏水，易形成单分子膜，铺展在ＣｄＣｌ２溶液上比铺展在纯水上更加能使ＧＯＤ的单分子膜排列紧密，在表面压较高时，能观察到形成了第二层膜，并且使ＧＯＤ分子的构象从β－折叠片向α－螺旋转变     

高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能。发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶．当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶进入ＨＤＰＥ晶相。形成与ＬＤＰＥ在片晶水平上的共晶。     

高密度聚乙烯／低密度聚乙烯／乙烯—醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能，发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶，当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶入进ＨＤＰＥ晶相，形成与ＬＤＰＥ在片晶水平上的共晶。     

胆甾液晶二氮杂冠醚—Eu（Ⅲ）配合物LB膜和荧光性质研究

研究了胆甾液晶二氮杂冠醚Ｎ，Ｎ′－双（胆甾－５－烯－３β－氧羰甲基）－１，１０－二氮－４，７，１３，１６－四氧环十八烷（１）及其与Ｅｕ＾３＋的配合物（２），２一苯甲酸的混配物（３）的ＬＢ膜和荧光性质，结果表明：１，２和３在水溶液亚相液面形成稳定的单分子膜，但只有１的单分子面积受亚相ｐＨ的影响１，２和３的单分子膜都容易转移到石英基片上形成ＬＢ膜，其中２和３为Ｘ型，转移比分别为０．６和１．０，在ＬＢ膜     

极低密度聚乙烯与其它聚乙烯的共混

从结构角度，用ＤＳＣ，ＷＡＸＤ，ＳＡＸＳ研究了聚乙烯（ＰＥ）家族中极低密度聚乙烯（ＶＬＤＰＥ）与其它ＰＥ的互容性．ＨＤＰＥ／ＶＬＤＰＥ是共晶互容的，以其大量无规部分“溶解”了ＨＤＰＥ的结晶缺陷部分，提高了ＨＤＰＥ的Ｔｃ，Ｔｍ，Ｘｃ，结晶峰半高宽变窄，晶胞参数随组成而有最低值．ＶＬＤＰＥ与ＬＬＤＰＥ结构极为相似，ＤＳＣ及ＷＡＸＤ证明其共混物是共晶相容体系．ＬＤＰＥ／ＶＬＤＰＥ的结晶度符合按组成的计算值，但晶胞参数ａ，ｂ以及晶粒尺寸增大，ＤＳＣ上有分别相应于两组份的两个Ｔｍ；ＶＬＤＰＥ的Ｔｃ，Ｔｍ峰高之和高于按组份的计算值，ＬＤＰＥ的Ｔｍ，Ｔｃ则低于计算值．认为是正如ＬＬＤＰＥ／ＬＤＰＥ，ＬＤＰＥ向充满整个体积的ＶＬＤＰＥ中不断填入，以ＶＬＤＰＥ为晶核而结晶，形成相分离的不相容体系．     

EVA增容PP/HDPE共混体系的形态结构与性能

采用乙烯－醋酸乙烯酯共聚物（ＥＶＡ）作为聚丙烯（ＰＰ）／高密度聚乙烯（ＨＤＰＥ）共混体系的增容剂,通过冲击实验、拉伸实验、示差量热扫描仪（ＤＳＣ）和扫描电镜（ＳＥＭ）,系统地研究了共混体系的性能与其形态结构之间的。结果表明,ＥＶＡ是ＰＰ／ＨＤＰＥ共混物较好物增容剂,ＥＶＡ可以使ＰＰ、ＨＤＰＥ的晶相结构受到一定程度的破坏,增加ＰＰ和ＨＤＰＥ的相容性,同时共混物的冲击韧性明显提高。     

固相法氯化聚乙烯对PVC／LLDPE共混体系性能和形态的影响

采用固相法氯化聚乙烯（ＣＰＥ）对聚氯乙烯／线型低密度聚乙烯（ＰＶＣ／ＬＬＤＰＥ）共混体系进行增容改性。扫描电子显微镜、透射电子显微镜、动态力学分析和力学性能测试结果表明，ＣＰＥ对ＰＶＣ／ＬＬＤＰＥ共混体系具有很好的增容作用。     

POM／EVA共混物的研究

用力学测试、扫描电镜（ＳＥＭ）、热分析（ＤＳＣ）等手段研究了聚甲醛（ＰＯＭ）与乙烯－醋酸乙烯酯共聚物（ＥＶＡ）共混物（ＰＯＭ／ＥＶＡ）的力学性能及其微同形态；用聚甲醛与马来酸二丁酯（ＤＢＭ）的接枝物（ＰＯＭ－ｇ－ＤＢＭ）作相溶剂，能改变共的两相间的粘结力，从而提出了共混物的力学性能，ＳＥＭ观察表明接枝物的加入改变了ＰＯＭ／ＥＶＡ共混物的断裂方式，微观形态及结晶性能，对其热性能影响不大；通过改变ＰＯ     

高真空强静电场下半熔融态处理压电聚合物--PA11/PVDF共混物晶体结构和显微形态研究

使用ＷＡＸＤ和ＳＥＭ研究了高真空强静电场下半熔融态处理不同共混比例（ＰＡ１１／ＰＶＤＦ＝０／１００、２０／８０、４０／６０、６０／８０、８０／２０、１００／０）的压电聚合的ＰＡ１１／ＰＶＤＦ共混物压片的晶体结构和形态。ＷＡＸＤ分析表明,纯ＰＶＤＦ经不同强度静电场半熔融态处理后晶体结构并没有发生改变,均为β型ＰＶＤＦ;而纯ＰＡ１１经不同强度静电场半熔融态处理后晶体结构发生了改变,随电场强度的增加,部分ＰＡ１１由α型向δ′型转变。ＰＡ１１／ＰＶＤＦ共混物经不同强度静电场半熔融态处理后,当ＰＡ１１含量较小时,其结晶相为由β型ＰＶＤＦ和α型ＰＡ１１组成的混合相,并没有新相产生;而当ＰＡ１１含量较大时,共混物中的部分ＰＡ１１同样由α型向δ′型ＰＡ１１组成的混合相。ＳＥＭ观察表明,在无电场时,纯ＰＡ１１和纯ＰＶＤＦ呈混乱状     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Temperature dependence of poloxamer insertion into and squeeze-out from lipid monolayers

F68, a triblock copolymer of the form poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), is found to effectively seal damaged cell membranes. To better understand the molecular interaction between F68 and cells, we have modeled the outer leaflet of a cell membrane with a dipalmitoylphosphatidylcholine (DPPC) monolayer spread at the air-water interface and introduced poloxamer into the subphase. Subsequent interactions of the polymer with the monolayer either upon expansion or compression were monitored using concurrent Langmuir isotherm and fluorescence microscopy measurements. To alter the activity of the poloxamer, a range of subphase temperatures from 5 to 37 degrees C was used. Lower temperatures increase the solubility of the poloxamer in the subphase and therefore lessen the amount of material at the interface, resulting in a lower equilibrium spreading pressure. Additionally, changes in temperature affect the phase behavior of DPPC. Below the triple point, the monolayer is condensed at pertinent polymer insertion pressures; for temperatures immediately above the triple point, the monolayer is a heterogeneous mix of liquid expanded and condensed phase; for the highest temperature measured, the DPPC monolayer remains completely fluid. At all temperatures, F68 inserts into DPPC monolayers at its equilibrium spreading pressure. Upon compression of the monolayer, polymers are squeezed-out at surface pressures notably higher than those for insertion, with higher temperatures leading to a higher squeeze-out pressure. An increase in temperature decreases the solvent quality of water for the poloxamer, lowering solubility of the polymer in the subphase and thus increasing its propensity to be maintained within the monolayer to higher pressures.     

Influence of environmental conditions on the interfacial organisation of fengycin, a bioactive lipopeptide produced by Bacillus subtilis

The effect of the environmental conditions both on the behaviour of fengycin at the air-aqueous interface and on its interaction with DPPC was studied using surface pressure-area isotherms and AFM. The ionisation state of fengycin is at the origin of its monolayer interfacial properties. The most organised interfacial arrangement is obtained when fengycin behaves as if having zero net charge (pH 2). In a fully ionised state (pH 7.4), the organisation and the stability of fengycin monolayers depend on the ionic strength in the subphase. This can modulate the surface potential of fengycin and consequently the electrostatic repulsions inside the interfacial monolayer, as well as the lipopeptide interaction with the layer of water molecules forming the air-water interface. Intermolecular interactions of fengycin with DPPC are also strongly affected by the ionisation state of lipopeptide and the surface pressure (Pi) of the monolayer. A better miscibility between both interfacial components is observed at pH 2, while negatively charged lipopeptide molecules are segregated from the DPPC phase. A progressive desorption of fengycin from the interface is observed at pH 7.4 when Pi increases while at pH 2, fengycin desorption brutally occurs when Pi rises above Pi value of the intermediate plateau.     

Mixed DPPC/DPTAP monolayers at the air/water interface: influence of indolilo-3-acetic acid and selenate ions on the monolayer morphology

The interactions of mixed monolayers of two lipids, zwitterionic 1,2-dipalmitoyl-phosphatidylcholine (DPPC) and positively charged 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP), with phytohormone indolilo-3-acetic acid (IAA) and selenate anions in the aqueous subphase were studied. For this purpose, isotherms of the surface pressure versus the mean molecular area were recorded. Domain formation was investigated by using Brewster angle microscopy (BAM). The method of grazing incidence X-ray diffraction (GIXD) was also applied for the characterization of the organization of lipid molecules in condensed monolayers. It was found that selenate ions contribute to monolayer condensation by neutralizing the positive net charge of mixed monolayers whereas IAA molecules penetrated the lipid monolayer, causing its expansion/fluidization. When both solutes were introduced into the subphase, a competition between them for interaction with the positively charged lipids in the monolayer was observed.     

Interactions of Pluronics with phospholipid monolayers at the air-water interface

Pluronics are triblock copolymers which are extensively applied excipients shown to interact with cell membranes. The aim of our study was to apply monolayer techniques and epifluorescence microscopy to investigate the interaction behavior between selected Pluronics and phospholipid monolayers which serve as a model of cell membranes. The results showed that Pluronic L61 with hydrophobic proportions much larger than those of F68 demonstrated condensed film-like surface behavior while F68 exhibited more expanded behavior. The increments of surface pressure and the changes of image were more obvious in adding Pluronic L61 than F68 to the subphase of dipalmitoylphosphatidylcholine (DPPC) monolayers, which indicated that the interaction may be related to van der Waals forces and hydrophobic interaction. Pluronics selected with higher hydrophobicities demonstrated larger surface activities and penetration abilities while being added to the subphase of DPPC and dimyristoylphosphatidylcholine (DMPC) monolayers. Pluronic P85 and F68 were found to be squeezed to subphase at higher surface pressures, which may be attributed to their relatively higher hydrophilicities.     

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.     

Effect of hydrocarbon chain and pH on structural and topographical characteristics of phospholipid monolayers

Structural characteristics (structure, elasticity, topography, and film thickness) of dipalmitoyl phosphatidylcholine (DPPC) and dioleoyl phosphatidylcholine (DOPC) monolayers were determined at the air-water interface at 20 degrees C and pH values of 5, 7, and 9 by means of surface pressure (pi)-area (A) isotherms combined with Brewster angle microscopy (BAM) and atomic force microscopy (AFM). From the pi-A isotherms and the monolayer elasticity, we deduced that, during compression, DPPC monolayers present a structural polymorphism at the air-water interface, with the homogeneous liquid-expanded (LE) structure; the liquid-condensed structure (LC) showing film anisotropy and DPPC domains with heterogeneous structures; and, finally, a homogeneous structure when the close-packed film molecules were in the solid (S) structure at higher surface pressures. However, DOPC monolayers had a liquid-expanded (LE) structure under all experimental conditions, a consequence of weak molecular interactions because of the double bond of the hydrocarbon chain. DPPC and DOPC monolayer structures are practically the same at pH values of 5 and 7, but a more expanded structure in the monolayer with a lower elasticity was observed at pH 9. BAM and AFM images corroborate, at the microscopic and nanoscopic levels, respectively, the same structural polymorphism deduced from the pi-A isotherm for DPPC and the homogeneous structure for DOPC monolayers as a function of surface pressure and the aqueous-phase pH. The results also corroborate that the structural characteristics and topography of phospholipids (DPPC and DOPC) are highly dependent on the presence of a double bond in the hydrocarbon chain.     

Annexin A1 interaction with a zwitterionic phospholipid monolayer: a fluorescence microscopy study

We present the results of a fluorescence microscopy study of the interaction of annexin A1 with dipalmitoylphosphatidylcholine (DPPC) monolayers as a function of the lipid monolayer phase and the pH of the aqueous subphase. We show that annexin A1-DPPC interaction depends strongly on the domain structure of the DPPC monolayer and only weakly on the subphase pH. Annexin A1 is found to be line active, with preferential adsorption at phase boundaries. Also, annexin A1 is found to form networks in the presence of a domain structure in the monolayer. Our results point toward an important contribution of the unique N-terminal domain to the organization of the protein at the interface.     

髓鞘碱性蛋白对细胞膜脂质分子DPPC、DPPE单层膜影响机理研究

本文通过Langmuir单层膜的表面压力-平均分子面积(π-A)曲线的测定与分析,分别对髓鞘碱性蛋白(MBP)与细胞膜中不同头部基团脂质分子二棕榈酰基磷脂胆碱(DPPC)和二棕榈酰基磷脂酰乙醇胺(DPPE)在空气/液体界面上的相互作用过程进行了系统研究.实验结果表明:(1)当界面上脂质含量一定时,亚相中随着MBP浓度的增大,DPPC、DPPE单层膜的等温线向平均分子面积较大的方向移动;(2)在单层膜表面压力为10 mN/m时,一个MBP分子分别结合140±3个DPPC分子和100±3个DPPE分子,随着表面压力增大,当MBP分子分别与两种磷脂分子相互作用时,MBP插入到磷脂单层界面的个数逐渐减少;(3)随着蛋白质浓度的增加,脂分子形成的单层膜变得较为疏松,且MBP分子易于插入到分子头部较小的DPPE单层膜中;(4)蛋白质的存在使DPPC单层膜的表面压力逐渐减小,且蛋白质浓度越大表面压力降低越多,DPPC被MBP带入到亚相中越多;(5)对于DPPE单层膜,蛋白质通过与DPPE相互作用插入到界面膜中,引起表面压力增大,且蛋白质浓度越高,压力变化量越大.