Ag/ZnO heterostructure nanocrystals: synthesis, characterization, and photocatalysis

A high yield of the dimer-type heterostructure of Ag/ZnO nanocrystals with different Ag contents is successfully prepared through a simple solvothermal method in the absence of surfactants. The samples are characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis spectroscopy, and IR spectroscopy. The results show that all samples are composed of metallic Ag and ZnO; Ag nanoparticles locate on the surface of ZnO nanorods; the binding energy of Ag 3d(5/2) for the Ag/ZnO sample with a Ag content of 5.0 atom % shifts remarkably to the lower binding energy compared with the corresponding value of pure metallic Ag because of the interaction between Ag and ZnO nanocrystals; the concentration of oxygen vacancy for the as-synthesized samples varies with the increasing Ag content, and the Ag/ZnO sample with a Ag content of 5.0 atom % has the largest density of oxygen vacancy. In addition, the relationship between their structure and photocatalytic property is investigated in detail. It is found that the photocatalytic property is closely related to its structure, such as heterostructure, oxygen defect, and crystallinity. The presence of metallic Ag nanoparticles and oxygen vacancy on the surface of ZnO nanorods promotes the separation of photogenerated electron-hole pairs and thus enhances the photocatalytic activity.     

ZnO纳米柱状阵列表面AgX等离子基元修饰及其可见光光催化活性

采用浸渍法制备了表面AgX（X=I,Br）等离子基元修饰的ZnO纳米柱状阵列,研究了浸渍浓度和时间以及紫外光光照预处理对ZnO纳米柱状阵列可见光光催化活性的影响.采用场发射扫描电子显微镜、X射线衍射仪、紫外可见漫反射吸收光谱以及X射线光电子能谱仪等手段对ZnO纳米柱状阵列的形貌、相组成、禁带宽度及其表面特性进行了表征.结果显示,AgBr颗粒分布于ZnO纳米柱状阵列的顶端及顶端侧面,同时AgBr颗粒之间相互接触而形成网状结构.通过紫外光光照预处理,AgBr表面出现细小颗粒,形成Ag/AgBr/ZnO纳米复合结构.可见光光催化降解甲基橙结果表明,在相同工艺条件下所制AgBr/ZnO的可见光光催化活性明显优于AgI/ZnO,且与浸渍浓度及时间有关.由于ZnO纳米柱状阵列的比表面积大,AgBr的可见光响应特性以及Ag/AgBr纳米结构的表面等离子效应,经过紫外光光照预处理形成的Ag/AgBr/ZnO纳米复合结构表现出最好的可见光光催化活性.     

Ag/ZnO纳米纤维的制备及光催化性能

采用静电纺丝技术及煅烧法制备了氧化锌纳米纤维, 然后采用水热法将银纳米颗粒负载到了氧化锌纳米纤维表面. 利用X射线衍射(XRD)、 X射线光电子能谱(XPS)、 能量色散X射线光谱(EDX)、 扫描电子显微镜(SEM)及透射电子显微镜(TEM)等技术对合成的Ag/ZnO纳米纤维的结构和组成进行了表征. SEM结果表明, 直径在5~100 nm之间的银纳米颗粒附着在直径在80~330 nm之间的氧化锌纤维表面形成了异质结构. 以常见的有机污染物甲基橙、 亚甲基蓝和罗丹明B等为降解底物, 对Ag/ZnO纳米纤维的光催化性能进行了表征. 结果表明, 负载银纳米颗粒后, 复合催化剂的光催化性能明显提高.     

花状ZnO/ZnS异质结构的简易合成、结构表征及光催化活性

采用简便的两步溶液相化学方法,在较低温度下(80℃),制备出了花状的ZnO/ZnS异质结构。分别利用X射线衍射、X射线光电子能谱仪、扫描电子显微镜、透射电子显微镜、紫外-可见光谱仪等测试手段对所制备的样品进行表征,结果表明ZnO/ZnS异质结构是由花状ZnO纳米结构和ZnS纳米粒子组成。在光降解罗丹明B(RhB)的测试中,ZnO/ZnS异质结构样品体现出了比ZnO前驱物和商业P25光催化剂更高的光催化效率,这主要可归因于异质结构更有利于电子-空穴的有效分离。ZnO/ZnS光催化剂体现出良好的循环稳定性。     

可循环SERS基底ZnO/Ag纳米材料合成和表征

利用简易、绿色、一锅煮的水热法合成了花状氧化锌/银复合纳米材料。然后利用各种光谱和显微技术对复合物进行了表征,并讨论了其表面增强拉曼(SERS)性能和光催化性能。结果表明氢氧化钠的量对于这种复合纳米材料的形貌和性能具有重要的调节作用。和其他形貌的氧化锌/银复合纳米材料相比较,花状氧化锌/银复合纳米材料具有最佳的光催化性能。同时进一步以花状氧化锌/银复合纳米材料作为SERS基底研究其表面增强拉曼性能,结果表明这种复合材料同时具有很好的表面增强拉曼性能。光催化和表面增强拉曼结果表明这种花状氧化锌/银复合纳米材料有望在有机物检测中作为一种具有很好的可循环性的新表面增强拉曼基底材料。     

Ag/ZnO/ZnSe三元异质结的合成及其可见光光催化性能

以Ag纳米线为模板,通过两步水浴法合成了Ag/ZnO/ZnSe三元异质结光催化材料。利用场发射扫描电子显微镜(FESEM)、X射线能谱仪(EDS)、X射线衍射仪(XRD)以及透射电子显微镜(FETEM)对样品的形貌和结构进行了表征。结果显示,Ag/ZnO/ZnSe三元异质结为蠕虫状的Ag/ZnO二元异质结外镶嵌着ZnSe小颗粒。在可见光下,对比纯Ag纳米线、纯ZnO纳米球、Ag/ZnO异质结对罗丹明B的可见光降解效率,结果发现Ag/ZnO/ZnSe异质结表现出了更高的光催化效率。其光催化性能的提高主要是由于Ag/ZnO/ZnSe异质结的作用促使电子空穴对的分离,降低了电子空穴对的复合机率,从而提高了材料的光催化效率。     

可循环SERS基底ZnO/Ag纳米材料合成和表征

利用简易、绿色、一锅煮的水热法合成了花状氧化锌/银复合纳米材料。然后利用各种光谱和显微技术对复合物进行了表征,并讨论了其表面增强拉曼（SERS）性能和光催化性能。结果表明氢氧化钠的量对于这种复合纳米材料的形貌和性能具有重要的调节作用。和其他形貌的氧化锌/银复合纳米材料相比较,花状氧化锌/银复合纳米材料具有最佳的光催化性能。同时进一步以花状氧化锌/银复合纳米材料作为SERS基底研究其表面增强拉曼性能,结果表明这种复合材料同时具有很好的表面增强拉曼性能。光催化和表面增强拉曼结果表明这种花状氧化锌/银复合纳米材料有望在有机物检测中作为一种具有很好的可循环性的新表面增强拉曼基底材料。     

Ag/ZnO/ZnSe三元异质结的合成及其可见光光催化性能

以Ag纳米线为模板,通过两步水浴法合成了Ag/Zn O/Zn Se三元异质结光催化材料。利用场发射扫描电子显微镜(FESEM)、X射线能谱仪(EDS)、X射线衍射仪(XRD)以及透射电子显微镜(FETEM)对样品的形貌和结构进行了表征。结果显示,Ag/Zn O/Zn Se三元异质结为蠕虫状的Ag/Zn O二元异质结外镶嵌着Zn Se小颗粒。在可见光下,对比纯Ag纳米线、纯Zn O纳米球、Ag/Zn O异质结对罗丹明B的可见光降解效率,结果发现Ag/Zn O/Zn Se异质结表现出了更高的光催化效率。其光催化性能的提高主要是由于Ag/Zn O/Zn Se异质结的作用促使电子空穴对的分离,降低了电子空穴对的复合机率,从而提高了材料的光催化效率。     

Hierarchical Ag/ZnO micro/nanostructure: Green synthesis and enhanced photocatalytic performance

Ag/ZnO metal-semiconductor nanocomposites with hierarchical micro/nanostructure have been prepared by the hydrothermal synthesis in the presence of bovine serum albumin (BSA). The results suggest that this biomolecule-assisted hydrothermal method is an efficient route for the fabrication of Ag/ZnO nanocomposites by using BSA both a shape controller and a reducing agent of Ag⁺ ions. Moreover, Ag nanoparticles on the ZnO act as electron sinks, improving the separation of photogenerated electrons and holes, increasing the surface hydroxyl contents of ZnO, facilitating trapping the photoinduced electrons and holes to form more active hydroxyl radicals, and thus, enhancing the photocatalytic efficiency of ZnO. This is a good example for the organic combination of green chemistry and functional materials.     

A simple solvothermal route towards the morphological control of ZnO and tuning of its optical and photocatalytic properties

ZnO nanoparticles with different morphologies were solvothermally synthesized by controlling the alkali (sodium hydroxide) concentration in an isopropanol solution. The products were characterized by means of powder X-ray diffraction, UV-visible absorption spectra, scanning electron microscopy, transmission electron microscopy, and selected area electron diffraction. The morphologies of the formed ZnO nanocrystals were dependent on the concentration of the alkali, and with increases of sodium hydroxide concentration, the ZnO nanocrystals evolved from rod to hexagonal bipyramid, and then to a flower-like nanostructure. The flower-like nanostructure resulted from the etching of the hexagonal bipyramid by the excess alkali. The photoluminescence and photocatalytic properties of the prepared ZnO were investigated. The difference of green emission among the ZnO nanocrystals indicated that a higher sodium hydroxide concentration led to a higher level of defects. The size, the surface structure and defects in the ZnO nanocrystals affected its photo-degradation characteristics.     

复合Ag/ZnO分级结构微球的制备及其光催化性能研究

采用化学沉淀法制备ZnO微球,利用柠檬酸三钠（TCD）避光还原硝酸银在ZnO表面沉积银粒子制备Ag/ZnO复合材料.利用XRD、SEM、TEM、EDS、FTIR、UV-vis DRS、PL、BET等对Ag/ZnO的结构、组分、形貌及光谱性质进行了表征,通过紫外及可见光照降解甲基橙溶液评价样品的光催化性能.结果表明：ZnO纳米微球是由ZnO纳米片相互交错构筑而成的具有丰富孔道的分级结构,Ag纳米粒子均匀沉积在ZnO纳米片上.Ag的沉积显著增加了ZnO的可见光吸收,猝灭了ZnO荧光,提高了ZnO催化活性.     

ZnO/graphene-oxide nanocomposite with remarkably enhanced visible-light-driven photocatalytic performance

In this work, a high-performance photocatalyst of ZnO/graphene-oxide (ZnO/GO) nanocomposite was synthesized via a facile chemical deposition route and used for the photodegradation of organic dye from water under visible light. The nanocomposite was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller N(2) adsorption-desorption analysis, and UV-Vis diffusion reflectance spectroscopy. The ZnO/GO nanocomposite consisting of flower-like ZnO nanoparticles anchored on graphene-oxide sheets has a high surface area and hierarchical porosity, which is benefit to the adsorption and mass transfer of dye and oxygen species. For the photodegradation of organic dyes under visible light, ZnO/GO nanocomposite exhibited remarkably enhanced photocatalytic efficiency than graphene-oxide sheets and flower-like ZnO particles. Moreover, the photocatalytic efficiency of ZnO/GO nanocomposite could be further improved by annealing the product in N(2) atmosphere. The outstanding photocatalytic performance was ascribed to the efficient photosensitized electron injection and repressed charge carriers recombination in the composite with GO as electron collector and transporter, thus leading to continuous generation of reactive oxygen species for the degradation of methylene blue.     

The synthesis of Cu/plate-like ZnO nanostructures and their self-assembly mechanism

A composite Cu/ZnO nanostructure with Cu nanoparticles supported on ZnO hexagonal nanoplates has been successfully fabricated by a heating approach, using their metal oleate salts as the precursors without any additives. Combined Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and other examination technologies, the structural properties and formation mechanism of as-synthesized Cu/ZnO nanocomposites are studied in detail. The results reveal that the nanostructures are plate-like with uniform shape and size, and Cu nanoparticles exhibit specific (111) plane matching with the (002) facet of ZnO, indicating a surface-induced interaction mechanism. Further characterization demonstrates that copper nanoparticles can be generated by a decomposition/self-reduction route of copper salts, and the oleate ions act as dual roles in the process: reducing and protecting agents. The difference of decomposition temperature between metal oleates also plays important roles in the formation of Cu/ZnO nanostructure. In addition, the catalytic performance of these nanocomposites is evaluated and it can be found that compared with Cu/rod-like ZnO, as-synthesized samples are highly selective for methanol.     

纳米Ag/ZnO光催化剂及其催化降解壬基酚聚氧乙烯醚性能

采用氨浸法制备了不同Ag负载量的纳米Ag/ZnO光催化剂,并用X射线衍射、比表面积测定、X射线光电子能谱和漫反射紫外-可见光谱测定了Ag/ZnO的晶型结构、比表面积、表面组成和光谱特征.以壬基酚聚氧乙烯醚(NPE-10)为模型污染物,分别在紫外光和可见光照射下考察了纳米Ag/ZnO的光催化活性.结果表明,Ag能成功地负载到ZnO表面,且随着Ag负载量的增加,ZnO的粒径逐渐增大,比表面积逐渐减小.与纳米ZnO样品相比,Ag/ZnO中Ag 3d5/2结合能减小,而Zn 2p和O 1s结合能增大,ZnO表面的羟基氧和吸附氧含量增加.当Ag负载量大于0.5%时,Ag/ZnO样品的吸收光谱发生红移,在可见光区出现吸收.光催化降解结果表明,0.5%Ag/ZnO样品的光催化活性最高,在紫外光和可见光照射3 h后NPE-10降解率分别约为77%和56%,而ZnO样品的光催化活性仅约为61%和40%.     

Band structure tuning of ZnO/CuO composites for enhanced photocatalytic activity

The toxic dye pigments, even in small quantities, can damage ecosystems. Removing organic, inorganic, and microbiological contaminants from wastewater via heterogeneous photocatalysis is a promising method. Herein, we report the band structure tuning of ZnO/CuO nanocomposites to enhance photocatalytic activity. The nanocomposites were synthesized by a chemical approach using step-wise implantation of p-type semiconductor CuO to n-type semiconductor ZnO. Various characterization techniques such as X-ray diffraction analysis (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray analysis (EDX) and UV spectroscopy were used to investigate the crystal structure, surface morphology, elemental composition and optical properties of the synthesized samples. As the CuO content increased from 10% to 50% in ZnO/CuO nanocomposites, the optical bandgap decreased from 3.36 to 2.14 eV. The photocatalytic activity of the samples was evaluated against the degradation of methylene blue (MB) under visible irradiation. Our study demonstrates a novel p–n junction oxide photocatalyst based on wt. 10% CuO/ZnO with superior photocatalytic activity. Effectively 66.6% increase in degradation rate was achieved for wt. 10% CuO/ZnO nanocomposite compared to pure ZnO nanoparticles.     

3D flower-like heterostructured TiO2@Ni(OH)2 microspheres for solar photocatalytic hydrogen production

TiO₂@Ni(OH)₂ core-shell microspheres were synthesized by a facile strategy to obtain a perfect 3D flower-like nanostructure with well-arranged Ni(OH)₂ nanoflakes on the surfaces of TiO₂ microspheres; this arrangement led to a six-fold enhancement in photocatalytic hydrogen evolution. The unique p-n type heterostructure not only promotes the separation and transfer of photogenerated charge carriers significantly, but also offers more active sites for photocatalytic hydrogen production. A photocatalytic mechanism is proposed based on the results of electrochemical measurements and X-ray photoelectron spectroscopy.     

Photocatalytic oxidation of organic dyes with nanostructured zinc dioxide modified with silver metals

Silver-doped nano-ZnO samples with different Ag loadings were prepared by a one-spot solvothermal method. The structure, physico-chemical and optical properties of the products are characterized by using X-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive X-ray analysis (EDS), diffuse reflectance spectroscopy (DRS) and photoluminescence spectra (PL). The photocatalytic activity of the as-prepared samples was examined by using photocatalytic oxidation of methyl orange (MO) as a model reaction, and the effects of the noble metal content on the photocatalytic activity were investigated. The results indicated that the photocatalytic activity of ZnO nanoparticles can be greatly improved by depositing appropriate amount of noble metal on their surface as electron scavengers. In addition, a key mechanism was proposed in order to account for the enhanced activity. The enhancement for the photocatalytic activities can be attributed to the interaction between Ag particles and ZnO, which made Ag particles act as electron traps to effectively separate the excited electron-hole pairs.     

富表面氧空位Fe2O3/ZnO催化剂在光催化合成氨中的应用

光催化合成氨是一种绿色节能的合成氨技术,设计制造丰富的表面氧空位和异质结构是促进氮分子活化和抑制电子-空穴复合的重要方法。我们以乙二醇作为还原剂,采用溶剂热法制备合成了Fe2O3/ZnO光催化剂,利用X射线衍射(XRD)、透射电镜(TEM)、电子顺磁共振(EPR)、紫外-可见漫反射(UV-Vis DRS)、荧光光谱(PL)及光电流(PC)对Fe2O3/ZnO催化剂进行表征,并考察了Fe2O3/ZnO催化剂在常温、常压下的光催化合成氨的性能。4%Fe2O3/ZnO催化剂在无牺牲剂下用于光催化合成氨,有较好的光催化效率和稳定性,其合成氨效率达到2059μmol·L-1·g-1·h-1。其高催化效率归因于:可见光区域吸收的提高、氮分子在表面氧空位与Fe3+活性中心上的协同活化及光生电子与空穴的高分离效率。     

Pd nanoparticle-modified Bi2WO6 nanoplates used for visible-light-driven photocatalyst

Pd nanoparticles supported on Bi₂WO₆ nanoplates used for visible-light-driven photocatalyst were successfully synthesized by photoreduction deposition method under visible-light irradiation. Different analytical techniques including X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and photoluminescence spectroscopy revealed that face-centered cubic metallic Pd nanoparticles were uniformly loaded on top of orthorhombic Bi₂WO₆ nanoplates to form heterostructure Pd/Bi₂WO₆ nanocomposites. Photocatalytic activities of pure Bi₂WO₆ sample and heterostructure Pd/Bi₂WO₆ nanocomposites were studied through the photodegradation of rhodamine B (RhB) under visible-light irradiation. The photocatalytic efficiency of Bi₂WO₆ was increased to the highest by being loaded with 5 wt% Pd and then decreased by being loaded with 10 wt% Pd. The improved photocatalytic efficiency caused by high-efficiency diffusion and separation of photo-generated charge carriers was explained and can lead to superior photodegradation of RhB under visible-light irradiation.

     

构筑先进二维异质结构Ag/WO3−x用于提升光电转化效率

Solar energy, which is clean, affordable and reliable, can help alleviate the current environmental pollution and energy crisis efficiently. In the past few decades, great progress has been made in harvesting and converting solar energy into chemical energy. Among various technologies, plasmon-induced photoelectrochemistry has been proposed as a promising alternative for solar energy conversion. The hot electrons generated from plasmon excitation and transfer from metal nanostructures to semiconductors is a potential new paradigm for solar energy conversion. However, the ultrafast decay of the hot carriers is unfavorable for the improvement of photocatalytic efficiency. Therefore, finding more efficient photocatalysts, with enhanced light absorption and a longer carrier lifetime, is of paramount importance for improving the conversion efficiency of solar energy, but their fabrication is challenging. In this work, a plasmonic metal/semiconductor heterostructure based on Ag nanoparticles embedded in two-dimensional (2D) amorphous sub-stoichiometric tungsten trioxide (a-WO_3−x), followed by annealing, was successfully fabricated. Firstly, the peculiar nanostructure of 2D a-WO_3−x was successfully constructed from WS₂ nanosheets with supercritical CO₂ (SC CO₂) at 200 ℃. Secondly, the Ag/a-WO_3−x heterostructure was synthesized using an in situ reduction method. Finally, the obtained 2D heterostructure of Ag/WO_3−x was annealed at 400 ℃ in N₂ to further improve its stability and conductivity. X-ray diffraction (XRD), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure, morphology, and composition of the material, respectively. UV-Vis spectra were also measured to evaluate light adsorption. Characterization results show that the amorphous structure can effectively anchor metal nanoparticles, and the metal nanoparticles are uniformly dispersed in the amorphous region and have a small size. The as-prepared nanocomposites showed efficient photoelectrochemical (PEC) water splitting when serving as photoelectrode materials, and efficient PEC activity towards photo-oxidation degradation currents under excitation of Ag localized surface plasmon resonance (LSPR). The photocurrent response of the Ag/WO_3−x heterostructure was approximately five times greater than that of a-WO_3−x. Moreover, the PEC degradation efficiency of Ag/WO_3−x reached 96.7% for MO under Vis light illumination (after reaction for 120 min), while the PEC degradation efficiency of WO_3−x was only 63.6%. The high PEC performance of the composite photoanode can be ascribed to the local surface plasmon resonance (LSPR) effect of the Ag nanoparticles, which can enhance the light absorption and hot electron transformation. Moreover, the construction of local crystalline-amorphous interfaces can further promote the separation efficiency of the photogenerated electron-hole pairs, and thus increase conductivity. This work provides a positive strategy for the fabrication of advanced photocatalysts, and a new perspective on understanding of the synergistic effects of structural and electronic regulations.