Mild and Selective Catalytic Hydrogenation of the C=C Bond in α,β‐Unsaturated Carbonyl Compounds Using Supported Palladium Nanoparticles

Chemoselective reduction of the C=C bond in a variety of α,β‐unsaturated carbonyl compounds using supported palladium nanoparticles is reported. Three different heterogeneous catalysts were compared using 1 atm of H₂: 1) nano‐Pd on a metal–organic framework (MOF: Pd⁰‐MIL‐101‐NH₂(Cr)), 2) nano‐Pd on a siliceous mesocellular foam (MCF: Pd⁰‐AmP‐MCF), and 3) commercially available palladium on carbon (Pd/C). Initial studies showed that the Pd@MOF and Pd@MCF nanocatalysts were superior in activity and selectivity compared to commercial Pd/C. Both Pd⁰‐MIL‐101‐NH₂(Cr) and Pd⁰‐AmP‐MCF were capable of delivering the desired products in very short reaction times (10–90 min) with low loadings of Pd (0.5–1 mol %). Additionally, the two catalytic systems exhibited high recyclability and very low levels of metal leaching.     

Enhanced Photocatalytic Activity of MIL‐125 by Post‐Synthetic Modification with CrIII and Ag Nanoparticles

NH₂‐MIL‐125, [Ti₈O₈(OH)₄(bdc‐NH₂)₆] (bdc^2?=1,4‐benzene dicarboxylate) is a highly porous metal–organic framework (MOF) that has a band gap lying within the ultraviolet region at about 2.6 eV. The band gap may be reduced by a suitable post‐synthetic modification of the nanochannels using conventional organic chemistry methods. Here, it is shown that the photocatalytic activity of NH₂‐MIL‐125 in the degradation of methylene blue under visible light is remarkably augmented by post‐synthetic modification with acetylacetone followed by Cr^III complexation. The latter metal ion extends the absorption from the ultraviolet to the visible light region (band gap 2.21 eV). The photogenerated holes migrate from the MOF’s valence band to the Cr^III valence band, promoting the separation of holes and electrons and increasing the recombination time. Moreover, it is shown that the MOF’s photocatalytic activity is also much improved by doping with Ag nanoparticles, formed in situ by the reduction of Ag⁺ with the acetylacetonate pendant groups (the resulting MOF band gap is 2.09 eV). Presumably, the Ag nanoparticles are able to accept the MOF’s photogenerated electrons, thus avoiding electron–hole recombination. Both, the Cr‐ and Ag‐bearing materials are stable under photocatalytic conditions. These findings open new avenues for improving the photocatalytic activity of MOFs.     

Influence of the Base on Pd@MIL‐101‐NH2(Cr) as Catalyst for the Suzuki–Miyaura Cross‐Coupling Reaction

The chemical stability of metal–organic frameworks (MOFs) is a major factor preventing their use in industrial processes. Herein, it is shown that judicious choice of the base for the Suzuki–Miyaura cross‐coupling reaction can avoid decomposition of the MOF catalyst Pd@MIL‐101‐NH₂(Cr). Four bases were compared for the reaction: K₂CO₃, KF, Cs₂CO₃ and CsF. The carbonates were the most active and achieved excellent yields in shorter reaction times than the fluorides. However, powder XRD and N₂ sorption measurements showed that the MOF catalyst was degraded when carbonates were used but remained crystalline and porous with the fluorides. XANES measurements revealed that the trimeric chromium cluster of Pd@MIL‐101‐NH₂(Cr) is still present in the degraded MOF. In addition, the different countercations of the base significantly affected the catalytic activity of the material. TEM revealed that after several catalytic runs many of the Pd nanoparticles (NPs) had migrated to the external surface of the MOF particles and formed larger aggregates. The Pd NPs were larger after catalysis with caesium bases compared to potassium bases.     

Long‐Term Photostability in Terephthalate Metal–Organic Frameworks

Prolonged (weeks) UV/Vis irradiation under Ar of UiO‐66(Zr), UiO66 Zr‐NO₂, MIL101 Fe, MIL125 Ti‐NH₂, MIL101 Cr and MIL101 Cr(Pt) shows that these MOFs undergo photodecarboxylation of benzenedicarboxylate (BDC) linker in a significant percentage depending on the structure and composition of the material. Routine characterization techniques such as XRD, UV/Vis spectroscopy and TGA fail to detect changes in the material, although porosity and surface area change upon irradiation of powders. In contrast to BCD‐containing MOFs, zeolitic imidazolate ZIF‐8 does not evolve CO₂ or any other gas upon irradiation.     

Thermo‐Responsive MOF/Polymer Composites for Temperature‐Mediated Water Capture and Release

We report an in situ polymerization strategy to incorporate a thermo‐responsive polymer, poly(N‐isopropylacrylamide) (PNIPAM), with controlled loadings into the cavity of a mesoporous metal–organic framework (MOF), MIL‐101(Cr). The resulting MOF/polymer composites exhibit an unprecedented temperature‐triggered water capture and release behavior originating from the thermo‐responsive phase transition of the PNIPAM component. This result sheds light on the development of stimuli‐responsive porous adsorbent materials for water capture and heat transfer applications under relatively mild operating conditions.     

Comparisons of glyphosate adsorption properties of different functional Cr‐based metal–organic frameworks

A Cr‐based metal–organic framework, namely, MIL‐101(Cr), was modified with amino (NH₂–) and urea (UR₂–) groups, and the materials were evaluated as adsorbents for glyphosate, and a comparison with commercial activated carbon was also discussed. The effects of the adsorption factors, such as adsorbent concentration, adsorption time, pH and ionic strength were mainly investigated. The results showed that a pseudo‐second‐order rate equation described the adsorption kinetics mechanisms well, while the Langmuir model and the Freundlich model fitted different adsorption isotherms, respectively. Among the adsorbents we studied, NH₂‐MIL‐101(Cr) showed the maximum adsorbing capacity, which is 64.25 mg/g when pH = 3.0, while UR₂‐MIL‐101(Cr) did not reach the best adsorption performance due to the steric hindrance. The work opens up a new way for the modification of metal–organic frameworks for adsorption process.     

Synthesis of chromene derivatives in the presence of mordenite zeolite/MIL‐101 (Cr) metal–organic framework composite as catalyst

In the present study, the synthesis of mordenite zeolite/MIL‐101(Cr) metal–organic framework (MOF) composite [MOR/MIL‐101(Cr)] using the ship in a bottle method was suggested. The properties of prepared composite and individual MOF and MOR zeolite were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption measurement, and thermogravimetric analysis (TGA). The XRD results indicated diffraction peaks for each compound (MOR and MOF) in composite. The SEM and TEM images showed the formation of plates MOR (with size of 2.5 × 3 μm) along with spherical particles MIL‐101. The Brunauer–Emmett–Teller results showed that the surface area of the composite was smaller than individual MOF and MOR zeolite. Based on TGA plots, the hybrid zeolite/MOF composite was more thermally stable compared with the isolated MIL‐101(Cr). The composite was functionalized by post‐synthetic modification to obtain acid–base bifunctionality (H‐MOR/MIL‐101‐ED) for the synthesis of chromene derivatives. The acidity from framework Al‐O(H)‐Si sites in MOR and basicity from amine groups in MIL‐101 were obtained by post‐synthetic modification.     

Mechanochemical Immobilisation of Metathesis Catalysts in a Metal–Organic Framework

A simple, one‐step mechanochemical procedure for immobilisation of homogeneous metathesis catalysts in metal–organic frameworks was developed. Grinding MIL‐101‐NH₂(Al) with a Hoveyda–Grubbs second‐generation catalyst resulted in a heterogeneous catalyst that is active for metathesis and one of the most stable immobilised metathesis catalysts. During the mechanochemical immobilisation the MIL‐101‐NH₂(Al) structure was partially converted to MIL‐53‐NH₂(Al). The Hoveyda–Grubbs catalyst entrapped in MIL‐101‐NH₂(Al) is responsible for the observed catalytic activity. The developed synthetic procedure was also successful for the immobilisation of a Zhan catalyst.     

Noble Metals Can Have Different Effects on Photocatalysis Over Metal–Organic Frameworks (MOFs): A Case Study on M/NH2‐MIL‐125(Ti) (M=Pt and Au)

M‐doped NH₂‐MIL‐125(Ti) (M=Pt and Au) were prepared by using the wetness impregnation method followed by a treatment with H₂ flow. The resultant samples were characterized by powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), X‐ray absorption fine structure (XAFS) analyses, N₂‐sorption BET surface area, and UV/Vis diffuse reflectance spectroscopy (DRS). The photocatalytic reaction carried out in saturated CO₂ with triethanolamine (TEOA) as sacrificial agent under visible‐light irradiations showed that the noble metal‐doping on NH₂‐MIL‐125(Ti) promoted the photocatalytic hydrogen evolution. Unlike that over pure NH₂‐MIL‐125(Ti), in which only formate was produced, both hydrogen and formate were formed over Pt‐ and Au‐loaded NH₂‐MIL‐125(Ti). However, Pt and Au have different effects on the photocatalytic performance for formate production. Compared with pure NH₂‐MIL‐125(Ti), Pt/NH₂‐MIL‐125(Ti) showed an enhanced activity for photocatalytic formate formation, whereas Au has a negative effect on this reaction. To elucidate the origin of the different photocatalytic performance, electron spin resonance (ESR) analyses and density functional theory (DFT) calculations were carried out over M/NH₂‐MIL‐125(Ti).The photocatalytic mechanisms over M/NH₂‐MIL‐125(Ti) (M=Pt and Au) were proposed. For the first time, the hydrogen spillover from the noble metal Pt to the framework of NH₂‐MIL‐125(Ti) and its promoting effect on the photocatalytic CO₂ reduction is revealed. The elucidation of the mechanism on the photocatalysis over M/NH₂‐MIL‐125(Ti) can provide some guidance in the development of new photocatalysts based on MOF materials. This study also demonstrates the potential of using noble metal‐doped MOFs in photocatalytic reactions involving hydrogen as a reactant, like hydrogenation reactions.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

Elimination of 4‐chlorophenol in aqueous solution by the Novel Pd/MIL‐101(Cr)‐Hydrogen‐Accelerated catalytic fenton system

Excessive consumption of Fe (II) and massive generation of sludge containing Fe (III) from classic Fenton process remains a major obstacle for its poor recycling of Fe (III) to Fe (II). Therefore, the MHACF‐MIL‐101(Cr) system, by introducing H₂, Pd⁰ and MIL‐101(Cr) into Fenton reaction system, was developed at normal temperature and pressure. In this system, the reduction of Fe^III back to Fe^II by solid catalyst Pd/MIL‐101(Cr) for the storage and activation of H₂, was accelerated significantly by above 10‐fold and 5‐fold controlled with the H₂‐MIL‐101(Cr) system and H₂‐Pd⁰ system, respectively. However, the concentration of Fe (II) generated by the reduction of Fe (III) could not be detected with the only input of H₂ and without the addition of MOFs material. In addition, the apparent consumption of Fe (II) in MHACF‐MIL‐101(Cr) system was half of that in classical Fenton system, while more Fe (II) might be reused infinitely in fact. Accordingly, only trace amount of Fe (II) vs H₂O₂ concentration was needed and hydroxyl radicals through the detection of para‐hydroxybenzoic acid (p‐HBA) as the oxidative product of benzoic acid (BA) by·OH could be continuously generated for the effective degradation of 4‐chlorophenol(4‐CP). The effects of initial pH, concentration of 4‐CP, dosage of Fe²⁺, H₂O₂ and Pd/MIL‐101(Cr) catalyst, Pd content and H₂ flow were investigated, combined with systematic controlled experiments. Moreover, the robustness and morphology change of Pd/MIL‐101(Cr) were thoroughly analyzed. This study enables better understanding of the H₂‐mediated Fenton reaction enhanced by Pd/MIL‐101(Cr) and thus, will shed new light on how to accelerate Fe (III)/Fe (II) redox cycle and develop more efficient Fenton system.     

Evidence of Photoinduced Charge Separation in the Metal–Organic Framework MIL‐125(Ti)‐NH2

Herein, we describe the photochemical behavior of the porous metal–organic framework MIL‐125(Ti)‐NH₂, built up from cyclic Ti₈O₈(OH)₄ oxoclusters and 2‐aminoterephthalate ligands. While MIL‐125(Ti)‐NH₂ does not emit upon excitation at 420 nm, laser flash photolyses of dry samples (diffuse reflectance) or aqueous suspensions (transmission) of the solid have allowed detecting a transient characterized by a continuous absorption from 390 to 820 nm decaying in the sub‐millisecond timescale, which is quenched by oxygen. This transient has been attributed to the charge‐separation state. Firm evidence for this assignment was obtained by lamp irradiation of aqueous suspensions of MIL‐125(Ti)‐NH₂ in the presence of electron‐donor (N,N,N′N′‐tetramethyl‐p‐phenylenediamine) or electron‐acceptor (methylviologen) probe molecules, which has allowed the visual detection of the corresponding radical ions, in agreement with the occurrence of photoinduced charge separation in MIL‐125(Ti)‐NH₂.     

Synthesis of nanoscale titania embedded in MIL‐101 for the adsorption and degradation of volatile pollutants with thermal desorption gas chromatography and mass spectrometry detection

Nanoscale anatase titania was embedded within the porous chromium terephthalate MIL‐101 under low‐temperature hydrothermal treatment. The metal–organic framework shell acting as host matrix can effectively prevent the titania nanoparticles from aggregating and enable a good dispersion of these nanoparticles. The X‐ray diffraction spectra, transmission electron micrography and X‐ray photoelectron spectra clearly showed successful impregnation of the nano‐sized anatase titania within the body of MIL‐101. The resulting TiO₂/MIL‐101 nanocomposite was considered as bifunctional material with abundant adsorptive domains and catalytic domains, and was packed in a quartz tube as a convenient trapping and photocatalytic reactor for hazardous volatile pollutants. The composite showed great potential for adsorptive and photocatalytic degradation of these volatile pollutants, such as formaldehyde and o‐xylene, which were online monitored by thermal desorption gas chromatography with mass spectrometric detection.     

Nanoscale Metal–Organic Framework–Hemoglobin Conjugates

A metal–organic framework (MOF)–protein conjugate, NH₂‐MIL‐125(Ti)‐hemoglobin [MIL‐125(Ti)‐Hb], was synthesized by a covalent postmodification strategy. The crystalline structure was maintained after chemical and protein modification. The content of grafted Hb was tuned by the stoichiometric ratio and reached 50 wt % if the mass ratio of MIL‐125(Ti)/Hb was 1:1.25 in the feed. The oxygen‐transporting capacity of grafted Hb was kept, and the P₅₀ (the half O₂ pressure saturated with O₂) and Hill coefficients of the MIL‐125(Ti)‐Hb conjugate were found to be 22.9 mm Hg and 2.35, respectively, which are close to the respective values of free Hb. All the results indicate that the MIL‐125(Ti)‐Hb conjugate could be potentially used as an oxygen carrier.     

Incorporation of metal‐organic framework amino‐modified MIL‐101 into glycidyl methacrylate monoliths for nano LC separation

Metal‐organic frameworks consisting of amino‐modified MIL‐101(M: Cr, Al, and Fe) crystals have been synthesized and subsequently incorporated to glycidyl methacrylate monoliths to develop novel stationary phases for nano‐liquid chromatography. Two incorporation approaches of these materials in monoliths were explored. The metal‐organic framework materials were firstly attached to the pore surface through reaction of epoxy groups present in the parent glycidyl methacrylate‐based monolith. Alternatively, NH₂‐MIL‐101(M) were admixed in the polymerization mixture. Using short time UV‐initiated polymerization, monolithic beds with homogenously dispersed metal‐organic frameworks were obtained. The chromatographic performance of embedded UV‐initiated composites was demonstrated with separations of polycyclic aromatic hydrocarbons and non‐steroidal anti‐inflammatory drugs as test solutes. In particular, the incorporation of the NH₂‐MIL‐101(Al) into the organic polymer monoliths led to an increase in the retention of all the analytes compared to the parent monolith. The hybrid monolithic columns also exhibited satisfactory run‐to‐run and column‐to‐column reproducibility.     

Magnetic iron(III)‐based framework composites for the magnetic solid‐phase extraction of fungicides from environmental water samples

We adopted a facile hydrofluoric acid‐free hydro‐/solvothermal method for the preparation of four magnetic iron(III)‐based framework composites (MIL‐101@Fe₃O₄‐COOH, MIL‐101‐NH₂@Fe₃O₄‐COOH, MIL‐53@Fe₃O₄‐COOH, and MIL‐53‐NH₂@Fe₃O₄‐COOH). The obtained four magnetic iron(III)‐based framework composites were applied to magnetic separation and enrichment of the fungicides (prochloraz, myclobutanil, tebuconazole, and iprodione) from environmental samples before high‐performance liquid chromatographic analysis. MIL‐101‐NH₂@Fe₃O₄‐COOH showed more remarkable pre‐concentration ability for the fungicides as compared to the other three magnetic iron(III)‐based framework composites. The extraction parameters affecting enrichment efficiency including extraction time, sample pH, elution time, and the desorption solvent were investigated and optimized. Under the optimized conditions, the standard curve of correlation coefficients were all above 0.991, the limits of detection were 0.04–0.4 μg/L, and the relative standard deviations were below 10.2%. The recoveries of two real water samples ranged from 71.1–99.1% at the low spiking level (30 μg/L). Therefore, the MIL‐101‐NH₂@Fe₃O₄‐COOH composites are attractive for the rapid and efficient extraction of fungicides from environmental water samples.     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Encapsulation of a Porous Organic Cage into the Pores of a Metal–Organic Framework for Enhanced CO2 Separation

We present a facile approach to encapsulate functional porous organic cages (POCs) into a robust MOF by an incipient‐wetness impregnation method. Porous cucurbit[6]uril (CB6) cages with high CO₂ affinity were successfully encapsulated into the nanospace of Cr‐based MIL‐101 while retaining the crystal framework, morphology, and high stability of MIL‐101. The encapsulated CB6 amount is controllable. Importantly, as the CB6 molecule with intrinsic micropores is smaller than the inner mesopores of MIL‐101, more affinity sites for CO₂ are created in the resulting CB6@MIL‐101 composites, leading to enhanced CO₂ uptake capacity and CO₂/N₂, CO₂/CH₄ separation performance at low pressures. This POC@MOF encapsulation strategy provides a facile route to introduce functional POCs into stable MOFs for various potential applications.     

Mixed‐Metal MIL‐100(Sc,M) (M=Al,Cr, Fe) for Lewis Acid Catalysis and Tandem CC Bond Formation and Alcohol Oxidation

The trivalent metal cations Al³⁺, Cr³⁺, and Fe³⁺ were each introduced, together with Sc³⁺, into MIL‐100(Sc,M) solid solutions (M=Al, Cr, Fe) by direct synthesis. The substitution has been confirmed by powder X‐ray diffraction (PXRD) and solid‐state NMR, UV/Vis, and X‐ray absorption (XAS) spectroscopy. Mixed Sc/Fe MIL‐100 samples were prepared in which part of the Fe is present as α‐Fe₂O₃ nanoparticles within the mesoporous cages of the MOF, as shown by XAS, TGA, and PXRD. The catalytic activity of the mixed‐metal catalysts in Lewis acid catalysed Friedel–Crafts additions increases with the amount of Sc present, with the attenuating effect of the second metal decreasing in the order Al>Fe>Cr. Mixed‐metal Sc,Fe materials give acceptable activity: 40 % Fe incorporation only results in a 20 % decrease in activity over the same reaction time and pure product can still be obtained and filtered off after extended reaction times. Supported α‐Fe₂O₃ nanoparticles were also active Lewis acid species, although less active than Sc³⁺ in trimer sites. The incorporation of Fe³⁺ into MIL‐100(Sc) imparts activity for oxidation catalysis and tandem catalytic processes (Lewis acid+oxidation) that make use of both catalytically active framework Sc³⁺ and Fe³⁺. A procedure for using these mixed‐metal heterogeneous catalysts has been developed for making ketones from (hetero)aromatics and a hemiacetal.     

Nano palladium supported on high‐surface‐area metal–organic framework MIL‐101: an efficient catalyst for Sonogashira coupling of aryl and heteroaryl bromides with alkynes

Palladium nanoparticle‐incorporated metal–organic framework MIL‐101 (Pd/MIL‐101) was successfully synthesized and characterized using X‐ray diffraction, nitrogen physisorption, X‐ray photoelectron, UV–visible and infrared spectroscopies, and transmission electron microscopy. The characterization techniques confirmed high porosity and high surface area of MIL‐101 and high stability of nano‐size palladium particles. Pd/MIL‐101 nanocomposite was investigated for the Sonogashira cross‐coupling reaction of aryl and heteroaryl bromides with various alkynes under copper‐free conditions. The reusability of the catalyst was tested for up to four cycles without any significant loss in catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.