Ag-TiO_2/ACF纳米复合物的制备及其对亚甲基兰光降解作用及抗菌性能

以钛酸四丁酯为前躯体,活性炭纤维(ACF)为载体,蔗醣为粘结剂,采用真空吸附水解法制备了TiO2/ACF催化剂.通过在TiO2/ACF表面负载上银纳米颗粒,制得Ag-TiO2/ACF光降解-抗菌复合材料.利用BET、XRD、SEM等方法对其进行了表征.研究了Ag-TiO2/ACF在光照下对亚甲基兰的降解作用和对大肠杆菌的杀灭效果.结果表明,光照2h,Ag-TiO2/ACF可以将溶液中亚甲基兰降解97%以上.当纳米复合材料中Ag含量为0.75wt%时,Ag-TiO2/ACF对大肠杆菌具有很强的灭杀作用.     

吸附—光催化联用去除室内挥发性有机物*

多孔吸附剂吸附和纳米TiO₂光催化是目前室内挥发性有机物（VOCs）去除所采用的主要手段。但存在吸附剂容量有限、饱和失效、TiO₂光催化剂活性低、失活和负载困难等问题。多孔吸附剂与纳米TiO₂联用,通过TiO₂光催化作用可实现吸附剂的原位再生,增加吸附剂的吸附容量;通过多孔吸附剂的吸附作用可为TiO₂光催化提供高浓度污染环境,提高催化剂活性,抑制催化剂失活,消除水蒸气分子对TiO₂表面活性吸附位的竞争吸附,解决催化剂分离难题;从而实现对室内VOCs污染的高效深度净化。本文对近年来多孔吸附剂与纳米TiO₂光催化联用去除室内VOCs进行了综合评述。介绍了吸附—光催化联用去除室内VOCs的多孔吸附剂类型,吸附/光催化复合材料的制备方法及常用反应器,分析了吸附—光催化联用去除室内VOCs过程中水蒸气、催化剂失活对光催化的影响等问题。     

Gd掺杂TiO2/活性炭纤维复合材料的制备及表征

以TiCl4和Gd(NO3)3·6H2O为主要原料,采用酸催化水解法制备Gd掺杂TiO2光催化剂并通过浸涂法将其负载在活性炭纤维(ACF)表面,制得Gd掺杂TiO2/ACF复合材料。 以气相苯为模型物,考察材料的光催化活性。 利用XRD、FTIR及GC-MS对催化剂的晶相结构、光谱特征等进行了表征。 结果表明,Gd掺杂能有效抑制TiO2的晶粒生长。 Gd掺杂量、浸涂次数影响TiO2/ACF光催化活性,Gd2O3掺杂质量分数为0.48%、浸涂2次的TiO2/ACF活性最高。 在苯光催化氧化后的Gd掺杂TiO2/ACF复合材料表面未发现醌类中间产物的存在。 Gd的掺入能减缓催化剂失活,光催化反应100 min后仍能表现出较高活性。     

Gd掺杂TiO2/活性炭纤维复合材料的制备及表征

以TiCl4和Gd(NO3)3·6H2O为主要原料,采用酸催化水解法制备Gd掺杂TiO2光催化剂并通过浸涂法将其负载在活性炭纤维(ACF)表面,制得Gd掺杂TiO2/ACF复合材料。 以气相苯为模型物,考察材料的光催化活性。 利用XRD、FTIR及GC-MS对催化剂的晶相结构、光谱特征等进行了表征。 结果表明,Gd掺杂能有效抑制TiO2的晶粒生长。 Gd掺杂量、浸涂次数影响TiO2/ACF光催化活性,Gd2O3掺杂质量分数为0.48%、浸涂2次的TiO2/ACF活性最高。 在苯光催化氧化后的Gd掺杂TiO2/ACF复合材料表面未发现醌类中间产物的存在。 Gd的掺入能减缓催化剂失活,光催化反应100 min后仍能表现出较高活性。     

负载TiO_2的ACF吸附降解苯的研究

主要研究了负载有TiO2的活性炭纤维(ACF)对苯的吸附降解作用.实验表明:在低浓度实验中,介质质量基本相同的情况下,负载有TiO2的ACF对苯的吸附降解量比无负载的ACF提高11.5%;在高浓度实验中,在苯质量相同以及介质质量基本相同的情况下,负载有TiO2的ACF吸附降解时间比无负载的ACF的时间降低了23%~38%,这说明TiO2在实验中起到了降解苯的作用.     

有序多孔过渡金属氧化物及其负载贵金属催化剂对挥发性有机物氧化的催化性能（英文）

大部分的挥发性有机物(VOCs)污染环境,危害人身健康.目前,我国虽然已开展了治理VOCs污染的工作,但还缺乏有效的、拥有自主知识产权的VOCs治理技术,因此研发新型高效VOCs处理技术迫在眉睫.催化氧化法是公认的最有效消除VOCs的途径之一,而高性能催化剂的研发是实现该过程的关键.近年来,人们围绕消除VOCs的高效且价廉的催化剂的研发开展了卓有成效的工作,许多过渡金属氧化物、混合或复合金属氧化物及其负载贵金属催化剂均被认为是有效的催化氧化材料.与体相材料相比,多孔材料具有发达的孔道结构和高的比表面积,一方面有利于反应物的扩散、吸附和脱附,因而具有更高的催化活性和选择性;另一方面有利于活性组分(如贵金属等)在多孔材料表面的高分散,抑制活性组分的烧结,因而具有更好的催化稳定性.本文简述了近年来多孔金属氧化物在环境污染物消除领域的研究进展,阐述了以有序介孔或大孔过渡金属氧化物、钙钛矿型氧化物和负载贵金属催化剂的制备及其对典型VOCs(如苯系物、醇类、醛类及酮类等)氧化的催化性能,重点介绍了四类催化材料,包括有序介孔过渡金属氧化物或复合氧化物(Co_3O_4,MnO_2,Fe_2O_3,Cr_2O_3和LaFeO_3等)催化剂,有序介孔金属氧化物负载贵金属(Au/Co_3O_4,Au/MnO_2和Pd/Co_3O_4等)催化剂,三维有序大孔过渡金属氧化物或复合氧化物(Fe_2O_3,LaMnO_3,La_(0.6)Sr_(0.4)MnO_3和La_2CuO_4等)催化剂,以及三维有序大孔金属氧化物负载贵金属(Au/Co_3O_4,Au/LaCoO_3,Au/La_(0.6)Sr_(0.4)MnO_3和AuPd/Co_3O_4等)催化剂的制备及其物化性质与对苯、甲苯、二甲苯、乙醇、丙酮、甲醛、甲烷或氯甲烷等VOCs氧化的催化性能之间的相关性.借助二氧化硅或聚甲基丙烯酸甲酯微球等硬模板,采用纳米浇铸法可制备出二维或三维的有序单一或多级孔道结构的金属氧化物.研究表明,多孔金属氧化物的催化性能远优于其体相甚至纳米催化剂的.有序多孔材料的优异催化性能与其拥有大的比表面积、高的吸附氧物种浓度、优良的低温还原性、独特的孔道结构、活性组分的高分散以及贵金属与氧化物载体之间的强相互作用等有关.探明影响催化剂活性的因素有利于从原子水平上认识催化过程,为新型高效催化剂的设计与制备奠定基础.本文还指出了此类研究中存在的一些问题,例如利用硬模板法制备多孔材料的缺点是目标催化剂的收率低,硬模板浪费严重,大规模制备多孔催化剂势必增加制备成本,这些问题有待于妥善解决.与此同时,还展望了VOCs消除技术的未来发展趋势,采用多种技术联用的方法有望最大程度地提高VOCs的消除效率.     

有序多孔过渡金属氧化物及其负载贵金属催化剂对挥发性有机物氧化的催化性能

大部分的挥发性有机物(VOCs)污染环境,危害人身健康.目前,我国虽然已开展了治理 VOCs污染的工作,但还缺乏有效的、拥有自主知识产权的 VOCs治理技术,因此研发新型高效 VOCs处理技术迫在眉睫.催化氧化法是公认的最有效消除 VOCs的途径之一,而高性能催化剂的研发是实现该过程的关键.近年来,人们围绕消除 VOCs的高效且价廉的催化剂的研发开展了卓有成效的工作,许多过渡金属氧化物、混合或复合金属氧化物及其负载贵金属催化剂均被认为是有效的催化氧化材料.与体相材料相比,多孔材料具有发达的孔道结构和高的比表面积,一方面有利于反应物的扩散、吸附和脱附,因而具有更高的催化活性和选择性;另一方面有利于活性组分(如贵金属等)在多孔材料表面的高分散,抑制活性组分的烧结,因而具有更好的催化稳定性.本文简述了近年来多孔金属氧化物在环境污染物消除领域的研究进展,阐述了以有序介孔或大孔过渡金属氧化物、钙钛矿型氧化物和负载贵金属催化剂的制备及其对典型 VOCs(如苯系物、醇类、醛类及酮类等)氧化的催化性能,重点介绍了四类催化材料,包括有序介孔过渡金属氧化物或复合氧化物(Co3O4, MnO2, Fe2O3, Cr2O3和 LaFeO3等)催化剂,有序介孔金属氧化物负载贵金属(Au/Co3O4, Au/MnO2和 Pd/Co3O4等)催化剂,三维有序大孔过渡金属氧化物或复合氧化物(Fe2O3, LaMnO3, La0.6Sr0.4MnO3和 La2CuO4等)催化剂,以及三维有序大孔金属氧化物负载贵金属(Au/Co3O4, Au/LaCoO3, Au/La0.6Sr0.4MnO3和 AuPd/Co3O4等)催化剂的制备及其物化性质与对苯、甲苯、二甲苯、乙醇、丙酮、甲醛、甲烷或氯甲烷等 VOCs氧化的催化性能之间的相关性.借助二氧化硅或聚甲基丙烯酸甲酯微球等硬模板,采用纳米浇铸法可制备出二维或三维的有序单一或多级孔道结构的金属氧化物.研究表明,多孔金属氧化物的催化性能远优于其体相甚至纳米催化剂的.有序多孔材料的优异催化性能与其拥有大的比表面积、高的吸附氧物种浓度、优良的低温还原性、独特的孔道结构、活性组分的高分散以及贵金属与氧化物载体之间的强相互作用等有关.探明影响催化剂活性的因素有利于从原子水平上认识催化过程,为新型高效催化剂的设计与制备奠定基础.本文还指出了此类研究中存在的一些问题,例如利用硬模板法制备多孔材料的缺点是目标催化剂的收率低,硬模板浪费严重,大规模制备多孔催化剂势必增加制备成本,这些问题有待于妥善解决.与此同时,还展望了 VOCs消除技术的未来发展趋势,采用多种技术联用的方法有望最大程度地提高 VOCs的消除效率.     

V2O5/ACF催化剂低温下选择性催化还原NO的机理

将V2O5担载在活性炭纤维(ACF)上制得V2O5/ACF催化剂,并采用暂态响应实验和NH3吸附氧化实验等考察了影响V2O5/ACF催化剂上选择性催化还原(SCR)反应的关键因素.结果表明,NH3在催化剂表面的吸附是必要的,而且该吸附是一个快速过程;气相O2的存在有利于形成催化剂中所需的活性氧化态物种.NH3吸附.脱附与原位质谱相结合的实验表明,V2O5/ACF催化剂具有吸附NH3和将NH3氧化为N2H2的能力,N2H2为NH3氧化的一种中间体.     

低温NH_3-SCR催化剂MnO_x-CeO_x/ACF的SO_2中毒机理(英文)

在二氧化硫(SO2)气氛下,对Fe、Cu和V改性的催化剂MnOx-CeOx/ACF(活性碳纤维)的氨选择性催化还原(NH3-SCR)一氧化氮的低温活性进行研究.实验结果表明:以Cu和V改性催化剂未提高MnOx-CeOx/ACF的低温抗SO2性能;Fe改性MnOx-CeOx/ACF在初始6h内提高了催化剂的抗SO2性能,但较长时间仍然失活.以N2吸附、X射线光电子能谱(XPS)、傅里叶变换红外(FT-IR)光谱以及热重分析(TGA)等手段对中毒催化剂进行分析.在SO2存在下,催化剂中毒归因于两个方面:一是覆盖于催化剂表面的铵盐类物质,二是SO2与催化剂中的金属氧化物反应生成的金属硫酸盐及亚硫酸盐.在中毒催化剂中硫元素主要以金属硫酸盐及亚硫酸盐的形式存在,其在中毒的MnOx-CeOx/ACF、Fe-MnOx-CeOx/ACF、Cu-MnOx-CeOx/ACF和V-MnOx-CeOx/ACF催化剂中所占比例分别为70.4%、68.9%、86.3%和71.4%(w).进一步揭示了MnOx-CeOx/ACF催化剂在低温SCR条件下的SO2中毒机理.     

以ACF为模板制备掺氮TiO2及其光催化脱氨氮研究

本文采用溶胶-凝胶法制备了以活性炭纤维(ACF)为模板的掺氮TiO2光催化剂,利用XRD、XPS、TEM、SEM和UV-Vis等方法对催化剂进行了表征,测定了催化剂在紫外、日光照射下光催化脱氨氮的活性.ACF作模板掺氮TiO2催化剂具有介孔结构,平均粒径约为10 nm,比表面积为64.43 m2/g.紫外、可见光光催化2 h氨氮(85 mg/L)废水的氨氮去除率分别为68%和47%.结果表明,催化剂中氮的含量是影响催化剂光催化活性的重要因素.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.