System Maps for XTerra MS C18: Effect of Solvent Type on Selectivity in Reversed-Phase Liquid Chromatography

The solvation parameter model is used to establish the contribution of cohesion, dipole-type and hydrogen-bonding interactions to the retention mechanism on an XTerra MS C₁₈ stationary phase with acetonitrile-water, methanol-water and tetrahydrofuran-water mobile phases containing from 10 to 70% (v/v) organic solvent. Solute size and electron lone pair interactions are responsible for retention while dipole-type and hydrogen-bonding interactions result in lower retention. The volume fraction of water in the mobile phase plays a dominant role in the retention mechanism. However, the change in values of the system constants of the solvation parameter model cannot be explained entirely by assuming the principle role of the organic solvent is to act as a diluent for the mobile phase. Selective solvation of the stationary phase by the organic solvent and the ability of the organic solvent to extract water into the stationary phase, and/or the absorption of water-organic solvent complexes by the stationary phase, are important in accounting for the details revealed about the retention mechanism by the solvation parameter model. A qualitative picture of the above solvent effects, compatible with current knowledge of solvent and stationary phase properties, is presented.     

Insights into the Retention Mechanisms on Perfluorohexylpropylsiloxane-Bonded (Fluophase-RP) and Octadecylsiloxane-Bonded (Betasil C18) Stationary Phases Based on the Same Silica Substrate in RP-LC

The solvation parameter model is used to elucidate the retention mechanism on a perfluorohexylpropylsiloxane-bonded (Fluophase RP) and octadecylsiloxane-bonded (Betasil C18) stationary phases based on the same silica substrate with acetonitrile–water and methanol–water mobile phase compositions. Dewetting affects the retention properties of Fluophase RP at mobile phase compositions containing less than 20% (v/v) acetonitrile or 40% (v/v) methanol. It results in a loss of retention due to an unfavorable change in the phase ratio as well as changes in specific intermolecular interactions. Steric repulsion reduces retention of bulky solutes on fully solvated Betasil C18 with methanol–water (but not acetonitrile–water) mobile phase compositions but is not important for Fluophase RP. The retention of weak bases is affected by ion-exchange interactions on Fluophase RP with acetonitrile–water, and to a lesser extent, methanol-water mobile phases but these are weak at best for Betasil C18. The system constants of the solvation parameter model and retention factor scatter plots are used to compare selectivity differences for Fluophase RP, Betasil C18 and a perfluorophenylpropylsiloxane-bonded silica stationary phase Discovery HS F5 for conditions where incomplete solvation, steric repulsion and ion-exchange do not significantly contribute to the retention mechanism. Lower retention on Fluophase RP results from weaker dispersion and/or higher cohesion moderated to different extents by polar interactions since solvated Fluophase RP is a stronger hydrogen-bond acid and more dipolar/polarizable than Betasil C18. Retention factors for acetonitrile–water mobile phases are highly correlated for Fluophase RP and Betasil C18 except for compounds with a large excess molar refraction and weak hydrogen-bonding capability. Selectivity differences are more significant for methanol–water mobile phases. Retention factors on Fluophase RP are strongly correlated with those on Discovery HSF5 for acetonitrile–water mobile phases while methanol–water mobile phases retention on Fluophase RP is a poor predictor of the retention order on Discovery HS F5.     

Selectivity differences between sol-gel coated and immobilized liquid film open-tubular columns for gas chromatography

The solvation parameter model is used to determine the system constants for two sol-gel coated open-tubular columns at five equally spaced temperatures in the range 60-140 degrees C. Differences in the system constants as a function of temperature are used to determine the affect of sol-gel structure on the selectivity of SolGel-l and SolGel-Wax columns compared with conventionally coated and immobilized poly(dimethylsiloxane) and poly(ethylene glycol) stationary phases. The sol-gel columns should be suitable for similar separations to those presently performed on conventional immobilized liquid film columns of the same type but selectivity differences for polar compounds, which depend on temperature, should be anticipated.     

Comparison of the Separation Characteristics of the Organic–Inorganic Hybrid Stationary Phases XBridge C8 and Phenyl and XTerra Phenyl in RP-LC

Differences in the system constants of the solvation parameter model and retention factor correlation plots for varied solutes are used to study the retention mechanism on XBridge C₈, XBridge Phenyl and XTerra Phenyl stationary phases with acetonitrile–water and methanol–water mobile phases containing from 10 to 70% (v/v) organic solvent. These stationary phases are compared with XBridge C₁₈ and XBridge Shield RP₁₈ characterized in an earlier report using the same protocol. The XBridge stationary phases are all quite similar in their retention properties with larger difference in absolute retention explained by differences in cohesion and the phase ratio, mainly, and smaller changes in relative retention (selectivity) by the differences in individual system constants and their variation with mobile phase type and composition. None of the XBridge stationary phases are selectivity equivalent but XBridge C₁₈ and XBridge Shield RP₁₈ have similar separation properties, likewise so do XBridge C₈ and XBridge Phenyl, while the differences between the two groups of two stationary phases is greater than the difference within either group. The limited range of changes in selectivity is demonstrated by the high coefficient of determination (>0.98) for plots of the retention factors for varied compounds on the different XBridge phases with the same mobile phase composition.     

Effect of H-atom concentration on soot formation in premixed ethylene/air flames

Soot formation is a major challenge in the development of clean and efficient combustion systems based on hydrocarbon fuels. Fundamental understanding of the reaction mechanism leading to soot formation can be obtained by investigating the role of key reactive species such as atomic hydrogen taking part in soot formation pathways. In this study, two-dimensional laser induced incandescence (LII) measurements using λ?=?1064?nm laser have been used to measure soot volume fraction (f_V) in a series of rich ethylene (C₂H₄)/air flames, stabilized over a McKenna burner fitted with a flame stabilizing metal disc. Moreover, a comparison of UV (λ?=?283?nm), visible (λ?=?532?nm) and IR (λ?=?1064?nm) laser excited LII measurements of soot is discussed. Recently developed, femtosecond two-photon laser-induced fluorescence (fs-TPLIF) technique has been applied for obtaining spatially resolved H-atom concentration ([H]) profiles under the same flame conditions. The structure of the flames has also been determined using hydroxyl radical (OH) planar laser induced fluorescence (PLIF) imaging. The results indicate an inverse dependence of f_V on [H] for a range of C₂H₄/air rich flames up to an equivalence ratio, Φ?=?3.0. Although an absolute relationship between [H] and f_V cannot be easily derived owing to the multiple steps involving H and other intermediate species in soot formation pathways, the present study demonstrates the feasibility to couple [H] and f_V obtained using advanced optical techniques for soot formation studies.     

Evaluation of the separation characteristics of application-specific (pesticides and dioxins) open-tubular columns for gas chromatography

The solvation parameter model is used to characterize the retention properties of four application-specific open-tubular columns (Rtx-CLPesticides, Rtx-OPPesticides, Rtx-Dioxin and Rtx-Dioxin2) at five equally spaced temperatures over the range 60-140 degrees C. Cluster analysis is used to compare the system constants to a database of forty open-tubular columns characterized according to the same method. System constants differences and retention factor correlation plots are then used to determine selectivity differences between the application-specific columns and their nearest neighbors identified by cluster analysis. The Rtx-CLPesticides and Rtx-OPPesticides columns are shown to belong to the selectivity group containing poly(dimethylmethyltrifluoroprpylsiloxane) stationary phases with Rtx-OPPesticides having a similar selectivity to a poly(dimethylmethyltrifluoropropylsiloxane) stationary phase containing 20% methyltrifluoropropylsiloxane monomer (DB-200) and Rtx-CLPesticides separation properties for a stationary phase containing less than 20% methyltrifluoropropylsiloxane monomer. The Rtx-Dioxin and Rtx-Dioxin2 columns are located in the selectivity group dominated by the poly(dimethyldiphenylsiloxane) stationary phases containing less than 20% diphenylsiloxane monomer. The Rtx-Dioxin and Rtx-Dioxin2 columns are shown to be selectivity equivalent to a (5% phenyl) carborane-siloxane copolymer stationary phase (Stx-500) and a second generation silarylene-siloxane copolymer stationary phase containing dimethylsiloxane and diphenylsiloxane monomers (DB-XLB), respectively.     

Femtosecond two-photon LIF imaging of atomic species using a frequency-quadrupled Ti:sapphire laser

Femtosecond (fs)-duration laser pulses are well suited for two-photon laser-induced-fluorescence (TPLIF) imaging of key atomic species such as H, N, and O in gas-phase reacting flows. Ultrashort pulses enable efficient nonlinear excitation, while reducing interfering photochemical processes. Furthermore, amplified fs lasers enable high-repetition-rate imaging (typically 1–10 kHz) for capturing the dynamics of turbulent flow fields. However, two-dimensional (2D), single-laser-shot fs-TPLIF imaging of the above species is challenging in most practical flow fields because of the limited ultraviolet pulse energy available in commercial optical parametric amplifier (OPA)-based tunable laser sources. In this work, we report the development of an efficient, fs frequency-quadrupling unit [i.e., fourth-harmonic generator (FHG)] with overall conversion efficiency more than six times greater than that of commercial OPA-based systems. The development, characterization, and application of the fs-FHG system for 2D imaging of H atoms in flames are described in detail. The potential application of the same laser system for 2D imaging of N and O atoms is also discussed.     

Investigation of optical fibers for coherent anti-Stokes Raman scattering (CARS) spectroscopy in reacting flows

The objective of this work is to investigate the feasibility of intense laser-beam propagation through optical fibers for temperature and species concentration measurements in gas-phase reacting flows using coherent anti-Stokes Raman scattering (CARS) spectroscopy. In particular, damage thresholds of fibers, nonlinear effects during beam propagation, and beam quality at the output of the fibers are studied for the propagation of nanosecond (ns) and picosecond (ps) laser beams. It is observed that ps pulses are better suited for fiber-based nonlinear optical spectroscopic techniques, which generally depend on laser irradiance rather than fluence. A ps fiber-coupled CARS system using multimode step-index fibers is developed. Temperature measurements using this system are demonstrated in an atmospheric pressure, near-adiabatic laboratory flame. Proof-of-concept measurements show significant promise for fiber-based CARS spectroscopy in harsh combustion environments. Furthermore, since ps-CARS spectroscopy allows the suppression of non-resonant background, this technique could be utilized for improving the sensitivity and accuracy of CARS thermometry in high-pressure hydrocarbon-fueled combustors.