“一锅法”制备C18-硅胶杂化毛细管整体柱及其应用

本文发展了一种“一锅法”制备C18-硅胶杂化毛细管整体柱的方法。发展了一种“一锅法”制备有机-无机杂化毛细管整体柱的方法。首先将四甲氧基硅烷、乙烯基三甲氧基硅烷在弱酸条件下水解,然后加入有机单体(甲基丙烯酸-N,N-二甲基十八烷基溴化铵乙酯)及自由基聚合引发剂,同步原位完成硅羟基间的缩聚反应及双键间的自由基聚合反应,从而制成C18-硅胶杂化整体柱;同时用毛细管电色谱(CEC)和毛细管液相色谱(CLC)对其柱效和分离能力进行了初步评价,并将其应用到微柱液相色谱-串联质谱对牛血清白蛋白酶解液的分离分析。结果表明,该C18-硅胶杂化整体柱具有较高的柱效和较好的重现性,在分离分析复杂生物样品方面具有较大的应用前景。此外,本文所发展的方法在制备杂化整体柱的过程中不借助相应的硅烷试剂,为杂化整体柱的制备提供了一种新的思路。     

新型有机-无机杂化整体柱的制备及其在毛细管液相色谱及加压毛细管电色谱中的应用

以丙烯酰胺(AM)为单体,八乙烯基倍半硅氧烷(POSS)为交联剂,偶氮二异丁腈(AIBN)为引发剂,四氢呋喃(THF)为致孔剂,通过原位聚合法制备了poly(POSS-co-AM)有机-无机杂化整体柱,并对各反应物的配比进行了优化。结果表明,当功能单体与致孔剂、POSS与AM的质量比均为1.0: 5.0, AIBN的质量分数为0.1%时,杂化整体柱的柱效最高。无机材料的引入使整体柱结构均匀并具有良好的渗透性,该整体柱既能用于亲水色谱模式,也能用于反相色谱模式。将制备的整体柱用于毛细管液相色谱和加压毛细管电色谱分离核苷类、胺类、硝基苯胺类等化合物,获得了良好的效果。     

聚(4-乙烯基苯硼酸-季戊四醇三丙烯酸酯)亲和整体柱的制备与应用

以4-乙烯基苯硼酸为单体,季戊四醇三丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,乙二醇和二甘醇为致孔剂,经原位聚合制备了聚(4-乙烯基苯硼酸-季戊四醇三丙烯酸酯)毛细管整体柱.以单体、交联剂、致孔剂和引发剂的用量为4种因素,最大吸附量、柱效和保留时间为3个考察标准,利用实验设计软件(DOE)优化了其合成条件,验证了正交实验最优结果,得到了整体柱合成的最佳配比为单体7.32 mg,交联剂6 mg,致孔L剂100 μL,引发剂1 mg.在最佳条件下合成整体柱,并进行表征,在微径液相色谱(μHPLC)和加压毛细管电色谱(pCEC)实验中考察了分离特性.结果表明,整体柱固定相表面的硼酸基团在碱性条件下能特异性吸附邻苯二酚、腺苷等含有邻二羟基结构的化合物,具有亲和色谱的特性;同时由于交联剂的性质使其具有反相分离机理,在含有20％有机相的条件下能够将极性不同的苯系物分开.     

毛细管电色谱硅胶整体柱的制备与性能研究

以甲基丙烯酸丙酯基三甲氧基硅烷(MPTMS)为单体,甲苯为致孔剂,偶氮二异丁腈(AIBN)为引发剂,盐酸为催化剂,采用热引发法制备毛细管电色谱硅胶整体柱.在反相毛细管电色谱条件下,对中性化合物硫脲,苯,萘,芴,蒽实现了基线分离了.柱效超过100,000 plates/m.探讨了该柱的制备条件如单体比例,毛细管内径,制柱反应时间对分离的影响,并且在电色谱条件下考察了有机溶剂比例,pH值,电压和温度对分离的影响.     

光聚合法快速制备甲基丙烯酸酯类毛细管整体柱

采用甲基丙烯酸正丁酯(BMA)为功能单体, 乙二醇二甲基丙烯酸酯(EDMA)为交联剂, 正丙醇、1,4-丁二醇和水为致孔剂, Irgacure 1800为引发剂, 在毛细管内采用光引发原位聚合150 s快速制备了有机聚合物整体柱. 分别采用电色谱(CEC)、加压电色谱(p-CEC)和低压色谱(LPLC)模式对所制备的整体柱进行了性能评价, 基线分离了硫脲、甲苯、萘和联苯, 在加压电色谱(p-CEC)模式下硫脲的最低理论塔板高度达到了8.0 μm. 扫描电镜结果表明, 整体材料在毛细管柱中形成并与毛细管内壁结合紧密.     

硼酸亲和整体柱在富集中药活性物质中的应用

以4-乙烯基苯硼酸(VPBA)为功能单体,季戊四醇三丙烯酸酯(PETA)为交联剂,乙二醇和二甘醇为二元致孔剂,通过热引发自由基聚合反应,在毛细管内原位聚合制备得到一种poly(VPBA-co-PETA)毛细管整体柱。所制备的整体柱具有典型的硼酸亲和特性,可以特异性地捕获含有顺二羟基的化合物。在前期实验的基础上,将其用于两种中草药 蒲公英和刺果卫矛中含顺二羟基的小分子活性物质的富集。这两种中药提取物直接用高效液相色谱进行检测时,其活性成分绿原酸等因含量太低而使检测困难或无法检测;经过硼酸亲和整体柱富集后收集洗脱液进行检测,色谱峰响应则显著提高。该结果表明所制备的poly(VPBA-co-PETA)整体柱可以作为富集中药提取物中含顺二羟基活性物质的有效手段。     

基于苯氧基联烯的两亲性嵌段共聚物的合成

运用机理转换策略,结合自由基聚合和原子转移自由基聚合(ATRP),制备了含有聚联烯链段的两亲性三嵌段共聚物.设计合成了含有偶氮和ATRP引发基团的双官能团引发剂,先用该双官能团引发剂引发苯氧基联烯单体的自由基聚合,得到了含有ATRP引发基团的聚联烯大分子引发剂,然后该大分子引发剂引发亲水性单体N,N-二乙基氨乙基甲基丙烯酸酯(DEAEMA)的ATRP聚合,制得了聚N,N-二乙基氨乙基甲基丙烯酸酯-聚联烯-聚N,N-二乙基氨乙基甲基丙烯酸酯(PDEAEMA-b-PPOA-b-PDEAEMA).该三嵌段共聚物能在水溶液中形成胶束,通过荧光探针技术分别测定了它在不同离子浓度、不同p H值条件下的临界胶束浓度.实验结果表明,该聚合物胶束的cmc随着p H值增大而减小,随着离子浓度的增大而增大.     

联二萘酚印迹的电色谱整体柱的制备

讨论了分子印迹毛细管电色谱整体柱的制备.联二蔡酚作为印迹分子在热引发条件下聚合,其中甲基丙烯酸为功能单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯和异辛烷为致孔剂.考察了聚合参数对整体柱通透性及手性分离的影响.联二萘酚对映体在印迹整体柱上得到了基线分离,Rs值可达1.8.     

甲基丙基酸丁酯/SiO2/TiO2有机-无机杂化毛细管整体柱的制备及应用

采用溶胶-凝胶法制备了SiO2/TiO2杂化材料,并通过双官能团试剂3-(甲氧基硅烷基)甲基丙烯酸丙酯(γ-MAPS)对其进行改性;改性溶胶与甲基丙基酸丁酯(BMA)作为功能单体,在毛细管中进行原位聚合反应,制备了新型的有机-无机杂化毛细管整体柱。 采用扫描电子显微镜观察了整体柱柱床的形貌。 以硫脲为电渗流标记物对所制备的整体柱进行了柱性能评价,考察了柱的稳定性和重现性,获得了88000 plates/m的柱效;考察了中性物质在柱上的的保留行为,得出该柱具有反相电色谱保留性能。 通过对2种短肽(磷酸肽和非磷酸肽)洗脱测试,实现了对磷酸肽的有效富集与分离。     

甲基丙基酸丁酯/SiO_2/TiO_2有机-无机杂化毛细管整体柱的制备及其应用

采用溶胶-凝胶法制备了SiO2/TiO2杂化材料,并通过双官能团试剂3-(甲氧基硅烷基)甲基丙烯酸丙酯(γ-MAPS)对其进行改性;改性溶胶与甲基丙基酸丁酯(BMA)作为功能单体,在毛细管中进行原位聚合反应,制备了新型的有机-无机杂化毛细管整体柱。采用扫描电子显微镜观察了整体柱柱床的形貌。以硫脲为电渗流标记物对所制备的整体柱进行了柱性能评价,考察了柱的稳定性和重现性,获得了88000plates/m的柱效;考察了中性物质在柱上的的保留行为,得出该柱具有反相电色谱保留性能。通过对2种短肽(磷酸肽和非磷酸肽)洗脱测试,实现了对磷酸肽的有效富集与分离。     

Preparation and application of hydrophobic hybrid monolithic columns containing polyhedral oligomeric silsesquioxanes for capillary electrochromatography

Hydrophobic organic-inorganic hybrid monolithic columns were synthesized via thermally initiated free radical polymerization with the confines of 75 μm id capillary using a polyhedral oligomeric silsesquioxane (POSS) reagent containing eight or more methacrylate groups as the crosslinker. Three organic functional monomers, butyl methacrylate (BuMA), lauryl methacrylate (LMA) and methacrylic acid (MAA), were selected and copolymerized with the POSS in the presence of 1-propanol and 1,4-butanediol to prepare the poly(POSS-co-BuMA), poly(POSS-co-LMA), and poly(POSS-co-MAA) monoliths, respectively. The 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) was copolymerized as ionizable monomer into the poly(POSS-co-BuMA) and poly(POSS-co-LMA) for the generation of EOF in capillary electrochromatography (CEC). A hybrid poly(POSS-co-LMA-co-MAA) monolith was also similarly prepared by copolymerizing ternary monomers of POSS, LMA, and MAA, and compared with poly(POSS-co-BuMA), poly(POSS-co-LMA), and poly(POSS-co-MAA) monoliths. The resulting four kinds of POSS-contained hybrid monoliths exhibited good permeability and mechanical stability. Their column efficiencies were evaluated by the separation of alkylbenzene homologues and polar compounds in CEC. The results indicated that the highest efficiencies of 194,100 and 102,100 theoretical plates per meter for thiourea and benzene were obtained on the poly(POSS-co-LMA-co-MAA) monolith. Additionally, the poly(POSS-co-LMA-co-MAA) monolith exhibited better selectivity for separation of polar compounds than those of other hybrid monoliths.     

Polyhedral oligomeric silsesquioxanes as functional monomer to prepare hybrid monolithic columns for capillary electrochromatography and capillary liquid chromatography

A simple approach to fabricate hybrid monolithic column within the confines of fused-silica capillaries (75 μm i.d.) was introduced. A polyhedral oligomeric silsesquioxanes (POSS) reagent containing a methacrylate group was selected as functional monomer, and copolymerized with bisphenol A dimethacrylate (BPADMA) or ethylene dimethacrylate (EDMA) in the presence of porogenic solvents via thermally initiated free radical polymerization. After optimization of the preparation conditions, two POSS-containing hybrid monoliths were successfully prepared and exhibited good permeability and stability. By comparison of the separation efficiencies of the resulting poly(POSS-co-BPADMA) and poly(POSS-co-EDMA) monoliths in capillary electrochromatography (CEC) and capillary liquid chromatography (cLC), it was indicated the former has better column efficiencies for alkylbenzenes, phenols, anilines and PAHs in CEC and cLC than the latter. Particularly, the hybrid poly(POSS-co-BPADMA) monolith is more suitable for separation of PAHs due to π–π interaction between the analytes and aromatic rings in the surface of monolithic stationary phase.     

Preparation of high efficiency and highly retentive monolithic silica capillary columns for reversed-phase chromatography by chemical modification by polymerization of octadecyl methacrylate

High efficiency and highly retentive monolithic silica capillary columns were obtained by polymerization of octadecyl methacrylate using alpha,alpha'-azobis-isobutyronitrile (AIBN) as a free radical initiator. Hybrid type monolithic silica columns (25 cm total length x 200 microm I.D.) prepared from a mixture of tetramethoxysilane and methyltrimethoxysilane were used as a support. The effects of the monomer and the radical initiator concentrations in the reaction mixture were examined. The performance of the columns was tested in terms of column efficiency and retention behavior by using alkylbenzenes and a few other compounds as solutes and compared with that of hybrid monolithic silica columns modified with octadecylsilyl-(N,N-diethylamino)silane (ODS-DEA). Highly retentive monolithic silica columns were obtained by polymerization at high monomer concentrations. Although a decrease in column efficiency was observed with the increase in the monomer concentration in a feed mixture, an improvement in efficiency was achieved (a plate height value lower than 10 microm) by increasing an initiator concentration without significant variations in column retention properties. Results obtained by polymerization using other monomers are also presented to demonstrate the applicability of the preparation method.     

Synthesis of hydrophilic boronate affinity monolithic capillary for specific capture of glycoproteins by capillary liquid chromatography

Boronate affinity chromatography is an important tool for specific isolation of cis-diol-containing compounds such as glycoproteins, RNA and carbohydrates. Boronate functionalized monolithic capillaries have been recently developed for specific capture of cis-diol-containing small biomolecules, but the apparent hydrophobicity of the columns prevents them from specific capture of glycoproteins. In this paper, a hydrophilic boronate affinity monolithic capillary was prepared by in situ free radical polymerization, using 4-vinylphenylboronic acid (VPBA) and N, N′-methylenebisacrylamide (MBAA) as functional monomer and cross-linker, respectively. The prepared poly(VPBA-co-MBAA) monolithic capillary exhibited uniform open channel network and high density of accessible boronic acid. Due to the utilization of hydrophilic cross-linker, the prepared column was hydrophilic, allowing for specific capture of glycoproteins.     

Fabrication of a poly(styrene-octadecene-divinylbenzene) monolithic column and its comparison with a poly(styrene-divinylbenzene) monolithic column for the separation of proteins

In this paper, a poly(styrene-octadecene-divinylbenzene) (PS-OD-DVB) monolithic column was prepared in one step by introducing a C18 carbon chain as monomer. N,N-Dimethylformamide and decanol served as porogens to make a homogeneous polymerization mixture in a fused silica capillary (320 microm inner diameter). Its physical and chromatographic properties were compared with those of poly(styrene-divinylbenzene) (PS-DVB) monolithic column, which was also fabricated by in-situ polymerization in a fused silica capillary with the same inner diameter. Six standard proteins were used to evaluate the columns and their potential application for the separation of human hemoglobin was also discussed. It was shown that the PS-OD-DVB and PS-DVB monoliths appeared to have similar efficiency for rapid separation of six proteins within 3.5 min. The PS-OD-DVB monolith was found to have higher loading capacity and higher resolution for the separation of alpha and beta chains of hemoglobin because of the introduction of C18 carbon chains, and shows great potential for the separation of bio-macromolecules.     

Counterflow isotachophoresis in a monolithic column

This study describes stationary counterflow isotachophoresis (ITP) in a poly(acrylamide‐co‐N,N′‐methylenebisacrylamide) monolithic column as a means for improving ITP processing capacity and reducing dispersion. The flow profile in the monolith was predicted using COMSOL's Brinkman Equation application mode, which revealed that the flow profile was mainly determined by monolith permeability. As monolith permeability decreases, the flow profile changes from a parabolic shape to a plug shape. An experimental monolithic column was prepared in a fused‐silica capillary using an ultraviolet‐initiated polymerization method. A monolithic column made from 8% (wt.) monomer was chosen for the stationary counterflow ITP experiments. Counterflow ITP in the monolithic column showed undistorted analyte zones with significantly reduced dispersion compared to the severe dispersion observed in an open capillary. Particularly, for r‐phycoerythrin focused by counterflow ITP, its zone width in the monolithic column was only one‐third that observed in an open capillary. These experiments demonstrate that stationary counterflow ITP in monoliths can be a robust and practical electrofocusing method.     

Organic polymer monoliths as stationary phases for capillary HPLC

Modern rigid porous polymer monoliths were conceived as a new class of stationary phases in classical columns in the early 1990s and later extended to the capillary format. These monolithic materials are typically prepared using a simple molding process carried out within the confines of the capillary. Polymerization of a mixture comprising monomers, initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. Since all the mobile phase must flow through the monolith, convection considerably accelerates mass transport within the monolithic separation medium and improves the separations. As a result, monolithic columns perform well even at very high flow rates. Various mechanisms including thermally and UV initiated free radical polymerization as well as ring opening metathesis copolymerizations were demonstrated for the preparation of monolithic capillary columns. The versatility of these preparation techniques was demonstrated by their use with hydrophobic (styrene, divinylbenzene, butyl methacrylate, ethylene dimethacrylate), hydrophilic (2-hydroxyethyl methacrylate, methacrylamide, methylenebisacrylamide), ionizable (vinylsulfonic acid, 2-acrylamido-2-methyl-propanesulfonic acid), and tailor-made (norborn-2-ene, 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene) monomers. Variation of polymerization conditions enables control of the porous properties of the monolith over a broad range and mediates the hydrodynamic properties of the monolithic columns. The applications of polymer-based monolithic capillary columns are demonstrated for numerous separations in the microHPLC mode.     

胃蛋白酶亲和有机聚合物毛细管整体柱的制备及性能考察

以热引发原位聚合方法制备了聚（甲基丙烯酸缩水甘油酯（glycidyl methacrylate,GMA）-乙二醇二甲基丙烯酸酯（ethyleneglycol dimethacrylate,EDMA））毛细管整体柱,对整体柱的性能进行了表征。结果表明,柱内部结构均匀、渗透性好;整体柱能够实现苯等中性小分子化合物的分离,具有反相色谱特征,重现性和稳定性良好。利用整体柱环氧基团的活性,采用间接法,以戊二醛为连接臂制备胃蛋白酶亲和手性整体柱。在毛细管电色谱模式下进行了柱分离性能研究,并对缓冲液pH值和运行电压等分离条件进行了考察。结果表明,亲和整体柱对4种碱性手性药物（奈福泮、氨氯地平、西酞普兰、扑尔敏）有拆分效果,奈福泮、氨氯地平、西酞普兰能达到基线分离。本文为蛋白质亲和毛细管电色谱整体柱的制备和应用提供了新的思路和方法。     

Methacrylate monolithic columns of 320 microm I.D. for capillary liquid chromatography

Monolithic capillary columns (320 microm I.D.) were prepared for capillary liquid chromatography (CLC) by radical polymerization of butylmethacrylate (BMA) and ethylenedimethacrylate (EDMA) in the presence of a porogen solvent containing propan-1-ol, butane-1,4-diol and water. The influence of the contents of the porogen solvent and EDMA in the polymerization mixture on the monolith porosity and column efficiency was investigated. The composition of the polymerization mixture was optimized to attain a minimum HETP of the order of tens of microm for test compounds with various polarities. The separation performance and selectivity of the most efficient monolithic column prepared was characterized by van Deemter curves, peak asymmetry factors and Walters hydrophobicity and silanol indices. It was demonstrated that the 320-microm I.D. monolithic column exhibited CLC separation performance similar to that observed for 100- and 150-microm I.D. monolithic columns reported in the literature; moreover, the 320-microm I.D. column was easier to operate in CLC and exhibited a higher sample loadability.