CuNaY分子筛的制备及其催化甲醇氧化羰基化

采用多种铜盐溶液与NaY分子筛离子交换制备了CuNaY催化剂,通过加入氨水提高溶液pH值以及高温活化,显著提高了该催化剂对甲醇氧化羰基化合成碳酸二甲酯的反应活性。不同的铜盐水溶液交换制备的CuNaY催化剂催化活性不同,添加氨水将溶液pH值调节为11后,离子交换制备的CuNaY催化剂的催化活性和DMC选择性明显升高且趋于一致。经元素分析、XRD、XPS和H₂-TPR表征可知,加入氨水可促进Cu²⁺离子交换的进行,提高CuNaY催化剂中Cu的交换量,催化剂中约75%的Cu²⁺定位于分子筛的超笼中。     

碱金属阳离子对Cu+Y催化甲醇氧化羰基化性能影响的密度泛函理论研究

基于密度泛函理论方法构建并优化了CuMY(M为碱金属阳离子)分子筛的稳定构型, 采用速控步骤CO插入CH₃O形成CH₃OCO反应, 研究了碱金属阳离子对Cu⁺Y分子筛中活性中心周围电子环境及催化甲醇氧化羰基化合成碳酸二甲酯性能的影响. 计算结果表明, Li⁺, Na⁺和K⁺稳定落位于Y分子筛小笼中, 且随着金属离子半径的增大, CH₃OH, CO, CH₃O在CuMY上的吸附能和CO/CH₃O的共吸附能均逐渐增加, CO插入CH₃O反应的过渡态结构稳定性逐渐降低, 活化能逐渐上升, 相应的反应活性逐渐下降. 而落位在超笼中Ⅱ^*位的Rb⁺与Cs⁺则随着离子半径的增大, 反应过渡态的结构稳定性提高, 克服的活化能降低, 反应活性升高. 不同CuMY分子筛上催化活性顺序为CuLiY-Ⅰ'>CuCsY-Ⅱ^*>CuNaY-Ⅰ'>CuRbY-Ⅱ^*>CuKY-Ⅰ'>CuCuY-Ⅰ', 其中CuLiY-Ⅰ'分子筛克服速控反应的活化能垒(52.74 kJ/mol)最低.     

Cu+/SiO2-ZrO2催化剂的制备及其催化甲醇氧化羰基化性能

采用溶胶-凝胶法制备了SiO₂-ZrO₂复合氧化物载体,通过和CuCl₂进行离子交换制备了Cu⁺/SiO₂-ZrO₂催化剂,并研究其催化甲醇液相氧化羰基化合成碳酸二甲酯性能。结果表明,Zr以离子形式进入无定型SiO₂骨架结构中形成Si－O－Zr键,同时产生较强的B酸中心。CuCl₂通过热处理自还原为CuCl分散在SiO₂-ZrO₂载体表面,并与载体表面B酸发生离子交换形成Cu⁺物种,从而保留了活性金属组分Cu,脱除大部分的Cl元素,改善催化剂失活和设备腐蚀等问题。当焙烧温度为450℃时,催化剂表现出良好的催化活性,CH₃OH转化率、DMC选择性和时空收率分别达到10.0%、79.4%和1.45g/(g·h)。
     

CuCl_2和HY分子筛的表面反应及Cu/Y分子筛的制备及其催化甲醇氧化羰基化（英文）

以CuCl2为前驱物与HY分子筛进行固相离子交换制备了Cu/Y催化剂,采用热重方法研究了CuCl2与HY分子筛的表面固相离子交换反应,结合活性测试表明催化剂中高度分散的CuCl和离子交换形式的Cu+物种是甲醇氧化羰基化合成碳酸二甲酯的催化活性中心.X射线光电子能谱表征和元素分析结果表明,活性金属Cu主要以CuCl形式存在于分子筛外表面,而在分子筛笼内则以交换的Cu+和少量吸附的CuCl形式存在.与以CuCl为交换铜源所制催化剂相比,以CuCl2为铜源制备的催化剂Cu含量低,催化活性更高.     

热处理时间对CuZnAl催化剂合成C2+OH性能的影响

采用完全液相法在不同热处理时间下制备了CuZnAl催化剂,利用X射线光电子能谱（XPS）、X射线衍射（XRD）、H₂程序升温还原（H₂-TPR）、NH₃吸附-脱附（NH₃-TPD-MS）和N₂物理吸附-脱附等方法对其结构进行了表征分析,并在浆态床反应器上对其催化合成气制C₂₊OH的性能进行了研究。研究发现,延长热处理时间增强了催化剂中Cu和Al物种之间的相互作用力,改变了其中Cu⁺的量,从而影响Cu⁺-Cu⁰活性位的协同作用。同时,热处理时间的延长减少了催化剂的表面酸量,增大了孔容和孔径;催化剂表面较少的弱酸位及较大孔容和孔径均有利于C₂₊OH的生成。热处理时间为7 h时所制备的CuZnAl催化剂表现出了优良的低碳醇合成催化活性,CO转化率和总醇中C₂₊OH的质量分数分别达到了38.1%和65.9%。     

Ce金属改性对Cu-SAPO-34催化剂水热稳定性能的影响

采用浸渍法制备系列铜铈复合氧化物分子筛催化剂（Cu-Ce/SAPO-34）,探讨了Ce负载量对Cu/SAPO-34催化剂的水热稳定性的影响,通过XRD、SEM、H₂-TPR、XPS和NH₃-TPD等表征手段分析不同催化剂活性和稳定性差异的原因。研究表明,750℃水热老化未造成Cu-Ce/SAPO-34催化剂菱沸石（chabazite,CHA）骨架坍塌,但破坏了部分孔结构和酸性位点,使催化剂表面结晶度下降。水热老化促使催化剂晶格发生拉伸畸变,使Cu²⁺迁移到催化剂表面,Cu²⁺和Ce⁴⁺团簇形成CuO和CeO₂,造成催化剂的Cu活性物种减少和氧空穴浓度降低,所以Cu-Ce/SAPO-34的NH₃选择性催化还原（NH₃-Selective Catalytic Reduction,NH₃-SCR）性能下降。掺杂Ce能提高Cu/SAPO-34催化剂表面的Cu²⁺和Cu⁺活性物种量,减少Cu物种团簇形成CuO,改善催化剂表面活性Cu物种分布性。提高Ce的负载量能稳固Cu-Ce/SAPO-34催化剂的结构,使中、弱强度酸位点得以维持,从而提高其水热稳定性。结果表明,在研究的系列Cu-Ce/SAPO-34催化剂中,Cu/Ce质量比为4：5时具有最佳的水热稳定性。     

铈含量对CeUSY分子筛抗镍性能的影响及机理研究

采用液相离子交换法制备了不同Ce含量的CeUSY分子筛,并通过Mitchell等体积浸渍法对其进行Ni污染,运用ICP-AES、XRD和N₂吸附等温线等方法对其织构性质进行表征,并利用微反应活性评价装置考察了其抗镍性能。结果表明,不同Ce含量改性的USY样品其抗镍效果存在差异,CeUSY分子筛的抗镍效果与Ce含量的关系呈现火山型变化。结合Ni污染前后CeUSY分子筛的H₂-TPR和Py-FTIR表征结果探讨了Ce物种的抗镍机制,证实了Ce物种形态的变化是不同Ce含量的CeUSY分子筛具有不同抗镍效果的重要成因,其中,SOD笼中的Ce（OH）²⁺在高温条件下可与Ni（OH）⁺相互作用,脱去一分子H₂O形成Ce³⁺-O-Ni²⁺的稳定结构,阻碍了Ni物种与骨架铝的结合导致CeUSY分子筛中B酸中心的破坏,同时有效抑制了易还原NiO物种的生成。而Ce含量过高使得SOD笼内的Ce物种变成二聚以及三聚物,与Ni（OH）⁺作用减弱,使其抗镍性能减弱。     

Cu负载Fe柱撑钠化海泡石: 结构特点及其丙烯选择性催化还原NO性质研究

采用羟基铁离子柱撑钠化海泡石改性后, 以浸渍法制备了铜负载铁柱撑钠化海泡石Cu/Fe-NaPILCS催化剂, 作为比较以浸渍法制备了铁负载钠化海泡石(Fe-NaSep), 铜负载钠化海泡石(Cu-NaSep)和铜铁负载钠化海泡石(Cu/Fe-NaSep)催化剂. 并将它们应用于C₃H₆选择性催化还原NO的反应(C₃H₆-SCR). 通过X射线衍射仪(XRD)、TGA-DTG分析、N₂-等温吸附/脱附、H₂-程序升温还原(TPR)和X射线光电子能谱仪(XPS)等技术对样品进行表征. N₂-等温吸附/脱附和TGA-DTG分析结果表明, Fe-NaPILCS的比表面积和孔体积较海泡石原矿具有较大的增加, 热稳定性也明显提高|XRD和XPS结果表明, 在Cu/Fe-NaPILCS催化剂上同时存在Fe^3＋/Fe^2＋和Cu^2＋/Cu^＋不同氧化态的氧化物种, 在Cu和Fe之间存在电子迁移. H₂-TPR结果表明, Cu/Fe-NaPILCS催化剂上存在大量的孤立铜离子物种(isolated Cu^2＋-ions, (Cu^2＋)_i). Fe柱撑钠化海泡石负载的Cu/Fe-NaPILCS催化剂的催化活性明显优于未柱撑海泡石负载的Cu/Fe-NaSep催化剂, 这可能与Cu/Fe-NaPILCS具有较大的比表面积、孔体积和更优的氧化还原性能, 及其具有更多有利于C₃H₆-SCR反应的(Cu^2＋)_i物种有关.     

CuCl2和HY分子筛的表面反应及Cu/Y分子筛的制备及其催化甲醇氧化羰基化

以CuCl₂为前驱物与HY分子筛进行固相离子交换制备了Cu/Y催化剂,采用热重方法研究了CuCl₂与HY分子筛的表面固相离子交换反应,结合活性测试表明催化剂中高度分散的CuCl和离子交换形式的Cu⁺物种是甲醇氧化羰基化合成碳酸二甲酯的催化活性中心。X射线光电子能谱表征和元素分析结果表明,活性金属Cu主要以CuCl形式存在于分子筛外表面,而在分子筛笼内则以交换的Cu⁺和少量吸附的CuCl形式存在。与以CuCl为交换铜源所制催化剂相比,以CuCl₂为铜源制备的催化剂Cu含量低,催化活性更高。     

ZrO2添加方法对CuO-ZnO-ZrO2催化剂性能的影响

研究了ZrO₂的两种加入法所得CuO-ZnO-ZrO₂催化剂对CO₂加H₂合成CH₃OH反应催化活性的影响,得到催化剂的最佳含量组成及各种操作条件下的活性规律。采用BET、XRD、TPR、XPS等手段对催化剂表面晶相组成、活性组分存在状态进行了探讨。     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。