High-performance liquid chromatographic separation of hematoporphyrin and its nickel,copper and zinc complexes on octadecyl-bonded stationary phase

Summary The feasibility of reversed-phase high-performance liquid chromatography for the separation of metal complexes of hematoporphyrin IX (Hp) is described. The retention order, Zn-complex<Hp (free acid)< Ni-complex<Cu-complex, is regular on an octadecylbonded stationary phase with different compositions of an aqueous methanol mobile phase. These four compounds can be successfully separated within about 8 min on a LiChrosorb RP-18 column (250×4-mm i.d.) with a 85:15 (vol/vol) mixture of methanol and phosphate buffer (pH 3) at a flow rate of 1 ml/min.     

Biological-chemical treatment of soils contaminated with exploration and production wastes

Oil-gas exploration and production (E&P) soils contaminated with total petroleum hydrocarbons (TPHs) have been tested for degradation by two different treatments: biological and chemical. Biological treatment includes the use of native microorganisms for transformation of the various hydrocarbons found in E&P soils. Degradation of TPH of 80 and 86%, was achieved for two different soils, respectively in control experiments. The effect of growth stimulants such as glucose, acetic acid, and valeric acid was examined on TPH degradation. Incorporation of inducer (valerate) enhanced the degradation up to 89 and 93%, for the two soils, respectively. A large portion (> 41%) of contaminant in one soil was comprised of compounds in the carbon range of C₁₀-C₁₆ and < 7% constituted carbon range of C₂₄-C_28. The degradation of C₁₀-C₁₆ compounds was higher (> 98%) as compared to C₂₄-C₂₈ compounds (< 75%). Likewise, the degradation rate was also higher (58 mg/kg/d) for lower compounds as compared to higher carbon range compounds (6.7 mg/kg/d). Experiments conducted on chemical treatment included the effect of chelators on stabilization of H₂O₂, comparative studies between buffer and water (used for soil preparation), and the effect of pH on TPH degradation. The rate of oxygen evolution from H₂O₂ was significantly reduced with use of either chelated iron or phosphate buffer using naphthelene as a model compound. Chemical treatment demonstrated a higher degradation of TPH from contaminated soils at pH 4.0 as compared to a pH of 7.0. More degradation was obtained with slurry prepared in phosphate buffer as compared to deionized water.     

The effect of twin‐tailed sidearms on sodium cation transport in synthetic hydraphile cation channels

The preparation of novel tris(macrocycle)s that transport Na⁺ through phospholipid bilayers is reported. All of the reported structures have the following structural elements: sidechain‐macrocycle‐spacer‐macro‐cycle‐spacer‐macrocycle‐sidechain. The overall extension of the channel system is defined by the lengths of the spacer chains. The flexible sidearms are thought to be aligned with the lipid axis and opposite to the spacer chains. To the extent the spacer chains contribute to organization of the structure and isolation of the cation‐containing pore from the surrounding lipid chains, more hydrophobic chains are expected to enhance cation transport. A comparison of C₁₂H₂₅<N18N>(CH₂)₁₂<N18N>(CH₂)₁₂<N18N> C₁₂H₂₅, 1, with (C₁₂H₂₅)₂N(CH₂)₂<N18N>(CH₂)₁₂<N18N>(CH₂)₁₂<N18N>(CH₂)2N(C₁₂H₂₅)₂, 11, shows that the Na⁺ transport is, indeed, enhanced.     

Determination of naltrexone and 6β-naltrexol in human blood: comparison of high-performance liquid chromatography with spectrophotometric and tandem-mass-spectrometric detection

We present data for a comparison of a liquid-chromatographic method coupled with tandem mass spectrometry (LC-MS/MS) and a high-performance liquid-chromatographic method with column switching and UV spectrophotometric detection. The two methods were developed for determination of naltrexone and 6β-naltrexol in blood serum or plasma aiming to be used for therapeutic drug monitoring to guide the treatment of patients with naltrexone. For the high-performance liquid chromatography (HPLC)/UV detection, online sample cleanup was conducted on Perfect Bond C₁₈ material with 2% (vol/vol) acetonitrile in deionized water. Drugs were separated on a C₁₈ column using 11.5% (vol/vol) acetonitrile and 0.4% (vol/vol) N,N,N,N-tetramethylethylenediamine within 20 min. LC-MS/MS used naltrexone-d ₃ and 6β-naltrexol-d ₄ as internal standards. After protein precipitation, the chromatographic separation was performed on a C₁₈ column by applying a methanol gradient (5–100%, vol/vol) with 0.1% formic acid over 9.5 min. The HPLC/UV method was found to be linear for concentrations ranging from 2 to 100 ng/ml, with a regression correlation coefficient of r ²?>?0.998 for naltrexone and 6β-naltrexol. The limit of quantification was 2 ng/ml for naltrexone and 6β-naltrexol. For the LC-MS/MS method the calibration curves were linear (r²?>?0.999) from 0.5 to 200 ng/ml for both substances, and the limit of quantification was 0.5 ng/ml. The concentrations measured by the two methods correlated significantly for both substances (r²?>?0.967; p?<?0.001). Both methods could be used for therapeutic drug monitoring. The HPLC/UV method was advantageous regarding automatization and costs, whereas LC-MS/MS was superior with regard to sensitivity.     

Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.     

New alkylated and perfluoroalkylated phosphonic acids: Synthesis, adhesive and water-repellent properties on aluminum substrates

This paper describes the synthesis of phosphonic acids (R-S-(CH₂)₂-PO(OH)₂) containing a perfluoroalkylated chain (R = C₆F₁₃-(CH₂)₂, C₈F₁₇-(CH₂)₂) or an alkyl group (R = C₁₂H₂₅, C₁₈H₃₇). These compounds, obtained in excellent yield by telomerization of vinyl phosphonic acid in the presence of alkylated or perfluorinated mercaptans used as transfer agents, were characterized by ¹H, ¹⁹F and ³¹P nuclear magnetic resonance. Thermal characterization by differential scanning calorimetry (DSC) showed the presence of mesophases for compounds containing C₈F₁₇ and C₁₈H₃₇ end groups. A lamellar structure with a layered or bilayered organization was identified by small angle X-ray scattering (SAXS). Adhesion of these compounds on aluminum surfaces is improved by the presence of phosphonic groups. Hydrophobic properties of coated aluminum surfaces are enhanced by fluorinated groups.     

Comparison of the Separation Characteristics of the Organic–Inorganic Hybrid Octadecyl Stationary Phases XTerra MS C18 and XBridge C18 and Shield RP18 in RPLC

Differences in the system constants of the solvation parameter model, discontinuities in retention factor plots (log k against volume fraction of organic solvent) and retention factor correlation plots are used to study the retention mechanism on XTerra MS C₁₈, XBridge C₁₈ and XBridge Shield RP₁₈ stationary phases with acetonitrile–water and methanol–water mobile phases containing from 10 to 70% (v/v) organic solvent. Wetting of XBridge C₁₈ at 10 and 20% (v/v) acetonitrile is incomplete and is responsible for small changes in the retention mechanism. The intermolecular interactions responsible for retention on XTerra MS C₁₈ and XBridge C₁₈ are similar with minor differences in cavity formation and hydrogen-bonding interactions responsible for small selectivity differences. On the other hand, for bulky solutes there are large changes in retention at low volume fractions of organic solvent (<40% v/v) associated with steric repulsion on the XTerra MS C₁₈ stationary phases that is absent for XBridge C₁₈. Selectivity differences are more apparent for XBridge C₁₈ and XBridge Shield RP₁₈. For acetonitrile-water mobile phases cavity formation in the solvated XBridge Shield RP₁₈ is slightly more difficult and hydrogen-bond acid and base interactions are more important than for XBridge C₁₈. With methanol–water mobile phases it becomes slightly easier to form a cavity in the solvated XBridge RP₁₈ compared with XBridge C₁₈. In addition, the methanol-water solvated XBridge RP₁₈ is a stronger hydrogen-bond base and more dipolar/polarizable than XBridge C₁₈. These variations in selectivity justify the use of XBridge C₁₈ and XBridge Shield RP₁₈ as complementary stationary phases for method development.     

Development and optimization of a method for the separation of platycosides in Platycodi Radix by comprehensive two-dimensional liquid chromatography with mass spectrometric detection

Comprehensive two-dimensional chromatography (LC × LC) using combinations of two columns (C₁₈ × CN and C₁₈ × NH₂) was employed with electrospray (ESI) mass spectrometry to analyze platycosides from root extract. Based on the capability of the C₁₈, CN and NH₂ columns to separate the platycosides, the orthogonality in two-dimensional space according to each combination of columns was predicted from the correlation coefficients between the retention times of the 17 compounds separated by the independent CN and C₁₈ columns, and NH₂ and C₁₈ columns. The expected distribution of the peaks was also compared with the two-dimensional plots obtained by practical separation in an LC × LC system. The increased peak capacities using C₁₈ × NH₂ allowed three minor components and five isomers of the platycosides to be newly separated, which were not identified with 1D-LC using the individual C₁₈ column, whereas the combination of C₁₈ × CN did not result in any improvement of the separation performance.     

氢键稳定的苯并菲盘状液晶的合成及介晶性

盘状液晶分子能自组装成高度有序的六方柱状介晶相. 其各向异性的载流子高速迁移率使其成为较理想的有机光电子材料. 采用分子间氢键锚定柱状相, 获得介晶相温度范围宽、有序度高的苯并菲盘状液晶是本研究的目的. 本文通过分子设计, 合成了3个系列, 共18个有两种不同软链的苯并菲盘状液晶化合物C₁₈H₆(OR)₅(OCH₂COOEt), C₁₈H₆(OR)₅(OCH₂COOBu)和C₁₈H₆(OR)₅(OCH₂CONHBu), 其中R＝C_nH_2n＋1, n＝4～9. 化合物的纯度和结构通过¹H NMR和元素分析确证. 化合物热稳定性通过热重分析(TGA)测定, 并显示出较高的热稳定性. 通过偏光显微镜(POM)和差示扫描量热法(DSC)对这些化合物的热致液晶性进行了研究. 结果显示对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OR)₅(OCH₂CONHBu), 与具有同样软链长度的分子中不含酰胺键的化合物系列C₁₈H₆(OR)₅(OCH₂COOBu)相比较, 前者由于柱内分子间氢键的形成, 具有更高的熔点和清亮点.     

Development and Validation of a Stability-Indicating LC Method to Quantify Hydrochlorothiazide in Oral Suspension for Pediatric Use

A stability-indicating reversed-phase high-performance liquid chromatography (LC) method was developed and validated for the determination of hydrochlorothiazide in an oral suspension. Isocratic chromatography was performed on a C₁₈ column with 0.1 M sodium phosphate buffer pH 3.0/acetonitrile (70:30 v/v) as mobile phase, at a flow rate of 1.3 mL min⁻¹, and UV detection at 254 nm. The method was linear (r ² = 0.9998), accurate (mean recovery = 100.3%), and precise (RSD <2%). It was also validated for specificity and robustness. The method was successfully applied for the quality control analysis of a new pharmaceutical formulation of HCTZ for pediatric use.     

Thermokinetic studies of organotin(IV) carboxylates derived from para-methoxyphenylethanoic acid

Thremogravimetric (TG) studies of a new series of organotin(IV) carboxylates of the general formula R_nSnL_4-n (where R = CH₃, C₂H₅, C₄H₉, C₆H₅, C₆H₁₁ and C₈H₁₇, n = 2, 3 and L = para-methoxyphenylethanoate anion) have been carried out. Horowitz and Metzger method has been used to calculate thermokinetic parameters. It has been found that diorganotin dicarboxylates have larger activation energy than those of corresponding triorganotin carboxylates. Furthermore, the activation energy, Gibb’s free energy, entropy and enthalpy of diorganotin compounds shows the following trend, (CH₃)₂SnL₂ < (C₂H₅)₂SnL₂ < (C₄H₉)₂SnL₂ < (C₈H₁₇)₂SnL₂. This is attributed to steady increase in chain length of the alkyl groups. However, triorganotin compounds do not show such behavior.     

Transformations of CO<Subscript>2</Subscript> in Two-Phase Systems C<Subscript>8</Subscript>F<Subscript>18</Subscript>–H<Subscript>2</Subscript>O and C<Subscript>6</Subscript>F<Subscript>6</Subscript>–H<Subscript>2</Subscript>O

The transformation of carbon dioxide in aqueous emulsions of perfluorons in the presence of oxygen in the air results in the formation of a mixture of oxalic acid and a minor set of organic compounds C₄–C₈. The maximum CO₂ consumption occurs in the emulsion with the C₈F₁₈: H₂O vol/vol ratio of 1: 0.42 at pH 2.4; the H₂C₂O₄ yield is 11 mol %.     

Shape- and stereo-selective esterase activities of cross-linked polymers imprinted with a transition-state analogue for the hydrolysis of amino acid esters

Various cross-linked (with N,N′-ethylene (C₂), butylene (C₄), hexamethylene (C₆), or decamethylene (C₁₀)-bisacrylamide) polymer catalysts containing l-histidine and quaternary trimethylammonium groups were imprinted with a racemic transition-state analogue of phenyl 1-benzyloxycarbonyl-3-methylpentylphosphonate for the hydrolysis of p-nitrophenyl N-(benzyloxycarbonyl)-l (or d)-leucinate (Z-l (or d)-Leu-PNP). Among these polymer catalysts, N,N′-C₄-bisacrylamide-cross-linked polymer catalyst, which was copolymerized with styrene monomer, exhibited the notable substrate-stereospecificity for the Z-l-Leu-PNP hydrolysis among the hydrolyses of enantiomeric l (or d)-N-protected (such as tert-butyloxycarbonyl (Boc-), acetyl (C₂-), decanoyl (C₁₀-) or benzyloxycarbonyl (Z-)) amino acid (Leu, Ala, or Phe) p-nitrophenyl esters in 10 vol.% MeCN-Tris buffer (pH 7.15) at 30°C.     

Influence of injection parameters on column performance in nanoscale high-performance liquid chromatography

Summary The influence of the injection volume and the sample solvent on column efficiency has been evaluated in packed nano liquid chromatography using columns 150μ i.d. Evaluation of column performance was by means of reduced plate height (h) versus reduced velocity (v) for four polyaromatic hydrocarbon test compounds (PAHs). When compounds are dissolved in a weak solvent (such as MeCN: H₂O, 30∶70), and whatever the injection volume −60 or 200 nL-a gain in efficiency can be observed due to the well-known on-column focusing phenomenon, but keeping constant solute retention factors. Under optimized conditions (flow rate: 150 nLmin⁻¹, solvent sample MeCN: H₂O, 30∶70, injection volume 200 nL), a reduced plate height of 1.83 has been obtained for a 15 μm C₁₈ packing corresponding to 36000 plates m⁻¹, which illustrates the absence of any extracolumn band broadening under nano LC conditions.     

Analysis of long-chain fatty acids in grey wastewater with in-vial derivatisation

The presence and levels of long-chain fatty acids (C₆–C₂₀) in grey wastewater from bathrooms have been investigated. The acids were purified and concentrated by solid-phase extraction on strong anion exchange discs, in-vial derivatised to their corresponding methyl ester and subsequently analysed by GC-MS. The method was able to quantify the acids at concentration <1?µg/L with a recovery of 31–97%. The levels of fatty acids were found in the range of <0.5 to 27?100?µg/L and the highest levels were found for the saturated lauric (C₁₂), palmitic (C₁₆) and stearic (C₁₈) acids. The treatment efficiency of a local treatment plant was evaluated by comparing concentrations of fatty acids at the inlet and the outlet. It was found that the treatability decreases with increasing chain length for the saturated acids (19–100% degradation) whereas the corresponding mono unsaturated acids were more easily degraded.     

Synthesis and structures of three isoxazole‐containing Schiff bases

The synthesis and structures of three isoxazole‐containing Schiff bases are reported, namely, (E)‐2‐{[(isoxazol‐3‐yl)imino]methyl}phenol, C₁₀H₈N₂O₂, (E)‐2‐{[(5‐methylisoxazol‐3‐yl)imino]methyl}phenol, C₁₁H₁₀N₂O₂, and (E)‐2,4‐di‐tert‐butyl‐6‐{[(isoxazol‐3‐yl)imino]methyl}phenol, C₁₈H₂₄N₂O₂. All three structures contain an intramolecular O—H…N hydrogen bond, alongside weaker intermolecular C—H…N and C—H…O contacts. The C—O(H) and imine C=N bond lengths were consistent with structures existing in the enol rather than the keto form. Despite having dihedral angles <25°, none of the compounds were observed to be strongly thermochromic, unlike their anil counterparts; however, all three compounds showed a visible colour change upon irradiation with UV light.     

分子间氢键对苯并菲柱状介晶性的影响: 量子化学ONIOM (MO/MM)研究

我们最近的实验显示: 对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OC₅H₁₁)₃(OCH₂CONHC₄H₉)₃, 对称化合物有比反对称异构体更高的清亮点和更有序的六方柱状介晶相, 且与具有同样软链长度的分子中不含酰胺基的化合物C₁₈H₆(OC₅H₁₁)₃(OCH₂COOC₄H₉)₃相比较, 有更高的清亮点和更丰富的柱状介晶相. 本文通过量子化学ONIOM (B3LYP/6-31G(d,p):UFF)计算, 说明对于带酰胺基的分子, 对称分子比反对称分子有较大的稳定化能和较高的转动势垒. 对于对称性分子, 带酰胺基的分子比带酯基的分子有较大的稳定化能和较高的转动势垒. 这说明由酰胺基形成的分子间氢键起了稳定液晶相和锚定六方柱状相的作用, 可以解释带酰胺基的分子和对称性分子有较高的清亮点和更有序的六方柱状介晶相. 如果加长酰胺基的软链, 则可使氢键锚定的扭转角减少, 这样有利于提高电荷传输速率.     

Coupled liquid-liquid extraction and column switching LC for the determination of a new antihistaminic H1 drug in human urine

Summary Mizolastine (SL 85.0324) is a new antihistaminic H₁ benzimidazole derivative which is excreted into urine almost completely metabolized; about 2% of the unchanged drug is excreted as conjugated compound which requires enzymatic deconjugation before analysis. Since the existing methods for plasma samples do not work on deconjugated human urine due to interferences, a new method was developed. The method is based on a diethyl-ether extraction of mizolastine and an internal standard from alkalinized urine. The ether extract is back-extracted with an aqueous buffer (pH=2.6), this extract is neutralized (pH=6.5) and an aliquot injected into a C₁₈ pre-column where clean up and preconcentration take place. The analytes are then desorbed from the pre-column and transferred to the analytical column. The analytical column is a C₁₈ type specially seactivated for basic compounds with an eluent of acetonitrile/phosphate solution (pH=4.5), 40/60, v/v, at a flow rate of 1 ml min^–1. Detection is at 285 nm. The method is linear in the range 10–500 ng ml^–1 with a lower limit of detection of 10 ng ml^–1. The precision and accuracy, evaluated during intra-day and inter-day assays, are satisfactory for pharmacokinetic investigations.     

Electron transfer reactions of (C5R5)2(CO)2Ti (R=H or Me) with TCNE or TCNQ: Spectroelectrochemical assignment of metal and ligand oxidation states in [(C5Me5)2(CO)Ti(TCNX)]

The TCNX ligands TCNE (tetracyanoethene) and TCNQ (7,7,8,8-tetracyano-p-quinodimethane) react instantaneously with (C₅R₅)₂(CO)₂Ti, R=H or Me, to yield highly air-sensitive mononuclear complexes (C₅R₅)₂(CO)Ti(TCNX) of which the soluble species (R=Me) were characterized also in the oxidized and reduced forms through cyclic voltammetry, EPR, IR and UV-vis spectroelectrochemistry. While oxidation at rather low potentials yields labile carbonyltitanium(IV) species of the TCNX⁻ ligands, the reduction occurs stepwise at unusually negative potentials, first on the ligand (to yield coordinated TCNX²⁻) and then on the metal (to form Ti^II). For the neutral complexes (C₅R₅)₂(CO)Ti^2+q(TCNX^−q) the results support a rather large amount of charge transfer 1<q<2 from the metal to the acceptors TCNX. Evidence for the previously formulated {(μ-TCNE²⁻)[(C₅H₅)₂Ti^IV(CO)]₂}(TCNE²⁻) could not be found. The complexes (C₅R₅)₂(CO)Ti(TCNE) are compared with related compounds (C₅R₅)₂BrV(TCNE), (C₆R₆)(CO)₂Cr(TCNE) and (C₅R₅)(CO)₂Mn(TCNE).     

Syntheses of polyfluorophenylcobalt(III) schiff base complexes using organothallium reagents

The complexes RCo(acacen) [R = C₆F₅, p-HC₆F₄, or o-HC₆F₄; H₂acacen = N,N′-ethylenebis(acetylacetonimine)] and RCo(salen) [R = C₆F₅ or p-HC₆F₄; H₂salen = N,N′-ethylenebis(salicylaldimine)] have been prepared by reaction between Co(acacen) or Co(salen) and the appropriate bromobis(polyfluorophenyl)thallium(III) compounds, and have been isolated as pyridinates. Spectroscopic evidence for formation of C₆F₅Co(salophen) [H₂salophen = _N,N′-o-phenylenebis(salicylaldimine)] has also been obtained. The reactivity of the thallium compounds increased in the sequence Ph₂TlBr ? (o-HC₆F₄)2TlBr < (p-HC₆F₄)₂TlBr < (C₆F₅)₂TlBr, and of the cobalt complexes in the sequence Co(salophen) < Co(salen) < Co(acacen). Possible mechanisms are discussed.