AOPAN/PA-66复合纳米纤维膜的制备及对金属离子的吸附性能

采用双喷头电纺丝技术,将尼龙(PA-66)纤维增强的聚丙烯腈(PAN)纳米纤维膜(PAN/PA-66)与盐酸羟胺进行偕胺肟化反应,制备了一种偕胺肟化聚丙烯腈/尼龙复合纳米纤维膜(AOPAN/PA-66).通过红外光谱及扫描电子显微镜等方法研究了偕胺肟化前后纳米纤维膜的组成、形貌和力学性能;并考察了AOPAN/PA-66复合纳米纤维膜对铜离子和铅离子的吸附性能.结果表明,AOPAN/PA-66复合纳米纤维膜的抗拉伸强度及断裂伸长率分别为4.73 MPa和30.76%,对Cu(Ⅱ)及Pb(Ⅱ)的吸附量分别为67.5和75.4 mg/g.     

静电纺丝制备醋酸纤维素复合纳米纤维的研究进展

静电纺丝技术就是通过带电聚合物溶液或熔体的喷射来制备纳米纤维,是一种制备纳米纤维材料简单有效的技术。醋酸纤维素(CA)易溶于有机溶剂,常作为纤维素的替代材料应用于静电纺丝领域。本文总结了近年来国内外采用静电纺丝技术制备CA复合纳米纤维的研究新进展,重点介绍了CA/CNTs复合纳米纤维、CA/金属粒子复合纳米纤维、CA/金属氧化物复合纳米纤维、CA基载药复合纳米纤维、CA/PAN复合纳米纤维、CA/PVA复合纳米纤维、CA/CS复合纳米纤维等CA复合纳米纤维的研究进展以及潜在的应用领域。     

聚丙烯腈纳米纤维载银复合膜绿色制备及其催化性能

采用静电纺丝技术和化学镀方法相结合的方法,用聚丙烯腈(PAN)纳米纤维作为载体,以绿色环保的胺化改性替代化学镀传统的敏化、活化前处理,再化学镀银制备胺化聚丙烯腈纳米纤维载银复合膜(Ag/APAN).SEM、XPS、XRD、FTIR等结果表明,银离子能够吸附在经胺化处理后的PAN纳米纤维表面,且能够在纤维表面生成少量单质银;单质银作为催化活性中心,有效地促进化学镀银的进行,在PAN纳米纤维表面生成均匀致密的银纳米粒子层,制备出了以PAN纳米纤维为核,银层为壳的核壳结构复合膜.银纳米粒子附着在纳米纤维表面,可以使银纳米粒子的催化性能得到充分发挥.通过对催化邻-硝基苯胺与硼氢化钠之间氧化还原反应的研究表明,所制备的Ag/APAN纳米纤维复合膜具有很好的催化效果,且不会造成反应体系的二次污染.     

聚丙烯腈/氧化石墨烯复合纳米纤维的制备与性能研究

以氧化石墨烯为添加物,采用静电纺丝的方法制备不同质量分数的聚丙烯腈/氧化石墨烯(PAN/GO)复合纳米纤维。使用扫描电镜(SEM)、透射电镜(TEM)对复合纳米纤维的微观结构进行观察;采用差示扫描量热仪(DSC)和热重分析仪(TGA)研究复合纳米纤维的热学性能随着氧化石墨烯添加量增加的变化;采用微机控制电子万能试验机对复合纳米纤维的力学性能进行研究。结果表明,加入氧化石墨烯后,纺制的PAN/GO纳米复合纤维会变细,但随着GO添加量的增多出现珠节现象,降低了纤维的粗细均匀度,同时加入GO后对PAN的氧化具有一定的抑制作用,而且GO的加入也使PAN的力学性能增加,当加入量为0.1%时断裂强力增加了一倍,但添加量为1%时,断裂强力又会降低,综合实验结果显示当加入氧化石墨烯的质量分数为0.1%时最适宜。     

静电纺丝技术制备聚苯乙烯/石墨烯复合纳米纤维

通过静电纺丝技术制备了聚苯乙烯/石墨烯复合纳米纤维膜,利用扫描电子显微镜、傅里叶变换红外光谱、粉末X-射线衍射和激光拉曼光谱等技术对所制备的纤维膜结构和组成进行表征,并通过电化学法考察该复合纳米纤维膜的电活性。结果表明,石墨烯已掺杂到聚苯乙烯纤维中。与聚苯乙烯纤维膜相比,聚苯乙烯/石墨烯复合纳米纤维膜导电性能增强,表明本实验成功实现了对聚苯乙烯纤维的改性。     

电纺Pd纳米粒子/碳纳米纤维复合材料对甲醇的电催化氧化研究

利用静电纺丝技术制备了含有乙酰丙酮钯(Pd(Ac)2)前体的聚丙烯腈(PAN)纳米纤维,经H2还原和900℃碳化处理得到了Pd纳米粒子负载的碳纳米纤维复合材料(Pd/CNF).此方法中,CNF的制备和Pd纳米粒子的形成是同步进行的,无需对碳载体进行任何预处理,实现了纳米粒子负载CNF的一步制备,简化了实验步骤的同时确保CNF载体骨架的完整性.扫描电镜(SEM)和透射电镜(TEM)分析表明,大小均一的Pd纳米粒子牢固地分散在CNF表面,其粒径约为60 nm.X-射线衍射(XRD)和X-射线光电子能谱(XPS)表征了Pd/CNF的晶体结构.Pd纳米粒子以单质态形式存在,具有面心立方体结构.通过循环伏安法(CV)和计时电流法等电化学方法研究了Pd/CNF复合材料对甲醇的电催化氧化情况,Pd/CNF对甲醇氧化显示出优异的催化活性和稳定性,优于商业化Pd/C催化剂.     

静电喷雾结合热压处理制备荷负电PVA-SA/PAN纳米纤维基复合滤膜及其纳滤性能研究

以静电纺丝聚丙烯腈(PAN)纳米纤维作为多孔支撑层,以亲水材料聚乙烯醇(PVA)和海藻酸钠(SA)为亲水表层材料,通过静电喷雾技术将亲水表层材料沉积在纳米纤维多孔基膜表面,然后将表层PVA-SA纳米串珠层通过水蒸气加湿辅助热压成膜处理在PAN基膜上软化压延形成完整的致密薄膜,最后经过戊二醛交联制备PVA-SA/PAN纳米纤维基复合滤膜.通过对加湿时间、热压温度、热压时间以及PVA-SA静电喷雾时间等成膜工艺条件和交联条件进行优化制备出结构完整的PVA-SA/PAN纳米纤维基复合滤膜.所制备的复合滤膜荷负电,它对阴离子染料具有较好的过滤效果:在0.6 MPa的操作压力下对100 mg/kg的固绿染料的渗透通量为57.1 L/(m~2h),截留率为96.8%.     

增强复合静电纺纳米纤维膜

静电纺丝纳米纤维膜具有孔隙率高、孔径小、透气性好等优良性能。但由于纤维太细,且纤维间没有有效的粘结,其强度较低,严重限制了它的应用。本文采用高/低熔点热熔性的两种高聚物进行混合静电纺丝,制备了聚丙烯腈/聚偏氟乙烯-六氟丙烯(PAN/PVDF-HFP)、聚偏氟乙烯/聚偏氟乙烯-六氟丙烯(PVDF/PVDF-HFP)复合纳米纤维膜,并通过110℃、3MPa、5min的热压后处理,使PVDF-HFP部分熔融,制得具有点粘结的增强复合纳米纤维膜。测试结果显示,较处理前,增强PAN/PVDF-HFP、PVDF/PVDF-HFP复合纳米纤维膜的拉伸断裂强度分别提高了923.1%和665.7%,达到17.8MPa和26.9MPa,且同时保留了优良的孔隙率与透气性能。     

多次交替浸渍法构筑簇状ZnO的PAN复合纳米纤维膜及其光催化性能

以聚丙烯腈(PAN)与氯化锌(ZnCl2)作为前驱物,采用静电纺丝工艺制备PAN/ZnCl_2复合纳米纤维膜,分别采用多次冷热交替浸渍法和单次冷热静置浸渍法得到簇状PAN/ZnO-1和PAN/ZnO-2复合纳米纤维膜。利用扫描电镜(SEM)、傅里叶红外光谱(FT-IR)、X射线衍射(XRD)、X射线能量色散光谱(XPS)和热重分析仪(TG)对复合纳米纤维膜的表面形貌和微结构进行了表征,并以亚甲基蓝(MB)为污染物模型,评价其光催化降解性能。结果表明:经冷热交替浸渍后,纳米ZnO粒子均匀地附着在PAN纤维表面,尤其在PAN/ZnO-1复合纳米纤维膜表面还出现了花状ZnO粒子;相比单次冷热静置浸渍法处理的PAN/ZnO-2复合纳米纤维膜,经多次冷热交替浸渍的PAN/ZnO-1复合纳米纤维膜循环使用3次后对MB的降解率仍可达到90%以上,具有更好的光催化活性和循环使用性能。同时,MB溶液的初始质量浓度、催化剂用量和染料溶液的pH等因素对样品的的光催化降解率有一定影响。     

静电纺丝制备碳纳米管基复合纳米纤维的研究进展

碳纳米管(CNTs)作为增强材料与聚合物复合制成纳米纤维,有助于提高纳米纤维性能,扩展其应用领域。本文综述了近年来国内外静电纺丝制备CNTs基复合纳米纤维的研究现状,重点介绍了CNTs/PAN复合纳米纤维、CNTs/PANI/PEO复合纳米纤维、CNTs/PVA复合纳米纤维、CNTs/PA复合纳米纤维、CNTs/TiO2复合纳米纤维的研究进展及其在纳米传感器、电磁干扰、超级电容器、染料敏化太阳能电池(DSSCs)、组织工程支架、药物控制释放等方面的应用潜力,展望了CNTs基复合纳米纤维的发展前景。     

Pt@Ag/Pt复合型纳米颗粒的合成与表征

通过吸附在铂纳米颗粒表面的氢交替还原硝酸银和氯铂酸,得到了复合型纳米颗粒Pt@Ag／Pt,用紫外-可见吸收光谱（UV-Vis）、透射电子显微镜（TEM）、X-射线衍射（XRD）对其进行了表征。通过氢化催化苯甲醛反应,由于Pt与Ag双金属间的协同效应,其催化活性较纯铂好。     

Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

Y2O3/Ag3VO4复合可见光催化剂的制备及其光催化性能

以Na3VO4.12H2O,AgNO3和Y(NO3)3.6H2O为原料,采用浸渍法制备了Y2O3/Ag3VO4复合可见光催化剂,并用XRD,SEM,XPS,UV-Vis等测试手段表征了试样的结构和性能。结果显示,Y2 O3/Ag3VO4复合可见光催化剂为单斜结构,Y以Y2 O3的形式分散在Ag3VO4晶体的表面。UV-Vis测试结果表明,Y2O3/Ag3VO4较纯Ag3VO4吸收带边发生了红移,在可见光区的吸收增强;以金属卤灯(波长大于400 nm)为光源,研究了Y2O3/Ag3VO4催化剂对甲基橙(MO)的可见光催化降解性能。结果发现,Y2O3/Ag3VO4复合可见光催化剂的光催化活性较纯Ag3VO4均有大幅提高,其中Y掺杂量为4%时活性最高。     

Synthesis of confined Ag nanowires within mesoporous silica via double solvent technique and their catalytic properties

Ag nanowires within the channels of mesoporous silica have been successfully synthesized via a double solvent technique, in which n-hexane is used as a hydrophobic solvent to disperse mesoporous silica and an AgNO(3) aqueous solution is used as a hydrophilic solvent to fill mesochannels. The morphology of the obtained Ag (nanowires, nanoparticles or nanorods) can be controlled by adjusting the concentration of AgNO(3) solution and the template pore size. HRTEM images demonstrate extensive Ag nanowires with several to tens of hundreds nanometers in length are deposited along the long axis of mesochannels when the atomic AgNO(3)/Si ratio is 0.090. When the atomic AgNO(3)/Si ratio is 0.068 or 0.11, there is a combination of Ag nanoparticles and nanowires; nanoparticles are mainly formed when the atomic AgNO(3)/Si ratio is higher than 0.14. Further, the catalytic results of the oxidation of styrene show that styrene oxide and benzaldehyde are the main products of the reaction, and the morphology and diversity of Ag in Ag/mesoporous silica composites have an effect on the conversion of styrene and selectivity of styrene oxide.     

Ag-PVA和Ag-PVA/TiO2复合超薄膜的制备及性能研究

用3种方法制备了银纳米粒子-聚乙烯醇复合体系,其中用加热还原法所得体系中Ag纳米粒子的尺寸较大(15nm),其表面等离子体共振吸收峰较宽,最大吸收波长位于420nm;用室温硼氢化钠还原法得到的复合体系的吸收峰蓝移至409nm,且峰形较窄,Ag纳米粒子的平均粒径为8.7nm;低温NaBH4还原法所得体系吸收峰进一步蓝移至397nm,此时Ag纳米粒子粒径最小(3.5nm).将室温还原法所得Ag-PVA复合体系旋涂成膜,所得薄膜光滑、透明、均匀性好,该法适用于制备多层薄膜,以调控薄膜的厚度和光谱性质.将Ag-PVA复合体系与钛酸四丁酯(Ti(O_nBu)₄)的乙醇溶液交替旋涂得到Ag-PVA/TiO₂有机/无机复合薄膜.紫外-可见吸收光谱研究表明,随着Ag-PVA层数的增加,薄膜的表面等离子体共振吸收强度呈线性增加,但是TiO₂层数的增加对吸收光谱没有明显影响.Ag-PVA/TiO₂有机/无机复合薄膜将金属纳米粒子、有机高分子与无机半导体材料结合在一起,这种多层纳米结构在光电、催化功能薄膜等方面具有潜在的应用前景.     

A green approach to prepare Ag NPs loaded IC/PVA polymeric film for antimicrobial applications

In this study, glyoxal-cross-linked Iota carrageenan (IC) /poly(vinyl alcohol) PVA films were prepared and loaded with silver nanoparticles via a green approach, consisting of sweet lime juice induced in-situ reduction of Ag(I) ions to nano silver within the film matrix. The formation of silver nanoparticles was confirmed using UV–visible spectrophotometry. The Ag NPs-loaded films were also characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR). The dynamic water uptake data were interpreted by the ‘Power functional model’. The films showed fair antimicrobial action against bacteria E. Coli.     

石墨烯/银复合薄膜的制备及表征

采用静电自组装技术,通过交替沉积聚(二烯丙基二甲基氯化铵)(PDDA)(或硝酸银)和氧化石墨烯,制备氧化石墨烯/PDDA薄膜和氧化石墨烯/硝酸银复合薄膜。然后在600℃下通入氩气和氢气进行气氛还原得到石墨烯薄膜和石墨烯/银复合薄膜。采用AFM、SEM、XPS、UV-Vis以及四探针电阻仪等对薄膜结构及性质进行表征。结果表明,通过静电自组装法可以获得生长均匀的薄膜。对比于相同自组装次数的石墨烯薄膜,石墨烯/银复合薄膜具有更好的透光性和更低的薄膜方块电阻。在λ=500 nm时,四层石墨烯/银复合薄膜的透过率为85%左右,而石墨烯薄膜的透过率为72%左右;石墨烯薄膜的方阻为161.39 kΩ.□-1,而石墨烯/银复合薄膜的方阻为99.11 kΩ.□-1。     

Ag/SBA-15表面催化过程的现场SERS研究

以三嵌段共聚物P₁₂₃为模板剂, 正硅酸乙酯为硅源, 水热合成了介孔分子筛SBA-15, 通过对SBA-15内外表面修饰, 使用银氨溶液和硝酸银溶液作为金属源合成Ag/SBA-15, 透射电镜(TEM)研究表明在SBA-15孔道内较好地分散了颗粒状和棒状的Ag纳米粒子. 以苯硫酚作为探针分子, 研究了负载Ag纳米粒子的SBA-15的SERS效应, 结果表明Ag/SBA-15具有良好的SERS活性. 另外, 该材料对催化硼氢化钠还原对硝基苯酚具有良好的催化效果, 通过结合现场SERS技术, 研究了该催化过程的机理.     

Polyacrylamide/reduced graphene oxide-Ag nanocomposite as highly efficient antibacterial transparent film

In this study, preparation and characterization of polyacrylamide/reduced graphene oxide-Ag (PAM/rGO-Ag) nanocomposites as a new nanocomposite film were investigated. First, PAM/GO nanocomposite was synthesized by in situ polymerization strategy. Afterward, highly stable and uniformly distributed silver nanoparticles (Ag NPs) have been obtained with PAM/GO nanocomposite as nanoreactors via in situ reduction of silver nitrate (AgNO₃) using sodium borohydride (NaBH₄) as reducing agent. In addition, the prepared PAM/rGO-Ag nanocomposite was thermally annealed in order to achieve high-performance nanocomposite film with antimicrobial activities. The prepared nanocomposite was characterized by XRD, FT-IR, SEM, TEM and TGA. The obtained results demonstrate that the silver nanoparticles were well decorated and dispersed on the graphene oxide nanosheets. In fact, the GO nanosheets and polyacrylamide chains act as a support and stabilize the Ag nanoparticles. Moreover, antimicrobial activities of the films were also examined, and the films containing well-dispersed and stabilized Ag nanoparticles showed outstanding antibacterial activity.     

A Simple Method for the Preparation of TiO2/Ag‐AgCl@Polypyrrole Composite and Its Enhanced Visible‐Light Photocatalytic Activity

A novel and facile method was developed to prepare a visible‐light driven TiO₂/Ag‐AgCl@polypyrrole (PPy) photocatalyst with Ag‐AgCl nanoparticles supported on TiO₂ nanofibers and covered by a thin PPy shell. During the synthesis, the PPy shell and Ag‐AgCl nanoparticles were prepared simultaneously onto TiO₂ nanofibers, which simplified the preparation procedure. In addition, because Ag‐AgCl aggregates were fabricated via partly etching the Ag nanoparticles, their size was well controlled at the nanoscale, which was beneficial for improvement of the contact surface area. Compared with reference photocatalysts, the TiO₂/Ag‐AgCl@PPy composite exhibited an enhanced photodegradation activity towards rhodamine B under visible‐light irradiation. The superior photocatalytic property originated from synergistic effects between TiO₂ nanofibers, Ag‐AgCl nanoparticles and the PPy shell. Furthermore, the TiO₂/Ag‐AgCl@PPy composite could be easily separated and recycled without obvious reduction in activity.