基于HPMCP包覆介孔SBA-15的pH敏感药物缓释系统

以肠溶性包衣材料羟丙甲纤维素邻苯二甲酸酯(HPMCP)为原料,在负载法莫替丁(Famo)的SBA-15药片表面包覆聚合物膜,成功制备了一种新型的pH敏感药物缓释系统, 并考察了此缓释系统在不同pH释放环境中的释放行为. 结果表明: 在模拟胃液中(SGF, pH=1.2),HPMCP能致密包覆在药片表面,从而明显延缓Famo的释放速度;而在模拟肠液中(SIF, pH=7.5),HPMCP能够迅速溶于缓释溶液中,因而对Famo释放速度的影响甚微. 因此,可以将这种新型智能药物缓释系统应用于肠道靶向给药.     

5-氟尿嘧啶在pH敏感型分子筛控释载体中的缓释行为

以肠溶性的羟丙基甲基纤维素邻苯二甲酸酯(HPMCP)作为包覆材料,制备了HPMCP包覆的SBA-15介孔分子筛药物控释载体(HPMCP/SBA-15),并考察了抗癌药物5-氟尿嘧啶(5-Fu)负载于控释载体后,在不同pH释放环境中的释放行为.结果表明,在模拟胃液中(pH=1.2),HPMCP能明显地延缓5-Fu的释放速度;药物释放4h后,其释放率仅为15%.而在模拟肠液中(pH=7.5)HPMCP迅速溶解,对5-Fu释放速度的影响甚微;药物释放4h后,释放率可达到80%.与此同时,包覆膜的干燥温度影响5-Fu的释放行为,干燥温度越高,药物在模拟胃液中的释放速度越慢.     

Kinetic adsorption of drugs using carbon nanofibers in simulated gastric and intestinal fluids

Two different classes of drugs were selected to test the adsorption capacity of carbon nanofibers as a greener new generation alternative adsorbent in simulated gastric and intestinal fluids. Kinetics of the promethazine and trimethoprim adsorption were analyzed using Lagergren first order and Pseudo second order models. Intraparticle diffusion graphs were also plotted to discuss the adsorption mechanism. Kinetic data showed the significance of boundary layer effect for both of the drugs and the presence of intraparticle diffusion as the other rate controlling step for the promethazine adsorption. Giles isotherms showed the high affinity of drug molecules to the adsorbent. Maximum adsorption capacity of drugs was calculated using Langmuir model as 18.35 and 41.15 mg/g for trimethoprim and 95.24 and 80.65 mg/g for promethazine in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF), respectively. Trimethoprim adsorption was under favor of hydrophobic interaction and π-π dispersion interactions while promethazine adsorption was through cation exchange where the electrostatic attraction is an important force with the contribution of dispersion interactions.     

Controlled drug release studies of atenolol using differently sulfonated acryloxyacetophenone and methyl methacrylate copolymer resins as drug carriers

2-Acryloxyacetophenone(AAP) was prepared and subjected to suspension polymerization with methyl methacrylate(MMA) using azobisisobutyronitrile(AIBN) as free radical initiator.The differently sulfonated AAP-MMA cross-linked copolymer cationic exchange resins were prepared by sulfonation with concentrated sulphuric acid at 70 °C.Several characteristics of the prepared resins were evaluated,i.e.FTIR,the ion-exchange capacity(IEC),thermo gravimetric analysis(TGA),particle size distribution and microscopic morphology.The resin characteristics were altered with degree of sulfonation,providing that differently sulfonated resins could be prepared.The behavior of atenolol(ATL) loading and in vitro release in the USP stimulated gastric and intestinal fluids of the obtained resins were evaluated.The drug loaded in the resin increased with increasing degree of sulfonation and hence the drug binding site in resin employed.The drug release was lower from the resins with higher content of sulfonic group due to the increase in the diffusive path depth.The drug release was a little lower in stimulated gastric fluid(SGF) than in stimulated intestinal fluids(SIF).The basic groups,ionized to a little greater extent in SGF and preferred binding with the resin rather than releasing.Hence,the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

Synthesis and physicochemical characterization of amphiphilic triblock copolymer brush containing pH-sensitive linkage for oral drug delivery

A novel and well-defined pH-sensitive amphiphilic triblock copolymer brush poly(lactide)-b-poly(methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether monomethacrylate) (PLA-b-PMAA-b-PPEGMA) and its self-assembled micelles were developed for oral administration of hydrophobic drugs. The copolymer and its precursors were synthesized by the combination of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and ring-opening polymerization (ROP) techniques. The molecular structures and characteristics were confirmed by GPC, (1)H NMR, and FT-IR. The critical micelle concentration (CMC) values of PLA-b-PMAA-b-PPEGMA in aqueous medium varied from 1.4 to 2.6 mg/L, and the partition equilibrium constant (K(v)) of pyrene in micellar solutions ranged from 2.873 × 10(5) to 3.312 × 10(5). The average sizes of the self-assembled blank and drug-loaded micelles were 140-250 nm determined by DLS in aqueous solution. The morphology of the micelles was found to be spherical by SEM. Nifedipine (NFD), a poorly water-soluble drug, was selected as the model drug and wrapped into the core of micelles via dialysis method. The in vitro release behavior of NFD from the micelles was pH-dependent. In simulated gastric fluid (SGF, pH 1.2), the cumulative release percent of NFD was relative low, while in simulated intestinal fluid (SIF, pH 7.4), more than 96% was released within 24 h. All the results showed that the pH-sensitive PLA-b-PMAA-b-PPEGMA micelle may be a prospective candidate as oral drug delivery carrier for hydrophobic drugs with controlled release behavior.     

Ionic liquid–modified cellulosic hydrogels for loading and sustained release of selenourea: an ensuing inhibition of tyrosinase activity

Cellulose-based hydrogel materials were prepared and modified with tannic acid and l-methionine using ionic liquid as the solvent. The gels were prepared to develop a sustained release medium for selenourea (SeU). The drug delivery characteristics of selenourea-loaded cellulose (CSeU), selenourea-loaded tannic acid-modified cellulose (CTSeU), and selenourea-loaded L-methionine-modified cellulose (CMSeU) were investigated in aqueous media and simulated gastric fluid (SGF) media. This modified gel beads have been characterized using field emission scanning electron microscope, X-ray energy-dispersive spectroscopy, Fourier transform infrared spectroscopy, thermogravimetry–differential thermal analysis and swelling properties and compared with those of the unmodified ones. We also investigated the inhibitory effects of SeU released from these gels on the activity of mushroom tyrosinase. Out of all the gel materials, CTSeU showed maximum SeU release both in water and SGF media. However, tyrosinase inhibitory action in PBS medium was comparable for all the three gel materials.     

Synthesis and Evaluation of Biocompatible pH‐Sensitive Hydrogels as Colon‐Specific Drug Delivery Systems

Because of the growing importance of pH‐sensitive hydrogels as drug delivery systems, biocompatible copolymeric hydrogels based N‐vinyl‐2‐pyrrolidinone (NVP) and methacrylic acid (MAA) were designed and synthesized. These hydrogels were investigated for oral drug delivery. Radical copolymerizations of N‐vinyl‐2‐pyrrolidinone (NVP) and methacrylic acid (MAA) with the various ratios of cross‐linking agent were carried out at 70 °C. Azabisisobutyronitrile (AIBN) was the free‐radical initiator employed and Cubane‐1,4‐dicarboxylic acid (CDA) linked to two 2‐hydroxyethyl methacrylate (HEMA) group was the crosslinking agent (CA) used for hydrogel preparations. The hydrogels were characterized by differential scanning calorimetry and FT‐IR. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). A model drug, olsalazine [3,3′‐azobis (6‐hydroxy benzoic acid)] (OSZ) as an azo derivative of 5‐aminosalicylic acid (5‐ASA), was entrapped in these gels and the in‐vitro release profiles were established separately in both enzyme‐free SGF and SIF. The drug‐release profiles indicated that the amount of drug released depended on the degree of swelling. The swelling was modulated by the amount of crosslinking of the polymer bonded drug (PBDs) prepared. Based on the great difference in hydrolysis rates at pH 1 and 7.4, these pH‐sensitive hydrogels appear to be good candidates for colon‐specific drug delivery.     

Synthesis and characterization of poly(methacrylic acid) hydrogels for metoclopramide delivery

Polymeric hydrogels based on biocompatible materials, methacrylic acid (MAA), were designed and synthesized. Synthesis was carried out by free-radical copolymerization using potassium persulfate as initiator and N,N^′-methylenebisacrylamide as crosslinker. Hydrogels were also characterized by Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR) and differential scanning calorimetry (DSC). DSC was used for the quantitive determination of the amounts of freezing and non-freezing water of the hydrogels with 0.5% of N,N^′-methylenebisacrylamide. Equilibrium swelling of hydrogels was studied in phosphate buffer of physiological pH (1.0, 4.0, 7.4 and 8.5) at 37 °C. The swelling kinetic of the hydrogels were studied and the kinetic characteristic constant of copolymeric systems, k, and the exponent which characterizes the mechanism of water transport at short times, n, were obtained. Metoclopramide hydrochloride was entrapped into the hydrogels by sorption and the “in vitro” release profile of this drug was established in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). It was observed that the drug release mechanism was non-Fickian.     

pH-sensitive polyelectrolyte complex gel microspheres composed of chitosan/sodium tripolyphosphate/dextran sulfate: swelling kinetics and drug delivery properties

Porous chitosan (CS) polyelectrolyte complex (PEC) hydrogel microspheres were prepared via either wet phase-inversion or ionotropic crosslinking with sodium tripolyphosphate (Na+ - TPP) and dextran sulfate (DS). The resulting microspheres were characterized using scanning electron microscopy (SEM) and elemental analysis (EA). The controlled release behavior of ibuprofen (IBU) from these microspheres was investigated. The PEC microspheres were about 700-950 microm in diameter with large pores and open porous structure. The CS/TPP/DS microspheres resisted hydrolysis in strong acid and biodegradation in enzymatic surroundings. The swelling kinetics for CS microspheres was close to Fickian diffusion, whereas those for CS/TPP and CS/TPP/DS were non-Fickian. Furthermore, the equilibrium water content (EWC) and water diffusion coefficient (D) increased with the pH of the media. The release profiles of IBU from CS/TPP/DS microspheres were slow in simulated gastric fluid (SGF, pH 1.4) over 3 h, but nearly all of the initial drug content was released in simulated intestinal fluid (SIF, pH 6.8) within 6 h after changing media. Overall the results demonstrated that CS/TPP/DS microspheres could successfully deliver a hydrophobic drug to the intestine without losing the drug in the stomach, and hence could be potential candidates as an orally administered drug delivery system.     

New pH-Sensitive Hydrogels for Oral Delivery of Hydrophobic Drugs

A series of acrylic copolymers containing silyl pendant groups was prepared by free radical cross-linking copolymerization. Me₃Si, Et₃Si, and Ph₃Si together with cubane-1,4-dicarboxylic acid (CDA) were covalently linked with 2-hydroxyethyl methacrylate (HEMA). CDA linked to two HEMA group is the cross-linking agent (CA). Free radical cross-linking copolymerization of the methacrylic acid (MAA) and organosilyl monomers with two different molar ratios of CA was carried out at 60–70°C. The compositions of the cross-linked three-dimensional polymers were determined by FT-IR spectroscopy. The glass transition temperature of the network polymers was determined calorimetrically. Equilibrium swelling studies were carried out in enzyme-free simulated gastric and intestinal fluids (SGF and SIF, respectively). A model hydrophobic drug, the steroid hormone estradiol, was entrapped in these gels, and the in vitro release profiles were established separately in both SGF (pH 1) and SIF (pH 7.4). Incorporation of silyl groups in a new macromolecule system modified network polymers for drug delivery.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

Stability-indicating micellar liquid chromatography method for three novel derivatives of zidovudine in aqueous and simulated gastric and intestinal fluids matrices

This work studies the stability of three new anti-HIV agents which were obtained by the association of zidovudine (AZT) with different amino acids, such as leucine (AZT-Leu) and valine (AZT-Val), and one with an acid group (AZT-Ac). Before commercialisation, their stability in different matrices - simulated gastric fluid (SGF, pH 1.2) and simulated intestinal fluid (SIF, pH 6.8), both as the USP 32 Guideline indicates, and buffers (pH 1.2 and 6.8) - must be studied. To this end, a new stability-indicating micellar liquid chromatography (MLC) method has been optimised and validated. Measurements were based on the disappearance of reagents and the appearance of the only degradation product (AZT). This optimised and validated method used a C18 column and a mobile phase containing 0.05 M sodium dodecyl sulphate-1% (v/v)1-butanol-0.01 M NaH(2)PO(4) (pH 3.0) at 30°C, and a flow rate of 1 mL min(-1). Under these conditions, retention times were 1.4, 3.6, 6.3 and 9.5 min for AZT-Ac, AZT, AZT-Val and AZT-Leu, respectively. Calibrations better than 0.9995, intra- and inter-day precisions below 1.08% and good recoveries (94.47-116.52%) and robustness (RSD less that 1.08%) were obtained and were adequate to analyse the four compounds. Finally, this MLC method was applied to achieve stability studies which resulted in the evidence that all the compounds followed a pseudo-first-order kinetics, and in the determination of their kinetic constants and half-life time. A reference method, applied in the same studies, validated the MLC method reported herein.     

Synthesis and Characterization of Poly[N-Vinyl-2-Pyrrolidone-Polyethylene Glycol Diacrylate] Copolymeric Hydrogels for Drug Delivery

Abstract

Novel polymeric biodegradable and biocompatible copolymeric hydrogels based on N-vinyl-2-pyrrolidone (NVP) and polyethylene glycol diacrylate (PAC) were designed and synthesized. PAC macromonomer was synthesized by a modified procedure and characterized. Poly[N-vinyl-2-pyrrolidone-polyethylene glycol diacrylate] (Poly[NVP-PAC]) hydrogels were synthesized by varying the concentration of PAC. Azobisisobutyronitrile (AIBN) was used as the free radical initiator and N,N¹-methylene bis(acryl-amide) (BIS) was employed as the crosslinking agent. These hydrogels were characterized by various spectroscopic techniques. Fourier transform-infrared spectroscopy (FT-IR) confirms the formation of copolymer. Thermogravimetric analysis (TGA) curves obtained were continuous indicating the formation of copolymer. The glass transition temperature (T_g) of the copolymer was measured using differential scanning calorimetry (DSC). The equilibrium swelling measurements were carried out in simulated gastric and intestinal fluids (SGF & SIF). These swelling studies indicated that these gels had a higher sorption capacity in SIF when compared to that in SGF. 5-Fuorouracil (5-FU), an anti-cancer drug was entrapped in these hydrogels and the in-vitro release profiles were established in a sequential manner in SGF and SIF. About 50–56% of the drug entrapped was released in a period of 10 days.     

Immobilization and sustained release of cefalexin on MCF nano-mesoporous material

Abstract

Mesocellular foams (MCF) silica nanometer mesoporous molecular sieve was successfully synthesized by hydrothermal route. This method used poly(ethylene glycol)-block-poly(propyl glycol)-block-poly(ethylene glycol) as template, tetraethyl orthosilicate as silica source and 1, 3, 5-trimethylbenzene as pore-expanding agent to prepare nano mesoporous MCF in acidic medium. The MCF mesoporous material was characterized by powder X-ray diffraction (XRD), infrared (IR) spectroscopy, low temperature nitrogen adsorption-desorption at 77?K, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The effects of pH, temperature, adsorbent dosage, cefalexin dosage and contact time on the immobilization of cefalexin were studied. Under the optimized conditions, MCF has the best effect on the drug immobilization. The maximum immobilization amount of cefalexin in MCF nano-mesoporous material is 498.8?mg/g. The behavior of adsorption of cefalexin by MCF belongs to multilayer heterogeneous adsorption, which accords with the Freundlich adsorption isotherm. In the adsorption process, all the ΔH⁰, ΔS⁰ and Gibbs free energy change ΔG⁰ are less than zero, indicating that the adsorption process is spontaneous, exothermic entropy decreasing reaction at ordinary temperature. Kinetic investigation showed that the adsorption process of cefalexin on MCF belongs to the pseudo-second-order kinetic process. The release laws of composite material cephalexin-MCF in the simulated body fluid, gastric and intestinal fluid were investigated, respectively. The maximum cumulative release rate in simulated body fluid was 99.4% at 18?h. The maximum cumulative release rate in the simulated gastric juice was 48.7% at 6?h and in the simulated intestinal fluid the maximum cumulative release rate of 61.9% was achieved at 8?h. These release processes satisfy the zero-order ordered kinetic process.     

磁性微胶囊的制备及其药物缓控释性能

用乳液-凝胶法制备了磁性壳聚糖/海藻酸钠微胶囊. 在壳聚糖/海藻酸钠微胶囊中掺入Fe3O4磁性中空球, 使微胶囊具有磁靶向性能. 以头孢拉定作为模型药物研究了载药磁性微胶囊的载药量、包封率及药物缓控释性能等. 结果表明, 提高头孢拉定的初始浓度可以提高载药量, 却不利于提高药物的包封率. 所制备的微胶囊在各种缓冲溶液中长时间内具有显著的缓释效果, 并具有pH 刺激响应释放的性能, 即在模拟胃液中的药物释放率大大降低, 而在模拟体液和肠液中的释放时间大大延长, 可达50 h以上. 另外, 在外加磁场作用下, 微胶囊表现出良好的磁定向运动性能, 为磁靶向药物输送提供基础.     

Characteristics and antioxidant activity of catechin-loaded calcium pectinate gel beads prepared by internal gelation

Catechin-loaded calcium pectinate gel beads prepared by internal gelation were characterized for their catechin entrapment efficiency and release behavior. The entrapment efficiency was higher when the beads were prepared with a lower catechin-to-pectin ratio, shorter gelling time, higher pectin concentration, and lower acetic acid concentration. The entrapment efficiency was much higher under all tested conditions, when the beads were prepared by internal gelation instead of external gelation. The catechin release was slower for the beads prepared with lower catechin-to-pectin ratio, longer gelling time, and higher concentrations of pectin and acetic acid in both simulated gastric and intestinal fluids. Antioxidant power of catechin was effectively maintained in alkaline simulated intestinal fluid when catechin was entrapped within the beads, compared to cases where it was not entrapped, indicating that the beads can protect catechin molecules from the alkaline environment and release them in a sustained fashion.     

聚L-谷氨酸担载胰岛素口服微球的制备与评价

以聚L-谷氨酸为载体材料, 采用无水乳液法制备了口服胰岛素微球, 微球直径在5~20 μm, 载药质量分数为5%~9%. 载药微球具有良好的pH敏感释放行为, 在胃模拟液中2 h释放量约为5%, 在肠道模拟液中2 h释放90%以上. 考察聚合物分子量、溶液浓度、理论投药量及混合材料对微球释放行为的影响.     

Formulation of pH-sensitive aminated chitosan–gelatin crosslinked hydrogel for oral drug delivery

The objective of this study is to develop efficient pH-sensitive hydrogel based on aminated chitosan (AmCs) and gelatin (Gel) biopolymers for oral drug delivery. Herein, AmCs was chemically crosslinked with gelatin (Gel) biopolymer with different ratios, while their structures, thermal profiles and morphological properties were investigated by FTIR, TGA and SEM characterization tools, respectively. Moreover, gel-content, crosslinking density and rheological analysis were also performed. The results clarified that the developed AmCs-Gel crosslinked hydrogel displayed variable pH-sensitive swelling profiles. By increasing AmCs ratio, the swelling ratio was boosted at pH 1.2 and declined at pH 7.4. Besides, by increasing gelatin ratio in the hydrogel matrix, the loading efficiency of Oseltamivir phosphate (as a model of drug) was augmented and reached maximum value of 79.0% by AmCs-Gel (2:3) crosslinked hydrogel. The in vitro drug release profiles were investigated for 6 h in simulated gastric fluid [SGF; pH 1.2] and simulated colon fluid [SCF; pH 7.4]. Variable release profiles were realized depending on variation of AmCs and Gel ratios in the crosslinked hydrogel matrix. Finally, the formulated smart crosslinked AmCs-Gel hydrogels demonstrated acceptable biodegradability with no cellular toxicity, suggesting their applicability as pH-sensitive oral drug carriers.     

Acyclovir-Loaded Chitosan Microspheres for Gastroretention: Development and Evaluation

Mucoadhesive chitosan microspheres of acyclovir were prepared to prolong the gastric residence time using simple emulsification phase separation technique. The particle morphology of drug-loaded formulations was measured by SEM and the particle size distribution was determined using an optical microscope. The release profile of acyclovir from microspheres was examined in simulated gastric fluid (SGF pH 1.2). The particles were found to be discreet and spherical with the maximum particles of an average size (31.62 ± 4.64). The entrapment efficiency was found to be in the range of 40.24 to 67.29%. The concentration of the glutaraldehyde (25%v/v) as a cross-linker 2 ml and drug polymer ratio of 1:2 caused an increase in the entrapment efficiency and the extent of drug release. The optimized chitosan microspheres were found to possess good bioadhesion (79.89 ± 1.01%). The gamma-scintigraphy study showed the gastric residence time of more than 6 hours which revealed that optimized formulation could be a good choice for gastroretentive systems.     

Dynamic Release of Riboflavin from Ethyl Cellulose Coated Barium Alginate Beads for Gastrointestinal Drug Delivery: An in vitro Study

The present work describes the dynamic release of model drug riboflavin form uncoated and ethyl cellulose coated barium alginate beads in the media of continuous varying pH at the physiological temperature 37°C. The drug release behavior has been studied in the simulating gastric fluid (SGF, pH 1.2) for 0–2 h and then in the simulating intestinal fluid (SIF pH 6.8) for 2–48 h. In addition to the traditional dissolution test (TDT, the dynamic release has also been studied by a newly developed method, called ‘flow through diffusion cell’ (FTDC). The release profiles, obtained by using these two methods have been found to differ appreciably from each other. Moreover, the nature of the solid mass surrounding the beads in the FTDC method also influences the release behavior of beads. The uncoated beads demonstrated faster drug release of drug in the medium of lower pH (i.e., 1.2) as compared to that in the medium of pH 6.8 and the release process was found to be diffusion controlled.     

The drug release profile from calcium-induced alginate gel beads coated with an alginate hydrolysate

Calcium-induced alginate gel bead (Alg-Ca) coated with an alginate hydrolysate (Alg), e.g. the guluronic acid block (GB) was prepared and the model drug, hydrocortisone release profiles were investigated under simulated gastrointestinal conditions. Their molecular weights were one sixth or one tenth that of Alg and the diffraction patterns of the hydrolysates resembled that of Alg. The drug release rate from Alg-Ca coated with GB apparently lowered than that of Alg-Ca (coating-free) in the gastric juice (pH1.2). And the coating did not resist the disintegration of Alg-Ca in the intestinal juice (pH 6.8) and the gel erosion accelerated the drug release. On the other hand, for the coated Alg-Ca containing chitosan, the drug release showed zero-order kinetics without rapid erosion of Alg-Ca. The drug release rate from Alg-Ca was able to be controlled by the coating and modifying the composition of the gel matrix.