不对称苯并菲盘状液晶的合成及取代基对介晶性的影响

合成了一系列新型含间位二硝基苯甲酸酯不对称苯并菲盘状液晶化合物2-(3,5-二硝基苯甲酰氧基)-3,6,7,10,11-五烷氧基苯并菲(3a～3f). 通过偏光显微镜(POM)和差示扫描量热计(DSC)对其介晶性进行了研究. 结果显示: 此类化合物有高的清亮点, 稳定的六方柱状相以及较宽的介晶相范围, 且随着软链碳原子数的增加, 化合物的熔点和清亮点均出现下降趋势, 但六方柱状相的有序性却没有发生很明显的变化. 同时通过与其它三类苯并菲盘状液晶2-苯甲酰氧基-3,6,7,10,11-五烷氧基苯并菲(4a～4f), 2-二茂铁甲酰氧基-3,6,7,10,11-五烷氧基苯并菲(5a～5f), 2,3,6,7,10,11-六烷氧基苯并菲(6a～6f)的对比研究, 探讨了酯基, 强吸电子基团, 以及取代官能团体积对介晶性的影响. 证实了苯并菲化合物中分子结构小的变化将引起介晶性大的改变.     

二乙炔桥连苯并菲盘状液晶二聚体的合成及其介晶性

通过桥链将2个盘状介晶基元相连,不仅可以稳定盘状液晶柱状相,还有利于玻璃态柱状相的形成,提高盘状液晶作为有机半导体材料的实用性．为此,通过铜盐催化的Eglinton偶联反应合成了8个二乙炔桥连的苯并菲盘状液晶二聚体化合物[C18H6（OCnH2n＋1）4（OMe）O2C—C8H16-C--C-]2,3（n）,（n=4-8）,[C18H6（OC6H13）5O2C—C8H16-C-C-]2,（6）和[C18H6（oc6H13）5O-（CH2）m-C-=C-]2,8（m）,（m=1,3）．差示扫描量热法（DSC）和热台偏光显微镜（POM）对其介晶性进行研究发现：（1）苯并菲周边柔链长度对液晶二聚体化合物的介品性有影响;（2）二聚体化合物3（n）和6具有玻璃态柱状相,并且所有苯并菲二聚体化合物在降温至-50℃均未出现结晶现象;（3）与二聚体3（6）相比,分子对称性较高的化合物6具有较稳定的柱状相,及较宽的介晶温度范围;（4）连接基、中心桥链的长度和刚性对苯并菲盘状液晶二聚体介晶性有重要影响．     

含胆固醇和 4-(反式-正烷基环己基)苯甲酸结构单元的双液晶基元液晶化合物的合成及其性质

本文合成了一系列含有胆固醇和4-（反式-正烷基环己基）苯甲酸结构单元的新型双液晶基元液晶化合物。这些化合物中两个介晶基元是利用不同长度的氧烷酰基连接在一起。利用FT-IR、MS、1H NMR、POM、DSC 表证了所得化合物的结构和介晶性,并选择几种双液晶基元液晶测定了它们的机械黏度和在主体液晶中的螺旋扭曲力（HTP)。结果表明,绝大多数化合物显示较低相变温度的胆甾相（N*）,并且被选择的化合物的平均机械黏度和螺旋扭曲力类似于或优于胆甾醇任酸酯。     

一代树状碳硅烷液晶研究-端基含12个4-硝基偶氮苯介晶基元

用发散法合成了以四碳硅烷为核心，周边含12个4-硝基偶氮苯介晶基元（M5） 端基的新的一代树状碳硅烷（D1）液晶，并用元素分析、核磁共振、基质辅助激光 解吸离子化飞行时间质谱（MALDI-TOF-MS）、红外、紫外、偏光显微镜、差示扫描 量热（DSC）和X射线衍射法（WAXD）表征。介晶基元化合物（M5）显示向列相，树 状物D1显示胆甾相和S_E相。D1的液晶相相行为是K70Ch188I185Ch58S_E-48K。     

端基含36个4-硝基偶氮苯介晶基元的二代树状碳硅烷的液晶性研究

液晶树状物的液晶相态分别为SA相、SC相、SC^*相、向列相、胆甾相、盘状相、立方相和群聚向列相,而SE相液晶树状物尚未见报道,本文报道含吸电性端基(硝基)偶氮苯介晶基元二代树状物(D2)的液晶行为。     

具有不同柱状结构的苯并菲盘状液晶化合物的合成及自组装

合成了3种含有不同长度烷基链的苯并菲盘状液晶化合物; 通过1H NMR 和 MALDI-TOF MS对其结构进行了表征; 利用差示扫描量热法(DSC)、热台偏光显微镜(POM)和小角X射线散射实验(SAXS)对3种液晶化合物的自组装行为进行了研究. 结果表明, 烷基链的长度对苯并菲盘状液晶化合物自组装结构的影响显著. 柔性链为辛基的苯并菲盘状液晶化合物自组装成六方柱状液晶相; 柔性链为十二烷基的化合物自组装成倾斜柱状液晶相; 而柔性链为十六烷基的化合物则未形成液晶相.     

氢键稳定的苯并菲盘状液晶的合成及介晶性

盘状液晶分子能自组装成高度有序的六方柱状介晶相. 其各向异性的载流子高速迁移率使其成为较理想的有机光电子材料. 采用分子间氢键锚定柱状相, 获得介晶相温度范围宽、有序度高的苯并菲盘状液晶是本研究的目的. 本文通过分子设计, 合成了3个系列, 共18个有两种不同软链的苯并菲盘状液晶化合物C₁₈H₆(OR)₅(OCH₂COOEt), C₁₈H₆(OR)₅(OCH₂COOBu)和C₁₈H₆(OR)₅(OCH₂CONHBu), 其中R＝C_nH_2n＋1, n＝4～9. 化合物的纯度和结构通过¹H NMR和元素分析确证. 化合物热稳定性通过热重分析(TGA)测定, 并显示出较高的热稳定性. 通过偏光显微镜(POM)和差示扫描量热法(DSC)对这些化合物的热致液晶性进行了研究. 结果显示对于分子中含有酰胺基的苯并菲液晶化合物C₁₈H₆(OR)₅(OCH₂CONHBu), 与具有同样软链长度的分子中不含酰胺键的化合物系列C₁₈H₆(OR)₅(OCH₂COOBu)相比较, 前者由于柱内分子间氢键的形成, 具有更高的熔点和清亮点.     

官能化苯并菲盘状液晶的合成及不饱柔链对介晶性的影响

合成了12个含不饱和软链的苯并菲盘状液晶化合物,C18H6（OC5H11）6-x（OR）x（x=1,2,3）,R=-C3H6CH=CH2（a）,-C3H6C≡CH（b）,-C2H4OCH=CH2（c）.化合物结构通过核磁共振氢谱和高分辨质谱表征.化合物热致液晶性通过偏光显微镜（POM）,差视扫描热量法（DSC）,和X射线衍射（XRD）进行了研究.结果显示目标化合物呈现有序的六方柱状介晶相.端炔基链化合物b系列熔点最高.乙烯氧基柔链化合物c系列有最高的清亮点和最宽的介晶性温度范围,且随着不饱和醚链数的增多,清亮点明显升高.对称苯并菲化合物sym-C18H6（OC5H11）3（OR）3比不对称化合物asym-C18H6（OC5H11）3（OR）3具有更高的熔点和清亮点.乙烯氧基柔链可极化的偶极相互作用对液晶稳定性有较大贡献.     

端基含108个己氧基偶氮苯介晶基元三代树状碳硅烷液晶研究

用发散法合成以四碳硅烷为核心,周边含108个己氧基偶氮苯介晶基元(M3)端基的三代树状碳硅烷(D3)液晶,并用元素分析、核磁共振、激光解吸电离飞行时间质谱、红外光谱、紫外光谱、偏光显微镜、差示扫描量热(DSC)和X射线衍射法(WAXD)进行表征.D3为向列相液晶,与M3相同,三代(D3)、二代(D2)和一代(D1)树状物的相态由介晶基元的相态决定.D3的液晶态相行为是K79N136I132N,D3的熔点比M3的低19℃,D3的清亮点比M3的增加16℃,D3液晶态温区比M3宽35℃.     

二代树状碳硅烷液晶研究——端基含36个己氧基偶氮苯介晶基元

用发散法合成周边含36个己氧基偶氮苯介晶基元(M3)端基的新的二代树状碳硅烷液晶(D2),并用元素分析、氢谱、激光质谱、红外光谱、紫外-可见光谱、偏光显微镜,DSC和WAXD法进行表征.D2为向列相,与M3相同.D2液晶态相行为是K90N105I1l3N75K,D2熔点比M3降低2633℃,D2清亮点比M3降低315℃,D2液晶态温区比M3加宽1130℃.D2和一代树状物D1的相态由介晶基元相态决定.D2熔点比D1降低23℃.D2清亮点比D1降低1121℃,D2液晶态温区比D1减少819℃.     

Higher Aliphatic Aldehyde Polymers. V. Cyclic Trimers of C9 to C12, Normal Aliphatic Aldehydes

Cyclic trimers of n-nonaldehyde (NA), n-decaldehyde (DA), n-undecaldehyde, (UA) and n-dodecaldehyde (DDA) were prepared by reacting the individual aldehydes with protic or Lewis acids. Higher aliphatic aldehydes whose long paraffinic chains dominate the general properties of these compounds do not trimerize readily the trimers, when formed, are purified with difficulty. The cyclic trimers, characterized by IR and NMR spectroscopy, are exclusively the cis isomers and commonly exist in all equatorial conformations. The melting behavior of the cyclic trimers was studied by DSC. The melting endotherms and the enthalpies of fusion increase with increasing chain length. Although the melting temperatures of the cyclic trimers are similar to the melting range of the side-chain crystallization of the corresponding crystalline isotactic polyaldehydes, the transition peaks of the trimers are single peaks and much sharper than the corresponding polymer peaks.     

Synthesis of disk-rod-disk liquid crystal trimers by using click chemistry

A series of disk-rod-disk liquid crystal trimers were synthesized.CuI-NEt3 catalyzed alkyne azide cycloaddition in toluene at room temperature connected two triphenylene discogens to a biphenyl rod-shaped mesogen.The trimers were characterized by using 1H NMR,IR,and high resolution mass spectrometry.The mesomorphic properties were investigated using polarized optical microscopy(POM) ,differential scanning calorimetry(DSC) ,and wide-angle X-ray diffraction.The results showed that the trimers exhibited rectan...     

The long-range non-additive three-body dispersion interactions for the rare gases, alkali, and alkaline-earth atoms

The long-range non-additive three-body dispersion interaction coefficients Z(111), Z(112), Z(113), and Z(122) are computed for many atomic combinations using standard expressions. The atoms considered include hydrogen, the rare gases, the alkali atoms (up to Rb), and the alkaline-earth atoms (up to Sr). The term Z(111) arising from three mutual dipole interactions is known as the Axilrod-Teller-Muto coefficient or the DDD (dipole-dipole-dipole) coefficient. Similarly, the terms Z(112), Z(113), and Z(122) arise from the mutual combinations of dipole (1), quadrupole (2), and octupole (3) interactions between atoms and they are sometimes known, respectively, as dipole-dipole-quadrupole, dipole-dipole-octupole, and dipole-quadrupole-quadrupole coefficients. Results for the four Z coefficients are given for the homonuclear trimers, for the trimers involving two like-rare-gas atoms, and for the trimers with all combinations of the H, He, and Li atoms. An exhaustive compilation of all coefficients between all possible atomic combinations is presented as supplementary data.     

Evaluation of ion mobility spectroscopy for determining charge-solvated versus salt-bridge structures of protonated trimers

The cross sections of five different protonated trimers consisting of two base molecules and trifluoroacetic acid were measured by using ion mobility spectrometry. The gas-phase basicities of these five base molecules span an 8-kcal/mol range. These cross sections are compared with those determined from candidate low-energy salt-bridge and charge-solvated structures identified by using molecular mechanics calculations using three different force fields: AMBER*, MMFF, and CHARMm. With AMBER*, the charge-solvated structures are all globular and the salt-bridge structures are all linear, whereas with CHARMm, these two forms of the protonated trimers can adopt either shape. Globular structures have smaller cross sections than linear structures. Conclusions about the structure of these protonated trimers are highly dependent on the force field used to generate low-energy candidate structures. With AMBER*, all of the trimers are consistent with salt-bridge structures, whereas with MMFF the measured cross sections are more consistent with charge-solvated structures, although the assignments are ambiguous for two of the protonated trimers. Conclusions based on structures generated by using CHARMm suggest a change in structure from charge-solvated to salt-bridge structures with increasing gas-phase basicity of the constituent bases, a result that is most consistent with structural conclusions based on blackbody infrared radiative dissociation experiments for these protonated trimers and theoretical calculations on the uncharged base-acid pairs.     

Triangular halogen trimers. A DFT study of the structure, cooperativity, and vibrational properties

Triangular halogen trimers (RX)3, where X = Br, I and R represents H, H3C, H2FC, HF2C, F3C, CH2=CH, CH[triple bond]C, and Ph, have been investigated using the density functional theory in the Perdew, Burke, and Ernzerhof method. We report herein the optimized geometries of the stable structures, their vibrational frequencies, and binding energies with the two- and three-body terms. All trimer structures possess a cyclic array of halogen atoms in the type II approach by virtue of the nonspherical atomic charge distribution around the halogens. The Br...Br interactions in trimers are very weak, whereas the I...I interactions in trimers are relatively stronger. While all bromine trimers and most of iodine trimers are predicted to be noncooperative, three of iodine trimers show weak cooperativity. The analysis of vibration modes reveals that all halogen trimers exhibit no especially remarkable frequency shifts. It is also shown that the electrostatic contribution plays a major role in the halogen...halogen interactions in halogen trimers. In contrast to bromine trimers, the relative contribution of charge-transfer component to the halogen...halogen interactions becomes more important for iodine trimers.     

Structural studies on alkylisocyanate polymers by thermal degradation tandem mass spectrometry

Homopolymers and copolymers of alkylisocyanates having n-hexyl, 2,6-dimethylheptyl, 3,7-dimethyloctyl, and (2,2-dimethyl-1,3-dioxolan-4-yl)methyl substituents underwent thermal degradation in the course of desorption electron ionization to yield trimers and monomers that were characterized in situ by tandem mass spectrometry. The trimers were trisubstituted cyanuric acids, the protonated molecules displaying a characteristic series of alkene eliminations on collision-induced dissociation to yield protonated cyanuric acid, m/ z 130. Confirmation of the identity of the pyrolysates was obtained by using two types of MS3 experiments: the reaction intermediate scan and the two-dimensional familial scan. The ion chemistry of the trimers and of the protonated monomer, the alkylisocyanate, was elucidated. Among the many interesting fragmentation processes undergone by the ionized trimers were a and 3 C-C bond cleavages and charge-remote fragmentations, which provided information on branching in the alkyl substituent. The dioxolane-containing substituent showed unique ion chemistry. The monomer distribution in the copolymers was deduced from the abundances of the various protonated trimers. The distribution was found to be random in all copolymers except that containing the dioxolane substituent.     

Anionic Snieckus-Fries rearrangement: solvent effects and role of mixed aggregates

Lithiated aryl carbamates (ArLi) bearing methoxy or fluoro substituents in the meta position are generated from lithium diisopropylamide (LDA) in THF, n-BuOMe, Me2NEt, dimethoxyethane (DME), N,N,N',N'-tetramethylethylenediamine (TMEDA), N,N,N',N'-tetramethylcyclohexanediamine (TMCDA), and hexamethylphosphoramide (HMPA). The aryllithiums are shown with (6)Li, (13)C, and (15)N NMR spectroscopies to be monomers, ArLi-LDA mixed dimers, and ArLi-LDA mixed trimers, depending on the choice of solvent. Subsequent Snieckus-Fries rearrangements afford ArOLi-LDA mixed dimers and trimers of the resulting phenolates. Rate studies of the rearrangement implicate mechanisms based on monomers, mixed dimers, and mixed trimers.     

DNA base trimers: empirical and quantum chemical ab initio calculations versus experiment in vacuo

A complete scan of the potential‐energy surfaces for selected DNA base trimers has been performed by a molecular dynamics/quenching technique using the force field of Cornell et al. implemented in the AMBER7 program. The resulting most stable/populated structures were then reoptimized at a correlated ab initio level by employing resolution of the identity, Møller–Plesset second‐order perturbation theory (RI‐MP2). A systematic study of these trimers at such a complete level of electronic structure theory is presented for the first time. We show that prior experimental and theoretical interpretations were incorrect in assuming that the most stable structures of the methylated trimers corresponded to planar systems characterized by cyclic intermolecular hydrogen bonding. We found that stacked structures of two bases with the third base in a T‐shape arrangement are the global minima in all of the methylated systems: they are more stable than the cyclic planar structures by about 10 kcal mol^?1. The different behaviors of nonmethylated and methylated trimers is also discussed. The high‐level geometries and interaction energies computed for the trimers serve also as a reference for the testing of recently developed density functional theory (DFT) functionals with respect to their ability to correctly describe the balance between the electrostatic and dispersion contributions that bind these trimers together. The recently reported M052X functional with a polarized triple‐zeta basis set predicts 11 uracil trimer interaction energies with a root‐mean‐square error of 2.3 kcal mol^?1 relative to highly correlated ab initio theoretical calculations.     

X-ray scattering and density-functional theory calculations to study the presence of hydrogen-bonded clusters in liquid N-methylacetamide

A structural investigation of liquid N-methylacetamide (NMA) is performed by x-ray scattering and density functional theory (DFT). Experimental data are analyzed to yield the total structure function SM(Q) and the pair correlation function g(r). The DFT calculations, using the standard triple zeta valence basis set augmented by a diffuse function for carbon, nitrogen and oxygen atoms, are performed on the one hand to study the structure and stability of the two possible conformers cis and trans. On the other hand, they are meant to examine some possible clusters which may describe the intermolecular arrangement in liquid NMA. Among two series of dimers and trimers associations, the spectra are particularly interpreted in terms of: Trans NMA dimers and trimers which resemble the short-range crystal structure, mixed cis and trans trimers and cis cyclic trimers. The H-bonding parameters and the intermolecular energy for each model are described.     

Synthesis of macrocyclic heteroarylenes by consecutive inter- and intramolecular cycloadditions of thiophenylene-tethered triynes

Consecutive inter- and intramolecular [2+2+2] cycloadditions of various thiophenylene-tethered triynes were comprehensively studied by using chiral Rh catalysts. When we started from 2,3- and 3,4-thiophenylene-tethered substrates, dimerization proceeded and chiral tetraheteroarylenes were obtained. In contrast, reactions of 2,5-thiophenylene-tethered substrates gave hexaheteroarylenes as trimers. When bis- and tris(2,5-thiophenylene)-tethered triynes were used, mixtures of dimers and trimers were obtained, which included macrocyclic systems that contained up to 12 aromatic rings, and their photophysical properties were measured.