吸附剂负载TiO2光催化研究进展

TiO2光催化在废水处理、空气净化等环保领域展示出诱人前景.纳米TiO2光催化剂的负载化是实现其产业化的关键步骤之一.多孔吸附剂与纳米TiO2复合可提供对污染物的高浓度吸附环境,提高TiO2分散度,解决催化剂分离难题,是光催化领域的研究热点之一.本文对近年来国内外多孔吸附剂与纳米TiO2复合的发展情况进行了综述,着重介绍了负载型TiO2光催化剂的固定化方法、多孔吸附剂类型以及负载对光催化活性的影响机理.     

负载型混晶纳米TiO_2/硅藻土复合材料的制备及其光催化性能

选用市售硅藻土作为载体,采用液相沉积法制备了负载型混晶纳米TiO2/硅藻土复合材料;采用扫描电镜、X射线衍射仪及红外光谱仪分析了复合材料的表面形貌和晶体结构;基于甲醛光催化降解实验考察了不同组成的负载型TiO2/硅藻土复合材料的光催化性能.结果表明,TiO2负载量为33.3%(TiO2与硅藻土的质量比为1∶2)的复合材料对甲醛光催化降解具有最佳催化活性.     

超声-tio2光催化协同降解聚乙烯醇

聚乙烯醇;超声光催化;纳米锐钛矿型tio2     

活性炭负载Cu离子掺杂纳米TiO2颗粒的制备及光催化性能

采用溶胶-凝胶法在活性炭(AC)表面负载掺杂Cu离子的TiO2纳米颗粒, 制备负载型掺杂Cu2+-TiO2/AC复合光催化剂, 采用XRD, ESR, FS, UV-Vis和BET等手段对其进行了表征, 通过罗丹明B的光催化降解试验, 分析活性炭载体的比表面积和Cu离子掺杂量对负载型掺杂催化剂光催化活性的影响. 结果表明, Cu以+2价存在, Ti以少量的+3价存在; TiO2纳米颗粒具有量子尺寸效应, 吸光阈值显著蓝移, 并使光谱相应范围向可见光区拓展; 另外, 适量Cu离子的掺杂降低了负载型TiO2/AC的荧光强度. 负载和高温处理没有改变活性炭载体的微观结构. 以AC3为载体和质量分数为3%的Cu离子掺杂所制备的3%Cu2+-TiO2/AC3催化剂的活性最高, 并且该催化剂便于回收, 在重复使用中也表现出很高的光催化活性.     

以偏钛酸为原料制备高效负载型纳米TiO2/活性炭光催化剂

以颗粒活性炭(AC)为载体, 偏钛酸为钛源, 采用浸渍-水热法制备负载型TiO2光催化剂, 在300～800 ℃下热解处理. 利用X射线衍射、扫描电镜、拉曼光谱和氮气吸附对催化剂样品进行了表征. 以甲基橙(MO)降解为模型反应, 对负载型TiO2光催化性能进行评价. 结果表明, 经600 ℃焙烧的样品具有最佳光催化性能, 为锐钛矿晶型, 负载于活性炭上的TiO2是由30～50 nm的球型颗粒组成. 负载型TiO2/AC光催化剂的光催化活性高于相同方法制备TiO2和AC混合物及商业化产品Degussa P25与活性炭混合物, 光降解反应符合一级反应动力学方程. 催化剂重复使用5次其光催化活性基本保持不变.     

碳包覆Pd/TiO2光催化产氢协同胺类选择性氧化合成亚胺(英文)

负载型金属纳米催化剂由于其优异的光催化性能,被广泛应用于光催化产氢协同胺类氧化偶联合成高附加值亚胺体系。但在反应过程中,金属表面对H原子和亚胺表现出较强的吸附能力,导致了亚胺易于发生自氢化反应而生成仲胺,显著降低了亚胺的选择性。在本文中,我们证实了在Pd/Ti O₂表面构建超薄碳层(Pd/Ti O₂@C)是一种解决上述问题的有效策略。在Pd/Ti O₂表面构筑的超薄碳层可以有效调控H原子和亚胺在其表面的吸附行为,避免了光催化氧化偶联过程中亚胺的自氢化。因此,Pd/Ti O₂@C光催化剂在光催化产氢协同胺类选择性氧化合成亚胺体系中展现出优异的亚胺选择性。本研究提供了一种便捷有效的策略推动负载型金属纳米催化剂在光催化产氢协同合成高附加值产物体系中的应用。     

贵金属负载的棒状ZnO复合光催化剂的制备及其提升的光催化性能

以水热制备的ZnO纳米棒为基底,通过乙二醇液相还原法负载不同贵金属颗粒(Pt、Pd、Ru)构筑贵金属负载的ZnO纳米棒复合光催化剂。实验结果表明在制备条件相同时,Pt/ZnO样品中Pt颗粒尺寸较小,分布均匀;Pd/ZnO样品中Pd颗粒尺寸较大且团聚严重;Ru/ZnO样品则几乎没有Ru颗粒负载。在紫外光照射下降解亚甲基蓝的反应中,Pt/ZnO表现出最高的光催化性能,Pd/ZnO样品次之,而Ru/ZnO则表现出与ZnO纳米棒相似的光催化活性;表明小尺寸和大小均匀的贵金属颗粒对ZnO纳米棒的催化性能有着显著的提升作用。对Pt/ZnO来说,当Pt载量为3.2%时Pt/ZnO催化剂的光催化活性最高。     

低温静电自组装法制备贵金属修饰TiO_2纳米结构薄膜及其增强的光催化性能(英文)

以碱-水热法在金属Ti片上原位生长了TiO2纳米结构(纳米花和纳米线)薄膜,并采用低温静电自组装方法将超细贵金属(金、铂、钯)纳米颗粒均匀沉积于多孔TiO2薄膜上.负载于Ti片上的贵金属/TiO2纳米结构薄膜具有一体化结构、多孔架构和高光催化活性.超高分辨率场发射扫描电子显微镜(FESEM)直接观察表明贵金属纳米颗粒在TiO2表面分布均匀,且颗粒之间相互分离,金、铂、钯纳米颗粒的平均粒径分别约为4.0、2.0和10.0nm.俄歇电子能谱(AES)纵深成分分析表明贵金属不仅沉积于薄膜表面,且大量分布于TiO2纳米结构薄膜内部,其深度超过580 nm.X射线光电子能谱(XPS)分析表明,经300°C下在空气中热处理后,纳米金仍保持金属态,纳米铂部分被氧化成PtOabs,而钯粒子则完全被氧化成氧化钯(PdO).以低温静电自组装法沉积贵金属,贵金属负载量可通过调节组装时间与溶胶pH值来控制.光催化降解甲基橙的结果表明,沉积的纳米金和铂能显著增加TiO2纳米结构薄膜的光催化活性,说明金和铂粒子可促进光生载流子的分离;但负载的PdO对TiO2薄膜的光催化性能增强几乎无作用.     

双金属核壳结构负载型Au@Ag/TiO2催化剂的制备及表征

利用溶胶法制备了Au核Ag壳(Au@Ag)结构复合纳米粒子,用粉末-溶胶法和水热合成法使其负载于TiO₂纳米粒子上,利用紫外-可见吸收光谱﹑X射线粉末衍射﹑透射电子显微镜对复合结构材料进行了结构表征,并对其光催化消除臭氧的性能进行了研究。结果表明,制备方法、Au/Ag化学计量比及金属负载量等对光催化消除臭氧的活性均有很大影响。采用粉末-溶胶法制备的1%-Au@Ag/TiO₂(n_Au/n_Ag=1∶3)催化剂,由于TiO₂表面沉积的Au@Ag金属颗粒尺寸小且分散度高,而且1%的金属担载量有利于光生电子空穴的有效分离,光催化消除臭氧的活性最高。     

5A分子筛负载纳米镍铈粒子在气相苯加氢反应中的催化活性

将纳米镍铈粒子负载到５Ａ分子筛上制成负载型催化剂，用气相苯加氢反应考察其催化活性，并通过ＳＥＭ和ＸＲＤ技术检测反应前后催化剂上纳米金属粒子的分散及晶相变化情况。与非负载型纳米镍铈粒子催化剂进行比较，结果显示二者的催化活性与纳米镍铈粒子的储氢特性及表面层中铈镍合金的存在有关。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.