活性炭负载钌基氨合成催化剂的制备和催化活性

A series of active carbon supported ruthenium based catalysts, promoted by alkali and alkaline earth nitrate, are prepared by impregnation method and with RuCl 3·3H 2O as precursor. Effects of support, promoter and preparation conditions on catalytic activity are discussed. The catalytic activity is evaluated with a fixed bed micro reactor at lower pressure. The results show that the impregnation sequence affects the catalytic activity obviously. Ba Ru K/C is the preferred impregnation sequence. And effects of nature, producing area and pre treatment of the support on catalytic activity are also examined. Catalytic activity increases with the amount of Ru deposited on the support, it attains maximum when Ru loading is 8%. Optimal molar ratio of promoter to Ru is 10.     

CuCl/沸石双功能羰基化催化剂催化合成叔碳酸

Bifunctional carbonylation catalysts were prepared by introducing both of acidic and metallic sites into zeolites, such as β, M and Y, by which tertiary butyl acid was synthesized under mild reaction conditions. The effects of reaction temperature and the copper amount as well as the acid strength on the catalytic activity were investigated. The results show that when the content of cuprous for β, M and Y are 2 35%, 2 48% and 7 13% respectively, the carbonylation activity of the related sample is the greatest. In the reaction temperature range, lower temperature is favorable for yielding acid and higher temperature is favorable for yielding ester. The catalytic activity increases with the increase of the acid strength. The in situ FT IR study shows that Cu(Ⅰ) is the metallic active site.     

ELECTROCARBOXYLATION OF ORGANIC COMPOUNDS WITH CARBON DIOXIDE CATALYZED BY METALLOPORPHYRINS(Ⅲ)——EFFECTS OF AXIAL LIGANDS ON CATALYTIC ACTIVITY OF CoTPP

The effects of peptides,amino acids and organic bases as an axial ligand on reaction ac-tivities in the electrocarboxylation of benzyl chloride with CO_2 catalyzed by CoTPP are reported.The imidazole organic base,peptide containing —SH and amino acid containing imidazolyl en-hance the catalytic activity.The effect of imidazole amounts on the catalytic activity of CoTPP isstudied.     

氧化铝和氧化锆催化剂上2-取代苯并咪唑和1,5-二取代苯并二氮的合成(英文)

In this study, alumina, zirconia, manganese oxide/alumina, and manganese oxide/zirconia have been investigated for their catalytic activity in the condensation reaction between o-phenylenediamine and an aldehyde or a ketone to synthesise 2-substituted benzimidazoles and 1,5-disubstituted benzodiazepines respectively. Surface area, surface acidity, and morphology of the catalysts have been analysed and correlated with their catalytic activity. The isolated yields of 2-substituted benzimidazoles and 1,5-disubstituted benzodiazepines are in the range of 30% to 95%. A good correlation between the amount of surface acid sites as well as the surface morphology of the catalysts and the catalytic activity has been observed. This method has been found to be simple and economical. The solid supports could be regenerated and reused without much loss in their activity. Further, the solid supports have been also found to be effective as general catalysts in the condensation of o-phenylenediamine with other substituted aldehydes and ketones.     

A Novel Complex of Pyridinium Polystyrylsulfonate with Fluoboric Acid as a Catalyst for Acetalization of Benzaldehyde with n-Butanol

A new complex (1) was prepared by mixing pyridinium polystyrylsulfonate resin and aqueous fluoboric acid, followed by being dehydrated. 1 can be used as an acidic catalyst for the acetalization of benzaldehyde with n-butanol with a highly catalytic activity. The characterization and reusability of 1 are discussed.     

CHARACTERIZATION OF IRON COMPLEXES SUPPORTED ON POLYMER AND THEIR CATALYTIC ACTIVITY IN BUTADIENE POLYMERIZATION

Styrene-acrylic acid copolymer (SAAC)-supported iron complex (SAAC·Fe)was characterized and the effect of the characteristic parameters on the catalytic activity of the complex was investigated. IR spectrum suggested that the complex SAAC·Fe possesses a structure of(C)and the Fe-O bond is higher in covalency.The complex SAAC·Fe with the structure of(C)shoved a higher catalytic activity in butadiene polymerization. When Fe/-COOH molar ratio in SAAC·Fe was about 0.2 the complex gave optimum catalytic activity. The catalytic activity of SAAC·Fe with the higher content of long sequence of acrylic acid units was low. When the content of the short sequence of acrylic acid units was predominant and at the same time the content of the short sequence was approximately equal to that of the long sequence for stryrene, the activity of the complex was high.     

Hydroisomerization of n-heptane over bimetal-bearing H_3PW_(12)O_(40) catalysts supported on dealuminated USY zeolite

The bimetal-bearing (CePt or LaPt) 12-tungstophosphoric acid (H3PW12O40 (PW)) catalysts supported on dealuminated USY zeolite (DUSY) were prepared by impregnation and characterized by XRD, BET, IR, and H2-chemisorption. Their catalytic activities were tested in the hydroisomerization of n-heptane with a continuous atmospheric fixed-bed reactor. After the steam treatment combined with the acid leaching, as well as the supporting with PW and the bimetals, the DUSY support retains the Y zeolite porosity and the PW well keeps its Keggin structure in catalysts. The doping of Ce into the catalysts enhances the dispersion of Pt on the catalyst surface. The Pt-bearing PW catalysts doped with Ce or La, especially Ce, exhibit much higher catalytic activity and selectivity than the catalysts without dopants at lowered reaction temperatures. At the optimal reaction conditions, i.e., the reaction temperature of 250℃ and WHSV of 1.4 h1, the catalyst with a Pt loading of 0.4%, PW loading of 10% and a molar ratio of Ce to Pt of 15:1 shows a conversion of n-heptane of 70.3% with a high selectivity for isomerization products of 94.1%.     

Effects of Zr/Ti molar ratio in SO42-/ZrO2-TiO2 calcined at different temperatures on its surface properties and glucose reactivity in near-critical methanol

Effects of Zr/Ti molar ratio in SO42-/ZrO2-TiO2 solid acid catalyst calcined at different temperatures on its surface properties and catalytic activity were thoroughly investigated in this paper. The physicochemical characteristics of prepared samples were determined by N2 adsorptiondesorption, XRD, NH3-TPD and XPS techniques, respectively. It was found that the crystallization temperature of the samples increased after the combination of ZrO2 and TiO2; and phase transformations from the anatase to the rutile of TiO2 species and the tetragonal to the monoclinic of ZrO2 species were effectively suppressed at higher temperature. The sample with a Zr/Ti molar ratio of 3/1 calcined at 450℃ showed the highest surface area and the most acid sites among all the tested samples. The acid site densities of samples were relatively closed to each other if they were calcined at the same temperature, however, decreased with the calcination temperature. The result indicates that the sulfur content in samples is a crucial factor to control the acid site density. Calcining the sample at 650℃ and higher temperatures resulted in a significant desorption of sulfate ion on the samples. The synthesized samples were evaluated as a potential catalyst for glucose conversion under the near-critical methanol conditions (200℃/4 MPa). The results suggested that the relatively weaker acid sites of the catalyst were more favorable for the accumulation of methyl glucosides, while the moderate acid sites were responsible for the formation of methyl levulinate. The catalytic activity for methyl levulinate production almost increases linearly with the catalyst acid site density. The catalyst deactivation is due to the loss of sulfate ion and the two catalysts with Zr/Ti molar ratios of 3/1 and 1/3 could effectively alleviate the deactivation caused by sulfate solution in the reaction medium and can be reused after calcination with the reuse rate of over 90% in terms of the methyl levulinate selectivity.     

Synthesis of palladium-rhodium bimetallic nanoparticles for formic acid dehydrogenation

Herein,we report for the first time the synthesis of preformed bimetallic Pd-Rh nanoparticles with different Pd:Rh ratios(nominal molar ratio:80-20,60-40,40-60,20-80) and the corresponding Pd and Rh monometallic ones by sol immobilization using polyvinyl alcohol(PVA) as protecting agent and NaBH4 as reducing agent,using carbon nanofibers with high graphitization degree(HHT) as the desired support.The synthesized catalysts were characterized by means of Transmission Electron Microscopy(TEM) and inductively coupled plasma optical emission spectroscopy(ICP-OES).TEM shows that the average particle size of the Pd-Rh nanoparticles is the range of 3-4 nm,with the presence of few large agglomerated nanoparticles.For bimetallic catalysts,EDX-STEM analysis of individual nanoparticles demonstrated the presence of random-alloyed nanoparticles even in all cases Rh content is lower than the nominal one(calculated Pd:Rh molar ratio:90-10,69-31,49-51,40-60).The catalytic performance of the Pd-Rh catalysts was evaluated in the liquid phase dehydrogenation of formic acid to H2.It was found that Pd-Rh molar ratio strongly influences the catalytic performance.Pd-rich catalysts were more active than Rh-rich ones,with the highest activity observed for Pd90:Rh10(1792 h^-1),whereas Pd69:Rh31(921 h^-1) resulted the most stable during recycling tests.Finally,Pd90:Rh10 was chosen as a representative sample for the liquid-phase hydrogenation of muconic acid using formic acid as hydrogen donor,showing good yield to adipic acid.     

聚醚砜酮的磺化及其在异丁烯低聚反应中的应用

Concentrated homogeneous mineral acids have been widely used as catalysts in industrial processes for several decades. These catalysts are corrosive to the apparatus, and there are large volumes of chemically reactive waste stream that are difficult to deal with[1]. In order to solve these problems, investigators have replaced these mineral acids with solid acid catalysts. Besides inorganic solid acid catalysts such as zeolite, solid organic polymeric resins containing acid groups, especially sulfuric acid resins such as Amberlyst[2], have attracted much attention. Compared with most inorganic acid catalysts, they have the advantages of their potentially high acidity, controllable surface area and porosity[3]. This article reports a novel sulfonated poly(phthalazinone ether sulfone ketone) (S-PPESK) resin and its application to isobutene oligomerization. S-PPESK exhibits high catalytic activity and excellent dimerization selectivity.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

Hard and soft acids and bases: structure and process

Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Preparation and photolysis of poly-p-ethylacrylophenone and poly-p-chloroacrylophenone and their copolymers with styrene and methyl methacrylate

Poly-p-ethylacrylophenone (PPEtAP) and poly-p-chloroacrylophenone (PPClAP) and their copolymers with styrene (PEtAP/S) and (PClAP/S) and with methyl methacrylate (PEtAP/MMA) and (PClAP/MMA) were prepared. Quantum yields of main-chain scissions at 366 nm at room temperature in benzene solution are of the same order as those of the unsubstituted polyacrylophenone and its copolymers. Substitution with chlorine and ethyl group in the para position compared to the unsubstituted polyacrylophenone and its copolymers leads to an increase of the lifetime for the n–π^* excited triplet state, as is evident from the measured quenching constants of photolysis. The low-temperature emission spectra of the copolymers are similar to the spectra of the model compounds in a polymer film. For the homopolymer, however, the character of the emission spectrum changes considerably.     

Concentrations and distributions of trace and minor elements in Chinese and Canadian coals and ashes

A total of 35 trace and minor elements including some of environmental significance were determined in each of a selection of 15 Chinese and 6 Canadian thermal coals and their ashes by using the SLOWPOKE-2 nuclear reactor facility of the University of Toronto. The concentrations and distributions of these constituents among the coals and their combustion products (viz. ash and volatile matter) are presented together with an interpretation of their significance in relation to the large scale combustion of these coals as thermal fuels in industrialized countries such as China and Canada. The detailed results showed wide variations in trace impurity concentrations (up to a factor of 100 and more) among the coals studied with few large differences between those of Chinese and Canadian origin except that the rare earths, Sc, Th, U, I, and Se were much higher in the former, other halogens, As and Na were lower. Values for elemental enrichment factors (EF) relative to normal crustal abundances indicated that only As(EF=13), Br(5.7), I(16), S(230), Sb(11) and Se(320) were appreciably enriched in coal. During static ashing at 750°C most of the halogens, S and Se were volatilized whereas most other inorganic constituents were highly retained and concentrated in the ash by factors of 6 to 11.     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.