Sensitive and Selective Determination of 2,4,6-Trichlorophenol Using a Molecularly Imprinted Polymer Based on Zinc Oxide Quantum Dots

Novel core-shell molecularly imprinted polymers were prepared based on zinc oxide quantum dots for the determination of 2,4,6-trichlorophenol by fluorescence. Principally, ZnO quantum dots and 2,4,6-trichlorophenol were chosen as the core substrate and the template molecule, respectively. The specific recognition sites for 2,4,6-trichlorophenol were obtained during the polymerization process in presence of 3-aminopropyltriethoxysilane and tetraethylorthosilicate. Molecularly imprinted ZnO quantum dots were characterized by transmission electron microscopy and Fourier transform infrared spectroscopy and the optical properties were evaluated by spectrofluorometry. Under the optimal conditions, molecularly imprinted ZnO quantum dots were successfully applied to the sensitive determination and selective recognition of 2,4,6-trichlorophenol in water. A linear relationship was obtained to cover the concentration range of 0–160?µmol?L^?1 with a correlation coefficient of 0.9931 calculated by the Stern–Volmer equation. The products were used for the determination of 2,4,6-trichlorophenol in the water from local rural areas and the results strongly supported that the molecularly imprinted ZnO quantum dots were suitable for the determination of 2,4,6-trichlorophenol in real examples.     

Fluorescent,magnetic dual-responsive molecularly imprinted polymers for the selective detection of moxidectin in animal samples

A simple and effective approach is presented to fabricate fluorescent and magnetic dual-responsive molecularly imprinted polymers for selective recognition of moxidectin. Magnetic gelatin was prepared to provide not only easy magnetic separation, but also significant amino functionalities, allowing surface modification with fluorescein isothiocyanate isomer I and acrylic acid (AA). Based on the double bond provided by AA, molecularly imprinted polymers could be directly coated onto the surface of modified magnetic gelatin. The dual-responsive imprinting polymers feature a high adsorption capacity (87.1 mg g^?1), selective fluorescence response toward moxidectin (imprinting factor = 3.6), rapid magnetic separation, and good reproducibility. Subsequently, the dual-responsive composites were successfully applied as sorbents for selective determination of moxidectin. Upon optimization, a linear range of 10–1000 ng mL^?1 and a detection limit of 6 ng mL^?1 were achieved. The results agree well with those obtained by the classic HPLC–FLD method (r = 0.9935). This developed strategy may find its potential application in rapid, simple, sensitive, and selective determinations of target molecules in complex samples.     

Grafting of Molecularly Imprinted Polymers on to Carboxyl-Modified Multiwalled Carbon Nanotubes for the Extraction of Rhodamine B from Dried Chili Powder

Molecularly imprinted polymers grafted on to the surface of carboxyl-modified multiwalled carbon nanotubes were developed using methacrylic acid as a functional monomer and trihydroxymethylpropyl trimethylacrylate as a crosslinker for application to rhodamine B determination. The synthesis, characteristics, and evaluation of the molecularly imprinted polymer are described. The apparent morphology of the polymers was characterized by scanning electron microscopy. To evaluate the binding ability of the molecularly imprinted polymers, equilibrium binding experiments were conducted and revealed the maximal binding capacity to be 561.54 µg g^?1. The introduction of nanomaterials into the polymer composite made important contributions to the affinity enhancement and recognition properties of the molecularly imprinted polymers. Moreover, the polymers were preliminarily applied as an adsorbent for separation and extraction of Rhodamine B from dried chili powder samples, based on solid phase extraction technology. The calibration curve was linear in the range of 0–7 µg mL^?1. For all tested samples, recoveries were reliable and in the range of 101.75–109.73%. The relative standard deviation ranged from 6.43–14.32%, which demonstrated that the polymer has potential for preconcentration of Rhodamine B from chili powder samples.     

Preparation and Evaluation of Uniform-Sized Sol–Gel Theophylline Imprinted Microspheres as Solid Phase Extraction Sorbent

A highly selective imprinted amino-functionalized silica gel microsphere was prepared by a simple molecular imprinting technique with a sol–gel process. Theophylline was used as template; 3-aminopropyltrimethoxysilane (APTMS) as functional monomer and tetraethylorthosilicate (TEOS) as reticulating agent. These theophylline imprinted silica microspheres were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron micrographs (SEM), thermogravimetric analysis (TGA), and high performance liquid chromatography (HPLC) in detail. The results showed that monodispersive APTMS-silica imprinted microspheres with size of 250 nm were synthesized successfully. Two kind of binding sites exist between the sol–gel imprinted microspheres and theophylline with K _D and Q _max for the higher affinity binding parameters was 1.89 μg/mL and 7.47 μg/mg dry polymers, and for the lower affinity binding sites were found to be 0.18 μg/mL and 3.47 μg/mg dry polymers, respectively. Packed in column, the imprinted microspheres were employed to extract theophylline from green tea successfully.     

Selective Electrochemical Determination of Salicylic Acid in Wheat Using Molecular Imprinted Polymers

Salicylic acid is a phytohormone, playing crucial roles in signal transduction, crop growth, and development, and defense to environmental challenges. In this study, a highly selective electrochemical sensor was designed and used to determine salicylic acid using molecularly imprinted polymers for recognition. The electrochemical sensor was fabricated via stepwise modification of gold nanoparticle–graphene–chitosan and molecularly imprinted polymers on a glassy carbon electrode. With electrochemical deposition, a gold nanoparticle–graphene–chitosan film was deposited on the glassy carbon electrode and enhanced the sensitivity. Molecularly imprinted polymers with adsorbed template salicylic acid were added to the surface of the modified electrode. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the modified electrodes. Salicylic acid in wheat was quantified by the sensor using the molecularly imprinted polymer/gold nanoparticle–graphene–chitosan/glassy carbon electrode. Concentrations of salicylic acid from 5?×?10^?10 to 5?×?10^?5?mol?L^?1 were determined showing that the developed sensor was suitable for the analysis of food.     

Preparation of a multi‐hollow magnetic molecularly imprinted polymer for the selective enrichment of indolebutyric acid

A simple strategy was developed for the preparation of multi‐hollow magnetic molecularly imprinted polymers by incorporating 3‐indolebutyric acid and ferroferric oxide nanoparticles simultaneously into a poly(styrene‐co‐methacrylic acid) copolymer matrix. The as prepared absorbents were characterized using scanning electron microscopy, Fourier‐transform infrared spectroscopy and mercury porosimetry. The adsorption isotherms of indolebutyric acid revealed that there are two types of affinity binding sites in the absorbents. The apparent maximum binding capacity and dissociation constant were 17.88 mg/g and 158.7 μg/mL for high‐affinity binding sites and 9.310 mg/g and 35.04 μg/mL for low‐affinity binding sites, respectively. The results testified that multi‐hollow magnetic molecularly imprinted polymers possessed excellent recognition capacity and fast kinetic binding behavior to the objective molecules due to the high specific surface area as large as 511.3 m²/g. Recoveries of 75.5–86.8% were obtained for the indolebutyric acid spiked at three concentration levels in blank and pear samples.     

Preparation and performance valuation of high selective molecularly imprinted polymers for malachite green

Molecular imprinting is a technology that facilitates the production of artificial receptors toward compounds of interest. In this study, we prepared a series of molecularly imprinted polymers (MIPs) by precipitation polymerization for the purpose of binding specifically to malachite green (MG). The presence of monomer–template solution complexes in non-covalent MIPs systems had been verified by UV-spectrometric detection and molecular dynamics simulations. The synthesized parameters were, respectively, optimized and the optimal conditions for the efficient adsorption property were as follows: template: MG, 1 mmol; functional monomer: methacrylic acid (MAA), 8 mmol; cross-linker: ethylene glycol dimethacryllate, 16 mmol; and porogen: acetonitrile, 30 mL. Fourier transform infrared spectroscopy and nitrogen adsorption experiments were used to characterize the MIPs. Scatchard analysis was used for estimation of the dissociation constants and maximum amounts of binding sites. The polymer based on MAA had two classes of heterogeneous binding sites characterized by two values of K _D and B _max: K _D = 14.10 μmol L^?1 and B _max = 1.37 μmol g^?1 for the higher affinity binding sites, and K _D = 384.62 μmol L^?1 and B _max = 24.77 μmol g^?1 for the lower affinity binding sites. The specificity of MIPs on SPE column was evaluated by rebinding the other structurally similar compounds. The results indicated that the imprinted polymers exhibited an excellent stereo-selectivity toward MG.     

Synthesis and Characterization of Molecularly Imprinted Nanoparticle Polymers for Selective Separation of Anthracene

Two anthracene molecularly imprinted nanoparticle polymers namely; An–MINP1 and An–MINP2, were synthesized using the precipitation polymerization method. An–MINPs were used for selective separation of anthracene from aqueous solutions. The data revealed that the maximum binding capacity of An–MINPs for anthracene were 320.8 and 374.3 mg g^?1 for An–MINP1 and An–MIPN2, respectively, compared with 2.8 and 4 µg g^?1 obtained by using their corresponding non-imprinted polymers NIP1 and NIP2, respectively. Under optimized conditions, An–MINPs give high selectivity and sensitivity of anthracene separation. The anthracene uptake percentage from aqueous solutions ranged from 90.3 to 99.9%.     

Selective analysis of aristolochic acid I in herbal medicines by dummy molecularly imprinted solid‐phase extraction and HPLC

In this study, surface molecularly imprinted polymers were prepared as the selective sorbents for separation of aristolochic acid I in herbal medicine extracts by a facile approach. A less toxic dummy template, ofloxacin, was used to create specific molecule recognition sites for aristolochic acid I in the synthesized polymers. The polymers were characterized by Fourier‐transfer infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, elemental analysis, and nitrogen adsorption–desorption test. The adsorption capacity was calculated using adsorption kinetics, selectivity, and recycling experiments. The obtained polymers exhibited high thermostability, fast equilibrium time, and excellent binding ability. Subsequently, the polymers applied as the solid‐phase extraction absorbent was proposed and used for the enrichment and analysis of aristolochic acid I in herbal plants. The result showed that the aristolochic acid I was enriched up to 16 times after analysis by using high‐performance liquid chromatography. The good linearity for aristolochic acid I was obtained in the range of 0.1–200 μg/mL (R ² = 0.9987). The recovery and precision values were obtained (64.94–77.73%, RSDs% ≤ 0.8%, n  = 3) at three spiked concentration levels. This work provided a promising method for selective enrichment, extraction, and purification of aristolochic acid I from complex herbal plants.     

Design of EGDMA‐Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity

An attempt has been made to design theophylline selective polymers with maximum selectivity and specificity, and to relate the rebinding capacity of the polymers with the degree of crosslinking, as well as with the template‐monomer ratio. The theophylline imprinted and non‐imprinted polymers based on methacrylic acid as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent (35–80 mol%) were prepared. The developed imprinted polymers were characterized by FT‐IR, ¹H and ¹³C‐NMR spectra. Equilibrium binding of theophylline by the imprinted and non‐imprinted polymers were investigated and optimized the conditions. Imprinted polymers showed specific binding of the template theophylline. Selectivity of the imprinted polymers was investigated towards caffeine and nicotine. Imprinted polymers showed specific and selective binding of theophylline, which varied with the degree of EGDMA crosslinking. Equilibrium rebinding experiments proved that imprinted polymer with moderate (70%) crosslinking with 1∶2 template‐functional monomer ratio is ideal with maximum specificity and selectivity.     

Preparation of a semicovalent, molecularly surface imprinted polymer for the rapid determination of trace acid orange II in food and environmental samples

In this work, molecularly imprinted polymer (MIP) particles were synthesized using a semicovalent method based on a specific thermally reversible bond, and these particles were used for the rapid detection of the azo dye acid orange II. The imprinted polymers—which were prepared via the covalent reaction of 3-(triethoxysilyl)propyl isocyanate with the template molecules—were attached to the surface of silica-coated magnetic nanoparticles, and a simple thermal reaction was then performed to remove the templates, leaving spaces with specific noncovalent bonds for target re-recognition. The conditions for the synthesis of the MIP were optimized during the polymerization experiments to improve the adsorption capacity and selectivity. The resulting polymers were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy to confirm their structure. The MIPs were subjected to an online solid-phase extraction and a magnetic molecularly imprinted solid-phase extraction procedure. For both methods, all samples were prepared with spiking levels of 5.0, 10.0, and 15.0 μg kg^-1 using high-performance liquid chromatography with UV/vis detection; after the preconcentration of 50-mL sample solutions, the enhancement factors reached 710 and 629. The limits of detection (signal-to-noise ratio of 3) were 9.83 and 17.41 ng L^-1, with relative standard deviations (n?=?9) of 6.72 % and 8.25 %, respectively, for a 4.0 μg L^?1 standard template solution. These two methods were developed to quantify trace acid orange II contents in food and environmental samples; the recoveries ranged from 72 to 105 % and from 70 to 94 %, respectively.     

金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

Preparation and Adsorption Characteristics of Cordycepin Molecularly Imprinted Polymers

The separation of a molecularly imprinted polymer for cordycepin was investigated. The synthesis employed cordycepin as the molecular template, alpha-methylacrylic acid as the functional monomer, glycol dimethyl acrylate as the cross-linking agent, azobisisobutyronitrile as the initiator, and tetrahydrofuran as the solvent and pore-foaming agent. The interaction between cordycepin and the functional monomer was investigated by ultraviolet-visible and infrared spectroscopy. The properties of the molecularly imprinted polymer were analyzed by scanning electron microscopy, equilibrium adsorption experiments, and the Scatchard equation. Static adsorption, solid phase extraction, and high-performance liquid chromatography experiments were employed to evaluate the adsorption properties and selective recognition characteristics. The results showed that the molecularly imprinted polymer had specific adsorption with cordycepin, and the maximum absorption capacity was 1920 µg/g. Scatchard analysis suggested that high affinity and low affinity binding sites were present. For the high affinity case, the dissociation constant and apparent maximum numbers of the binding sites were 0.0089 mmol/L and 4.78 µmol/g, respectively. The dissociation constant and apparent numbers of binding sites were 0.035 mmol/L and 6.047 µmol/g for the low affinity sites. Compared with the corresponding nonimprinted polymer, the cordycepin molecularly imprinted polymer exhibited higher adsorption and selectivity for cordycepin than structural analogs.     

Comparison of multi-recognition molecularly imprinted polymers for recognition of melamine,cyromazine, triamterene,and trimethoprim

Three fragmental templates, including 2,4-diamino-6-methyl-1,3,5-triazine (DMT), cyromazine (CYR), and trimethoprim (TME), were used to prepare the fragment molecularly imprinted polymers (FMIPs), respectively, in polar ternary porogen which was composed of ionic liquid ([BMIM]BF₄), methanol, and water. The morphology, specific surface areas, and selectivity of the obtained FMIPs for fragmental analogues were systematically characterized. The experimental results showed that the FMIPs possessed the best specific recognition ability to the relative template and the greatest imprinting factor (IF) was 5.25, 6.69, and 7.11 of DMT on DMT-MIPs, CYR on CYR-MIPs, and TME on TME-MIPs, respectively. In addition, DMT-MIPs also showed excellent recognition capability for fragmental analogues including CYR, melamine (MEL), triamterene (TAT), and TME, and the IFs were 2.08, 3.89, 2.18, and 2.60, respectively. The effects of pH and temperature on the retention of the fragmental and structural analogues were studied in detail. Van’t Hoff analysis indicated that the retention and selectivity on FMIPs were an entropy-driven process, i.e., steric interaction. The resulting DMT-MIPs were used as a solid-phase extraction material to enrich CYR, MEL, TAT, and TME in different bio-matrix samples for high-performance liquid chromatography analysis. The developed method had acceptable recoveries (86.8–98.6 %, n?=?3) and precision (2.7–4.6 %) at three spiked levels (0.05–0.5 μg g^?1).     

Synthesis of molecularly imprinted polymers using acrylamide‐β‐cyclodextrin as a cofunctional monomer for the specific capture of tea saponins from the defatted cake extract of Camellia oleifera

Molecularly imprinted polymers were synthesized using mixed tea saponins as a template and acrylamide‐β‐cyclodextrin as a cofunctional monomer for the specific binding and purification of tea saponins from the defatted cake extract of Camellia oleifera. The adsorption properties of the prepared polymers were systematically evaluated including adsorption kinetics, adsorption isotherms, and selective recognition characteristics. It showed that the adsorption kinetics followed the pseudo first‐order kinetic model (R² = 0.995) with an equilibrium time of 3 h, adsorption isotherm data fitted well with the Langmuir–Freundlich model (R² = 0.984) with an adsorption capacity of 14.23 mg/g. The relative selectivity coefficient (k´) in the presence of the analogues glycyrrhizic acid and glycyrrhetinic acid were 1.16 and 17.21, respectively. The performance of the molecularly imprinted polymers as solid‐phase extraction materials was investigated and the results indicated that using acrylamide‐β‐cyclodextrin as a cofunctional monomer improved both the adsorption capacity and active sites stability of the imprinted polymers. The solid‐phase extraction using the polymers as packing materials was subsequently applied for the separation of tea saponins in raw C. oleifera press extract, and targets were obtained with a purity reaching 89%.     

Molecularly imprinted polymers as artificial steroid receptors

The polymers selective to six different steroids (testosterone, Δ⁴-androstene-3,17-dione, 1,4-androstadiene-3,17-dione, β-estradiol, progesterone, testosterone propionate) have been synthesized using molecular imprinting based on noncovalent interactions. Analysis of the influence of structural features of the steroids under study has shown that molecules with a relatively rigid structure and the OH group at C-17 position are the most efficient templates for methacrylic acid-containing imprinted polymers. The chromatographic study of the polymers synthesized has demonstrated a strong dependence of the selectivity and intensity of interaction with analytes on the composition of solvents used both as porogen and chromatographic mobile phase. To obtain polymers with highly selective recognition sites and to create the optimal conditions for molecular recognition, all possible interactions (between template and functional monomer, template and solvent, solvent and functional monomer) should be taken into account. <?TF="palat-i"> The batch rebinding study of testosterone by the imprinted polymer in acetonitrile has revealed some heterogeneity of recognition sites, and permitted determination of K_ass = 1.05 × 10⁴ M ⁻¹, ΔG° = −5.4 kcal/mol and N = 1.2 μmol/g for high-affinity sites and K_ass = 0.33 × 10⁴ M ⁻¹, ΔG° = −4.8 kcal/mol and N = 2.2 μmol/g for low-affinity sites. <?TF="palat-i"> The results obtained show how it is possible to regulate in different modes the molecular recognition by imprinted polymers as well as to fabricate polymers possessing the necessary properties depending on their practical application.© 1998 John Wiley & Sons, Ltd.     

Simple and selective extraction of quercetin with microextraction in packed syringe method using modified glass powder by a molecularly imprinted polymer followed by spectrophotometric determination

A new sample preparation method based on microextraction in packed syringe was developed for preconcentration of quercetin prior to its spectrophotometric determination. Molecularly imprinted polymers as packing material was used for higher extraction efficiency. First, glass powder as support material because of low cost and available substrate was modified, and then molecularly imprinted polymers were synthesized by the sol–gel method using 3-aminopropyltriethoxysilane as a functional monomer and tetraethyl orthosilicate as cross-linker agent. The combination of a molecularly imprinted polymers and microextraction in packed syringe increased the selectivity and sensitivity. The surface morphology and functionality of the prepared molecularly imprinted polymers was characterized using Fourier-transform infrared spectroscopy, Field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and thermogravimetric analysis. Different influencing parameters on extraction efficiency such as effect of the number of sample sorption/desorption cycles, type and volume of desorption solvent, pH of the sample solution, and molecularly imprinted polymers amounts were optimized. Under the optimum condition, the proposed method displayed a linear range from 0.01 to 5 µg mL⁻¹ and limit of detection 3.68 ng mL⁻¹. Relative standard deviation for three replicate determination of 1 µg mL⁻¹ quercetin was 2.1 %. The proposed method was applied successfully for the selective extraction of quercetin from tea and coffee samples.     

Synthesis and binding properties of a noncovalent molecularly imprinted testosterone-specific polymer

In this study, molecular imprinting was used to develop a method based on noncovalent interactions for synthesis of a testosterone-specific polymer. The effect of the different template–monomer ratios, the particle sizes of polymers, and chromatographic mobile phases on steroid–polymer interactions are discussed. The polymer obtained was found to interact specifically with testosterone, while other steroids under study were eluted close to the void volume in the HPLC experiments. Batch rebinding studies in acetonitrile were undertaken to quantitatively evaluate the affinity of the polymer for testosterone. During this experiment, the testosterone concentration was measured in two ways: spectrophotometrically and by HPLC on a column with testosterone-specific imprinted polymer synthesized by us. Both methods resulted in similar values of association constants and the number of binding sites. However, the second method has obvious advantages when the analyzed solution contains a mixture of optically dense compounds. The results obtained focus on the two-point binding nature of the imprinted polymer–testosterone interaction and the significant role of hydrogen bonds between the OH group of testosterone and carboxy group of methacrylic acid residues inside specific recognition sites of the imprinted polymer. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1725–1732, 1998     

Determination of Acephate in Vegetables by Magnetic Molecularly Imprinted Polymer Isolation Coupled with High-Performance Liquid Chromatography

Magnetic molecularly imprinted polymers based on carbon nanotubes were prepared and characterized by infrared spectrometry, transmission electron microscopy, and vibrating sample magnetometry and were employed for the isolation of acephate from cabbage, spinach, lettuce, leeks, and celery. Kinetic and recognition studies were carried out in order to investigate the adsorption properties of the polymers. During the application process, the acephate extracted from vegetables was purified with the magnetic molecularly imprinted polymers and determined by high performance liquid chromatography with an ultraviolet detector. The recoveries of acephate at three fortified concentrations (0.015, 0.15, and 1.5 mg kg^?1) were between 89.2% and 93.4%. The limits of detection and quantification of acephate were 0.0025 and 0.0077 mg kg^?1, respectively. The linear dynamic range was from 0.01 to 5 mg kg^?1. The relative standard deviations of intra- and inter-day precision were 1.1% to 5.9% and 2.7% to 6.4%, respectively. The developed method was demonstrated to be rapid and selective for the extraction and determination of acephate in vegetables.     

Simultaneous preconcentration and determination of malachite green and fuchsine dyes in seafood and environmental water samples using nano-alumina-based molecular imprinted polymer solid-phase extraction

Molecular imprinted polymer for determination of malachite green (MG) and fuchsine basic (FU) dyes by spectrophotometry has been used, to develop a novel simultaneous extraction and preconcentration method. Molecularly imprinted layer-coated nano-alumina (MIP@Nano-Al₂O₃) as adsorbent was prepared by surface molecular imprinting technique, and characterised by FTIR spectroscopy, scanning electron microscopy, energy dispersive X-ray analysis (EDAX) and thermogravimetric analysis (TGA). The method is based on simultaneous extraction of MG and FU dyes from aqueous solution by using molecularly imprinted polymer and measuring the absorbance at 617 and 546 nm for MG and FU, respectively. Parameters which affect the extraction efficiency such as pH, volume of eluent and amount of adsorbent were investigated and optimised. Linear calibration curves were obtained in the range of 2–750 ng mL^?1 for MG and 1–240 ng mL^?1 for FU under optimum conditions. Detection limit based on three times the standard deviation of the blank (3S_b) was 0.655 and 0.245 ng mL^?1 (n = 10) for MG and FU, respectively. The relative standard deviation (RSD) for 100 ng mL^?1 of MG and FU was 2.35 and 3.06% (n = 7), respectively. The method was applied to the simultaneous determination of the dyes in different seafood and environmental water samples.