The impact of physiological buffer solutions on zinc oxide nanostructures: zinc phosphate conversion

Zinc oxide (ZnO) nanostructures have been widely used in biosensor applications. However, little attention has been given to the interaction of ZnO structures with physiological buffer solutions. In the present work, it is shown that the use of buffers containing phosphate ions leads to the modification of the ZnO tetrapodal micro/nanostructures when immersed in such solutions for several hours, even at the physiological pH (7.4). ZnO samples designed to be used as transducers in biosensors were immersed in phosphate buffers for several durations at pH = 5.8 and pH = 7.4. Their detailed morphological, structural and optical characterization was carried out to demonstrate the effect of the ZnO interaction with the phosphate ions. The pH had an important role in the ZnO conversion into zinc phosphate, with lower pH promoting a more pronounced effect. After 72 h and at pH = 5.8, a significant amount of the ZnO structures were converted into crystalline zinc phosphate, while immersion during the same time at pH = 7.4 resulted predominantly in amorphous zinc phosphate particles mixed with the original ZnO tetrapods. Photoluminescence spectra show remarkable changes with prolonged immersion times, particularly when the luminescence of the sample was investigated at 14 K. These findings highlight the importance of a careful analysis of the sensing results when phosphate-based buffer solutions are in contact with the ZnO transducers, as the changes observed on the transduction signal during sensing experiments may also comprise a non-negligible contribution from a phosphate-induced transformation of ZnO, which can hamper an accurate assessment of the sensing behavior.     

Physicochemical and photocatalytic properties of the ZnO particles synthesized by two different methods using three different precursors

ZnO particles with different morphological forms and various scale sizes were successfully synthesized as photocatalysts using two different methods (sol–gel and precipitation) and three precursors (zinc acetate dihydrate, zinc nitrate hexahydrate, and zinc sulfate heptahydrate). These materials were calcined at 500 °C for 3 h and characterized by various physicochemical techniques such as X-ray diffraction, Fourier transform infrared, transmission electron microscopy, S_BET, and UV–vis diffuse reflectance. The results showed that the crystalline structure, size, and morphology of the ZnO particles are strongly influenced by the preparation method and by the nature of the precursor used as reactant. The photocatalytic efficiency of the synthesized photocatalysts was evaluated by the photodegradation of methyl orange in aqueous solution under UV-A light. The results showed that the ZnO nanoparticles prepared the by sol–gel method from zinc acetate are more efficient than those prepared by the precipitation method.     

Preparation of ZnO colloids by aggregation of the nanocrystal subunits

Colloidal ZnO particles with narrow size distribution were prepared via a sol-gel process by base-catalyzed hydrolysis of zinc acetate. The morphology of ordered arrays of the particles was recorded by SEM. SEM also reveals that these uniform particles were composed of tiny ZnO subunits (singlets) sized of several nanometers. The size of the singlets, which is confirmed by X-ray diffraction and UV-vis absorption spectra, increases as the aging time is prolonged. The size-selective formation of colloids by aggregation of nanosized subunits is proposed to consist of two-stage growth by nucleation of nanosized crystalline primary particles and their subsequent aggregation into polycrystalline secondary colloids. The aggregates are all spherical because the internal rearrangement processes are fast enough. The ZnO colloids, i.e., the aggregates, tend to self-assemble into well-ordered hexagonal close-packed structures. Room-temperature photoluminescence was characterized for green and aged ZnO.     

ZnO/MgO nanocomposites generated from alcoholic solutions

A process was proposed for the synthesis of ZnO/MgO nanocomposites from alcoholic solutions by means or the consecutive precipitation of coprecipitation of alcoholic solutions of zinc acetate and magnesium with an alkali solution followed by annealing in the range 400–500°C. X-ray powder diffraction showed crystalline ZnO and MgO phases in the resulting composite. Zinc oxide particle sizes in the composite with magnesium oxide were determined by transmission electron microscopy and from X-ray diffraction peak broadening. The zinc oxide nanoparticle size was weakly affected by the molar ratio of zinc to magnesium and the concentration of the precipitated component. The ZnO exciton peak in cathodoluminescence spectra for nanocomposites synthesized at low temperatures (400 and 500°C) shifted toward the UV. At ≥600°C or higher, Mg_{1 ? x} Zn _x O solid solution was generated, as evidenced by X-ray diffraction and cathodoluminescence data.     

Effect of γ-irradiation on the growth of ZnO nanorod films for photocatalytic disinfection of contaminated water

The growth of ZnO nanorods on a flat substrate containing γ-irradiated seeds and their ability to photocatalytically eliminate bacteria in water were studied. The seed layer was obtained, by the spray pyrolysis technique, from zinc acetate solutions γ-irradiated within the range from 0 to 100 kGy. Subsequently, to grow the rods, the seeds were immersed in a basic solution of zinc nitrate maintained at 90 °C. The rate of crystal growth on the seed layer during the thermal bath treatment was kept constant. The resulting materials were characterized morphologically by scanning electron and atomic force microscopies; X-ray diffraction was used to study their morphology and structure and ultraviolet-visible spectroscopy to determine their absorbance. The obtained seed films were morphologically dependent on the radiation dose and this was correlated with the ZnO nanorod films which presented a texture in the (002) direction perpendicular to the substrate. The rods have a hexagonal mean cross section between 20 and 140 nm. Using these rods, the photocatalytic degradation of Escherichia coli bacteria in water was studied; a positive influence of the crystalline texture on the degradation rate was observed.     

The effect of surface properties on visible luminescence of nanosized colloidal ZnO membranes

Luminescence properties of nanosized zinc oxide (ZnO) colloids depend greatly on their surface properties, which are in turn largely determined by the method of preparation. ZnO nanoparticles in the size range from 3 to 9 nm were prepared by addition of tetramethylammonium hydroxide ((CH3)4NOH) to an ethanolic zinc acetate solution. X-ray diffraction (XRD) indicates nanocrystalline ZnO membranes with polycrystalline hexagonal wurtzite structure. The ZnO membranes have a strong visible-emission intensity and the intensity depends upon hydrolysis time. The infrared spectra imply a variety of forms of zinc acetate complexes present on the surface of ZnO particles. The effect of the ZnO membrane surface properties on photoluminescence is discussed.     

In situ synthesis of ZnO nanocrystal/PET hybrid nanofibers via electrospinning

Hybrid nanofibers of ZnO precursors/PET were fabricated by electrospinning a nonaqueous poly(ethylene terephthalate) (PET) solution containing zinc acetate dihydrate. Scanning electron microscopy images showed that the as prepared nanofibers had smooth and uniform surfaces, and the diameter was decreased with increasing zinc acetate dihydrate content and reducing PET concentration. After the treatment by a mild process of immersing the fibers in ammonia‐ethanol mixtures (pH ≈ 9–11), the surface of the nanofibers became rough during the formation of ZnO nanocrystals in the fibers. High resolution transmission electron microscopy images showed that the mean particle size became smaller with increasing diameter of the polymer fibers and decreasing content of ZnO. Fourier transform infrared spectra confirmed the ZnO formation in the hybrid nanofibers. X‐ray diffractometry patterns indicated that ZnO had the Wurtzite structure. The formation and growth of ZnO nanocrystals in the nanofiber matrices was also influenced by the various other parameters, that is, the pH value of the reaction solution, the content of zinc acetate dihydrate within the fibers, the reaction time and temperature. Photoluminescence spectra under excitation at 300 nm revealed a broad and intense ultraviolet emission. The UV‐visible diffuse reflectance spectra demonstrated the blue shift in the absorbance curve, which was ascribed to the quantum confinement effects of ZnO nanoparticles in the hybrid materials. These hybrid nanofibers can potentially be used in light emitters, chemical sensors, photo‐catalysts and solar cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1360–1368, 2011     

Micropatterning of ZnO nanoarrays by forced hydrolysis of anhydrous zinc acetate

Micropatterns of ZnO nanoarrays were simply and successfully fabricated in an aqueous solution without any high-temperature treatment and/or expensive catalyst. In situ forced hydrolysis of patterned anhydrous zinc acetate, derived by ultraviolet irradiation with a photomask, resulted in heterogeneous nucleation and growth to form ZnO nanoarrays. Micropatterns of ZnO nanoarrays were characterized by FE-SEM and XRD. ZnO nanoarrays were well site-selectively deposited on anhydrous zinc acetate coated regions at 88 degrees C. HR-TEM clarified the formation mechanism in which anhydrous zinc acetate showed a tendency of forced hydrolyzation to ZnO nanocrystals at the initial stage in the reaction solution.     

TEMPO氧化和高频超声下埃米级厚度纤维素纳米纤丝的制备

通过不同TEMPO氧化体系对商品竹浆进行氧化处理,经高频超声纳米纤丝化后,可以制得长度在数百纳米,宽度小于5.0 nm,厚度仅为几个埃的纤维素纳米纤丝(TEMPO-oxided cellulose nanofibrils,TOCNs).这种纳米带状(nanostrip)的TOCNs是由纤维素片层构成的.本文通过场发射扫描电子显微镜(FE-SEM)探究了原料和2组TOCNs样品的形貌变化,利用透射电子显微镜(TEM)和原子力显微镜(AFM)对2组TOCNs样品的三维尺寸(长、宽、厚)进行测量统计.通过不同氧化体系产物的TOCNs三维尺寸差异,并结合傅里叶红外吸收光谱(FTIR)、X射线衍射(XRD)及交叉极化和魔角旋转13C固态核磁共振光谱(CP/MAS 13C-NMR)揭示了不同氧化体系对纤维素Iβ层内氢键及长轴方向的作用机理.     

Preparation and characterization of nanocomposite ZnO–Ag thin film containing nano-sized Ag particles: influence of preheating,annealing temperature and silver content on characteristics

Nanocomposite ZnO–Ag thin film containing nano-sized Ag particles have been grown on glass substrate by spin-coating technique using zinc acetate dihydrate as starting precursor in 2-propanol as solvent and monoethanolamine as stabilizer. Silver nanoparticles were added in the ZnO sol using silver nitrate dissolved in ethanol-acetonitrile. Their structural, electrical, crystalline size and optical properties were investigated as a function of preheating, annealing temperature and silver content. The results indicated that the crystalline phase was increased with increase of annealing temperature up to 550 °C at optimum preheating temperature of 275 °C. Thermal gravimetric differential thermal analysis results indicated that the decomposition of pure ZnO and nanocomposite ZnO–Ag precursors occurred at 225 and 234 °C, respectively with formation of ZnO wurtzite crystals. The scanning electron microscopy and atomic force microscopy revealed that the surface structure (the porosity and grain size) of the ZnO–Ag thin film (the film thickness is about 379 nm) was changed compared to pure ZnO thin film. The result of transmission electron microscopy showed that Ag particles were about 5 nm and ZnO particles 58 nm with uniform silver nanoclusters. Optical absorption results indicated that optical absorption of ZnO–Ag thin films decreased with increase of annealing temperature. Nanocomposite ZnO–Ag thin films with [Ag] = 0.068 M and [Ag] = 0.110 M showed an intense absorption band, whose maximum signals appear at 430 nm which is not present in pure ZnO thin films. The result of X-ray photoelectron spectroscopy revealed that the binding energy of Ag 3d_5/2 for ZnO–Ag shifts remarkably to the lower binding energy compared to the pure metallic Ag due to the interaction between Ag and ZnO.     

Mechanistic investigations of PEG-directed assembly of one-dimensional ZnO nanostructures

Mechanistic investigation on spherical assembly of the unique one-dimensional ZnO nanorods, solid nanocones, or hollow prisms with the closed -c end, directed by poly ethylene glycol (PEG) with different molecular weights, has been carried out using spectroscopic methods. The single crystalline ZnO nanoprisms, hollow along the c axis but closed at the -c end, aggregate to urchin-type globules in the microscale when PEG 2000 is used as directing reagent, while spherical aggregates of single crystalline ZnO nanocones are obtained under the direction of PEG 200. Studies reveal that both the PEG molecules aggregate to globules by interacting with zinc species in suitable solvents and englobe the zinc species. By the short time of ultrasonic pretreatment on the solution, a kind of flagellum structure is induced around the globules, in long tubular shapes for PEG 2000 but as shorter wedges for PEG 200. The globules with flagellums are templates for the assembly of the ZnO nanotubes or ZnO nanocones in the hydrothermal treatment. The tiny ZnO crystallites, produced in the hydrothermal process, stack to the templates and amalgamate to single crystalline nanotubes or nanocones, similar to the oriented attachment mechanism. The PEG 2000 template is included in the ZnO cavity of nanotubes, while PEG 200 is excluded from the ZnO nanocones due to the different intertwist properties between the two PEG molecules. Both the urchin-type assemblies, possessing the same external crystalline plane, compose a isotropic powder and emit very strong yellow light, centered at approximately 2.1 eV, under the excitation of the He-Cd laser at 325 nm, which has been correlated to the specific crystal plane. The special powders will be easily coated onto any type of surface for the decoration of a large area of surfaces for future applications.     

Controllable one-step synthesis of ZnO nanostructures using molybdophosphoric acid

ZnO nanostructures were synthesised in a hydrothermal reaction of zinc acetate in the presence of molybdophosphoric acid (H₃[PMo₁₂O₄₀]) as well as its vanadium-substituted acid (H₄[PMo₁₁VO₄₀]) at various times, temperatures, and concentrations. The ZnO nanostructures were characterised by X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. The results demonstrated that the synthesised products are crystalline with a zincite hexagonal phase. Various ZnO nanostructures, such as nanoparticles, microrods, and nanosheets, were produced by changing the experimental conditions. The photocatalytic degradation of methyl orange was also investigated using the ZnO nanoparticles thus prepared. These particles exhibited high performance in the photocatalytic degradation of MO and almost 100 % decolourisation occurred within only 20 min.     

Formation of amorphous zinc citrate spheres and their conversion to crystalline ZnO nanostructures

We report a method for synthesizing zinc citrate spheres at a low temperature (90 °C) under normal atmospheric pressure. The spherical structures were amorphous and had an average diameter of ～1.7 μm. The amorphous zinc citrate spheres could be converted into crystalline ZnO nanostructures in aqueous solutions by heating at 90 °C for 1 h. By local dissolution of the zinc citrate spheres, nucleation and growth of ZnO occurred on the surfaces of the amorphous zinc citrate spheres. The morphologies and exposed crystal faces of the crystalline ZnO nanostructures (structure I: oblate spheroid; structure II: prolate spheroid; structure III: hexagonal disk; structure IV: sphere) could be controlled simply by varying the solution composition (solutions I, II, III, or IV) in which the as-prepared amorphous zinc citrate spheres were converted. The concentration of citrate anions and solution pH played a decisive role in determining the morphologies and exposed crystal faces of the crystalline ZnO nanostructures. On the basis of experimental results, we propose a plausible mechanism for the conversion of amorphous zinc citrate spheres into the variety of observed ZnO structures.     

Controlled organization of ZnO building blocks into complex nanostructures

ZnO complex nanostructure with special mushroom-like morphology was prepared by hydrolysis of zinc acetate dehydrate (Zn(CH3COO)2 2H2O) in water-methanol mixed solvent at 60 degrees C. The formation mechanism was studied using XRD investigation and FE-SEM observation, which showed that the mushroom-like particles were transformed from cauliflower-like layered basic zinc acetate (LBZA), Zn5(OH)8(CH3COO)22H2O, and composed of ZnO subunits with average size less than 10 nm. The introduction of hexamethylenetetramine (HMTA, C6H12N4) to the solution before deposition led to drastic changes in the morphologies of both aggregation particles and ZnO subunits. The novel ZnO microspheres, which were made of regular hexagonal plate-like ZnO with dimensional size 35 x 10 nm, were formed. These hexagonal plate-like ZnO subunits stacked very compactly and aligned regularly. Kinetic study of this unique complex nanostructure using TEM and FE-SEM observation showed the presence of HMTA played an important role on the formation of hexagonal ZnO subunits through different mechanisms related to the different parts of microspheres.     

溶剂热法制备六角锥形ZnO及其光致发光性能

通过乙酸锌和醇溶液反应得到了六角锥形纳米ZnO颗粒, 反应过程中不使用碱溶液和表面活性剂. 利用透射电子显微镜(TEM)、选区电子衍射(SAED)及扫描电子显微镜(SEM)对其形貌和结构进行了表征分析. 结果表明, 此方法制备的ZnO颗粒为单晶, 而且六角锥形ZnO的室温光致发光谱(PL)在378 nm处显示出了单纯的紫外发射峰, 而不是通常报道的可见光区发射, 这也预示着这种特殊结构的纳米ZnO将会成为一种具有良好应用前景的光学材料.     

超声振荡直接沉淀法制备纳米ZnO的工艺研究

在超声振荡下直接沉淀法制备纳米ZnO的关键是控制硝酸锌的浓度、氨水和硝酸锌的配比,以及前驱化合物的焙烧温度、表面活性剂的种类以及加入时间。实验结果表明,用该法制备纳米ZnO,硝酸锌的初始浓度在0.7～1.0 mol/L,氨水和硝酸锌配比为1.0～1.2,在反应10 min后加入表面活性剂油酸钠,15 min后加入聚乙二醇1000,可制备得到30～60 nm的纳米ZnO。     

High Photocatalytic Properties of Zinc OxideNanoparticles with Amidoximated BacterialCellulose Nanofibers as Templates简

The freshly prepared water-wet amidoximated bacterial cellulose （Am-BC） serves as an effective nanoreactor to synthesis zinc oxide nanoparticles by in situ polyol method. The obtained ZnO/Am-BC nanocomposites have been characterized by field emission scanning electron microscopy （FE-SEM）, X-ray diffraction （XRD）, Fourier transformed infrared spectroscopy （FTIR） and thermogravimetric analysis （TGA）. The influence of the zinc acetate concentration on the morphologies and size ofZnO nanoparticles and the possible formation mechanism were discussed. The results indicated that uniform ZnO nanoparticles were homogeneously anchored on the Am-BC nanofibers through strong interaction between the hydroxyl and amino groups of Am-BC and ZnO nanoparticles. The loading content of ZnO nanoparticles is higher using Am-BC as a template than using the unmodified bacterial cellulose. The resultant nanocomposite synthesized at 0.05 wt% shows a high photocatalytic activity （92%） in the degradation of methyl orange.     

Structures and optical properties of Zn1?x Ni x O nanoparticles by coprecipitation method

Nanocrystals of undoped and nickel-doped zinc oxide (Zn_1?x Ni _x O, where x?=?0.00?C0.05) were synthesized by the coprecipitation method. Crystalline size, morphology, and optical absorption of prepared samples were determined by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), and UV?Cvisible spectrometer. XRD and SEM studies revealed that Ni-doped ZnO crystallized in hexagonal wurtzite structure. Doping of ZnO with Ni²⁺ was intended to enhance the surface defects of ZnO. The incorporation of Ni²⁺ in place of Zn²⁺ provoked an increase in the size of nanocrystals as compared to undoped ZnO. Crystalline size of nanocrystals varied from 10 to 40?nm as the calcination temperature increased. Enhancement in the optical absorption of Ni-doped ZnO indicated that it can be used as an efficient photocatalyst under visible light irradiation. Optical absorption measurements indicated a red shift in the absorption band edge upon Ni doping. The band gap value of prepared undoped and Ni-doped ZnO nanoparticles decreased as annealing temperature was increased up to 800?°C.     

纳米氧化锌的机械力化学表面改性

采用机械力化学表面改性工艺,以硬脂酸为改性剂,在气流粉碎机中对纳米氧化锌进行解团聚和表面改性,并借助SEM、XRD、FF—IR和XPS对改性前后的氧化锌粉体进行结构表征．结果表明：硬脂酸分子化学键合在氧化锌表面．改性前后氧化锌的晶体结构相同,其颗粒的团聚性降低,二次粒径明显减小．通过测定改性样品的活化指数和亲油化度,选择最佳的改性剂用量为氧化锌质量的10％,氧化锌表面亲油疏水,在有机溶剂中有较好的分散性．     

Spherical Zinc Oxide Nano Particles from Zinc Acetate in the Precipitation Method

The liquid precipitation method using zinc acetate dihydrate was applied for the synthesis of uniform and spherical ZnO nanoparticles. The ultrafine zinc oxid was prepared in a water‐ethanol mixture solution. The solution containing zinc cation was soluble in water. The surface‐active agent triethanolamine (TEA) was soluble in ethanol. Then alkali precipitated by adding n‐propylamine. The spherical zinc oxide particle morphology was found to be highly dependent on the zinc salt concentration, ethanol‐water ratio, and the surface‐active agent additive. The process can produce white ZnO powder of 50–90 nm in size. The morphology of zinc oxide showed a powder shape by transmission electron microscopy (TEM), the crystallization phase structure of zinc oxide by X‐ray diffraction (XRD), and the zinc oxide remaining by using an organic analysis by infrared spectroscopy (IR).