5-Br-PADCAP分光光度法测定血清锌

为建立快速、简便、灵敏的分光光度法测定血清锌 ,在表面活性剂TritonX -1 0 0存在下 ,用 2 -(5 -溴 -2 -吡啶偶氮 ) -5 -[N ,N -二羧基甲基 ]苯酚 (5 -Br-PADCAP)作显色剂 ,不去蛋白分光光度法测定血清锌。结果表明 ,锌络合物最大吸收波长为 5 5 7nm ,线性范围 0～ 5 0 0μmol L ,摩尔吸光系数为 1 1 2× 1 0 5L·mol-1·cm-1。回收率为 99 9% ,批内变异系数 (CV)为2 1 % ,批间变异系数为 2 9% ,与原子吸收分光光度法 (x)比较具有良好的相关性 ,y =1 0 1 0x-0 1 5 4,r=0 991 8,P >0 0 5。可见本法测定血清锌不必去蛋白、用血量少、方法简便、灵敏可靠 ,适合临床应用     

5-Br-PADCAP 直接光度法测定血清未饱和铁结合力

为建立简便、灵敏的双试剂自动化分析法测定血清未饱和铁结合力(UIBC),在表面活性剂存在下,用2-(5-溴-2-吡啶偶氮)-5-[(N,N-二羧基甲基)氨基]苯酚(5-Br-PADCAP)为显色剂测定血清UIBC。结果表明,线性范围0~90μmol/L,平均回收率101.57%,批内变异系数(CV)和批间变异系数分别为0.028、0.046,与日本和光UIBC测定试剂盒比较具有良好的相关性,线性回归方程和相关系数分别为y=1.0133x-0.3356,r=0.9961。108例健康人血清UIBC含量为31.65~50.81μmol/L(±2s)。用5-Br-PADCAP双试剂自动化分析法测定血清UIBC方法简便、灵敏可靠,适合临床应用。     

2-(5-Br-2-吡啶偶氮)-5-[(N,N-二羧基甲基)氨基]苯酚与Fe(Ⅲ)显色反应的研究及其应用

新显色剂2-(5-Br-2-吡啶偶氮)-5-[(N,N-二羧基甲基)氨基]苯酚(5-Br-PADCAP)是一种灵敏度较高的显色剂,能与多种金属离子产生灵敏的显色反应。用5-Br-PADCAP测定锌及钴已有报道。但用5-Br-PADCAP作显色剂光度法测定铁未见报道。本文研究了Fe(Ⅱ)与5-Br-PADCAP的显色反应。试验表明,在pH 5.0～6.5范围内,Fe(Ⅱ)与5-Br-PADCAP形成稳定的配合物,配合物至少可稳定6h。最大吸收波长分别为560nm和740nm,以560nm作为测定波长,铁量在0～4μg/25ml范围     

血清铜自动分析法试剂盒的研制与分析: 5-Br-PADAP直接光度法

为研制、评价血清铜 5 -Br -PADAP自动分析法试剂盒 ,在表面活性剂存在下 ,用2 -(5 -溴 -2 -吡啶偶氮 ) -5 -二乙氨基酚 (5 -Br -PADAP)作显色剂 ,双试剂两点终点法测定血清铜。结果表明 ,该法线性范围 0～ 80 μmol L ,平均回收率为 1 0 0 7% ,批内变异系数 (CV)和批间变异系数分别为 0 0 1 5～ 0 0 2 0和 0 0 2 3～ 0 0 3 0 ,与原子吸收分光光度法比较具有良好的相关性 ,y =1 0 0 1x -0 0 93 ,r=0 9948,P >0 0 5。 1 0 7例健康人血清铜含量为 1 6 68± 2 62 μmol·L-1(x± 2S)。可见用本试剂盒双试剂自动化分析法测定血清铜方法简便、灵敏可靠 ,适合临床应用     

干法灰化-铬天青S光度法测定血清铝含量

建立了一种快速、灵敏测定血清铝的分光光度方法。血清标本经灰化处理后 ,在表面活性剂CPC存在下 ,用铬天青S (CAS)作显色剂测定血清铝 ,线性范围 0～ 7 4μmol/L ,平均回收率为 1 0 0 6% ,批内变异系数 (CV)和批间变异系数分别为 0 0 2 8和 0 0 3 7,与Al-CAS络合法比较具有良好的相关性 ,y =0 .990 2x -0 0 1 3 0 ,r =0 .9977,P >0 0 5。 42例健康人血清铝含量为 0 92～ 4 1 6μmol/L ( x± 2s)。用本法测定血清铝方法简便、灵敏可靠 ,适合临床应用。     

单一试剂光度法测定血清铜

建立了一种非离子型表面活性剂吐温 80 (Tween 80 )及聚乙二醇辛基苯基醚 (OP)存在下 ,用 2 ( 3 ,5 二溴 2 吡啶偶氮 ) 5 二甲氨基酚 ( 3 ,5 diBr DMPAP)作显色剂直接光度法测定血清铜含量的新方法。用该法测定血清铜 ,显色络合物最大吸收波长为 5 74nm ,线性范围达 63 0μmol·L- 1,表观摩尔吸光系数为 6 91× 1 0 4 L·mol- 1·cm- 1。回收率为 97 2 %～ 1 0 1 5 % ,批内和批间变异系数 (CV)分别为 2 7%与 3 8% ,与原子吸收分光光度法比较相关性良好 ,y =0 98x +0 43 ,r=0 9993 ,P >0 0 5 ,42例健康人血清铜含量为 8 3～ 2 4 9μmol·L- 1( x± 2s)。用该法进行血清铜含量测定 ,准确性和重现性均较好 ,且血清用量少 ,不必去蛋白 ,操作步骤简化 ,具有试剂单一稳定 ,操作简便快速 ,结果灵敏可靠等优点 ,适合临床应用。     

改良的5-Br-PADAP光度法测定水中铜离子含量

目的建立了改良的5-Br-PADAP光度法测定水中铜离子含量。方法为在表面活性剂存在下,用2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)为显色剂测定水中铜离子含量。结果该法线性范围0~0.24 mg/L,平均回收率为99.9%,批内变异系数(CV)和批间变异系数分别为1.08%~2.62%和4.23%~4.57%,与原子吸收分光光度法比较具有良好的相关性,线性回归方程和相关系数分别为y=0.983 4 x+0.002 1,r=0.999 1。结论用改良的5-Br-PADAP光度法测定水中铜离子浓度方法简便、灵敏可靠,适合推广应用。     

三试剂自动分析法测定血清总铁结合力——5-Br-PADAP直接光度法

为建立简便、灵敏的测定血清总铁结合力(TIBC)自动化分析法,在表面活性剂存在下,用2-(5-溴-2-吡啶偶氮)-5-二乙氨基酚(5-Br-PADAP)为显色剂测定血清TIBC。该法线性范围0~180μmol/L,平均回收率为99.71%,批内变异系数(CV)和批间变异系数分别为0.024、0.041,与临床检验操作规程推荐的方法比较具有良好的相关性,线性回归方程和相关系数分别为y=0.994 3x 1.220 6,r=0.996 8。血清TIBC含量测定结果(-x±2s):105例健康男性48.0~76.0μmol/L,98例健康女性血清52.0~76.0μmol/L。可见用5-Br-PADAP三试剂自动化分析法测定血清TIBC方法简便、灵敏可靠,适合临床应用。     

高灵敏分光光度法测定全血铁

为建立一种快速、简便、灵敏的分光光度法测定全血中微量铁,在非离子型表面活性剂聚氧乙烯月桂醚(Brij-3 5 )及聚氧乙烯异辛基苯基醚(TritonX -1 0 0 )存在下,用2 (5 硝基2 吡啶偶氮) 5 [N 正丙基 N (3 磺酸丙基)氨基]苯酚二钠(简称Nitro -PAPS)作显色剂直接光度法测定全血中微量铁。结果表明,该法在pH 4 0的乙酸乙酸钠缓冲液中,以5 90nm为测定波长,可直接测定全血中微量铁,本法线性范围为0～2 2 7μg/mL ,表观摩尔吸光系数为9 97×1 0 4L/(mol·cm) ,回收率为97 5 %～1 0 1 8%。结论:该法具有操作快速、简便、结果灵敏可靠等优点,适合临床医疗、预防保健等应用,值得推广。     

分光光度法测定精液锌的含量

建立了一种表面活性剂TritonX -1 0 0存在下 ,用 2 -(5 -溴 -2 -吡啶偶氮 ) -5 -二甲氨基酚 (简称 5 -Br-DMPAP)作显色剂直接光度法测定精液锌含量的新方法。该法显色络合物最大吸收波长为 5 5 6nm ,线性范围达 4 5 9mmol·L- 1,表观摩尔吸光系数为 1 1 2× 1 0 5L·mol- 1·cm- 1,回收率为 97 3 %～ 1 0 4 2 % ,批内和批间变异系数 (CV)分别为 3 1 %与 4 2 % ,与原子吸收分光光度法比较相关良好 ,y =0 984x +0 0 1 ,x =0 9869,P >0 0 5 (n =3 2 )。该法具有操作快速、简便、结果灵敏可靠等优点 ,适合在临床上推广应用     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.