Bacterial cellulose-MMTs nanoreinforced composite films: novel wound dressing material with antibacterial properties

This study was conducted to develop nanocomposite films of bacterial cellulose (BC) and montmorillonite (MMT) with potent antibacterial activity and potential therapeutic value in wound healing and tissue regeneration. Different composites were prepared through impregnation of BC sheets with 2 and 4 % suspensions of MMT, Na-MMT, Ca-MMT and Cu-MMT. These modified MMTs were prepared through cation exchange strategy. The antibacterial activities of the composites were then assessed against Escherichia coli and Staphylococcus aureus through the disc diffusion assay and colony forming unit (CFU) count methods. BC-Cu-MMT composites prepared with 2 and 4 % MMT displayed clear zones of inhibition against E. coli (20 and 22 mm, respectively) and S. aureus (19 and 20.5 mm, respectively). The untainted BC, BC-MMT, BC-Na-MMT and BC-Ca-MMT did not show clear inhibitory zones against the tested organisms. The reduction in CFU observed following treatment with BC-MMTs (BC-MMT, BC-Na-MMT, BC-Ca-MMT and BC-Cu-MMT) prepared using 2 % MMTs suspension was 7.39, 14.8, 19.2 and 77.9 % for E. coli and 6.8, 13.7, 17.4 and 74.1 %, for S. aureus, respectively. When treated with BC-MMT, BC-Na-MMT, BC-Ca-MMT and BC-Cu-MMT prepared with 4 % MMTs suspension, the reduction in CFU increased to 10.58, 18.37, 24.62 and 85.01 % for E. coli and 9.44, 15.73, 20.40 and 79.79 % for S. aureus, respectively. The outcome of this study will facilitate the development of BC sheets as wound dressings and regeneration materials with antibacterial properties for therapeutic applications without any side effects.     

Application of ZnO nanoparticles to enhance the antimicrobial activity and ultraviolet protective property of bamboo pulp fabric

Hyperbranched polymer HSDA was synthesized from methyl acrylate, tetraethylenepentamine, and dodecanoic acid by melt polycondensation. ZnO nanoparticle colloidal solution was prepared in one step by mixing Zn(NO₃)₂ and HSDA aqueous solution under hydrothermal condition. The results of transmission electron microscopy and ultraviolet–visible (UV–Vis) spectroscopy indicated that ZnO nanoparticles were formed in colloidal solution. Bamboo pulp fabric was treated with ZnO nanoparticle colloidal solution by an impregnation method to provide the bamboo pulp fabric with antibacterial and UV protective properties. The whiteness, antibacterial activity, UV protective property, and washing durability of the ZnO nanoparticle-treated fabrics were determined. The results indicated that the bamboo pulp fabric treated with ZnO nanoparticles showed good UV protective properties and its ultraviolet protection factor (UPF) can reach 90.38. The UPF value of treated fabric drops to 70.42 after washing for 20 times, but it retains good UV protective properties. The ZnO nanoparticle-treated fabric showed 99.91 % bacterial reduction of Staphylococcus aureus and 99.97 % bacterial reduction of Escherichia coli. The fabric retained over 98.93 % reduction level even after being exposed to 20 consecutive home-laundering conditions. In addition, the results of scanning electron microscopy and X-ray spectroscopy confirmed that ZnO nanoparticles were fixed and well dispersed on bamboo pulp fabric.     

Modifying bacterial cellulose with gelatin peptides for improved rehydration

Bacterial cellulose (BC) is a nanoscale and useful biomaterial with a fine fiber network and high water holding capacity. However, dried BC exhibits poor rehydration ability. The present study investigated the rehydration ability of composites of hydrolyzed gelatin peptides (HGP) and hydroxypropylmethyl cellulose-modified BC (HBC). The HGP with molecular weights <9 kDa were obtained by hydrolyzing gelatin with a combination of 1 % alcalase and 1.5 % pronase E at 50 °C for 2 h. The HGP/HBC nanocomposites exhibited higher rehydration ratios than composites prepared with gelatin. According to SEM images, gelatin and HGP successfully penetrated the cellulose network in composite films prepared using both immersion and adsorption (DA) methods. The high hydrophilic property of HGP resulted in a rehydration ratio of approximately 180 % at a HGP/HBC ratio of 4.5:1 (W/W) in DA composites. The 1 min rehydrated HGP/HBC composites possessed similar mechanical properties to the original wet type composites. Overall, results indicated that the HGP/HBC composites prepared using the DA method demonstrated the highest rehydration ability among the composite films evaluated.     

Preparation and characterization of novel polyimide/functionalized ZnO bionanocomposite for gas separation and study of their antibacterial activity

In the present investigation novel Polyimide/functionalized ZnO (PI/ZnO) bionanocomposites containing amino acid (Methionine) and benzimidazole pendent groups with different amounts of modified ZnO nanoparticles (ZnO NPs) were successfully prepared through ultrasonic irradiation technique. Due to the high surface energy and tendency for agglomeration, the surface ZnO NPs was modified by a coupling agent as 3- methacryloxypropyl-trimethoxysilane (MPS) to form MPS-ZnO nanoparticles. The ultrasonic irradiation effectively changes the rheology and the glass transition temperature and the crystallinity of the composite polymer. PI/ZnO nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscope (TEM). TEM analysis showed that the modified ZnO nanoparticles were homogeneously dispersed in polymer matrix. The TGA results of PI/ZnO nanocomposites showed that the thermal stability is obviously improved the presence of MPS-ZnO NPs in comparison with the pure PI and that this increase is higher when the NP content increases. The permeabilities of pure H₂, CH₄, O₂, and N₂ gases through prepared membranes were determined at room temperature (25 °C) and 20 bar feed pressure. The membranes having 20% ZnO showed higher values of H₂ permeability, and H₂/CH₄ and H₂/N₂ ideal selectivities (the ratio of pair gas permeabilities) compared with other membranes. The antibacterial activity of bionanocomposite films was tested against gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa). Further, it was observed that antibacterial activity of the resulting hybrid biofilms showed somewhat higher for gram-positive bacteria compared to gram-negative bacteria.     

In situ production of nanocomposites of poly(vinyl alcohol) and cellulose nanofibrils from Gluconacetobacter bacteria: effect of chemical crosslinking

Nanocomposites of poly(vinyl alcohol) (PVA) reinforced with bacterial cellulose (BC) were bioproduced by Gluconacetobacter genus bacteria. BC was grown from a culture medium modified with water-soluble PVA to allow in situ assembly and production of a novel nanocomposite that displayed synergistic property contributions from the individual components. Chemical crosslinking with glyoxal was performed to avoid the loss of PVA matrix during purification steps and to improve the functional properties of composite films. Reinforcement with BC at 0.6, 6 and 14 wt% content yielded nanocomposites with excellent mechanical, thermal and dimensional properties as well as moisture stability. Young’s modulus and strength at break increased markedly with the reinforcing BC: relative to the control sample (in absence of BC), increases of 15, 165 and 680 % were determined for nanocomposites with 0.6, 6 and 14 % BC loading, respectively. The corresponding increase in tensile strengths at yield were 1, 12 and 40 %, respectively. The results indicate an exceptional reinforcing effect by the three-dimensional network structure formed by the BC upon biosynthesis embedded in the PVA matrix and also suggest a large percolation within the matrix. Bonding (mainly hydrogen bonding) and chemical crosslinking between the reinforcing phase and matrix were the main contributions to the properties of the nanocomposite.     

Enhanced zinc ion transport in gel polymer electrolyte: effect of nano-sized ZnO dispersion

The effect of the dispersion of zinc oxide (ZnO) nanoparticles in the zinc ion conducting gel polymer electrolyte is studied. Changes in the morphology/structure of the gel polymer electrolyte with the introduction of ZnO particles are distinctly observed using X-ray diffraction and scanning electron microscopy. The nanocomposites offer ionic conductivity values of >10^?3 S cm^?1 with good thermal and electrochemical stabilities. The variation of ionic conductivity with temperature follows the Vogel–Tamman–Fulcher behavior. AC impedance spectroscopy, cyclic voltammetry, and transport number measurements have confirmed Zn²⁺ ion conduction in the gel nanocomposites. An electrochemical stability window from ?2.25 to 2.25 V was obtained from voltammetric studies of nanocomposite films. The cationic (i.e., Zn²⁺ ion) transport number (t ₊) has been found to be significantly enhanced up to a maximum of 0.55 for the dispersion of 10 wt.% ZnO nanoparticles, indicating substantial enhancement in Zn²⁺ ion conductivity. The gel polymer electrolyte nanocomposite films with enhanced Zn²⁺ ion conductivity are useful as separators and electrolytes in Zn rechargeable batteries and other electrochemical applications.     

PLA-ZnO nanocomposite films: Water vapor barrier properties and specific end-use characteristics

PLA nanocomposite films with multifunctional characteristics such as mechanical, anti-UV, antibacterial, electrical, gas barrier properties are potentially of high interest as packaging biomaterials. Occasionally, desired and beneficial effects obtained by addition nanofillers come along with some drawbacks, leading to the sharp drop in the molecular weights of the polyester chains, and consequently an important loss of mechanical and thermal properties. Novel PLA-ZnO nanocomposite films were produced by melt-compounding PLA with 0.5–3% ZnO rod-like nanoparticles. The surface treatment of nanofiller by silanization (with triethoxy caprylylsilane) was necessary to obtain a better dispersion and to limit the decrease of molecular mass of PLA. The morphology, molecular, thermo-mechanical and transport properties to water vapor of PLA-ZnO films were analyzed with respect to the neat PLA. According to DSC and to XRD, the produced films were essentially amorphous. The changes in PLA permeation properties were strongly dependent on temperature and nanofiller loading. The well dispersed ZnO nanoparticles within the polyester matrix were effective in increasing the tortuosity of the diffusive path of the penetrant molecules. The activation energy remained similar for PLA and PLA-1% ZnO, but was found greater at higher loading of ZnO (3%), confirming the increased difficulty of travelling molecules to diffuse through PLA. In comparison to the neat PLA (presenting no antimicrobial efficacy), the nanocomposites were active against both Gram-positive and Gram-negative bacteria, stronger antibacterial activity being evidenced after 7 days elapsed time. By considering the multifunctional properties of PLA-ZnO nanocomposites, the films produced by extrusion can be considered a promising alternative as environmental-friendly packaging materials.     

Adding Value in Production of Multifunctional Polylactide (PLA)–ZnO Nanocomposite Films through Alternative Manufacturing Methods

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites.     

Spectral characterization of apatite formation on poly(2-hydroxyethylmethacrylate)-TiO2 nanocomposite film prepared by sol-gel process

Poly(2-hydroxyethylmethacrylate) films incorporated with titanium dioxide nanoparticles were successfully synthesized by an in situ sol-gel process. The in vitro bioactive properties of the films were assessed after immersion in simulated body fluid for up to 21 days through biomimetic method. Hydroxyapatite formation was observed on the surfaces of nanocomposites. This indicates that prepared composites are bioactive. Fourier transforms infrared spectroscopy, X-ray diffraction patterns, X-ray photoelectron spectroscopy and scanning electron microscope images confirm the hydroxyapatite formation on nanocomposite. The present study provides an analytical method for the assessment of titanium dioxide nanoparticles filled poly(2-hydroxyethylmethacrylate) polymer nanocomposites for biomedical applications.     

Bacterial cellulose films: influence of bacterial strain and drying route on film properties

Structural properties of bacterial cellulose (BC) depend on the microstructure of the material, which in turn is influenced by the bacterial strain. This paper reports the production of BC thin films from two bacterial strains, gluconacetobacter xylinus (GX) and gluconacetobacter europaeus (GE), and three methods of drying the films; at room temperature, freeze drying and supercritical drying. The porosity, transparency, water absorption capacity (WAC) and mechanical properties of the obtained films are further investigated. We conclude that materials with different properties can be fabricated by selecting the bacterial strain or the drying method. Supercritical drying of films of GE achieved mechanically robust and extremely light films, 0.05 g/mL, with up to 96 % of porosity, and with a WAC up 110 times their dried weight. We determined that materials resulting from GE strain are not much affected by the drying method. On the other hand, GX produced BC films more sensitive to the drying method used. Films are denser, 0.6–0.2 g/mL, with tunable porosity from 60 to 90 % and their maximum WAC is 66 times their dried weight.     

Sustainable optically transparent composites based on epoxidized soy-bean oil (ESO) matrix and high contents of bacterial cellulose (BC)

Production of transparent composites from totally renewable resources with extraordinary potential for different applications can be made possible using cellulose. Composites of epoxidized soybean oil (ESO)/bacterial cellulose (BC) nanofibers have been prepared with high fiber content. Due to the nano-order scale network-like structure of BC nanofibers, composite films present high transparency even at high BC content. Transparency of films has been analyzed by UV–visible spectroscopy observing that only 15% of matrix transmittance is lost in the nanocomposites. ESO/BC composites show better mechanical properties with increasing BC content. Composites combine high stiffness and good ductility due to the incorporation of BC network structure in ESO matrix.     

Engineering quaternized chitosan in the 3D bacterial cellulose structure for antibacterial wound dressings

Balancing antibacterial properties with biocompatibility is of paramount importance for wound dressings loaded with antibacterial agents. In this work, a water soluble antibacterial agent, quaternized chitosan (hydroxypropyltrimethyl ammonium chloride chitosan, HACC) with an appropriate degree of substitution was introduced into the bacterial cellulose (BC) network by adding it into the BC culture medium. Results indicated that the addition of HACC could affect the yield of BC, porous structure, thermal stability, water absorption and antibacterial properties. HBC-1 with a low content of HACC (13.65 ± 0.30%) cannot inhibit the biofilm formation of bacteria, while HBC-3 with a high content of HACC (62.05 ± 0.90%) has a low yield of BC and confused structure. HBC-2 with an optimum concentration of HACC (37.33 ± 0.80%) possessed a typical porous structure, acceptable thermal stability, good water absorption and favorable antibacterial properties against Staphylococcus aureus (S. aureus, ATCC 25923) and methicillin-resistant S. aureus (ATCC 43300). Most importantly, none of the HACC/BC films exhibited cytotoxicity to NIH3T3 cells. We believe that obtained HACC/BC films with favorable bactericidal properties and biocompatibility could be potential candidates for wound dressings in clinical applications.     

Evaluation of Chitosan-Based Films Containing Gelatin,Chondroitin 4-Sulfate and ZnO for Wound Healing

In this work, chitosan-based films containing gelatin and chondroitin-4-sulfate (C4S) with and without ZnO particles were produced and tested in vitro to investigate their potential wound healing properties. Chitosans were produced from shrimp-head processing waste by alkaline deacetylation of chitin to obtain chitosans differing in molecular weight and degree of deacetylation (80 ± 0.5%). The film-forming solutions (chitosan, C4S and gelatin) and ZnO suspension showed no toxicity towards fibroblasts or keratinocytes. Chitosan was able to agglutinate red blood cells, and film-forming solutions induced no hemolysis. Film components were released into solution when incubated in PBS as demonstrated by protein and sugar determination. These data suggest that a stable, chitosan-based film with low toxicity and an ability to release components would be able to establish a biocompatible microenvironment for cell growth. Chitosan-based films significantly increased the percentage of wound healing (wound contraction from 65 to 86%) in skin with full-thickness excision when compared with control (51%), after 6 days. Moreover, histological analysis showed increased granulation tissue in chitosan and chitosan/gelatin/C4S/ZnO films. Chitosan-based biopolymer composites could be used for improved biomedical applications such as wound dressings, giving them enhanced properties.     

Formation of nanocrystalline ZnO particles into bacterial cellulose pellicle by ultrasonic-assisted in situ synthesis

Nanocrystalline zinc oxide particles were synthesized and simultaneously incorporated into a three-dimensional nanofibrous matrix of bacterial cellulose (BC) pellicles by a newly created method called “ultrasonic-assisted in situ synthesis”. The BC pellicles were first immersed in a zinc acetate solution. Then the Zn²⁺-absorbed BC pellicle was further immersed in ammonium hydroxide solution with simultaneous ultrasonic treatment. The effect of immersion time of the BC pellicles in zinc acetate solution and ultrasonic treatment time on crystalline size and percent incorporation of ZnO into the BC pellicles were determined. The crystalline size of ZnO incorporated in BC pellicles was in the range of ~54–63 nm that were similar to the diameter of BC nanofibrils. The amount of ZnO into the BC pellicles was found to increase with increasing immersion time. A longer ultrasonic treatment time resulted in smaller crystalline size of the incorporated ZnO. The particle size, morphology and dispersion of the synthesized ZnO in the BC matrix were examined by transmission electron microscope and scanning electron microscope with inbuilt energy dispersive X-ray analysis. The mechanism of the formation of the nanocrystalline ZnO particles onto the BC nanofibrils was discussed. Moreover, the antibacterial activity of the nanocrystalline ZnO particle-incorporated BC sheet against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) was also evaluated.     

Synthesis of antibacterial cellulose materials using a “clickable” quaternary ammonium compound

Development of advanced functional materials from naturally abundant polymers such as cellulose are of significant importance. Of particular interest is embedding antibacterial functionality to cellulose materials to make permanent antibacterial materials and devices. In the present research, a “clickable” quaternary ammonium compound, N-(2-ethoxy-2-oxoethyl)-N,N-dimethylprop-2yn-1-aminium bromide (EdMPABr) was synthesized via a simple reaction with nearly stoichiometric yield and well characterized with 1D (¹H, ¹³C) and 2D (COSY, HSQC) NMR and ATR-FTIR. EdMPABr can be covalently bonded to many molecules containing an azido group to form non-leaching antibacterial materials via the simple Cu(I)-catalyzed alkyne-azide [2 + 3] cycloaddition reaction. As an example, EdMPABr was attached to our previously reported 3-O-azidopropoxypoly(ethylene glycol)-2,6-di-O-thexyldimethylsilyl cellulose (3-N₃PEG-2,6-TDMS cellulose, DS = 0.54 at C3 determined by ¹H NMR). Significant antibacterial activity of the synthesized 3-O-quaternary ammonium-2,6-di-O-thexyldimethylsilyl cellulose (3-QA-2,6-TDMS cellulose, DS = 0.30 at C3 determined by using N content from elemental analysis) was confirmed by testing against the representative bacteria Escherichia coli. By linking the EdMPABr to the honeycomb film of 3-N₃PEG-2,6-TDMS cellulose, the formed honeycomb film exhibited both antibacterial and antifouling properties. This research provides a simple and robust route towards the development of permanent antibacterial materials and biomedical devices.     

Bio-based thermostable, biodegradable and biocompatible hyperbranched polyurethane/Ag nanocomposites with antimicrobial activity

The enhanced thermal and antimicrobial activity of silver nanoparticles prompts their uses in many medical devices. Mesua ferrea L. seed oil based antimicrobial biocompatible hyperbranched and linear polyurethane/Ag nanocomposites have been prepared in dimethylformamide without using any extra reducing agent. Formation of the stable and well-dispersed Ag nanoparticles was confirmed by ultra violet, X-ray diffractometeric, transmission electron microscopic and Fourier transform infra-red spectroscopic analyses. The enhancement of properties like thermal stability by (46-53)°C and 42 °C, tensile strength to ∼170% and ∼180% for hyperbranched and linear polyurethanes respectively was observed by the formation of nanocomposites. The cytocompatibility test based on the inhibition of RBC hemolysis showed that the materials lack cytotoxicity. The nanocomposites showed biodegradability as conferred from the bacterial degradation. Dose dependent excellent antibacterial activity of the nanocomposites against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacteria and antifouling activity against Candida albicans was observed.     

UV Protective,Antioxidant, Antibacterial and Compostable Polylactic Acid Composites Containing Pristine and Chemically Modified Lignin Nanoparticles

Polylactic acid (PLA) films containing 1 wt % and 3 wt % of lignin nanoparticles (pristine (LNP), chemically modified with citric acid (caLNP) and acetylated (aLNP)) were prepared by extrusion and characterized in terms of their overall performance as food packaging materials. Morphological, mechanical, thermal, UV–Vis barrier, antioxidant and antibacterial properties were assayed; appropriate migration values in food simulants and disintegration in simulated composting conditions were also verified. The results obtained indicated that all lignin nanoparticles succeeded in conferring UV-blocking, antioxidant and antibacterial properties to the PLA films, especially at the higher filler loadings assayed. Chemical modification of the fillers partially reduced the UV protection and the antioxidant properties of the resulting composites, but it induced better nanoparticles dispersion, reduced aggregates size, enhanced ductility and improved aesthetic quality of the films through reduction of the characteristic dark color of lignin. Migration tests and disintegration assays of the nanocomposites in simulated composting conditions indicated that, irrespectively of their formulation, the multifunctional nanocomposite films prepared behaved similarly to neat PLA.     

Green synthesis of RGO-ZnO mediated Ocimum basilicum leaves extract nanocomposite for antioxidant,antibacterial, antidiabetic and photocatalytic activity

Green chemistry of nanomaterials from synthesis to diverse biomedical applications is a discussion of town in the current scientific scenario. In this work, Ocimum basilicum leaves extract was utilized as the reducing agent in the synthesis of ZnO nanoparticles. Green synthesized ZnO NPs mediated via Ocimum basilicum extract were decorated on the reduced graphene oxide (RGO) sheet by the simple one-step method. The prepared green synthesized RGO-ZnO nanocomposites (NCs) were characterized via the X-ray diffractometer. The average crystallite size of ZnO was 25 nm which confirmed the wurtzite hexagonal structure of ZnO. The scanning Electron Microscopy technique confirmed the spherical morphology of particle size of 31 nm. Further, Fourier Transform Infrared Spectroscopy confirms the Zn-O bond stretching in the RGO-ZnO NCs. Antioxidant activity of the green synthesized Ocimum basilicum ZnO NPs and RGO-ZnO NCs were performed by DPPH scavenging activities and found the dose-dependent. RGO-ZnO effectively inhibited the α-amylase and α-glucosidase for in vitro antidiabetic activities. Moreover, RGO-ZnO NCs showed the antibacterial potential with increasing concentration against the gram-positive (Cocci) and gram-negative (E. coli) bacterial strains. In Photocatalytic activity, the ZnO NPs and RGO-ZnO NCs were utilized as the catalyst and degraded the Rh-B dye 91.4% and 96.7% under UV–visible light. Overall, RGO-ZnO NCs showed better results in antibacterial, antidiabetic activity as well as photocatalytic activity against the pure ZnO NPs. Hence, RGO-ZnO nanocomposites have demonstrated the opportunity to be an entrancing material for photocatalysis and biological studies.     

Microwave-assisted solution synthesis and photocatalytic activity of Ag nanoparticles supported on ZnO nanostructure flowers

Ag nanoparticles supported on the surface of three-dimensional (3D) flower-like ZnO nanostructure were synthesized by a microwave-assisted solution method. The obtained products were characterized by X-ray diffraction analysis, field-emission scanning electron microscopy, Fourier-transform infrared spectroscopy, Raman spectrophotometry, X-ray photoelectron spectroscopy, and photoluminescence spectroscopy. The analytical results confirmed homogeneously distributed Ag nanoparticles supported on the surface of flower-like ZnO nanostructure. The photocatalytic effect of the heterostructure Ag/ZnO nanocomposites was investigated using photodegradation under ultraviolet (UV) light of methylene blue as model dye. The heterostructure Ag/ZnO nanocomposites exhibited much higher photocatalytic activity than pure ZnO flowers. The improved photocatalytic properties are attributed to formation of a Schottky barrier at the metal–semiconductor interface of the Ag/ZnO nanocomposites.     

银/聚合物纳米复合材料

银/聚合物纳米复合材料是一种典型的聚合物基复合材料, 其结构和性能依赖于合成方法,因此开发材料的优异性能必须以深入研究纳米材料的先进合成技术为前提。本文综述了纳米银粒子及其与聚合物形成的纳米复合材料的最新合成进展, 重点介绍了基于液相化学还原方法合成纳米银粒子的新方法, 如溶胶-凝胶法、沉淀法、微乳液法和离子液体法, 以及纳米银粒子的分散技术和原位法合成银/聚合物纳米复合材料的新技术, 并介绍了纳米银复合材料的电绝缘性、表面增强拉曼散射性能、抗菌性及其在生物医学等领域中的应用。