PET和PBT在半熔态等温结晶形成单晶的研究

聚对苯二甲酸乙二醇酯(PET)和聚对苯二甲酸丁二醇酯(PBT)都是重要的工程塑料,有关PET和PBT的形态结构已研究了很多。一般认为,PET和PBT在玻璃化温度以上,熔点以下的温度范围内都可以结晶,且大部分都形成球晶结构。然而,PET和PBT     

PET伸直链结晶体的研究进展

对聚对苯二甲酸乙二醇酯（PET）在特定的结晶条件下是否生成伸直链晶体进行了论证，系统总结了伸直链晶体形成的证据，并讨论了PET伸直链晶体形成的机理。     

PET/PC共混体系结晶行为研究进展

聚对苯二甲酸乙二醇酯(PET)／聚碳酸酯(PC)合金材料是综合性能优异的工程塑料,对其结晶行为的研究,可为设计,调节及控制材料的性能提供理论基础。评述了近年来PET／PC共混体系结晶行为研究的最新工作和理论进展,包括PET／PC共混体系酯交换、相容性及结晶性的关系,退火对PET／PC共混体系结晶行为的影响,第三组分对PET／PC共混体系结晶行为的影响,PET／PC共混体系结晶动力学以及PET／PC共混体系高压结晶行为的研究。并对今后的深入研究作了展望。     

PTT/PET共混体系晶体形态与结晶性能的研究

用差示扫描量热仪(DSC)、广角X射线衍射(WAXD)和正交偏光显微镜研究了聚对苯二甲酸丙二酯(PTT)和聚对苯二甲酸乙二酯(PET)共混体系的晶体形态与结晶性能.结果表明,共混体系结晶性能与PTT的含量有关.PET的加入,使共混体系的球晶尺寸减小.球晶完善性降低.当PTT含量为40wt%～60wt%时,共混物分别出现了双重熔融峰和双重结晶峰.双重熔融峰是加热过程中熔融重结晶造成的,双重结晶峰说明不完善的晶体产生的次级结晶.     

1,2-丁二醇共聚对聚对苯二甲酸乙二醇酯结晶行为及力学性能的影响

为了探索生物基乙二醇中的1,2-丁二醇(1,2-BDO)作为共聚单体对生物基聚对苯二甲酸乙二醇酯(PET)的结晶行为和力学性能的影响。 本文合成了生物基PET均聚物和不同1,2-BDO共聚单元摩尔分数的系列生物基PET共聚物(共聚单体摩尔分数分别为2.0%、2.7%和5.6%),并采用傅里叶变换红外光谱仪(FTIR)、差示扫描量热仪(DSC)和力学测试等技术手段研究了其结晶行为和力学性能。 结果表明,随着1,2-BDO共聚单元摩尔分数的增加,PET共聚物的熔融温度、结晶速率及结晶度均明显降低,表明1,2-BDO共聚单体的引入破坏了PET分子链的规整性,阻碍了PET链段的结晶。 PET材料的拉伸强度随着1,2-BDO共聚单元摩尔分数的增加而降低,而弯曲强度和弯曲模量略有升高。     

不同催化剂上碳酸乙烯酯与对苯二甲酸二甲酯的酯交换反应

 将碳酸乙烯酯与甲醇酯交换合成碳酸二甲酯的反应和乙二醇与对苯二甲酸二甲酯酯交换合成聚对苯二甲酸乙二醇酯(PET)的反应偶合,建立了同时合成碳酸二甲酯和PET的新方法. 探索了有机锡、钛酸酯、乙酸盐和金属氧化物等不同催化剂对合成碳酸二甲酯和PET的影响. 二丁基氧化锡的催化效果最佳,其碳酸二甲酯的收率达68.4%.     

纤维素芳族酯热致液晶对PET结晶成核作用的研究

用自制的热致液晶性纤维素芳族酯(CAE)作聚对苯二甲酸乙二醇酯(PET)的成核剂,研究了PET/CAE体系(CAE含量≤1%)在110～200℃温度范围内的等温结晶动力学特性.结果表明,CAE能显著加快PET结晶速率(Z),Z随结晶温度和CAE含量变化均有极大值Z_max(T_C)和Z_max(W_CAE),Z_max(T_C)对应的温度T_max随CAE含量增加而降低,CAE促进PET结晶的作用机理与普通成核剂不同.     

聚对苯二甲酸乙二醇酯/聚乙二醇醚插层嵌段共聚物的结晶性能

合成了不同用量、不同分子量的聚乙二醇醚(PEG)或聚丁二醇醚(PTMC)与聚对苯二甲酸乙二醇酯(PET)/蒙脱土(MMT)的嵌段共聚物。研究了MMT在共聚物中的分散状态及PEG或PTMG对PET/MMT插层聚合物结晶性能的影响。结果表明,MMT在共聚物中以纳米尺寸分散;加入PEG或PTMG增强了聚酯链段的柔顺性,使共聚物熔体降温过程的结晶温度提高,冷结晶温度降低,即插层嵌段共聚物的结晶速率提高;在合成的共聚物中,分子量为2000,用量为DMT的6%的PEG对插层共聚物结晶速率的促进作用最大     

聚对苯二甲酸乙二醇酯/层状双氢氧化物纳米复合材料

聚对苯二甲酸乙二醇酯(PET)/层状双氢氧化物(LDHs)纳米复合材料是一种性能优异并具有广泛应用前景的新型聚合物基纳米复合材料.与纯PET相比, 其力学性能、热稳定性、阻燃性能与耐紫外线功能等均有明显提高或改善.本文对近年来PET/LDH纳米复合材料的研究进展进行了综述.首先, 对LDHs 的化学组成和结构特点进行了简要介绍, 并且对其制备方法和物理化学性质等进行了简单论述, 然后, 对PET/LDH纳米复合材料的制备、结构表征、结晶行为、机械力学性能以及耐热、阻燃和耐紫外线等功能性质的最新研究进展进行重点综述; 最后, 对其应用前景进行展望.     

对-乙酰氧基苯甲酸与聚对苯二甲酸乙二醇酯共缩聚反应及醚键形成的研究

监测了对-乙酰氧基苯甲酸与聚对苯二甲酸乙二醇酯(PET)共缩聚反应过程中1HNMR图谱及特性粘度的变化,对乙酰氧基酯交换反应及乙酰脂肪酯的反应活性进行了研究。并研究了以低分子量PET或对苯二甲酸二乙二醇酯为原料时反应中醚键的形成及其进入共聚酯链的规律性。     

In situ preparation of poly(ethylene terephthalate)-SiO2 nanocomposites

Poly(ethylene terephthalate) (PET)/silica nanocomposites were synthesized by using the in situ polymerization approach. Sol-gel transformation based on the hydrolysis and condensation of tetraethoxysilane (TEOS) is used to prepare the inorganic phase, concurrent with condensation polymerization of terephthalic acid and ethylene glycol to produce the PET matrix. Due to the simultaneous formation of the polymer matrix and the inorganic networks, a macrophase separation is avoided, and the resulting materials have a high degree of homogeneity. The morphology and the crystallization behavior of the composites were examined by scanning electron microcopy (SEM) and differential scanning calorimetry (DSC), respectively.     

典型高分子纤维发展回顾与未来展望

高分子纤维作为发展国民经济的基础材料、国防军工的战略材料、新兴产业的前沿材料,其产品内涵与应用领域正在不断拓展.本文首先简要介绍了国内外高分子纤维材料的发展简史,其依次经历了天然纤维、人造纤维、合成纤维(差别化、功能化、高性能等纤维)等发展阶段.其次,结合本课题组相关工作重点阐述了通用型聚酯纤维、高性能聚苯硫醚纤维以及生物质聚乳酸纤维等典型高分子纤维材料的研究进展,包括发展历程、制备方法、性能优化、应用领域等内容.最后,展望了高分子纤维材料的发展趋势,我们认为基于材料、信息、生物、机械等学科交叉融合与技术突破,具有多材料、多结构、多功能的绿色、超性能、智能纤维材料将成为未来发展方向.     

Thermal degradation chemistry of poly(ethylene naphthalate) – A study by thermal volatilisation analysis

Although the fundamental degradation chemistry of poly(ethylene naphthalate), PEN, is thought to be similar to that of poly(ethylene terephthalate), PET, there is very little evidence in the literature to support this. This paper presents data on the thermal degradation of PEN, in comparison to PET, with particular reference to evolved gas analysis undertaken by thermal volatilisation analysis (TVA). Our thermal degradation studies highlight strong similarities in the degradation behaviour of PET and PEN, despite some evidence of increased thermal stability of PEN in comparison to PET. Identical primary and secondary thermal degradation mechanisms are proposed for PET and PEN, with radical degradation processes thought to dominate at high temperature.     

Degradation mechanism of diethylene glycol units in a terephthalate polymer

Diethylene glycol (DEG) is incorporated into poly(ethylene terephthalate) (PET) during industrial synthesis in order to control crystallisation kinetics. DEG is known to be a weak point in the thermal degradation of PET, which is problematic during the recycling of the polymer.Studies on the thermal decomposition of the model polymer poly(diethylene glycol terephthalate) (PDEGT) have been performed using TG, DSC, TVA and spectroscopic techniques. They revealed a degradation behaviour with two distinct steps, where the first step initiates some 100 K below the degradation temperature of PET. The second step is similar to the behaviour of PET.Based on our observations, a new degradation mechanism specific to DEG units is proposed, where random ether groups along the backbone can back-bite and form cyclic oligomers. These cyclic species, containing ether moieties, are evolved at 245 °C and constitute the first of the two steps of degradation observed for PDEGT.     

Shape memory effects of poly(ethylene terephthalate-co-ethylene succinate) random copolymers

Random copolymers based on terephthalate acid, succinic acid and ethylene glycol, with thermally induced shape memory, were synthesized via melt polycondensation. The chemical structures of these poly(ethylene terephthalate-co-ethylene succinate) copolymers (PET-co-ES) were ascertained by ¹H NMR spectroscopy. The thermal and viscoelastic characteristics of these copolymers were studied in terms of the succinic acid content using differential scanning calorimetry and dynamic mechanical analysis. The shape memory effects of the copolymers were examined using the strain test. The experimental results suggested that all copolymers exhibited shape memory above the glass transition temperature and that the highest shape recovery rate was 90%. The shape recovery rates of all test samples declined with the number of cycles. This decrease in the shape recovery rate may result from the change in the degree of polymer orientation and/or crystallinity during repeated testing.     

Colour formation in poly(ethylene terephthalate) during melt processing

The discolouration, that occurs in virgin poly(ethylene terephthalate) - PET during melt processing, was studied using various bulk and surface analytical techniques. Proton nuclear magnetic resonance (¹H NMR) was used to study the bulk chemical changes occurring in the polymer during thermo-oxidative degradation. Chemical derivatisation with trifluoroacetic anhydride (TFAA) was used to label the hydroxyl groups introduced on the polymer surface by thermal oxidation.From the surface analysis studies using photoacoustic Fourier transform infrared spectroscopy (PA/FT-IR), diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) and X-ray photoelectron spectroscopy (XPS) it was evident that colour formation starts initially with the hydroxylation of the terephthalic ring. Further, the formation of additional carbonyl functionalities and conjugated chromophoric systems complete the colour formation process.     

Isothermal melt-crystallization and melting behavior for three linear aromatic polyesters

Isothermal crystallization and subsequent melting behavior for three different types of linear aromatic polyester, namely poly(ethylene terephthalate) (PET), poly(trimethylene terephthalate) (PTT), and poly(butylene terephthalate) (PBT), were investigated (with an emphasis on PTT in comparison with PET and PBT). These polyesters were different in the number of methylene groups (i.e. 2, 3, and 4 for PET, PTT, and PBT, respectively). Isothermal crystallization studies were carried out in a differential scanning calorimeter (DSC) over the crystallization temperature range of 182-208 °C. The wide-angle X-ray diffraction (WAXD) technique was used to obtain information about crystal modification and apparent degree of crystallinity. The kinetics of the crystallization process was assessed by a direct fitting of the experimental data to the Avrami, Tobin, and Malkin macrokinetic models. It was found that the crystallization rates of these polyesters were in the following order: PBT>PTT>PET, and the melting of these polyesters exhibited multiple-melting phenomenon. Lastly, the equilibrium melting temperature for these polyesters was estimated based on the linear and non-linear Hoffman-Weeks (LHW and NLHW) extrapolative methods.     

Optimisation of mould surface temperature and bottle residence time in mould for the carbonated soft drink PET containers

Polyethylene terephthalate (PET) bottles, which are usually produced by injection stretch blow moulding (ISBM) are widely used for carbonated soft drinks (CSD) storage and transportation. Stretch rod movement, blow pressure, preform temperature profile, mould surface temperature and material properties are among the most important factors affecting the final product's quality in terms of the thickness distribution, burst pressure and top-load resistance of the bottles. However, the residence time of the blown bottle inside the mould is also an important factor affecting its final properties. Especially in PET bottle production for hot fillings, the residence time is a very important factor because the longer the residence time the better the crystalline structure of the PET. In this production, the lid section is desired to have a fully crystalline form so that it can withstand hot fluids. In this study, the aim was to optimise the mould surface temperature and the blown bottle's residence time inside the mould for 1 L soft drink PET bottle production based on the final properties using the ECHIP 7 design of experiment (DOE) program. The method employed through this program was a quadratic one. Optimum process parameters were determined by the response surface method (RSM) and the process settings ensuring maximum top-load, burst pressure, Tg and degree of crystallinity were regarded to be optimum. It was found that the optimum mould surface temperature and blown bottle residence time inside the mould were 10 °C and 20 s, respectively.     

PET/PEN/DBS共混体系结构与形貌的研究

共混是改善聚合物性能的一种简单而又行之有效的方法,PET和PEN均为结晶性聚酯,由于PEN合成原料的影响,致使PEN的价格较高,但性能比PET优良,通过二者的共混,既可以提高PET的性能,又可以降低PEN成本,有关PET／PEN共混体系的研究已引起人们的关注,而对于共混体系结晶形态和结晶条件的研究较少,由于成核剂能够提高结晶速率,减小球晶尺寸,因此本文对PET／PEN／DBS共混体系中,组分组成的影响及不同结晶条件下共混物的结晶形貌进行研究。