HMG-CoA还原酶抑制剂三维药效团的构建

以作用于鼠肝脏细胞的21个3-羟基-3-甲基戊二酰辅酶A(HMG-CoA)还原酶抑制剂(RI)为训练集, 训练集化合物具备结构多样性, 来源于相同药理模型, 活性值IC50范围在0.3-8000 nmol·L-1. 利用Catalyst 计算HMG-CoA还原酶抑制剂最优药效团由一个氢键受体, 一个氢键给体, 一个疏水基团和一个芳香环特征组成. 药效团模型Fixed cost值, Total cost值和Configuration cost值分别为88.75、111.5 和16.98. 训练集化合物活性计算值与实测值相关系数为0.8883, 偏差值为1.269, 交叉验证结果表明, 药效团模型具有较高的置信度, 对测试集化合物活性值的预测结果显示有较好的预测能力, 可用于数据库搜索发现新的具有该活性的化合物, 也可用于中药或天然产物药物的研究开发.     

大麻素Ⅰ型受体拮抗剂的结构特征

以92个具有大麻素受体Ⅰ(CB1)拮抗活性的化合物为训练集, 39个化合物为测试集, 采用Discovery Studio V2.5(DS)软件中的3D构效关系药效团产生(QSAR Pharmacophore Generation)模块建立药效团模型. 获得的最佳药效团模型的构成为一个氢键受体(HBA)、 一个疏水基团(HY)和二个芳环中心(RA), 采用费用函数(Cost function)评价药效团模型, 该模型的Δcost为119.32, 相关性为0.921, 均方根偏差为0.730, Configuration cost为16.1229, 表明模型能较好地预测化合物的活性. 同时针对目前已知的近450个化合物的12种结构类型进行了探讨, 所得结果为进一步设计CB1拮抗剂提供了理论依据.     

基于吡咯烷与正丁烷类衍生物CCR5拮抗剂的药效团模型构建

吡咯烷与正丁烷类CCR5(化学趋化因子受体5)拮抗剂可通过抑制人类免疫缺陷病毒(HIV-1)包膜蛋白与CCR5的相互作用而阻断病毒进入细胞. 本文使用已知拮抗剂结构和活性信息构建了一个三维药效团模型. 按照Catalyst/HypoGen模块的要求, 选择了25个结构和活性均具备差异性的分子作为药效团产生的训练集. 其中训练集分子以IC50值表示的生物活性值跨度为0.06到10000 nmol·L-1. 最好的药效团模型(Hypo 1)由两个正离子化特征以及三个疏水特征组成, 训练集预测相关系数为0.924, 均方根偏差为1.068. 模型用于预测由74个分子组成的测试集化合物活性, 结果表明模型可以提供较好的活性预测结果并用于新的拮抗剂的设计.     

人类腺苷受体A3亚型拮抗剂的构效关系分析

构建人类腺苷受体A3亚型药效团模型和三维蛋白结构模型用于作用模式研究.以18个来源于文献具有腺苷受体A3亚型拮抗活性的化合物作为训练集,使用HypoGen方法构建药效团模型.通过同源模建和分子动力学模拟构建了人类腺苷受体A3亚型的三维蛋白模型,并利用PROCHECK方法评估该模型的合理性,对所得的结构使用分子对接程序进行作用模式分析,药效团模型和同源模建结果相互匹配较好.使用新药效团模型对MDL药物数据库(MDDR)中包含的约120000个化合物进行虚拟筛选,得到了8个候选化合物,用于进一步的生物学评价和活性测定.本工作对于人类腺苷受体A3亚型拮抗剂的设计和抗哮喘药物的研发具有一定的理论指导和应用价值.     

基于药效团模型的DHODH抑制剂构效关系研究

利用药效团模型研究二氢乳清酸脱氢酶(Dihydroorotate dehydrogenase,DHODH)抑制剂的构效关系,为DHODH抑制剂的虚拟筛选提供新的方法.以31个具有DHODH抑制活性的化合物为训练集化合物,半数抑制浓度(IC50)范围为7~63000 nmol/L,利用Catalyst/HypoGen算法构建DHODH抑制剂药效团模型,通过对训练集化合物多个构象进行叠合,提取药效团特征及三维空间限制构建药效团模型.利用基于CatScramble的交叉验证方法及评价模型对已知活性化合物的活性预测能力,确定较优药效团模型.模型包含1个氢键受体、3个疏水中心,表征了受体配体相互作用时可能发生的氢键相互作用、疏水相互作用和π-π相互作用,4个药效特征在三维空间的排列概括了DHODH抑制剂产生活性的结构特点.所得较优模型对训练集化合物及测试集化合物的计算活性值与实验活性值的相关系数分别为0.8405和0.8788.利用药效团模型对来源于微生物的系列化合物进行虚拟筛选,筛选出59个预测活性较好的化合物,可作为进一步药物研发的候选化合物.     

糖原合成酶激酶抑制剂模型的建立

选取四类共89种活性较高的糖原合成酶激酶（GSK-3）抑制剂作为分子训练集，利用CATALYST系统，经构象分析，分子叠合等过程构建出药效团模型。筛选出具有一个氢键受体，一个芳香疏水中心，两个环芳香性的药效团模型 (weight=2.4,RMS=0.50, null cost- fixed cost =104, correlation coefficient=0.95)。该模型具有较强的预测活性能力，可用于优化分子结构，找到高效低毒的化合物。     

5-羟色胺(5-HT)和去甲肾上腺素(NE)重摄取抑制剂药效团模型的建立及比较分析

近年来的研究表明, 去甲肾上腺素(NE)能系统和5-羟色胺(5-HT)能系统可能共同参与了抑郁症的发病机制. 采用Catalyst软件的Hypogen方法, 利用22个不同结构类型的5-HT重摄取抑制剂和19个不同结构类型和活性的NE重摄取抑制剂分别建立了5-HT药效团模型和NE药效团模型, 它们的相关系数分别为0.935, 0.844, 这表明所得到的模型能较好地表征重摄取抑制剂化合物的特征; 此外, 我们还选择了四种不同活性的预测集分别对所建立的药效团模型进行检验, 结果表明所建立的药效团模型具有较好的预测能力. 对这两个药效团模型进行了比较分析, 其结果可以为设计高活性的双重5-HT和NE重摄取抑制剂提供依据.     

α1A-亚型肾上腺素受体拮抗剂3D药效团模型的研究

运用Catalyst软件以34个α_1A-AR拮抗剂分子为训练集, 构建了包含一个氢键受体、一个正电中心和一个芳环中心的三元素药效团模型, 线性回归相关系数为0.89. 经13个分子组成的测试集验证该药效团模型具有较好的活性预测能力, 为寻找新的α_1A-AR拮抗剂分子提供了理论基础.     

新型5-HT重摄取抑制剂的设计、合成及活性评价

在对已知各种结构类型的5-HT重摄取抑制剂分子结构全面分析的基础上, 建立了SSRIs药效团模型. 基于该模型应用UNITY程序对NCI-3D和Maybridge-3D数据库进行三维结构的限制性查询, 在获得的命中结构的信息指导下, 设计合成了3种全新结构类型的化合物, 并完成了初步的药理活性评价. 这些化合物均显示出不同程度的5-HT重摄取抑制活性, 其中5个化合物显示高抑制活性. 哌嗪取代的二苯脒类化合物的结构新颖, 较好地符合5-HT重摄取抑制剂药效团模型, 与SSRIs类化合物三维定量构效关系研究得到的CoMFA模型有较好的适配性.     

黄酮类醛糖还原酶抑制剂的抑制机理研究

为了研究黄酮类醛糖还原酶抑制剂的抑制机理, 选择了31个黄酮类化合物作为训练集, 使用Catalyst软件包构建了此类抑制剂的药效团模型. 并专门针对黄酮类化合物定制了氢键给体和受体模型, 效果优于使用Catalyst内预定义的模型. 最终的药效团模型由两个氢键给体和一个氢键受体组成, 对训练集具有较好预测能力(Correl=0.9013). 此外, 使用InsightII/Affinity对6个黄酮类化合物进行了分子对接研究. 综合药效团模型和分子对接研究的结果, 发现黄酮类化合物的抑制活性主要源于黄酮骨架上的C4’或C3’位的羟基与醛糖还原酶活性口袋中的TYR48、VAL47、GLN49和C7位的羟基与HIS110, TRP111所形成的两组氢键.     

Ligand-based molecular modeling study on a chemically diverse series of cholecystokinin-B/gastrin receptor antagonists: generation of predictive model

Pharmacophore hypotheses were developed for six structurally diverse series of cholecystokinin-B/gastrin receptor (CCK-BR) antagonists. A training set consisting of 33 compounds was carefully selected. The activity spread of the training set molecules was from 0.1 to 2100 nM. The most predictive pharmacophore model (hypothesis 1), consisting of four features, namely, two hydrogen bond donors, one hydrophobic aliphatic, and one hydrophobic aromatic feature, had a correlation (r) of 0.884 and a root-mean-square deviation of 1.1526, and the cost difference between null cost and fixed cost was 81.5 bits. The model was validated on a test set consisting of six different series of 27 structurally diverse compounds and performed well in classifying active and inactive molecules correctly. This validation approach provides confidence in the utility of the predictive pharmacophore model developed in this work as a 3D query tool in the virtual screening of drug-like molecules to retrieve new chemical entities as potent CCK-BR antagonists. The model can also be used to predict the biological activities of compounds prior to their costly and time-consuming synthesis.     

Pharmacophore Model Generation Based on Pyrrolidine- and Butane-derived CCR5 Antagonists

A three-dimensional pharmacophore model was developed for a considerable number of pyrrolidine-based and butane-based chemokine (C-C motif) receptor 5 (CCR5) antagonists, which can block the entry of human immunodeficiency virus type 1 (HIV-1) by inhibiting the interaction of HIV-1 envelope protein and CCR5. The pharmacophore model was generated using a training set consisting of 25 carefully selected antagonists with the diverse molecular architecture and bioactivity, as required by the Catalyst/HypoGen program. The activity of the training set molecules expressed in IC₅₀ (half-inhibitory concentration) covered from 0.06 to 10000 nmol·L^–1. The most predictive pharmacophore model (Hypo 1), consisting of two positive ionizable points and three hydrophobic groups, had a correlation of 0.924 and a root mean square of 1.068, and a cost difference of 63.67 bits between the null cost and the total cost. The model was applied in predicting the activity of 74 compounds as a test set. The results indicated that the model was able to provide clear guidelines and accurate activity prediction for novel antagonist design.     

β分泌酶抑制剂的药效团模型研究

选择活性跨越0.002至25 μmol•L－1的4类共25个β分泌酶抑制剂作为训练集, 使用Catalyst软件包构建出药效团模型, 并通过对药效团的有效性分析, 筛选得到的最佳模型(correlCorrel＝0.969, Config＝16.32, Δcost＝62.422)由一个环芳香性、一个疏水中心、一个正电荷中心和一个氢键供体组成. 并用其它209个抑制剂组成测试集对模型进行验证, 结果表明该模型显示出较强的预测能力, 能够为进一步的数据库搜索, 寻找新型的β分泌酶抑制剂先导物提供依据.     

Toward the identification of a reliable 3D QSAR pharmacophore model for the CCK2 receptor antagonism

The present study describes application of computational approaches to identify a validated and reliable 3D QSAR pharmacophore model for the CCK-2R antagonism through integrated ligand and structure based studies using anthranilic sulfonamide and 1,3,4-benzotriazepine based CCK-2R antagonists. The best hypothesis consisted five features viz. two aliphatic hydrophobic, one aromatic hydrophobic, one H-bond acceptor, and one ring aromatic feature with an excellent correlation for 34 training set (r2(training) = 0.83) and 58 test set compounds (r2(test) = 0.74). This model was validated through F-test and docking studies at the active site of the plausible CCK-2R where the 99% significance and well corroboration with the pharmacophore model respectively describes the model's reliability. The model also predicts well to other known clinically effective CCK-2R antagonists. Therefore, the developed model may useful in finding new scaffolds that may aid in design and develop new chemical entities (NCEs) as potent CCK-2R antagonists before their synthesis.     

Molecular design based on 3D pharmacophores. Applications to 5-HT7 receptors

A definition of a pharmacophore for the 5-HT7 antagonists was carried out by searching the common chemical features of selective antagonists from the literature. A molecular design is described by analyzing the differences between this new pharmacophore and three other 3D serotonin pharmacophores previously described. This comparison led to the synthesis of a new series of potent 5-HT7 antagonists.     

3D-pharmacophore models for selective A2A and A2B adenosine receptor antagonists

Three-dimensional pharmacophore models were generated for A2A and A2B adenosine receptors (ARs) based on highly selective A2A and A2B antagonists using the Catalyst program. The best pharmacophore model for selective A2A antagonists (Hypo-A2A) was obtained through a careful validation process. Four features contained in Hypo-A2A (one ring aromatic feature (R), one positively ionizable feature (P), one hydrogen bond acceptor lipid feature (L), and one hydrophobic feature (H)) seem to be essential for antagonists in terms of binding activity and A2A AR selectivity. The best pharmacophore model for selective A2B antagonists (Hypo-A2B) was elaborated by modifying the Catalyst common features (HipHop) hypotheses generated from the selective A2B antagonists training set. Hypo-A2B also consists of four features: one ring aromatic feature (R), one hydrophobic aliphatic feature (Z), and two hydrogen bond acceptor lipid features (L). All features play an important role in A2B AR binding affinity and are essential for A2B selectivity. Both A2A and A2B pharmacophore models have been validated toward a wide set of test molecules containing structurally diverse selective antagonists of all AR subtypes. They are capable of identifying correspondingly high potent antagonists and differentiating antagonists between subtypes. The results of our study will act as a valuable tool for retrieving structurally diverse compounds with desired biological activities and designing novel selective adenosine receptor ligands.