Facilely synthesized N-doped graphene sheets and its ferromagnetic origin

Inducing ferromagnetism into graphene is vital today because it has a wide range of applications such as spintronics devices and magnetic memory devices. In this paper, we will report a new method to synthesize ferromagnetic graphene by nitrogen doping. X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were utilized to testify the N-doped material and further discuss the N-doped process. The superconducting quantum interference device (SQUID) was put in and used to analyze the magnetic properties of the N-doped graphene sheets. It shows that the material exhibits ferromagnetism at both 3 K and 300 K and the ferromagnetic saturation moment is 0.412 emu/g and 0.051 emu/g, respectively. The mechanism of the origin of the ferromagnetism in N-doped graphene sheets will also be discussed in this paper. It shows that, when the amount graphitic N reached the threshold, the origin of the ferromagnetism will change from defects induced by nitrogen atoms to the transition in energy band caused by graphitic N.     

Influence of nitrogen doping on oxygen reduction electrocatalysis at carbon nanofiber electrodes

Nondoped and nitrogen-doped (N-doped) carbon nanofiber (CNF) electrodes were prepared via a floating catalyst chemical vapor deposition (CVD) method using precursors consisting of ferrocene and either xylene or pyridine to control the nitrogen content. Structural and compositional differences between the nondoped and N-doped varieties were assessed using TEM, BET, Raman, TGA, and XPS. Electrochemical methods were used to study the influence of nitrogen doping on the oxygen reduction reaction (ORR). The N-doped CNF electrodes demonstrate significant catalytic activity toward oxygen reduction in aqueous KNO(3) solutions at neutral to basic pH. Electrochemical data are presented which indicate that the ORR proceeds by the peroxide pathway via two successive two-electron reductions. However, for N-doped CNF electrodes, the reduction process can be treated as a catalytic regenerative process where the intermediate hydroperoxide (HO(2)(-)) is chemically decomposed to regenerate oxygen, 2HO(2)(-) <==> O(2) + 2OH(-). The proposed electrocatalysis mechanisms for ORR at both nondoped and N-doped varieties are supported by electrochemical simulations and by measured difference in hydroperoxide decomposition rate constants. Remarkably, approximately 100 fold enhancement for hydroperoxide decomposition is observed for N-doped CNFs, with rates comparable to the best known peroxide decomposition catalysts. Collectively the data indicate that exposed edge plane defects and nitrogen doping are important factors for influencing adsorption of reactive intermediates (i.e., superoxide, hydroperoxide) and for enhancing electrocatalysis for the ORR at nanostructured carbon electrodes.     

碳辅助金属配合物热解法制备高含量Fe-N4单原子催化剂用于氧还原反应

单原子催化剂凭借其超高的原子利用率及在某些反应中表现出的出色催化效果,被认为是最有前途的电催化剂之一,引起了研究人员的极大热情和兴趣.制备高金属含量的单原子催化剂是基础研究和实际应用的前提和关键.然而,由于原子表面自由能随着尺寸的减小而急剧增加,在制备和催化过程中,单原子催化剂的金属原子很容易聚集成团簇甚至颗粒,因此如何制备高负载量的单原子催化剂仍然是一个不小的挑战.在众多单原子催化剂中,非贵金属中铁基单原子被认为是燃料电池中的Pt催化剂的有效替代品.在燃料电池的核心反应–电化学氧还原反应中,Fe-N_x被证明是铁单原子催化剂中的主要活性中心.因此,为了获得更好的氧还原性能,提高铁单原子催化剂中Fe-N_x的含量就显得非常关键.前期已报道了一些关于制备高Fe含量的铁单原子催化剂材料的策略,例如空间限域策略和配位合成策略.其中卟啉和葡萄糖作为配位剂,双氰胺和三聚氰胺可热解成氮掺杂碳材料以捕获金属原子,形成M-N_x.同时,具有高比表面积的富氧碳载体可以通过掺杂氮来作为固定金属原子的位点.我们开发了一种简单直接的方法,通过碳辅助金属配合物热解法制备高金属含量的Fe-N4单原子催化剂,即在最佳碳化温度800℃、三聚氰胺存在下对氮掺杂多孔碳辅助分散铁邻苯二胺配合物进行热解.在该方法中,氮掺杂多孔碳是一种具有丰富氮缺陷,高表面积(1267 m²?g^–1)和良好分散性的多孔生物质碳材料.邻苯二胺作为含两个氨基的二齿配体,可以很容易地与过渡金属配位,形成稳定的平面四配位络合物.此外,由于在高温条件下过渡金属的催化作用,邻苯二胺也被用作氮掺杂碳的前体.因此,氮掺杂多孔碳和邻苯二胺是合成高金属含量铁单原子催化剂的关键前驱体.通过X射线光电子能谱,大角度环形暗场扫描透射电子显微镜和X射线吸收精细结构光谱表征,发现所制备的铁单原子催化剂中铁原子以单个原子的形式锚固在碳载体上,并与碳基质的四个掺杂氮原子配位,得到Fe-N₄的构型.通过调节Fe前驱体量,铁单原子催化剂中Fe的最高负载量达到7.5 wt%,在目前已经报道的铁单原子催化剂中排第四.电化学氧还原测试表明,在0.10 M KOH溶液中,随着铁含量的增加,铁单原子催化剂的氧还原性能逐渐提高.其中250Fe-SA/NPC-800样品表现出最高起始电位0.97 V和最正的半波电位0.85 V,可与市售的40%Pt/C催化剂相媲美.和已报道的铁单原子催化剂相比,由于我们制得的催化剂的比表面积较低,只有247 m²?g^–1,所以制约了催化剂的性能.在混合动力学势域中,根据Koutecky-Levich方程计算得出的电子转移数约为3.6,表明250Fe-SA/NPC-800主要催化四电子转移过程,这可以归因于以Fe-N₄活性中心降低了四电子过程中关键中间体的形成能垒及过程的自由能变化.此外,250Fe-SA/NPC-800展现了较高的电化学稳定性.连续工作6 h后,250Fe-SA/NPC-800保留了超过87%的电流密度,而Pt/C表现出明显的衰减,仅保留了49%.     

Nitrogen-doped pyrogenic carbonaceous matter facilitates azo dye decolorization by sulfide: The important role of graphitic nitrogen

Pyrogenic carbonaceous matter(PCM) catalyzes azo dye decolorization by sulfide, but the nitrogen doping catalytic mechanisms are poorly understood. In this study, we found that stagnate time of azo dye methyl orange(MO) decolorization was reduced to 0.54-18.28 min in the presence of various nitrogen-doped graphenes(NGs), remarkably lower compared to graphene itself. Particularly, graphitic nitrogen played a critical role in NGs-catalyzed MO decolorization by sulfide. Gas chromatography-mass spec...     

3D nitrogen-doped graphene aerogel-supported Fe3O4 nanoparticles as efficient electrocatalysts for the oxygen reduction reaction

Three-dimensional (3D) N-doped graphene aerogel (N-GA)-supported Fe(3)O(4) nanoparticles (Fe(3)O(4)/N-GAs) as efficient cathode catalysts for the oxygen reduction reaction (ORR) are reported. The graphene hybrids exhibit an interconnected macroporous framework of graphene sheets with uniform dispersion of Fe(3)O(4) nanoparticles (NPs). In studying the effects of the carbon support on the Fe(3)O(4) NPs for the ORR, we found that Fe(3)O(4)/N-GAs show a more positive onset potential, higher cathodic density, lower H(2)O(2) yield, and higher electron transfer number for the ORR in alkaline media than Fe(3)O(4) NPs supported on N-doped carbon black or N-doped graphene sheets, highlighting the importance of the 3D macropores and high specific surface area of the GA support for improving the ORR performance. Furthermore, Fe(3)O(4)/N-GAs show better durability than the commercial Pt/C catalyst.     

Dual Graphitic‐N Doping in a Six‐Membered C‐Ring of Graphene‐Analogous Particles Enables an Efficient Electrocatalyst for the Hydrogen Evolution Reaction

Graphene‐based materials still exhibit poor electrocatalytic activities for the hydrogen evolution reaction (HER) although they are considered to be the most promising electrocatalysts. We fabricated a graphene‐analogous material displaying exceptional activity towards the HER under acidic conditions with an overpotential (57 mV at 10 mA cm^?2) and Tafel slope (44.6 mV dec^?1) superior to previously reported graphene‐based materials, and even comparable to the state‐of‐the art Pt/C catalyst. X‐ray absorption near‐edge structure (XANES) and solid‐state NMR studies reveal that the distinct feature of its structure is dual graphitic‐N doping in a six‐membered carbon ring. Density functional theory (DFT) calculations show that the unique doped structure is beneficial for the activation of C?H bonds and to make the carbon atom bonded to two graphitic N atoms an active site for the HER.     

有机膦酸盐衍生的氮掺杂的磷酸钴/碳纳米管杂化材料作为高效氧还原电催化剂（英文）

随着环境污染和能源危机的日益严重,探索高效的非贵金属氧还原电催化剂来替代商业Pt/C迫在眉睫.其中,报道比较多的是具有钴基活性物种和氮掺杂碳的复合材料例如Co-Nx-C, Co3O4/GO, Co-N/CNT等,该复合材料具有高导电性、良好的稳定性和优异的催化活性.与其他钴基催化剂相比,磷酸钴由于其成本低廉,对环境友好,多功能的优良特性,已被广泛应用于催化、吸附、分离及储能等领域,在电催化方面也有极大的应用潜力.研究表明,磷酸基团不仅可以充当质子受体,也会诱导局部钴原子的几何结构发生扭曲,从而有利于水分子的吸附并促进析氧反应的发生.此外,磷酸钴也被证实具有一定的氧还原活性.尽管磷酸钴电催化剂的研究已经取得了一定进展,磷酸根有利于质子传输,但是其导电性很差,不利于电荷的转移和传输,使得其电催化活性不高.将磷酸钴和导电碳材料复合是解决问题的有效方法.而且,磷酸钴在碱性溶液中并不稳定,极大限制了其在电催化氧还原中的应用.金属有机膦酸盐是一类包含金属离子和有机膦酸配体的杂化材料,通过简单的焙烧便可以很容易地得到金属无机磷酸盐,并且在焙烧过程中氮掺杂的碳也会原位产生,并包覆在磷酸钴的表面,使得其导电性和催化活性大大提高.为此,本研究组制备了有机膦酸钴衍生的磷酸钴和氮磷掺杂的石墨烯的复合材料并用于电催化氧还原和析氧反应,所得到的材料导电性和稳定性良好,然而,该催化剂的表观活性与商业Pt/C相比仍有较大差距,且使用有机膦酸钴作为前驱体对活性的影响也不甚清楚.因此,本文采用含氮的有机膦酸配体乙二胺四亚甲基膦酸钠(EDTMPS)为磷源制备了氮掺杂的磷酸钴/碳纳米管杂化材料(CoPiC-N/CNT-3),其催化活性和稳定性良好,并进一步探讨了各种不同因素对电催化活性的影响.XRD和TEM结果表明,用这种方法得到的磷酸钴(CoPiC)为Co2P2O7物相,与磷酸二氢钠为磷源制备得到的CoPi相比,CoPiC的表面有石墨化碳层的存在, EDS图谱表明, Co, P, C, N均匀地掺杂到复合材料的骨架结构中.Raman光谱结果表明,石墨化碳层的存在和适量的碳纳米管的引入均可以增强复合材料的石墨化程度并提高了导电性,而氮掺杂导致其缺陷位点增多.XPS结果进一步表明,有机膦酸钴可以作为前驱体可制得氮掺杂的磷酸钴/碳纳米管杂化材料.电催化反应测试表明, CoPi C-N/CNT-3的氧还原活性与商业Pt/C相当,其遵循的是4电子的反应路径,而且抗甲醇氧化能力和稳定性均优于Pt/C.原因主要归结于以下几点:(1)磷酸钴颗粒与氧化碳纳米管的协同作用可以显著增强氧还原催化活性,引入的碳纳米管可以克服磷酸钴导电性差的缺陷;(2)磷酸钴在复合材料中分散均匀,使得可以充分利用催化剂的活性位点;(3)氮掺杂可以调变材料的电子结构,从而改善催化活性;(4)石墨化碳层的存在可以改善材料的电子导电性和稳定性,有利于电子转移并可以保护磷酸钴颗粒在催化氧还原反应过程中不被电解液腐蚀.可见,所制有机膦酸衍生的氮掺杂的磷酸钴/碳纳米管杂化材料有望替代Pt/C催化剂,并推动清洁可再生能源领域的相关研究.     

Heterogeneous liquid phase oxidation of ethylbenzene to acetophenone with graphene carbon-based catalyst

The series of graphene materials and N-doped graphene materials were successfully synthesized and improved by high-temperature treatment with trace iron oxide. XRD, Raman, FT-IR, TEM and XPS were employed for these catalysts. The catalytic performance of these catalysts was investigated in the selective oxidation of ethylbenzene with tert-butyl hydroperoxide as oxidant. The impacts of temperature, mass of catalysts, reaction time and oxidants on the selective oxidation of ethylbenzene were also investigated. The N-doped graphene materials exhibit greatly remarkable catalytic performance than others. The conversion of ethylbenzene is more than 90% and the selectivity of acetophenone is more than 95% at 353 K. Graphene can be used as catalyst owing to its unique structures and chemical properties. The characterization tests show that the doping of N atoms can create more defects and more active sites in the N-doped graphene materials which could greatly improve the catalytic performance. Furthermore, such cost-effective graphene-based catalysts possess good stability and could be reused at least five times without remarkable loss of the catalytic activity.     

Nitrogen‐Doped Carbon Nanomaterials: Synthesis,Characteristics and Applications

Nonmetallic carbon‐based nanomaterials (CNMs) are important in various potential applications, especially after the emergence of graphene and carbon nanotubes, which demonstrate outstanding properties arising from their unique nanostructures. The pristine graphitic structure of CNMs consists of sp² hybrid C?C bonds and is considered to be neutral in nature with low wettability and poor reactivity. To improve its compatibility with other materials and, hence, for greater applicability, CNMs are generally required to be functionalized effectively and/or doped with heteroatoms in their graphitic frameworks for feasible interfacial interactions. Among the various possible functional/doping elements, nitrogen (N) atoms have received much attention given their potential to fine tune the intrinsic properties, such as the work‐function, charge carrier concentration, surface energy, and polarization, of CNMs. N‐doping improves the surface energy and reactivity with enhanced charge polarization and minimal damage to carbon frameworks. The modified surface energy and chemical activity of N‐doped carbon nanomaterials (NCNMs) can be useful for a broad range of applications, including fuel cells, solar cells, Li‐ion batteries, supercapacitors, chemical catalysts, catalyst supports, and so forth.     

氮掺杂石墨烯的生长机理及其在乙苯选择性氧化中的应用

以热解氧化石墨烯材料为碳基底,分别使用有机氮源和无机氮源对其进行氮掺杂处理,制备了一系列氮掺杂石墨烯材料.采用透射电子显微镜、扫描电子显微镜、拉曼光谱和X射线光电子能谱等表征方法考察了氮掺杂石墨烯的生长机理.结果表明,随着制备过程中退火温度的改变,氮掺杂石墨烯中不同氮物种的含量有显著差别.这种差异是由不同氮物种化学环境的差异所导致的.所制备的含氮石墨烯材料对乙苯选择性氧化制苯乙酮反应均表现出优良的催化活性.其中,石墨氮的含量对于提高苯乙酮收率起到至关重要的作用.此外,通过氧化剂控制活化的方法可以消除过多的结构缺陷和过量氮掺杂对催化反应的不利影响,有效提升氮掺杂石墨烯的催化活性.     

铁、氮掺杂石墨烯/碳黑复合材料的制备及氧还原电催化性能

以高含氮量的2-氨基咪唑为氮源,三氯化铁为铁源,高比表面积的KJ600碳黑为载体,通过水热法制得氨基咪唑聚合物前驱体,再经二次高温热处理,制得石墨烯/碳黑复合材料. 透射电镜表征显示该材料为石墨烯纳米片与碳黑颗粒的复合结构. BET表征表明这是一种多孔结构,具有很高的比表面积（882 m²•g^-1）,这有利于暴露更多活性位点,并促进传质. XRD证实催化剂中存在石墨烯,且石墨烯结构是在第一次热处理过程中形成的. 电化学测试表明,该催化剂在酸性和碱性介质中都具有很高的氧还原电催化活性和低H₂O₂产率,并且在碱性介质中对甲醇小分子的抗毒化性能明显优于商业Pt/C催化剂,展示出在实际燃料电池系统中的应用潜力.     

Highly Dispersed Pt Nanoparticles Embedded in N-Doped Porous Carbon for Efficient Hydrogen Evolution

A novel and facile strategy is presented to synthesize highly dispersed Pt nanoparticles embedded in N-doped porous carbon (Pt@NPC) via carbonization of Zn-containing metal-organic frameworks and chemical replacement of Zn with Pt. The as-prepared Pt@NPC exhibits superior activity and durability towards hydrogen evolution reaction (HER) in comparison with commercial Pt/C catalyst. The excellent HER performance of Pt@NPC can be ascribed to the combined features of catalyst and support material, including high dispersion and ultrathin particle size of Pt, high surface area and nitrogen doping of carbon support, and the strong interaction between metal and support.     

High-loading Pt nanoparticles on mesoporous carbon with large mesopores for highly active methanol electro-oxidation

High metal-loading Pt/C electrocatalysts are important for the fabrication of thin-layered membrane electrode assemblies (MEAs). However, the preparation of high-loading Pt catalysts with a narrow size distribution of nanoparticles remains a challenge. Herein, ordered mesoporous carbon (OMC) with large mesopores (~15 nm) and a high surface area (1316.0 m² g^?1) was fabricated using a SiO₂ nanosphere array as a template. This material was developed to support a high loading of Pt nanoparticles (60 wt%) and was then used as an electrocatalyst for the methanol oxidation reaction (MOR). The prepared Pt/OMC contains Pt nanoparticles with an average size of ~1.9 nm that are uniformly dispersed on the mesoporous walls of the OMC. The Pt/OMC catalyst exhibits smaller Pt nanoparticle size, greater Pt dispersion, larger specific electrochemically active surface area (ECSA), and higher electrocatalytic activity for the MOR than the carbon black (Vulcan XC-72R)-supported Pt and the commercial Pt/C catalysts.     

Hydrothermal-Induced Formation of Well-Defined Hollow Carbons with Curvature-Activated N−C Sites for Zn–Air Batteries

Metal-free carbons have been regarded as one of the promising materials alternatives to precious-metal catalysts for oxygen reduction reaction (ORR) due to their high activity and stability. In this paper, well-defined N-doped hollow carbons (NHCs) are firstly synthesized by using an ammonia-based hydrothermal synthesis that is environmentally friendly and suitable for mass production in industry and a commercial black carbon as raw material. Moreover, the shell thickness of the NHCs can be easily tuned by this hydrothermal strategy. Zn–air battery test results reveal shell thickness-dependent activity and durability for ORR over the NHCs, which exceeds that obtained by commercial Pt/C (20 wt %). The enhanced battery performance can be attributed to the curvature-activated N–C moieties on the hollow carbon surface, which served as the main active sites for ORR as evidenced by DFT calculations. The proposed approach may open a way for designing curved hollow carbons with high graphitization degree and dopant nitrogen level for metal–air batteries or fuel cells.     

调控碳材料的功函数以大幅度提升其电催化氧还原性能

氧的电催化还原反应是燃料电池装置与金属空气电池的阴极反应,具有重大的研究意义.在众多的非铂催化剂中,碳材料因其低廉的价格以及独特的物理化学性质受到了广泛的关注.自从发现氮掺杂的碳纳米阵列具有优异的氧还原活性后,不同类型的氮掺杂的碳也得到了深入研究.例如近年来兴起的由金属有机框架衍生的氮掺杂的碳材料,兼具丰富的氮位点及良好的三维结构.氮的掺杂对碳原子具有电子调控的作用,是其高氧还原活性的根本原因.本文对金属有机框架衍生的氮掺杂的碳材料进行进一步的电子结构的优化,以提升催化性能.功函是电子逸出表面所需的最少的能量,是材料的电子结构性质之一,其对氧还原反应的影响也有报道,早期以理论计算为基础,探究氧气分子在碳材料表面的解离能与氮掺杂的碳的表面功函的关系,后续则采用开尔文探针显微镜,直接测量了不同元素掺杂的碳表面功函,并建立起功函与氧还原动力学的线性关系.本文通过控制碳材料的功函来调节其电子结构.铯是一种经典的给电子物质,通过将电子注入到掺杂材料表面来降低其功函.因此,本文通过CsCO₃与2-甲基咪唑、Zn(NO₃)₂煅烧形成铯修饰的氮掺杂碳.电镜及XRD均观察不到所得材料中铯的存在,证明碳层中无大颗粒团聚的铯物种.EDS元素分布图表明,铯在碳层中呈原子级均匀分布.Raman谱结果表明,碳的G带发生明显的位置偏移,证明其面内电子结构发生了明显的改变.XPS结果证明铯成功与氮原子配位,通过铯氮键将电子注入到碳骨架.UPS则最终显示,经过铯的修饰,碳表面功函从4.25 eV下降到3.6 eV.表面功函的降低有利于氧气分子的解离,也调节OOH^*中间体的吸附,使其吸附的自由能更接近最优值.材料改性后氧还原性能明显提升,起始电位达到0.91 V vs RHE,半波电位达到0.83 V vs RHE,均接近商业Pt/C催化剂.氧还原反应的动力学电流密度随功函的降低而增大,验证了前人的结论.本文提供了一个较为新颖的电子结构调控策略,为设计新的氧还原催化剂提供了新的思路.     

基于石墨烯基材料的非金属液相催化反应

非金属碳基催化剂因其具有合成简单、结构稳定、比表面积大、可调控性强等特点受到了研究者的关注,已成为最活跃的研究领域之一。以二维、单原子层、六方结构的碳为基础的石墨烯和其高度氧化形态——氧化石墨烯是一类新兴的碳基材料。这类材料在催化领域的应用在近五年内才刚刚兴起。此类材料可用于烃类转化、有机化学合成、能源转化等多种催化反应,本文主要综述了采用化学氧化还原法制备的石墨烯和氧化石墨材料为催化剂的各类催化反应的最新研究进展。     

Fe3C coupled with Fe-Nx supported on N-doped carbon as oxygen reduction catalyst for assembling Zn-air battery to drive water splitting

Fe-N-C structures have been considered as a candidate to replace noble metal catalysts towards oxygen reduction reaction (ORR) due to their excellent electrocatalytic activity and durability. Herein, a zinc-mediated synthesis strategy is proposed for N-doped graphitic porous carbon encapsulated uniform dispersed Fe₃C nanoparticles coupled with atomically dispersed Fe-N_x moieties (NPC/Fe-N-C) derived from biomass coconut shell. The introduction of zinc species could be conductive to the dispersion of iron species and formation of porous structures. Density functional theory calculations demonstrate that the N-doped carbon coating structures can weaken the oxygen intermediates adsorption energy barrier of Fe₃C. Beside, the graphitic carbon could promote the electron transfer during the electrochemical reaction. These special structures enable NPC/Fe-N-C to have excellent ORR activity with an E_onset of 1.0 V, which is much better than Pt/C. Furthermore, the zinc-air battery assembled by pairing NPC/Fe-N-C with a high-efficiency oxygen evolution reaction (OER) catalyst can continuously and stably operate a charge-discharge potential gap of 0.8 V at 10 mA/cm² for more than 600 h. More importantly, the assembled batteries could drive overall water splitting device, realizing the effective energy conversion.     

聚苯胺改性氮掺杂碳纳米管制备及其超级电容器性能

利用苯胺原位化学聚合合成聚苯胺包覆碳纳米管(CNTs), 再炭化处理制备氮掺杂碳纳米管(NCNTs).激光拉曼(Raman)光谱和X射线光电子谱(XPS)分析及透射电镜(TEM)观察表明, 苯胺包覆碳纳米管经炭化处理后, 得到以碳纳米管为核、氮掺杂碳层为壳, 具有核-壳结构的氮掺杂碳纳米管, 而碳纳米管本征结构未遭破坏. 研究表明, 随着苯胺用量的增大, 氮掺杂碳纳米管的氮掺杂碳层变厚, 氮含量从7.06%(质量分数)增加到8.64%, 而作为超级电容器电极材料, 随着氮掺杂碳层厚度降低, 氮掺杂碳纳米管在6 mol·L^-1氢氧化钾电解液中的比容量从107 F·g^-1增大到205 F·g^-1, 远高于原始碳纳米管10 F·g^-1的比容量, 且聚苯胺改性氮掺杂碳纳米管表现出较好的充放电循环性, 经1000次充放电循环后仍保持初始容量的92.8%~97.1%, 表明氮掺杂碳纳米管不仅通过表面氮杂原子引入大的法拉第电容和改善亲水性使电容量显著增大, 其具有的核壳结构特征也使循环稳定性增强。     

Enhancement of oxygen evolution reaction by X-doped (X = Se,S, P) holey graphitic carbon shell encapsulating NiCoFe nanoparticles: a combined experimental and theoretical study

Among the two half-reactions of the electrochemical water splitting, the anodic oxygen evolution reaction (OER) is a kinetically sluggish process and usually requires noble metal oxide catalysts. Therefore, the development of highly active, noble metal-free, and durable catalysts for OER is an urgent need for sustainable applications. The encapsulation of transition-metal alloyed nanoparticles in graphitic carbon layers, with core-shell features, is a viable approach for establishing an undegradable and highly efficient catalyst toward OER. Furthermore, the reactivity of the carbon shell surface can be further improved by the electron transfers between the core alloy and carbon shell, through a control of the alloyed nanoparticle compositions, or through a chemical doping. Nevertheless, it is still not clear whether the incorporation of a chemical dopant directly into the carbon shells systematically promotes the catalytic activities toward OER. To clarify this point, we synthetize trimetallic (CoNiFe) nanoparticles encapsulated in graphitic carbon shells by pyrolysis of metal?organic frameworks. We then investigate the effect of a doped graphitic carbon shell by incorporating non-metallic elements such as sulfur, phosphorus, and selenium. The main finding is that all doped CoNiFe@C core-shell catalysts exhibit an enhanced catalytic activity toward OER in the alkaline electrolyte with a low overpotential, a small Tafel slope, and long stability, which are all being comparable to those of RuO₂ benchmark. Electrochemical impedance spectroscopy, X-ray photoelectron spectroscopic, and Raman measurements collected at different applied potentials during the OER process indicate that the doping of graphitic carbon shell significantly improves the interfacial electron-transfer kinetics and facilitates the adsorption of OH^? ion as well as promotes the formation of metal oxyhydroxide, which positively affect the OER performances. Moreover, this improvement in OER efficiency upon incorporating of a chemical doping is rationalized by the optimization of the Gibbs free energy of OER intermediates, thereby remarkably reducing the required energy input of rate-determining step, as elucidated by the density functional theory calculations.     

Low temperature growth of highly nitrogen-doped single crystal graphene arrays by chemical vapor deposition

The ability to dope graphene is highly important for modulating electrical properties of graphene. However, the current route for the synthesis of N-doped graphene by chemical vapor deposition (CVD) method mainly involves high growth temperature using ammonia gas or solid reagent melamine as nitrogen sources, leading to graphene with low doping level, polycrystalline nature, high defect density and low carrier mobility. Here, we demonstrate a self-assembly approach that allows the synthesis of single-layer, single crystal and highly nitrogen-doped graphene domain arrays by self-organization of pyridine molecules on Cu surface at temperature as low as 300 °C. These N-doped graphene domains have a dominated geometric structure of tetragonal-shape, reflecting the single crystal nature confirmed by electron-diffraction measurements. The electrical measurements of these graphene domains showed their high carrier mobility, high doping level, and reliable N-doped behavior in both air and vacuum.