Effect of Degree of Deacetylation of Chitosan/Chitin on Human Neural Stem Cell Culture

Stem cell therapy and research for neural diseases depends on reliable reproduction of neural stem cells. Chitosan-based materials have been proposed as a substrate for culturing human neural stem cells (hNSCs) in the pursuit of clinically compatible culture conditions that are chemically defined and compliant with good manufacturing practices. The physical and biochemical properties of chitosan and chitin are strongly regulated by the degree of deacetylation (DD). However, the effect of DD on hNSC behavior has not been systematically investigated. In this study, films with DD ranging from 93% to 14% are fabricated with chitosan and chitin. Under xeno-free conditions, hNSCs proliferate preferentially on films with a higher DD, exhibiting adherent morphology and retaining multipotency. Lowering the DD leads to formation of neural stem cell spheroids due to unsteady adhesion. The neural spheroids present NSC multipotency protein expression reduction and cytoplasmic translocation. This study provides an insight into the influence of the DD on hNSCs behavior and may serve as a guideline for hNSC research using chitosan-based biomaterials. It demonstrates the capability of controlling hNSC fate by simply tailoring the DD of chitosan.     

Crosslinking of chitosan fibers with dialdehydes: Proposal of a new reaction mechanism

A highly deacetylated chitosan from shrimp with a degree of deacetylation of 95.28 ± 3.03% was prepared and spun into a monofilament fiber using a solution of 4% (w/v) chitosan in 4% (v/v) aqueous acetic acid. Samples of the spun fibers were immersed in aqueous solutions containing glutaraldehyde and glyoxal, and subsequently washed and dried. When the concentration of crosslinking agent was varied at room temperature over a constant time of 1 h, dry mechanical properties improved up to a point after which increasing concentrations resulted in degradation. Immersion time was also varied between 1 and 60 min at 25.8°C, and temperature was varied between 25.8 and 70.0°C, at fixed concentrations of both glyoxal and glutaraldehyde. It was demonstrated that mechanical improvements might be rendered at higher temperatures over lesser times. However, it was also shown that at higher temperatures, fiber mechanical properties would begin to diminish. Chitosan films were subjected to similar treatments in aqueous crosslinking solutions. Fourier transform infrared data (FTIR) on the films suggest that some interaction is occurring between the glutaraldehyde or glyoxal and the amine group on the chitosan backbone. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1079–1094, 1999     

Enhanced functional properties of chitosan films cross-linked by biosourced dicarboxylic acids

Chitosan-based films were developed using different biosourced dicarboxylic acid solutions (succinic acid, adipic acid, suberic acid and sebacic acid). The effect of incorporating these nontoxic solutions on water vapor barrier, tensile and antimicrobial properties of chitosan films was evaluated. Fourier Transform Infrared (FTIR) and cross polarization magic angle spinning (CP/MAS) nuclear magnetic resonance (NMR) analyses were also performed to investigate functional groups interactions between chitosan and dicarboxylic acids. Acetic acid-chitosan films showed significantly higher water vapor permeability (WVP) and lower tensile strength (TS) and elongation at break (%E) than dicarboxylic acid-prepared films (p < 0.05). Using either adipic acid or suberic acid solutions to fabricate chitosan films reduced WVP by 85% and enhanced TS by 21 to 27% and %E by more than 60% when compared with the acetic acid-prepared films. Chitosan films modified with either adipic acid or suberic acid exhibited antimicrobial activity against all tested microorganisms.     

Direct-write,Well-aligned Chitosan-Poly(ethylene oxide) Nanofibers Deposited via Near-field Electrospinning

A continuous near-field electrospinning (NFES) process has been demonstrated to be able to achieve direct-write and well-aligned chitosan/poly(ethylene oxide) nanofibers. The ability to precisely control and deposit chitosan-based nanofibers in a direct-write manner is favorable in manipulating cells attachment and proliferation at a preferred position. Experimental results show that fiber diameters can be reliably controlled in the range of 265–1255 nm by adjusting various operating parameters of the NFES processes. These prescribed patterns of nanofibers exceed tens of centimeters long and complex configurations such as grid arrays and arc shapes are assembled at specified separations as small as 5 μm. FTIR analysis reveals that NFES nanofibers have a similar morphology and composition as conventional electrospinning counterpart and constitute all components formerly present in the polymer solution. The versatile functionality to fabricate chitosan-based nanofibers with controllable size and directional alignment as well as highly ordered and customized patterns may represent an ideal candidate of a functional biomaterial and in tissue-engineering scaffolds that are predominantly representative of extracellular matrix (ECM).     

Improvement of dermal burn healing by combining sodium alginate/chitosan-based films and low level laser therapy

This paper aimed to evaluate the improvement of burn wounds healing by sodium alginate/chitosan-based films and laser therapy. Natural polymers with different biological activities are widely used as film dressings to improve wound healing. Lasers arrays accelerate the healing repair of soft tissue injuries. Burn procedures were performed on the backs of 60 male rats assigned into six groups: untreated (CTR), dressed with cellulose films (CL), dressed with sodium alginate/chitosan-based films (SC), laser-irradiated undressed wounds (LT), laser-irradiated wounds with cellulose (CLLT) and sodium alginate/chitosan-based films (SCLT). Laser therapy was applied for 7 days. Animals of each group were euthanised 8 and 14 days after the burn procedures. The inflammatory reaction was significantly more intense in the CTR group than in the irradiated groups after 8 and 14 days. Laser therapy stimulated myofibroblastic differentiation in 8 days, with or without dressing films. Combined laser therapy and both dressings improved epithelisation, blood vessels formation and collagenization, promoted rapid replacement of type III for type I collagen and favored the better arrangement of the newly formed collagen fibres. The combination of laser therapy and sodium alginate/chitosan-based dressing improves burn healing, apparently by modulating the epithelisation, blood vessels formation and collagenization processes.     

Controlled deposition of structured polymer films: chemical and rheological factors in chitosan film formation

The technique of "spread coating" has been used to create thin films from solutions of deacetylated and butyl-modified chitosan polymer, and the effect of deposition rate on film thickness has been characterized. Results show that films of controlled thickness can be reproducibly produced and that hydrophobic modification of the polymer can extend the range over which a linear response between film thickness and deposition rate is achieved. Viscometry and fluorescence spectroscopy were also employed to characterize the micellar characteristics of solutions of both deacetylated and butyl-modified chitosan polymer. Although both deacetylated and butyl-modified chitosan solutions were found to have inter- and intramolecular interactions, as well as hydrophobic domains able to incorporate fluorophores, deacetylated chitosan was found to be more interconnected via intermolecular interactions at higher concentrations. These results are important as having the ability to understand how the introduction of hydrophobic modification, a technique shown to introduce solution-based micelle structure and micellar aggregates that support enzyme immobilization, affects film thickness and morphology of spread coated thin films will aid the long-term development and deployment of chitosan-based biofuel cell electrodes.     

The study of the interaction between chitosan and 2,2-bis(hydroxymethyl)propionic acid during solid-phase synthesis

New polymer salts and N-acetylated chitosan derivatives are prepared in an extruder by the method of solid-phase synthesis via the interaction of chitosan and 2,2-bis(hydroxymethyl)propionic acid. The effect of the initial component ratio and temperature on the yield and structure of the target products is studied. Joint deformation of solid components at room temperature is found to cause the quantitative formation of salt bonds between carboxylic groups of the acid and amino groups of chitosan. At elevated temperatures of synthesis, the corresponding acetylated derivatives with a degree of substitution of amino groups varying from 0.16 to 0.43 are prepared. The relaxation and phase transitions in the polymer salts and acetylated chitosan derivatives and their sorptional activity are studied. The films prepared from aqueous solutions of the new salt modification of chitosan are characterized by a homogeneous structure and improved mechanical characteristics relative to those of the films based on chitosan acetates. An additional thermal treatment of the products of the solid-phase synthesis leads to the formation of crosslinked and water-swollen materials that can be used for the development of novel polymeric chitosan-based membranes and sorbents.     

Preparation and optical–electrical properties of Al-doped ZnO films

Among the various semiconducting metal oxide materials, ZnO thin films are highly attractive in the development of materials area. In this paper, Al-doped ZnO thin films were prepared by sol–gel dipping and drawing technology and their composition, structure and optical–electrical properties were investigated. XRD results shows that the Al-doped ZnO thin film is of polycrystalline hexagonal wurtzite structure, and the (002) face of the thin film has the strongest orientation at the annealing temperature of 550 °C. The surface resistance of Al-doped ZnO thin film firstly drops and then increases with the increase in annealing temperature. Al doping concentration is also an important factor for improving the conductivity of modified ZnO thin films, and the surface resistance has the tendency to drop at first and then to increase when the Al concentration is increasing. The surface resistance of modified ZnO thin films drops to the lowest point of 139 KΩ sq^?1 when the Al concentration is 1.6 at% and the annealing temperature is 500 °C. The light transmission measurements show that the doping concentration has little influence on light transmittance. The transmittance at the visible region of films is all over 80 %, and the highest value is up to 91 %.     

Determination of Hyaluronic Acid in a Chitosan-Based Formulation by RP C18 and HILIC LC–ESI-MS: an Evaluation of Matrix Effect

Two simple and fast C18 and HILIC liquid chromatography–electrospray mass spectrometry methods for the determination of hyaluronic acid (HA) in a mucoadhesive chitosan-based formulation were developed and validated. The performances of both methods were compared in terms of validation parameters and matrix effect. A simple sample preparation method based on sulphuric acid-based degradation was optimized for the detection of HA fragments (i.e. m/z 380 2-mer, m/z 759 4-mer, m/z 1,138 8-mer and m/z 1,518 16-mer). By operating under selected ion-monitoring mode, excellent selectivity towards chitosan fragments was obtained. For validation, good linearity, detection limits (<4 μg mL⁻¹) and precision (RSD % < 16 %) were generally obtained on matrix with both columns. However, HILIC column exhibited improved performances in terms of HA fragment separation and selectivity. By analyzing on the C18 column the chitosan-based formulation and sample extracts from pig mucosa treated with the formulation, matrix effects exhibited a dependence of signal suppression degree (ranging from 37 to 83 %) as a function of the HA fragment dimension. The HILIC column afforded instead a significantly reduced suppression degree (ranging from 1 to 16 %) and a better separation. These findings demonstrated the improved performances of the HILIC column with respect to conventional C18 mechanism for the analysis of HA fragments in complex matrices.

     

Determination of Hyaluronic Acid in a Chitosan-Based Formulation by RP C18 and HILIC LC–ESI-MS: an Evaluation of Matrix Effect

Two simple and fast C18 and HILIC liquid chromatography–electrospray mass spectrometry methods for the determination of hyaluronic acid (HA) in a mucoadhesive chitosan-based formulation were developed and validated. The performances of both methods were compared in terms of validation parameters and matrix effect. A simple sample preparation method based on sulphuric acid-based degradation was optimized for the detection of HA fragments (i.e. m/z 380 2-mer, m/z 759 4-mer, m/z 1,138 8-mer and m/z 1,518 16-mer). By operating under selected ion-monitoring mode, excellent selectivity towards chitosan fragments was obtained. For validation, good linearity, detection limits (<4 μg mL^?1) and precision (RSD % < 16 %) were generally obtained on matrix with both columns. However, HILIC column exhibited improved performances in terms of HA fragment separation and selectivity. By analyzing on the C18 column the chitosan-based formulation and sample extracts from pig mucosa treated with the formulation, matrix effects exhibited a dependence of signal suppression degree (ranging from 37 to 83 %) as a function of the HA fragment dimension. The HILIC column afforded instead a significantly reduced suppression degree (ranging from 1 to 16 %) and a better separation. These findings demonstrated the improved performances of the HILIC column with respect to conventional C18 mechanism for the analysis of HA fragments in complex matrices.     

Synthesis of regenerated bacterial cellulose-zinc oxide nanocomposite films for biomedical applications

Regenerated bacterial cellulose (RBC) composites with zinc-oxide nanoparticles (ZnO) were prepared using a new strategy for enhanced biomedical applications of BC. Powdered BC was dissolved in N-methylmorpholine-N-oxide, and different concentrations of ZnO nanoparticles were mixed into the BC solution. RBC, RBC-ZnO1 (1 % ZnO) and ZnO-RBC2 (2 % ZnO) nanocomposite films were prepared by casting the solutions through an applicator. FE-SEM images confirmed the structural features and impregnation of the RBC films by nanoparticles. XRD analysis indicated the presence of specific peaks for RBC and ZnO in the composites. The RBC nanocomposites were found to have greatly enhanced thermal, mechanical and biological properties. Specifically, the degradation temperatures were improved from 334 °C for RBC to 339 and 344 °C for RBC-ZnO1 and RBC-ZnO2, respectively. The mechanical strength and Young’s modulus of the composites were also higher than those of pure RBC. The greatly improved antibacterial properties of the RBC-ZnO nanocomposites are the most striking feature of the present study. The bacterial growth inhibition measured for the RBC was zero, but reached up to 34 and 41 mm for RBC-ZnO1 and RBC-ZnO2, respectively. In addition to their antibacterial properties, the RBC-ZnO nanocomposites were found to be nontoxic and biocompatible with impressive cell adhesion capabilities. These RBC-ZnO nanocomposites can be used for different biomedical applications and have the potential for use in bioelectroanalysis.     

Structural and electrical properties of Li doped ZnO under Ar/H2 atmosphere

Thin films of ZnO were grown by the sol–gel method using spin-coating technique on (0001) sapphire substrates. The effect of doping under Ar/H₂ atmosphere on the structural and electrical properties of ZnO was investigated by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), I–V characterization, Hall effect and micro-photoluminescence. The films that were annealed at 600 °C in Ar/H₂ (95/5) % atmosphere showed (002) a predominant orientation. The crystalline nature of 2 mol.  % of Li doped films were better when compared to 1 mol.  % of Li doped films. The incorporation of Li in ZnO lattice was confirmed by X-ray photoelectron spectroscopy, and micro-photoluminescence. Hall effect measurements and I–V characterization of the Li doped ZnO thin films exhibited a better p-type behavior.     

Facile synthesis of spray pyrolyzed ZnO/NiO nanocomposites thin films

Abstract

This study reviews ZnO, NiO, and ZnO/NiO nanocomposites thin films deposition using the Spray Pyrolysis Technique (S.P.T). The thin films were deposited onto ordinary glass substrates heated at 500?°C from aqueous solutions of zinc chloride and nickel chloride precursors dissolved in distilled water. The structural, morphological, and optical properties of the ZnO, NiO, and ZnO/NiO thin films have been studied by X-ray diffraction, scanning electron microscopy, Raman spectroscopies, and so on. The optical band gaps are 3.3 and 3.5?eV for ZnO and NiO thin films, respectively obtained by UV–Vis spectroscopy. However, the optical band gaps of ZnO/NiO nanocomposites thin films, are noticeable out of the range (3.4–3.64?eV).     

Determination of Catechol by a Novel Laccase Biosensor Based on Zinc-Oxide Sol-Gel

A biosensor was fabricated by incorporating laccase in a ZnO sol-gel with chitosan as a matrix for the determination of catechol. The ZnO nanoparticles were characterized by X-ray diffraction and atomic force microscopy. The conductivity of the chitosan/ZnO/glassy carbon electrode film was investigated by alternating current impedance. The biosensor was employed to monitor the reduction of catechol, and the peak current increased linearly with concentration between 1.0 × 10^?6 and 1.0 × 10^?4 mole per liter with a limit of detection of 2.9 × 10^?7 mole per liter. The laccase biosensor exhibited good stability, reproducibility, and some selectivity.     

Improving electrochemical performance of poly(vinyl butyral)-based electrolyte by reinforcement with network of ceramic nanofillers

This study has concerned the development of polymer composite electrolytes based on poly(vinyl butyral) (PVB) reinforced with calcinated Li/titania (CLT) for use as an electrolyte in electrochemical devices. The primary aim of this work was to verify our concept of applying CLT-based fillers in a form of nano-backbone to enhance the performance of a solid electrolyte system. To introduce the network of CLT into the PVB matrix, gelatin was used as a sacrificial polymer matrix for the implementation of in situ sol–gel reactions. The gelatin/Li/titania nanofiber films with various lithium perchlorate (LiClO₄) and titanium isopropoxide proportions were initially fabricated via electrospinning, and ionic conductivities of electrospun nanofibers were then examined at 25 °C. In this regard, the highest ionic conductivity of 2.55 × 10⁻⁶ S/cm was achieved when 10 wt% and 7.5 wt% loadings of LiClO₄ and titania precursor were used, respectively. The nanofiber film was then calcined at 400 °C to remove gelatin, and the obtained CLT film was then re-dispersed in solvated PVB-lithium bis(trifluoromethanesulfonyl)imide (PVB-LiTFSI) solution before casting to obtain reinforced composite solid electrolyte film. The reinforced composite PVB polymer electrolyte film shows high ionic conductivity of 2.22 × 10⁻⁴ S/cm with a wider electrochemical stability window in comparison to the one without nanofillers.

     

Transparent conducting Sn:ZnO films deposited from nanoparticles

Homogeneous transparent conducting Sn:ZnO films on fused silica substrates were prepared by dip-coating from nanoparticle dispersions, while the nanocrystalline Sn:ZnO particles with different dopant concentrations were synthesized by microwave-assisted non-aqueous sol–gel process using Sn(IV) tert-butoxide and Zn(II) acetate as precursors and benzyl alcohol as solvent. The dopant concentration had a great impact on the electrical properties of the films. A minimum resistivity of 20.3 Ω cm was obtained for a porous Sn:ZnO film with initial Sn concentration of 7.5 mol% after annealing in air and post-annealing in N₂ at 600 °C. The resistivity of this porous film could further be reduced to 2.6 and 0.6 Ω cm after densified in Sn:ZnO and Al:ZnO reaction solution, respectively. The average optical transmittance of a 400-nm-thick Sn:ZnO film densified with Sn:ZnO after the two annealing steps was 91%.     

Chitosan and radiation chemistry

Chitosan as a raw material with special properties has drawn attention of scientists working in the field of radiation processing and natural polymer products development, and also of specialists working in the field of radiation protection and oncologists. Especially the applications concern reduced molecular weight chitosan which still retain its chemical structure; such form of the compound is fostering biological, physical and chemical reactivity of the product. Chitosan degrades into fragments under γ-ray or electron beam irradiation. Antibacterial properties of the product are applied in manufacturing hydrogel for wound dressing and additional healing properties can be achieved by incorporating in the hydrogel matrix chitosan bonded silver clusters. Another possible application of chitosan is in reducing radiation damage to the radiation workers or radiation cured patients. In the case of radioisotopes oral or respiratory chitosan-based materials can be applied as chelators. Applications of chitosan in oncology are also reported.     

New-chitosan characterization and its bioassay in different salinity solutions using <Emphasis Type="Italic">Artemia salina</Emphasis> as bio tester

New chitosan powder extracted from eggs capsules of Rapana venosa and commercial chitosan powder were analyzed by spectral (UV–Vis) and color methods. The novelty of this study consists in the first time toxicity evaluation of the chitosan extracted from the walls of Rapana venosa eggs capsules. The evaluation was focused on the cytological behaviour of the new-chitosan particles in two different salinity conditions (3 and 35‰), at different concentrations, on bio tester organisms. The aim of this study was to determine the biological effect of the chitosan easily extracted from new marine sources and with a low financial effort. The experimental studies were performed by exposure of Artemia salina larvae, naupliar stage in saline chitosan solutions. The larvae were picked-up in 24 h time, after hatching and they were placed in the experimental recipients of 1 mL volume capacities, three repetitions were made for each test. The bioassay effects were recorded at 24 and 48 h after experiment started. The toxicity was indicated by the registration of larvae mortality, probably, induced by the cell growth inhibitions. The obtained results showed that the high toxicity effects could be observed at low concentrations of chitosan, in law salinity solutions. Due to this cytotoxicity variability, chitosan solutions could be useful in a wide range of applications (antifouling, biomedical or sewage cleaning).     

Fabrication of Porous Metal Oxide Semiconductor Films by a Self-Template Method Using Layered Hydroxide Metal Acetates

Porous metal oxide (Co₃O₄, NiO, or ZnO) films were fabricated by a self-template method using layered hydroxide metal acetates (LHMA; metal = Co, Ni, or Zn) as templates. LHMAs were initially grown on glass substrates through a chemical bath deposition in methanolic-aqueous solutions of metal acetates at 60°C. The template films had a unique, nest-like morphology consisting of interlaced flake-like particles as a result of two-dimensional crystal growth of LHMAs in supersaturated solutions. The templates were successfully converted into porous Co₃O₄, NiO, or ZnO films by heating at 500°C for 10 min in air without microstructural deformation.     

Evaluation of a non-woven fabric coated with a chitosan bi-layer composite for wound dressing

This study presents a novel design of an easily stripped bi-layer composite that consists of an upper layer of a soybean protein non-woven fabric coated with a lower layer, a genipin-crosslinked chitosan film, as a wound dressing material. This study examines the in vitro properties of the genipin-crosslinked chitosan film and the bi-layer composite. Furthermore, in vivo experiments are conducted to study wounds treated with the composite in a rat model. Experimental results show that the degree of crosslinking and the in vitro degradation rate of the genipin-crosslinked chitosan films can be controlled by varying the genipin contents. In addition, the genipin contents should exceed 0.025 wt.-% of the chitosan-based material if complete crosslinking reactions between genipin and chitosan molecules are required. Water contact angle analysis shows that the genipin-crosslinked chitosan film is not highly hydrophilic; therefore, the genipin-crosslinked chitosan layer is not entangled with the soybean protein non-woven fabric, which forms an easily stripped interface layer between them. Furthermore, this new wound dressing material provides adequate moisture, thereby minimizing the risk of wound dehydration, and exhibits good mechanical properties. The in vivo histological assessment results reveal that epithelialization and reconstruction of the wound are achieved by covering the wound with the composite, and the composite is easily stripped from the wound surface without damaging newly regenerated tissue.