Effects of Sericite Modified by Macromolecular Dispersant on the Thermal,Mechanical and Electrical Properties of the NR/SBR Composites

A new hydrosoluble macromolecular dispersant and modifier, poly(ethylene glycol)-maleic anhydride-acrylic acid (PEG-MA-AA) terpolymer was synthesized via ring-opening reaction and free radical polymerization. The chemical structure of the PEG-MA-AA terpolymer was confirmed by Fourier transform infrared (FTIR) spectra and nuclear magnetic resonance spectroscopy (NMR), and its average molecular weight was determined by gel permeation chromatography (GPC). Modified sericite (MSE) was synthesized from sericite (SE) by the surface modification with PEG-MA-AA. The NR/SBR/MSE composites were prepared via the blending of the modified sericite and NR/SBR rubber. The thermal, mechanical and electrical properties of the composites were investigated by TGA, tensile test machine and high-insulation resistance meter. The results showed that the thermal stability and the mechanical and electrical insulation properties of NR/SBR/MSE composites were improved significantly. SEM also revealed that modified sericite possessed good dispersibility.     

In situ Formation of Mildly Oxidized Graphene Oxide/Polydicyclopentadiene Composite and Reinforced Mechanical and Thermal Performances

A series of mildly oxidized graphene oxide (MOGO) reinforced polydicyclopentadiene composites (MOGO/polyDCPD) were prepared via the in situ polymerization of DCPD in the presence of MOGO using ring-opening metathesis polymerization (ROMP). The inter-crosslinking networks between MOGO and polyDCPD backbones formed the reinforced composite structures, examined qualitatively by swelling tests. Bending tests, DMA and TGA measurements were employed to study the optimal loading content of MOGO for achieving the best mechanical and thermal properties of MOGO/polyDCPD composites. The results showed that the maximum mechanical performance was achieved with 0.1 wt% of MOGO loading. Excess MOGO led to decreased mechanical properties due to the poor solubility and uneven distribution of MOGO in the polymer matrix, which was confirmed by SEM. Meanwhile, the thermal stability of MOGO/polyDCPD composites showed a similar trend. The decomposition temperature at 10 wt% weight loss was significantly increased compared with the unfilled polyDCPD, but decreased with composition of MOGO above 0.1 wt%. The addition of MOGO may not only inhibit the back-biting from the catalyst and the formation of low molecular weight oligomers in the polymer, but also covalently immobilize them on its flake.     

Industrial cutting waste granite dust reinforced cardanol benzoxazine/epoxy resin hybrid composites for high-voltage electrical insulation applications

An attempt has been made to develop hybrid composites from benzoxazine monomer (C-ddm) hybridized with DGEBA epoxy resin (EP) and reinforced with varying weight percentages (20 wt%, 40 wt%, 60 wt%, 80 wt% and 100 wt%) of glycidoxypropyltrimethoxy- silane (GPTMS) functionalized granite dust (GD) obtained from industrial granite cutting and polishing process in order to utilize them for electrical insulation applications. The thermal stability of granite dust reinforced poly(EP-co-C-ddm) composites was studied by TGA analysis. Among the composites samples studied, 100 wt% GD reinforced poly(EP-co-C-ddm) composites possess better thermal stability than that of other neat matrices and composites. Among the composites prepared using varying weight percentages of functionalized GD reinforcement, it was observed that 80 wt% GD reinforced poly(EP-co-C-ddm) composites possesses better hydrophobic character than that of other neat matrices and composites. The value of LOI calculated for neat matrix (poly[EP-co-C-ddm]) and 20 wt%, 40 wt%, 60 wt%, 80 wt% and 100 wt% GD reinforced composites was found to be 22, 28, 34, 40, 43 and 45 respectively. The 80 wt% GD reinforced poly(EP-co-C-ddm) composites possess the higher values of tensile strength and flexural strength of 47 MPa and 140 MPa, respectively than those of their samples. The values of electrical surface resistivity and electrical volume resistivity of all the neat matrices and GD reinforced polybenzoxazine composites were found to be in the order of 10¹² and 10¹³ respectively. The values of dielectric strength obtained from break down voltage (BDV) for neat matrix [poly(EP-co-C-ddm)] and 20 wt%, 40 wt%, 60 wt%, 80 wt% and 100 wt% of GD reinforced poly(EP-co-C-ddm) composites are 15.0, 15.5, 16.5, 17.0, 17.0 and 17.0 kV/mm, respectively. Data obtained from thermal stability, hydrophobic behavior and dielectric studies it was inferred that the hybrid polymer composites developed in the present work can be conveniently used in the form insulators, sealants, adhesives and matrices where application demands at high-performance industrial and engineering applications.     

Polycarbonate carbon nanofiber composites

Carbon nanofiber (CNF) composites have the potential for creating inexpensive, semiconducting polymers. These composites require a homogeneous dispersion within the polymer. Many groups have focused on high shear methods such as twin screw extrusion. Although high shear methods produce a homogeneous dispersion, the aspect ratio of the nanofibers is reduced by the mechanical force. In this report, we present results for low shear composite formation via in situ polymerization of cyclic oligomeric carbonates. The composites were characterized by thermal gravimetric analysis, electrical conductivity, scanning electron microscopy and transmission electron microscopy. The composites exhibit minimal aggregation of the carbon nanofibers even at high weight percents. The polycarbonate/CNF composites exhibit an electrical conductivity percolation threshold of 6.3 wt% which is higher compared with similar CNF composites. The composites also show an increase in thermal stability of 40 °C as the CNF loading increases from 0 to 9 wt%.     

复合酸掺杂导电聚苯胺的性能研究

以苯胺为单体、过硫酸胺为氧化剂,由化学氧化聚合法在磺基水杨酸和硫酸的复合酸的水溶液中合成导电聚苯胺,并通过压片法、激光粒度分析、扫描电镜、差热分析及红外光谱对掺杂态聚苯胺的电导率、表面形貌及结构进行了研究.结果表明,复合酸掺杂聚苯胺的热稳定性比仅用硫酸掺杂聚苯胺的有了很大的提高;所得导电聚苯胺的粒度分布比较均匀(平均粒径约15.4μm);复合酸掺杂使聚苯胺分子链上的电荷呈离域化,掺杂程度提高.     

聚吡咯/多壁碳纳米管及其聚氨酯导电复合材料的制备和性能

以羧基化多壁碳纳米管(MWCNTs)做模版剂,采用化学氧化法将吡咯(Py)在羧基化MWCNTs表面聚合制备PPy/MWCNTs导电材料,将其添加到溶剂型聚氨酯(PU)溶液中制备了PPy/MWCNTs/PU导电复合材料,研究了Py用量对PPy/MWCNTs及其PU复合材料性能的影响.研究表明,随Py用量的增加,PPy/MWCNTs的长度不变,管径增大,sp~2和sp~3杂化C含量先提高后减少,N的掺杂梯度降低,PPy/MWCNTs的导电率高于羧基化MWCNTs和PPy.当Py用量为羧基化MWCNTs的20%时,其导电率最大.PPy/MWCNTs中N元素的掺杂程度及其管径变化是引起PPy/MWCNTs/PU复合材料的性能不同的主要原因.增加Py用量,MWCNTs中亲水的羧基因对PPy掺杂而消耗,相同导电材料用量时纳米导电粒子数目相对减少,PPy/MWCNTs/PU复合材料的耐水性能提高,定向应力、储能模量和玻璃化温度降低,导电率先增加后减小.当Py用量为羧基化MWCNTs的15%时,导电率最大.     

聚苯胺／聚乙烯醇导电复合膜的制备及性质研究

用较简单的化学氧化现场吸附聚合法（ｉｎ－ｓｉｔｕｐｏｌｙｍｅｒｉｚａｔｉｏｎ）制得了聚苯胺（ＰＡｎ）／聚乙烯醇（ＰＶＡ）导电复合膜．该膜具有较好的导电性和机械性能；其电导率可达５．８ｓ／ｃｍ，拉伸强度达１３ＭＰａ，断裂伸长率为１１０％左右．本文讨论了制备的各种条件对复合膜导电性能及力学性能的影响、稳定性及电化学活性；并采用循环伏安曲线、扫描电镜（ＳＥＭ）、ＦＴＩＲ谱及元素分析对该复合膜的结构和性能进行了表征．     

聚(苯胺-吡咯)共聚物/Fe3O4网状纳米纤维复合物的制备及吸波性能

在十六烷基三甲基溴化胺（CTAB）存在下,将苯胺（An）与吡咯（Py）两种单体在Fe3O4磁流体中原位化学氧化共聚制备了PAn-co-PPy/Fe3O4网状纳米纤维复合材料。通过改变CTAB的浓度、An/Py单体的配比及Fe3O4磁流体的用量获得了形态和电磁性能可调控的纳米纤维复合物。采用SEM、TEM、XRD、TG、电导和磁性能测试对复合物进行了表征,通过矢量网络分析仪获得了试样在2-18 GHz范围的复介电常数和复磁导率,经计算获取相应的微波反射损耗曲线。结果表明共聚复合物具有比单一的聚合物、共聚物、PAn/Fe3O4及PPy/Fe3O4更优越的微波吸收性能,样品（含Fe3O412.4 wt%）在9.0 GHz处具有最大的反射损耗为 -36.5 dB,损耗超过 -10 dB的频带宽度达4.7 GHz。     

纳米石墨薄片/聚吡咯复合材料的制备及导电性能

膨胀石墨经过超声处理制备了纳米石墨薄片。以其为导电填料，对甲苯磺酸为掺杂剂，FeCl₃·6H₂O为氧化剂，引发吡咯单体发生原位聚合，制备出纳米石墨薄片/聚吡咯(NanoGs/PPy)复合材料。利用红外光谱(FTIR)、扫描电镜(SEM)和透射电镜(TEM)表征了材料的组成和结构。结果表明，石墨薄片被聚吡咯完全包覆；并且以纳米级尺寸分散在聚吡咯基体中。热失重(TG)分析和电导率测试结果表明，复合材料的耐热性能和导电性能较纯聚吡咯有所提高。     

Polyaniline/Silver Nanoparticle-Doped Multiwalled Carbon Nanotube Composites

A simple method was used to synthesize the hybrid nanocomposites consisting of the functionalized multiwalled carbon nanotube composites (MWCNTs) with the polyaniline incorporated silver nanoparticles (a-MWCNT/PANI-Ag) through an emulsion polymerization at room temperature in order to enhance the electrical conductivity of polyaniline. The electrical conductivity of the composite with the incorporated Ag nanoparticles was 5% higher than the same weight percent for the composite without Ag nanoparticles, and the thermal stability was dramatically increased from 54% for the composite (a-MWCNT/PANI) to 69% through the incorporation of the Ag nanoparticles at 830°C. Additionally, the advantages of the Ag nanoparticles, including the improved electrical and thermal properties without damage to the polyaniline structure, were confirmed using FTIR and Raman spectroscopy.     

Mechanical,Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites

The meta kaolin (MK) clay particulate filler with different weight ratios viz., 0, 5, 10, 20 and 30 wt% were incorporated into castable polyurethane (PU)/polystyrene (PS) (90/10) interpenetrating polymer network (IPN). The effects of MK particulate filler loading on the mechanical and thermal properties of PU/PS (90/10) IPN composites have been studied. From the tensile behavior, it was noticed that a significant improvement in tensile strength and tensile modulus as an increase in MK filler content. Thermogravimetric analysis (TGA) data reveals the marginal improvement in thermal stability after incorporation of MK filler. TGA studies of the IPN composites have been performed in order to establish the thermal stability and their mode of thermal degradation. It was found that degradation of all composites takes place in two steps. Degradation kinetic parameters were obtained for the composites using three mathematical models. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic (SEM) technique.     

Synthesis of polyaniline/multiwall carbon nanotube composite via inverse emulsion polymerization

The composite of polyaniline (PANI) and multiwall carbon nanotube carboxylated through acid treatment (c‐MWCNT) was synthesized by chemical oxidative polymerization in an inverse emulsion system. The resultant composites were compared with products from aqueous emulsion polymerization to observe the improvements in electrical conductivity, structural properties, and thermal stability obtained by this synthetic method. Prior to the inverse emulsion polymerization, MWCNT was treated with a strong acid mixture to be functionalized with carboxylic acid groups. Carboxylic acid groups on surfaces induced selective dispersibility between polar and nonpolar solvents because of the increase of hydrophilicity. As the content of c‐MWCNT was increased, the electrical conductivity was increased by a charge transport function from the intrinsic electrical conductivity of MWCNT and the formation of a highly ordered dense structure of PANI molecules on the surface of c‐MWCNT. The images observed with electron spectroscopy showed the capping of c‐MWCNT with PANI. The growth of additional ordered structures of PANI/c‐MWCNT composite, which was observed through wide‐angle X‐ray diffraction patterns, supported the capping by PANI. It was observed that the doping of the composite had a significant relationship with the concentration of dodecylbenzenesulfonic acid (DBSA). The thermal stability of PANI composite was improved by the addition of c‐MWCNT; this was thought to be related with structure ordering by inverse emulsion polymerization. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2255–2266, 2008     

聚丙烯酰胺/凹凸棒土(Attapulgite)纳米复合高吸水性树脂的制备与性能

高吸水性树脂是一种新型功能高分子材料,由于其优越的吸水保水性能,已在农林园艺和生理卫生用品等领域得到了应用,但它仍然存在抗盐性能差、吸水后凝胶强度低等不足．近年来,有机．无机复合高吸水性树脂因具有较高的吸水性能和低廉的生产成本而受到了广泛的关注,使用的无机粘土主要有高岭土、蒙脱土和凹凸棒土等．粘土具有活性基团和键合点,加入到高吸水性树脂三维网络中可以改善树脂的网络结构,提高其综合性能．凹凸棒土是一种含水富镁铝的层链状硅酸盐,相对于其它粘土,它具有很好的抗盐、吸附和胶体性能。     

多孔聚苯胺-稻壳基白炭黑复合物的制备及循环伏安特性

以工业生产废弃的稻壳灰为原料,采用化学沉淀法制备了大孔径多孔稻壳基白炭黑,并在多孔白炭黑(RHSi)分散体系中,采用原位聚合法制备了聚苯胺(PAn)-稻壳基白炭黑复合物.采用热重分析、傅里叶红外光谱、透射电镜、低温氮吸附法和循环伏安法研究了复合物的结构及电化学性能.结果表明:聚苯胺-稻壳基白炭黑复合物具有多孔聚集体结构.当m_(PAn)/m_(RHSi)＝0.434时,复合物的比表面积为42.1 m~2/g,最可几孔径约为22 nm,适宜负载生物大分子,且在酸性及中性溶液中具有良好的电化学可逆性.     

高分子量聚苯胺/碳纳米管复合材料的合成与表征

在导电聚合物中,聚苯胺（PANI）因其导电性能优良,环境稳定性好,合成工艺简单,原料成本低廉等优点,被认为是最有可能实际应用的导电聚合物．然而用传统方法合成的聚苯胺由于其分子量小,分子链中存在缺陷而使其导电性能和力学性能大大降低,从而限制了其实际应用．而高分子量聚苯胺的导电性能和力学性能比一般聚苯胺有较大的提高．     

Preparation and characteristics of poly(benzoxazine-urethane)/graphene oxide composites: Toughness,mechanical and thermal properties

Poly(benzoxazine-urethane)/graphene oxide [poly(Bz-PU)/GO] composites were successfully prepared by blending benzoxazine (Bz) with graphene oxide (GO) and isocyanato (NCO)-terminated polyurethane prepolymer (PU), followed by thermally activated polymerization of the blends. The network was formed via the mutual reaction and intermolecular interaction among the hydroxyl of GO, NCO groups of PU and phenolic hydroxyl of Bz. The toughness shown from SEM images and tensile properties of polybenzoxazine (PBz) plastic composites can effectively be improved by alloying with PU and GO. The onset curing temperature and exothermic peak maximums of the polymerization obtained from differential scanning calorimetry decreased resulted from the GO addition. The thermogravimetric analysis showed that the incorporation of 0.5 wt% of GO slightly improved the thermal stability of poly(Bz-PU)/GO composites. Additionally, the storage modulus improved and the glass transition temperature (Tg) increased gradually as the increasing GO content not beyond a certain amount. Finally, the exothermic peaks of the polymerization were shifted to lower temperature, and the thermal stability increased for the ternary composites as the number average molecular weights (Mn) of polyol decreased.     

Influence of polyfurfuryl alcohol (PFA) loading on the properties of Nafion composite membranes

Composite membranes based on Nafion (N115) loaded with furfuryl alcohol (FA) were prepared by in situ acid-catalyzed polymerization technique, with the aim to improve the ionic conductivity of Nafion membranes. The functionalization, thermal stability, electrical properties and mechanical strength of N115-PFA composites was analyzed by means of Fourier transform infrared (FT-IR) attenuated total reflection (ATR) spectroscopy, small- and wide-angle X-ray scattering (SAXS/WAXS), thermogravimetric analysis (TGA), electrical impedance spectroscopy, dynamic vapor sorption (DVS) and dynamic mechanical analyser (DMA). The FA loading in the resultant composites had a positive correlation with the water uptake (W_u), water vapor uptake (W_vu), ionic conductivity and thermo-mechanical stability. At low polyfurfuryl alcohol (PFA) loading, these membranes displayed higher W_u and improved ionic and electrical properties. Further, the thermo-mechanical stability also gradually increased with the PFA loading. All the composites showed a well-defined glass transition temperature in DMA, which shifted to higher temperature with repeated PFA loading. Overall, the results indicate that the developed composite membrane are promising for low temperature polymer electrolyte membrane (PEM) fuel cells.     

Effect of carbon-black treatment by radiation emulsion polymerization on temperature dependence of resistivity of carbon-black-filled polymer blends

High dispersibility and stability of carbon black particles in low-density-polyethylene (LDPE) matrix were obtained by radiation emulsion polymerization on carbon particles surface, and electrical resistivities of its simple were examined. First carbon particles treatment on radiation emulsion polymerization on surface were synthesized by the reaction with a polymer-emulsion systems containing reactive group in the molecular unit, carbon particles and emulsifier. Then, the carbon particles treatment on radiation emulsion polymerization on surface was dispersed into LDPE, and its composites were prepared for electrical measurements. The effect of radiation crosslinking of the composite on the Positive temperature coefficient (PTC) and negative temperature coefficient (NTC) phenomenon was investigated. The experimental results showed that PTC and NTC effects of the composites were obviously influenced by the irradiation dose. Various microstructure-exploring means were used to study the conductive composite, such as scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM).     

Effects of polyaniline chain structures on proton conduction in a PEM host matrix

This study examined the effects of the conjugated chain structure of polyaniline (PAn) on proton transport in a proton exchange membrane (PEM) containing a small amount of PAn colloidal particles. The PEM host matrix consisted of a hydrophobic three-component polymer blend (TCPB) of poly(4-vinylphenol-co-methylmethacrylate) P(4-VP-MMA), poly(butyl methacrylate) (PBMA), and Paraloid^® B-82 acrylic copolymer resins; in which a hydrophilic network of 2-acrylamido-2-methyl propanesulfonic acid (AMPS), 2-hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol)dimethylacrylate (PEGDMA) was formed upon embedded polymerization. Colloidal PAn particles were added to the PEM matrix during the embedded polymerization of PEM. Two types of PAn colloidal particles with different chain structures and morphologies were synthesized by inverse miniemulsion polymerization and interfacial polymerization. The PAn(1) particles from inverse miniemulsion polymerization were bar-shaped, contained a higher fraction of quinoid diimine units than the scaffold-like PAn(2) particles from interfacial polymerization, and displayed a strong promotional effect on proton conduction. The oxidation state of the PAn particles was also varied by post-synthesis treatments to evaluate the effect of oxidation state on proton conduction. It was found that a mixed oxidation state such as the emeraldine form of PAn had the best enhancement effect. The PAn loading optimal for proton conductivity enhancement of the composite PEM was determined to be about 2 wt% of PAn(1).     

Structural and morphological aspects considerations of bilayers actuators based on polypyrrole/polyethylene glycole composites

Polypyrrole-polyethylene glycol (PPy-PEG) composite films were synthesized on stainless steel electrode by electrochemical method. Presence of PEG as a plasticizing polymer in the solution of polymerization strongly affects the morphological and swelling characteristics of the composite films. Results indicated that the increase in PEG weight percent to 0.07 leads to bi-layer actuators that move faster 18% than those made by neat polypyrrole. However, with further increase in PEG weight percent, the rate of movement decreases. On the other hand, at the same time, the efficiency of electrical energy conversion to the mechanical work decreases as wt% of the PEG is increased. SEM pictures of electro-chemically synthesized PPy and PPy-PEG layers prepared at the presence of various amounts of PEG showed that the thick layer of PPy is a cauliflower and granular structure. However PPy-PEG composites have a more integrate structure and smooth surface including small pores required to penetrate the counter ions.