Electron spectroscopic investigations of CdS and CdTe electrochemically coated on glass

The electrodeposition of CdS and CdTe is investigated to improve the stoichiometric properties of CdS/CdTe layers on ITO-glass substrates for solar cell applications. X-ray photoelectron spectroscopy is utilized for the characterization of the CdS and CdTe layers. The influence of the electrodeposition potential, the pH and the thiosulfate concentration on the stoichiometry of CdS and CdTe layers are discussed.     

CdTe/CdS共敏化TiO2电极材料的制备与光电性能

将电沉积法和化学浴沉积法结合,分别将CdTe和CdS量子点纳米晶材料引入到TiO₂纳米管阵列上制备CdTe/CdS量子点共敏化TiO₂光电极。利用扫描电镜、X射线衍射和X射线能量色散光谱等测试手段对所得样品的形貌、晶型和组分进行表征。在模拟太阳光照射条件下,通过电化学工作站测试其光电化学性能。研究结果表明,相对于单一量子点敏化CdS/TiO₂和CdTe/TiO₂光电极而言,共敏化CdTe/CdS/TiO₂光电极表现出更好的光电转化性能,短路电流密度和光电转换效率分别可以达到3.1 mA·cm^-2和1.85%。此外,采用电化学阻抗测试技术对材料性能提升的原因进行深入的探究。     

CdTe/CdS共敏化TiO2电极材料的制备与光电性能

将电沉积法和化学浴沉积法结合,分别将CdTe和CdS量子点纳米晶材料引入到TiO_2纳米管阵列上制备CdTe/CdS量子点共敏化TiO_2光电极。利用扫描电镜、X射线衍射和X射线能量色散光谱等测试手段对所得样品的形貌、晶型和组分进行表征。在模拟太阳光照射条件下,通过电化学工作站测试其光电化学性能。研究结果表明,相对于单一量子点敏化CdS/TiO_2和CdTe/TiO_2光电极而言,共敏化CdTe/CdS/TiO_2光电极表现出更好的光电转化性能,短路电流密度和光电转换效率分别可以达到3.1 m A·cm~(-2)和1.85%。此外,采用电化学阻抗测试技术对材料性能提升的原因进行深入的探究。     

Distinct visible-light response of composite films with CdS electrodeposited on TiO2 nanorod and nanotube arrays

Thorough infiltration of CdS nanoparticles into spaces of titania nanorod and nanotube arrays was achieved by an ac electrodeposition technique to construct composite films of CdS over titania. The substrate affected not only the electrodeposition rate but also the oriented growth of CdS. A photocurrent much larger than the simple summation of those arising from the two component layers of CdS and titania was detected for both composite films under visible-light illumination. Such an enhancement in the photocurrent was even more prominent for the composite film based on the titania nanorod arrays, which was contributed to the higher charge separation rate arising from the nearly single-crystalline nanorods when compared with the polycrystalline nanotubes.     

Silica Coating of Water-Soluble CdTe/CdS Core-Shell Nanocrystals by Microemulsion Method

"Using Te powder as a tellurium source and Na2S as a sulfur source, core-shell CdTe/CdS NPs were synthesized at 50 oC. UV-visible and photoluminescence (PL) spectra were used to probe the effect of CdS passivation on the CdTe quantum dots. As the thickness of CdS shell increases, there is a red-shift in the optical absorption spectra, as well as the PL spectra. The broadening absorption peaks and PL spectra indicate that the size distributions of CdTe/CdS NPs widen increasingly with the increase of CdS coverage. The PL spectra also show that the fluorescence intensity of CdTe QDs will increase when the particles are covered with CdS shell with ratio of S/Te less than 1.0, otherwise it will decrease if the ratio of S/Te is larger than 1.0. Furthermore, the (CdTe/CdS)@SiO2 particles were prepared using a water-in-oil microemulsion method at room temperature in which hydrolysis of tetraethyl orthosilicate leads to the formation of monodispersed silica nanospheres. The obtained (CdTe/CdS)@SiO2 particles show bright photoluminescence with their fluorescence intensity being enhanced 18.5% compared with that of CdTe NPs. TEM imaging shows that the diameter of these composite particles is 50 nm. These nanoparticles are suitable for biomarker applications since they are much smaller than cellular dimensions."     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

Chemischer Transport fester Lösungen. 20 [1] Der Chemische Transport von Mischphasen in den Systemen CdS/CdTe und CdSe/CdTe

Chemical Vapor Transport of Solid Solutions. 20, Chemical Vapor Transport of Mixed Phases in the Systems CdS/CdTe and CdSe/CdTe By means of CVT methods using iodine as transport agent (900 → 800 °C) in the systems CdS/CdTe and CdSe/CdTe mixed crystals could be prepared. The system CdS/CdTe shows a broad miscibility gap. Sulfur rich mixed crystals as well as tellurium rich ones could be prepared. The system CdSe/CdTe shows complete miscibility for all Se/Te ratios. In both systems congruent transport has been observed.     

室温水相合成CdTe/CdS核/壳结构量子点

开发了一种以聚乙烯吡咯烷酮为分散剂和稳定剂经条件温和的室温水相合成光谱可调的水溶性CdTe/CdS核/壳结构量子点的方法:向新鲜制备的CdTe量子点溶液中加入硫源,继续反应即可生成CdS壳层,通过控制硫源的浓度即可控制CdS壳层厚度,从而调节光谱性质和增强稳定性.采用XRD、TEM、HRTEM、荧光光谱以及紫外-可见光...     

谷胱甘肽稳定的高性能CdTe/CdS核壳型量子点制备及应用于荧光免疫检测米醋中痕量黄曲霉毒素B1

谷胱甘肽作稳定剂水相合成CdTe/CdS核壳型量子点,以EDC/NHS为活化剂对黄曲霉毒素B1(AFB1)抗体进行量子点标记,然后用牛血清蛋白封闭抗体。通过对量子点和标记抗体性能的研究发现,CdTe/CdS核壳型量子点荧光的强度和稳定性较裸壳的CdTe量子点分别提高了4倍和2倍以上。由于谷胱甘肽碳链较长,量子点对抗体尤其是活性位点处的空间构型影响减少,从而改善了量子点标记抗体的稳定性和活性,CdTe/CdS标记的AFB1抗体与AFB1免疫前后荧光强度变化显示抗体至少可以稳定6 d。基于谷胱甘肽稳定的高性能CdTe/CdS量子点,建立了一种荧光免疫检测黄曲霉毒素B1的新方法。AFB1浓度在0.68～40 pmol/L之间荧光强度与浓度呈线性关系,相关系数(R2)为0.9914,检出限为0.3 pmol/L。方法已成功应用于米醋样品中痕量黄曲霉毒素B1的测定。     

A sensitive sensor for anthraquinone anticancer drugs and hsDNA based on CdTe/CdS quantum dots fluorescence reversible control

Based on CdTe/CdS quantum dots (CdTe/CdS QDs) fluorescence (FL) reversible control, a new and sensitive FL sensor for determination of anthraquinone (AQ) anticancer drugs (adriamycin and daunorubicin) and herring sperm DNA (hsDNA) was developed. Under the experimental conditions, FL of CdTe/CdS QDs can be effectively quenched by AQ anticancer drugs due to the binding of AQ anticancer drugs on the surface of CdTe/CdS QDs and photoinduced electron transfer (PET) process from CdTe/CdS QDs to AQ anticancer drugs. Addition of hsDNA afterwards brought the restoration of CdTe/CdS QDs FL intensity, as AQ anticancer drugs peeled off from the surface of CdTe/CdS QDs and embedded into hsDNA double helix structure. The liner ranges and the detection limits of FL quenching methods for two AQ anticancer drugs were 0.33-9 μg mL⁻¹ and 0.09 μg mL⁻¹ for ADM and 0.15-9 μg mL⁻¹ and 0.04 μg mL⁻¹ for DNR, respectively. The restored FL intensity was proportional to concentration of hsDNA in the range of 1.38-28 μg mL⁻¹and the detection limit for hsDNA was 0.41 μg mL⁻¹. It was applied to the determination of AQ anticancer drugs in human serum and urine samples with satisfactory results. The reaction mechanism of CdTe/CdS QDs FL reversible control was studied.     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

Enhanced chemiluminescence from reactions between CdTe/CdS/ZnS quantum dots and periodate

A novel chemiluminescence (CL) performance of CdTe/CdS/ZnS quantum dots (QDs) with periodate (KIO₄) was studied. Effects of concentration and pH on the CL system were investigated. Electron spin resonance (ESR) and the effects of radical scavenger analysis were employed for identification of intermediate species. The CL spectra for this system showed only one maximum emission peak centered around 620 nm, which was similar with photoluminescence (PL) spectra of CdTe/CdS/ZnS QDs. The CL of CdTe/CdS/ZnS QDs was induced by direct chemical oxidation and the possible mechanism could be explained by radiative recombination of injected holes and electrons. This investigation not only provided new sight into the optical characteristics of CdTe/CdS/ZnS QDs, but also broadened their potential optical utilizations.     

CdTe/CdS荧光探针测定痕量铜(Ⅱ)

以巯基乙酸为稳定剂,在水溶液中合成CdTe/CdS量子点,基于量子点与Cu2+混合后发生荧光猝灭作用,建立CdTe/CdS量子点作为荧光探针检测微量铜的新方法。在pH 4.60的HAc-NaAc缓冲溶液中,反应时间为10 min时,Cu2+质量浓度在0.01～1.00μg/mL范围与CdTe/CdS量子点的荧光猝灭程度呈良好的线性关系,相关系数为0.9978,检出限为9.90×10-3μg/mL。方法可以用于雨水、自来水和延河水中Cu2+的分析。     

紫外-可见吸收光谱和荧光光谱研究壳核型 CdTe/CdS量子点与盐酸巴马汀的相互作用及其分析应用

合成了巯基乙酸(TGA)修饰的壳核型CdTe/CdS量子点(TGA-CdTe/CdS QDs), 利用紫外-可见光谱和荧光光谱研究了TGA-CdTe/CdS QDs与盐酸巴马汀(PC)的相互作用机理. 结果表明, 在pH=7.4的Tris-HCl缓冲液中, QDs与PC相互作用后使QDs的荧光呈线性猝灭, 并有良好的线性关系(r=0.997), 线性范围为25~1×10⁴ ng/mL, 检出限(3σ)为7.7 ng/mL. 建立了一种快速简便、 可定量测定PC的新方法.     

CdTe/CdS核壳量子点与蛋白质荧光标记

利用连续离子层吸附技术合成了水溶性的CdTe／CdS核壳量子点．通过CdS壳层的包覆,量子点的量子效率由原来的15％（裸核）提高到38％（核壳）,这种核壳结构量子点的化学和光学性质具有更好的稳定性,可以用于生物标记．本文采取共价连接与静电吸附两种方法,实现了量子点的生物标记,电泳技术已证明,应用这种量子点成功地实现了对蛋白质分子的生物标记．通过对量子点与蛋白质偶联前后的荧光光谱分析,发现量子点与蛋白质作用后荧光增强是由于蛋白质对量子点进行了表面修饰,从而降低了表面缺陷引起的非辐射跃迁几率所致．通过共价连接量子点的荧光峰位红移,主要是由于偶极-偶极相互作用引起的;量子点与蛋白质静电吸附作用引起的荧光峰位蓝移主要起因于量子点表面电荷量的降低．     

Effect of CdS Interlayer on Properties of CdTe Based Quantum Dots

Highly luminescent thioglycolic acid-capped CdTe-based core/shell quantum dots (QDs) were synthesized through encapsulating CdTe QDs in various inorganic shells including CdS, ZnS and CdZnS. CdTe/CdS core/shell QDs exhibited a significant redshift of emission peaks (a maximum emission peak of 652 nm for the core/shell QDs and 575 nm for CdTe cores) with increasing shell thickness. In contrast, the redshift of photoluminescence (PL) peak wavelength of CdTe/ZnS QDs was less than 15 nm. The PL peak wavelengths of the core/shell QDs depended strongly on core size and shell thickness. The PL quantum yields (QYs) of the CdTe/CdS core/shell QDs are up to 67 % while that of CdTe/ZnS core/shell QDs is 45 %. A composite CdZnS shell made CdTe cores a high PL QY up to 51 % and broadly adjusted PL spectra (a maximum PL peak wavelength of 664 nm). The epitaxial growth of the shell was confirmed by X-ray powder diffraction analysis and luminescence decay experiments. Because of high PL QYs, tunable PL spectra, and low toxicity from a ZnS surface layer, CdTe/CdZnS core/shell QDs will be great potential for bioapplications.     

Photoinduced Electron Transfer between CdS and CdTe Nanoparticles in Colloidal Solutions

The photochemical behavior of solutions containing a mixture of CdS and CdTe nanoparticles under pulsed irradiation conditions was investigated. It was shown that electron transfer from the CdS particles to the CdTe nanoparticles occurs during the photoexcitation of such systems. The effectiveness of the process is increased with increase in the size of the CdTe nanoparticles. Such behavior is due to decrease in the potential of the CdTe conduction band with increase in the size of the nanoparticles as a result of the appearance of quantum-dimensional effects.     

ITO/TiO2表面电沉积CdS纳米粒子及其薄膜的光电性能

采用阴极恒电位沉积方法, 在TiO2表面沉积制备出CdS纳米粒子. XRD和SEM测试结果表明, CdS粒子的结构以六方晶相为主, 粒径分布均匀, 表面形貌呈菜花状. 通过调节沉积电位和沉积时间等因素在一定程度上可以控制CdS纳米粒子的生长. 随着沉积电位变负, CdS粒子的粒径逐渐减小. 沉积时间越短, 粒子粒径越小. 紫外-可见吸收光谱测试结果表明, 不同条件下制备出来的CdS粒子表现出一定的量子尺寸效应. 此外, 沉积条件也会影响ITO/TiO2/CdS复合半导体薄膜的光电性能.     

Microwave-assisted growth and characterization of water-dispersed CdTe/CdS core-shell nanocrystals with high photoluminescence

A novel microwave-assisted method of growth of high-quality CdTe/CdS core-shell nanocrystals in the aqueous phase is presented in this paper. The photoluminescence quantum yield (PLQY) is greatly enhanced by epitaxial growth of the CdS shell. Under optimum conditions, the PLQY of as-prepared nanocrystals reaches as high as 75% without any post-treatment. Furthermore, these investigations demonstrate that microwave irradiation is tremendously useful for fast epitaxial growth of nanocrystals due to its special characteristics. As a result, the microwave synthesis is sufficiently time-economizing (only five minutes are required) to obtain optimum amounts of CdTe/CdS core-shell nanocrystals in comparison to the conventional illumination method (several days are required). Therefore, this current research not only provides a rapid microwave synthesis for producing highly fluorescent CdTe/CdS core-shell nanocrystals, but also it presents some advantages of the microwave synthesis in comparison to the illumination method.     

CdTe/CdS半导体量子点作为农药百草枯的高灵敏传感器

用硫普罗宁(Tiopronin, TP)作为稳定剂合成了水溶性的高荧光CdTe/CdS量子点. 研究了该量子点与10种农药的相互作用. 实验发现, 当农药浓度为4.76×10^-6 mol/L时, 农药百草枯(Paraquat)能显著猝灭CdTe/CdS量子点的荧光, 使其荧光强度下降87.3%, 而分别加入乙酰甲胺磷及辛硫磷等其它9种农药, 仅能使CdTe/CdS量子点的荧光强度下降0.1%～5.1%, 显示了该CdTe/CdS量子点对百草枯的特异性传感作用. 采用吸收光谱和时间分辨荧光动力学研究了百草枯对CdTe/CdS量子点的荧光猝灭机理. 计算得出荧光强度猝灭的Stern-Volmer常数K为2.03×10⁶, 而寿命猝灭的Stern-Volmer常数K为4.25×10⁵. 结果表明, 百草枯对CdTe/CdS量子点的荧光猝灭主要为静态过程, 而动态过程的贡献较小. 利用二者的猝灭作用建立了对农药百草枯的高灵敏检测新方法, 校正曲线的线性范围为9.90×10^-9～1.50×10^-6 mol/L, 检出限为6.35×10^-9 mol/L, R=0.999. 用该方法对3种食品和3种水样中残留农药进行了检测, 加标回收率均在82.2%～98.5%之间, 其相对标准偏差为2.62%~8.35%.