电注入发光聚合物的能带工程

聚合物发光二极管以其独有的优点在显示方面显现了光明的前景，关于它的研究也很快成为国际上竞争激烈的热点。目前，聚合物发光二极管的各项性能距实际应用的要求还有相当一段距离。在提高聚合物发光二极管的各项性能的进程中，电注入发光聚合物的能带工程将起着积极的作用。本文简要地介绍了电注入发光聚合物的能带的形成、表征以及能带工程在聚合物发光器件中的应用。     

聚合物发光电化学池的研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(Ⅱ)

简要介绍本研究组 1997年以来在聚合物发光电化学池 (LEC)研究中取得的一些成果,包括发光聚合物的电化学性质及其HOMO和LUMO能级的电化学测量,LECp i n结的交流阻抗分析,双功能嵌段共聚物LEC,以及咪唑盐离子液体掺杂的室温准冷冻p i n结LEC等.     

电磷光发光聚合物*

电致磷光材料可以同时利用单线态和三线态激子发光,具有较高的发光效率,受到人们广泛的关注。本文综述了近年来通过共价键将磷光配合物单元连接在高分子链上制备电磷光发光聚合物的研究进展。总结了主链型、侧链型以及超支化结构的电磷光发光聚合物的研究进展,评述了上述几类电磷光聚合物的发光性能与分子结构的关系。最后从电磷光发光聚合物的分子结构设计出发,在电磷光发光聚合物领域业已取得进展的基础上,分析了电磷光发光聚合物在电致发光领域应用中存在的一些问题,并展望了电磷光聚合物今后的发展方向。     

氧化石墨烯掺杂PEDOT:PSS作为空穴注入层对有机发光二极管发光性能的影响

研究了氧化石墨烯(GO)掺杂聚(3,4-亚乙二氧基噻吩):聚(苯乙烯磺酸) (PEDOT:PSS)作为空穴注入层对有机发光二极管发光性能的影响. 在PEDOT:PSS水溶液中掺入GO, 经过湿法旋涂和退火成膜后, 不仅提高了空穴注入层的空穴注入能力和导电率, 透光率也得到了相应的提高, 从而使得有机发光二极管(OLED)器件的发光性能得到了提升. 通过优化GO掺杂量发现, 当GO掺杂量为0.8%(质量分数)时, 空穴注入层的透光率达到最大值(96.8%), 此时获得的OLED器件性能最佳, 其最大发光亮度和最大发光效率分别达到17939 cd·m^-2和3.74 cd·A^-1. 与PEDOT:PSS 作为空穴注入层的器件相比, 掺杂GO后器件的最大发光亮度和最大发光效率分别提高了46.6%和67.6%.     

掺杂聚丙烯酸增强钌络合物接枝聚丙烯酸交联纳米粒的电化学发光

本文合成了钌络合物接枝的聚丙烯酸(Ru-PAA),以此作为电化学发光(ECL)聚合物。当钌络合物为PAA的16.2%(质量比)时,ECL发光聚合物中钌络合物的接枝量达到了饱和。利用Ru-PAA上残余的多羧基和被掺杂PAA的多羧基,以氮丙啶为羧基交联剂,交联制备了PAA掺杂的ECL纳米粒。在ECL纳米粒内掺杂PAA时,ECL强度会增加,表明非发光的聚电解质PAA能够增强纳米粒内部接枝的ECL组分的电致化学发光。当非发光的PAA掺杂量为1/20时,ECL信号增强了43.2%。同时,制备的纳米粒也表现出了一些良好的性质,包括在长达15天的考察期中粒径和粒径分布的结构稳定性、约20nm的小粒径和良好的水溶性。当然,表面的残余羧基也为生物标记与分析提供了良好的条件。     

力刺激响应发光聚合物

具有力刺激响应发光特性的聚合物材料是刺激响应发光材料的重点研究方向,在聚合物力化学、应力检测、聚合物损伤监控、特种包装材料等领域受到了化学家和材料学家的广泛关注。这类材料通常是将具有力刺激响应发光特性的小分子作为发光力敏团,通过化学键合或物理掺杂的方式引入聚合物基体中制备得到。力刺激作用通过聚合物基体传导到发光力敏团,引起发光信号变化,实现力刺激响应发光。本文结合发光力敏团的力刺激响应发光原理和力刺激响应发光聚合物的制备方法,对力刺激响应发光聚合物进行了综述,期望对力刺激响应发光聚合物的研发设计和实际应用提供借鉴。     

有机/聚合物顶发射发光器件*

有机/聚合物顶发射发光器件可以解决传统底发射发光器件的一系列不足。高性能顶发射发光器件的实现,首先必须优化器件结构,其次对电子注入材料和空穴注入材料提出更高的要求。本文从提高顶发射器件中电子注入和空穴注入方法入手,综述了国内外有机/聚合物顶发射电致发光器件的发展历史,研究现状,最新进展及以后的发展方向。     

导电聚合物电致变色掺杂特征及表征参数

本文综述了电致显色材料的基本要求以及导电聚合物材料电致显色的机理、掺杂方式、掺杂特点。着重从电化学和紫外可见吸收光谱的角度阐述了电致显色材料的研究方法。通过改变电化学的过程,可获得一系列光谱特性,进而可得出导电聚合物掺杂和去掺杂过程对电致显色所产生的影响,为导电聚合物材料的改进和应用提供指导作用。最后,概述了目前电致显色材料研究的发展趋势。     

聚合物磷光材料的研究进展北大核心CSCD

金属配合物磷光材料因为其能同时利用单线态激子和三线态激子,引起了人们广泛关注。聚合物磷光材料(polymer phosphorescent materials,PPMs)同时具备小分子金属配合物的良好发光特性和高分子的优异物理性能,如容易挠曲、可溶液加工和良好的成膜性。本文综述了近年来聚合物磷光材料的研究进展,总结了聚合物磷光材料的合成方法及其在有机电致发光器件(OLED)方面的应用。最后从电磷光发光聚合物的分子结构设计出发,在电磷光发光聚合物领域业已取得进展的基础上,分析了电磷光发光聚合物在电致发光领域应用中存在的一些问题,并展望了电磷光聚合物今后的发展方向。     

聚合物磷光材料的研究进展

金属配合物磷光材料因为其能同时利用单线态激子和三线态激子,引起了人们广泛关注。聚合物磷光材料(polymer phosphorescent materials,PPMs)同时具备小分子金属配合物的良好发光特性和高分子的优异物理性能,如容易挠曲、可溶液加工和良好的成膜性。本文综述了近年来聚合物磷光材料的研究进展,总结了聚合物磷光材料的合成方法及其在有机电致发光器件(OLED)方面的应用。最后从电磷光发光聚合物的分子结构设计出发,在电磷光发光聚合物领域业已取得进展的基础上,分析了电磷光发光聚合物在电致发光领域应用中存在的一些问题,并展望了电磷光聚合物今后的发展方向。     

番红花红T与表面活性剂的作用及其在标记DNA中的应用

对阳离子染料番红花红Ｔ（ＳＴ）在阴离子表面活性剂存在时的溶液状态的吸收光谱和荧光光谱进行了研究。结果表明，低浓度阴离子表面活性剂与ＳＴ形成缔合物，导致ＳＴ的吸收与荧光强度降低；增大表面活性剂的浓度，其分子胶束前预聚集促使染料形成非荧光二聚体，导致荧光急剧猝灭，吸收光谱出现新的特征吸收峰；当表面活性剂浓度大于临界胶束浓度（ＣＭＣ）时，染料二聚体离解，ＳＴ单体增溶于胶团中形成新的高量子产率荧光体。本文     

Adsorption kinetics of a fluorescent dye in a long chain fatty acid matrix

This work reports the adsorption kinetics of a highly fluorescent laser dye rhodamine B (RhB) in a preformed stearic acid (SA) Langmuir monolayer. The reaction kinetics was studied by surface pressure-time (π-t) curve at constant area and in situ fluorescence imaging microscopy (FIM). Increase in surface pressure (at constant area) with time as well as increase in surface coverage of monolayer film at air-water interface provide direct evidence for the interaction. ATR-FTIR spectra also supported the interaction and consequent complexation in the complex films. UV-vis absorption and Fluorescence spectra of the complex Langmuir-Blodgett (LB) films confirm the presence of RhB molecules in the complex films transferred onto solid substrates. The outcome of this work clearly shows successful incorporation of RhB molecules into SA matrix without changing the photophysical characteristics of the dye, thus making the dye material as LB compatible.     

可录型光盘(CD-R)中染料膜层的光谱性质和光学特性

本文利用光在多层膜介质中的传播模型,计算了可录型光盘（ＣＤ Ｒ）中染料媒体的光学特性．表明在适合于ＣＤ Ｒ光盘记录的７８０ｎｍ波长处,由于多层膜中光的干涉作用,样品反射率随薄膜的厚度变化发生振荡．振荡的幅度和周期依赖于染料薄膜的复数折射率（ｎ＋ｉｋ）．当记录介质层的复数折射率在２．１＋ｉ０．０２至２．８＋ｉ０．１２之间时,能够满足ＣＤ Ｒ光盘对染料介质的要求．通过对三种菁染料薄膜的光谱性质分析及光学参数的模拟计算,证实了该方法用于染料薄膜光学特性研究的合理性．并为选择适合于光记录的染料薄膜的厚度范围提供了简便的方法     

新型不对称五甲川菁染料的合成及光稳定性能研究

合成并表征了5种不对称五甲川菁染料,染料在甲醇中的最大吸收和荧光光谱在646—666nm之间.光降解实验证明两端取代基结构呈不对称的染料,其光稳定性明显高于两端取代基结构对称的染料.染料荧光光谱和pH值的关系表明,染料中引入苯环取代基可以增强染料在酸性或碱性溶液中的稳定性.     

4-[2-(二甲氨基)乙氧基]-N-十八烷基-1,8-萘酰亚胺荧光染料的合成及其性能研究

以4-溴-1,8-萘酐为原料,合成脂溶性4-[2-(二甲氨基)乙氧基]-N-十八烷基-1,8-萘酰亚胺。对其进行了1H NMR和IR表征。考察了荧光染料在DMF、乙腈、丙酮、乙酸乙酯和乙醚5种溶剂中的荧光光谱和吸收光谱,发现由于溶剂效应,随溶剂极性由小到大,荧光光谱和吸收光谱的最大峰值波长逐渐红移。考察了不同金属离子和pH对荧光染料荧光光谱的影响,结果表明荧光强度随Fe3+、Zn2+、Co2+浓度增大而逐渐增强,Fe3+的影响最为显著;当pH<7时,荧光强度随着pH的降低逐渐增强;进一步考察了Fe3+、Zn2+、Co2+对吸收光谱的影响,结果发现吸收光谱均蓝移。分析认为荧光染料的光致电子转移被阻碍,实验结果表明,合成的新型荧光染料可用于溶液中金属离子和pH的检测。     

Preparation,Characterization and Electrocatalytic Studies on Copper Complex Dye Film Modified Electrodes

Copper complex dye (C.I. Direct Blue 200) film modified electrodes have been prepared by multiple scan cyclic voltammetry. The effect of solution pH and nature of electrode material on film formation was investigated. The optimum pH for copper complex film formation on glassy carbon was found to be 1.5. The mechanism of film formation on ITO seems to be similar to that on GC surface but completely different mechanism followed with gold electrode. Cyclic voltammetric features of our modified electrodes are in consistent with a surface‐confined redox process. The voltammetric response of modified electrode was found to be depending on pH of the contacting solution. UV‐visible spectra show that the nature of copper complex dye is identical in both solution phase and after forming film on electrode. The electrocatalytic behavior of copper complex dye film modified electrode towards oxidation of dopamine, ascorbic acid and reduction of SO₅^2? was investigated. The oxidation of dopamine and ascorbic acid occurred at less positive potential on film electrode compared to bare glassy carbon electrode. Feasibility of utilizing our modified electrode in analytical estimation of dopamine, ascorbic acid was also demonstrated.     

Inverted Opal Fluorescent Film Chemosensor for the Detection of Explosive Nitroaromatic Vapors through Fluorescence Resonance Energy Transfer

This paper reports an inverted opal fluorescence chemosensor for the ultrasensitive detection of explosive nitroaromatic vapors through resonance‐energy‐transfer‐amplified fluorescence quenching. The inverted opal silica film with amino ligands was first fabricated by the acid–base interaction between 3‐aminopropyltriethoxysilane and surface sulfonic groups on polystyrene microsphere templates. The fluorescent dye was then chemically anchored onto the interconnected porous surface to form a hybrid monolayer of amino ligands and dye molecules. The amino ligands can efficiently capture vapor molecules of nitroaromatics such as 2,4,6‐trinitrotoluene (TNT) through the charge‐transfer complexing interaction between electron‐rich amino ligands and electron‐deficient aromatic rings. Meanwhile, the resultant TNT–amine complexes can strongly suppress the fluorescence emission of the chosen dye by the fluorescent resonance energy transfer (FRET) from the dye donor to the irradiative TNT–amino acceptor through intermolecular polar–polar resonance at spatial proximity. The quenching response of the highly ordered porous films with TNT is greatly amplified by at least 10‐fold that of the amorphous silica films, due to the interconnected porous structure and large surface‐to‐volume ratio. The inverted opal film with a stable fluorescence brightness and strong analyte affinity has lead to an ultrasensitive detection of several ppb of TNT vapor in air.     

A Novel Ratiometric Oxygen Sensor Based On a Sextuple Hydrogen‐Bonding Self‐Assembly Molecular Heterodimer

A novel sextuple hydrogen‐bonding (HB) self‐assembly molecular heterodimer bearing an iridium complex as the indicator dye and two carbazoles as the reference dye, namely 6HB‐Irbt‐Cz , was synthesized, and its molecular structure was confirmed by ¹H NMR, ¹³CNMR, TOF‐MS and 2D NMR. Because of the inefficient energy transfer process between the carbazole and iridium complex units, 6HB‐Irbt‐Cz exhibits distinct ?uorescence/phosphorescence dual emission in neat film state. More importantly, the neat film sample of 6HB‐Irbt‐Cz could display linear ratiometric optical response toward oxygen in the full oxygen concentration range from 0 to 100 vol%, together with good stability, reversibility and rapid response‐recovery times. Note that this represents the first discovery of neat‐film‐based oxygen sensor capable of showing strictly linear ratiometric Stern‐Volmer behavior in the oxygen concentration of 0–100 vol%.     

Fluorescence-based Artemisinin Sensing Using a Pyronin B-doped Cellulose Film Reconstituted from Ionic Liquid

In this work, the first use of a cellulose hydrogel film reconstituted from ionic liquid (IL) 1-butyl-3-methylimidazolium chloride for the fluorescent determination of a plant antimalarial endoperoxide artemisinin is reported. The sensing material was fabricated by noncovalent co-immobilization of the fluorescent cationic dye pyronin B and complex of Mn(II) with anionic surfactant sodium dodecyl sulfate into the film prepared by dissolution and regeneration of microcrystalline cellulose in ionic liquid. Artemisinin determination in a concentration range of 0.25–8?µM is based on the dynamic quenching of pyronin B fluorescence (emission wavelength/excitation wavelength of 581/355?nm) that is accelerated by the above-indicated complex. The developed disposable cellulose film exhibits a high sensitivity toward artemisinin (limit of detection of 30?nM), sufficient selectivity for pharmaceutical analysis, a rapid response time (30?s), and a strong stable fluorescent signal for over a month. The applicability of the cellulose film was demonstrated by analyzing a dietary supplement with an extract from the traditional Chinese herb Artemisia annua. The accuracy of the fluorescent determination of artemisinin in the dietary supplement was supported by a liquid chromatography–mass spectrometry technique. The developed fluorescent cellulose film is a biocompatible and easy to handle sensing material that makes it suitable for wide variety applications in pharmaceutical analysis.     

A solvent-based intelligence ink for oxygen

A solvent-based, irreversible oxygen indicator ink is described, comprising semiconductor photocatalyst nanoparticles, a solvent-soluble redox dye, mild reducing agent and polymer. Based on such an ink, a film -- made of titanium dioxide, a blue, solvent-soluble, coloured ion-paired methylene blue dye, glycerol and the polymer zein -- loses its colour rapidly (<30 s) upon exposure to UVA light and remains colourless in an oxygen-free atmosphere, returning to its original blue colour upon exposure to air. In the latter step the rate of colour recovery is proportional to the level of ambient oxygen and the same film can be UV-activated repeatedly. The mechanism of this novel, UV-activated, solvent-based, colorimetric oxygen indicator is discussed, along with its possible applications.