SYNTHESES AND STRUCTURES OF POLYPHENYLSILSESQUIOXANES

Phenyltrichlorosilane was hydrolyzed both ifi. toluene and in ether from which two kinds of prepolymers were obtained with different structures, molecular weights, and molecular weight distributions. Polymers were prepared from the prepolymers in various polymerization conditions. The ladderlike, branched, and crosslinked structures formed under different polymerization conditions were characterized by means of FTIR, ~1H and ~(29)Si-NMR, and elemental analysis. Azeotropic distillation of solvents and H_2O formed during polymerization was found useful in removing H_2O from the system and high molecular weight products with perfect ladderlike structure were obtained.     

SYNTHESIS AND-CHARACTERIZATION OF THE SOLUBLE, HIGH MOLECULAR WEIGHT AND LADDERLIKE POLYHYDROSILSESQUIOXANE AND ITS COPOLYMERS

The high molecular ladderlike polyhydrosilsesquioxane (LPHSQ) and its copolymer, ladderlike random copolymethylhydrosilsesquioxane (LR-PMHSQ) and ladderlike block copolymethylsilsesqui-oxane(LB-PMHSQ) have been synthesized by a preaminolysis reaction of the corresponding trichlorosilane with 1 ,4-phenylene diamine(PDA) then by hydrolysis and polycondensation reactions The thermographs of these polymers measured by DSC method indicate that these macromolecular backbones are very rigid as seen from the DSC curves which are almost horizontal from room temperature until 350 ~C without noticeable glass transition. The content of Si—H group in the polymers can be regulated by changing the composition of the two copolymerized monomers. So the ladderlike polymers including its copolymers can be the useful precursors for the functional polymers, especially such as fishbone-like liquid crystalline polymers.     

EFFECT OF POLYMERIZATION CONDITIONS ON THE LADDERLIKE STRUCTURE OF POLYPHENYLSILSESQUIOXANE

The ladderlike structure of PPSQ synthesized by using four kinds of catalysts (MgF_2,LiF, KOH and DCC) at different polymerization conditions has been investigated by IRand NMR. In the system using MgF_2 as the main catalyst, the most important factorwhich affects the ladderlike structure of PPSQ is the composition of the dual catalysts,MgF_2 and DCC. PPSQ prepared by using KOH as the catalyst has the highest regularityof ladderlike structure among all samples. PPSQ with different degree of ladder regularitycan be obtained by choice of polymerization conditions.     

H-BONDING SELF-ASSEMBLED TEMPLATE-CONTROLLED SYNTHESIS OF A NOVEL SOLUBLE AND REACTIVE AMIDE-BRIDGED LADDERLIKE POLYHYDROSILOXANE

A novel soluble and reactive amide-bridged ladderlike polyhydrosiloxane （ALPHS） was first synthesized by an amido H-bonding self-assembled template. ALPHS with molecular weight M^-a = 18300 has very highly ordered ladderlike structure, which was confirmed by a sharp resonance absorption peak of [-Si（H）O2/2 ] moiety with the half peak width △1/2 〈 0.5 in^29Si-NMR spectrum. Presence of the reactive Si-H groups gives ALPHS an opportunity to further derive a variety of functional polymers by versatile Si-H reactions such as hydrosilylation, condensation, and so on.     

反应性梯形聚氢基倍半硅氧烷合成方法的改进

对反应性梯形聚氢基倍半硅氧烷 (H T)的合成方法进行了改进 .首先利用硅羟基与硅氯基之间的脱氯化氢缩聚来代替以前采用的硅羟基间脱水缩聚反应 ,进一步提高了作为梯撑的对苯二胺之间氢键在聚合反应中的模板作用 .另外利用三甲基氯硅烷与对苯二胺梯撑的聚硅氧烷中间体的末端硅羟基进行封端反应 ,从而保证在脱除对苯二胺梯撑模板分子过程中避免进一步的无规缩合导致支化或交联 ,得到的反应性梯形聚氢基倍半硅氧烷 (H T)的规整性有所改善 .热分析结果表明与单链聚二甲基硅氧烷的Tg(- 12 3℃ )相比 ,其Tg 高达 117 0℃ ,证明这种梯形高分子具有刚性链结构 .尤其是2 9Si NMR谱中代表梯形主链上硅原子 (SiO3 2 )峰的基线宽度Δ =5 ,而采用硅羟基间脱水缩合方法得到聚合物的Δ =8～ 10 .表明该反应性梯形聚氢基倍半硅氧烷H T的规整性得到了明显的提高 .而且 ,该聚合物又是第一个可溶性、反应性、纯梯形主链无机高分子 ,它可以进一步通过硅 氢侧基接枝反应制备不同类型的梯形无机主链功能高分子 .     

SYNTHESIS OF LADDERLIKE POLYHYDROXYPROPYLSILSESQUIOXANE

Ladderlike polyhydroxypropylsilsesquioxane (HO-T) was synthesized by alcoholysis of ladderlike poly(3-propionyloxy-propyl)silsesquioxane. The HO-T was characterized by GPC, IR, NMR, DSC, TGA and X-ray diffractionmethods. Through hydrogen-bonding interaction, ladderlike polymer (HO-T) can form a supramolecular complex withsomewhat regular structure.     

THE HYDROSILYLATION REACTION OF LADDERLIKE POLYVINYLSILSESQUIOXANE WITH 1, 1, 3, 3-TETRAMETHYLDISILOXANE

The hydrosilylation reaction of ladderlike polyvinylsilsesquioxane (Vi-T)with 1, 1, 3, 3-tetramethyldisiloxane (H- MM ) catalyzed by dicyclopentadienyl-dichloroplat-inium (Cp_2PtCl_2) was carried out well in tetrahydrofuran (THF) to produce a soluble whitesolid. This product was characterized by IR, ~1H-NMR, ~(13)C-NMR, ~(29)Si-NMR, DSC, X-raydiffraction method, gel permeation chromatography (GPC), vapour pressure osmometry(VPO), atomic force microscopy (AFM) and molecular simulation. These results provethat the product contains nanoscale tubular structure.     

SYNTHESIS AND CHARACTERIZATION OF A NOVEL REACTIVE OLIGOMERIC LADDERLIKE COPOLYMETHYL-AMINOPROPYL SILSESQUIOXANE

A novel ordered reactive oligomeric ladderlike copolymethyl-aminopropylsilsesquioxane (Me-AP-T), was successfully synthesized by an efficient hydrosilylation graft reaction of 1,1,1-trimethyl-N-2-propenyl-silanamine with a reactive oligomeric |adderlike copolymethyl-hydrosilsesquioxane (Me-H-T), which was prepared by “supramolecular chemistry-dictated stepwise coupling polymerization” process. FT-IR, ^1H- and ^29Si-NMR spectra show that hydrosilylation reaction proceeds completely. Moreover, ^1H-NMR spectra also indicate that both the molar ratios of ≡SiMe group to Si-H and ≡SiMe group to ≡SiPrNH2 are approximately 1:1 respectively based on the ratio of integrated resonance areas of the different groups. XRD analysis and ^29Si-NMR spectra are used for investigating the ladderlike structure of the polymers. A high Tg (128.38℃) of Me-AP-T shown in DSC measurement implies that the ordered reactive Me-AP-T macromolecules have much stiff chains.     

SYNTHESIS OF NEW HIGH MOLECULAR WEIGHT AND REACTIVE LADDERLIKE POLYSILSESQUIOXANES*

Ladderlike polychloropropylsilsesquioxane (CP-T) was first synthesized by "stepwise coupling polymerization".The molecular weight of CP-T is as high as 1.7×10~5. It is a tough, elastic reactive ladderlike polymer and has good heat-resistant and adhesive properties. CP-T can further react with many nucleophilic reagents to generate new ladderlike reactivepolysilsesquioxanes, which can be used as potential precursors in the synthesis of functional ladderlike polymers.     

A novel aryl amide-bridged ladderlike polymethylsiloxane synthesized by an amido H-bonding self-assembled template

A novel soluble aryl amide-bridged ladderlike polymethylsiloxane (A-LPMS) was synthesized by stepwise coupling polymerization on the basis of amido H-bonding self-assembling template from monomer N,N'-bis(3-methyldiethoxylsilylpropyl)-[4,4'-oxybis(benzyl amide)]. The monomer was prepared in a high yield by the hydrosilylation reaction of template agent N,N'-diallyl-[4,4'-oxybis(benzyl amide)] with methyldiethoxysilane in the presence of dicyclopentadienylplatinum dichloride (Cp(2)PtCl(2)) as catalyst. A variety of techniques including (1)H NMR, (13)C NMR, (29)Si NMR, FTIR, XRD, DSC, and, especially, static and dynamic light scattering and viscosimetry were combined to confirm the presence of the ordered ladderlike structure of polymer A-LPMS.     

SYNTHESIS OF HIGH THERMOSTABLE SILICONE GELS CONSTRUCTED WITH LADDERLIKE POLYSILSESQUIOXANES*

Heat-resistant silicone gels were synthesized by replacing the single main chain polymethylhydrosiloxane withreactive ladderlike polyhydrosilsesquioxane copolymers. Because of the interaction between polydimethylsiloxane chainsand the ladderlike polysilsesquioxanes chains, the cyclization of the polydimethylsiloxane chains is hindered. The highthermal stability of the ladderlike polymers can improve the thermal stability of the silicone gels without sacrificing their good comprehensive properties.     

Synthesis and characterization of a novel reactive ladderlike 4,4′‐phenylene ether‐bridged polyvinylsiloxane

A novel soluble, reactive ladderlike 4,4′‐phenylene ether‐bridged polyvinylsiloxane (L) was synthesized successfully for the first time by a stepwise coupling polymerization (SCP) including hydrolysis and polycondensation. The monomer, 4,4′‐bis(vinyldimethoxysilyl)phenylene ether (M), was synthesized by Grignard reaction. The structures of the monomer and the polymer were characterized by infrared spectrometry (IR), nuclear magnetic resonance (¹H NMR, ¹³C NMR, ²⁹Si NMR), mass spectrometry (MS), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), and gel permeation chromatography (GPC). It is proposed from the characterization data that the polymer possesses an ordered ladderlike structure. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2702–2710, 2000     

THE HYDROSILATION REACTION OF LADDERLIKE POLYALLYLSILSESQUIOXANE(ALLYL-T)AND POLYHYDROSILSESQUIOXANE(H-T)

The one plus one (1 + 1) mode of hydrosilation reaction of ladderlike cis-isotatic polyallylsilsesquioxane (Allyl-T)and polyhydrosilsesquioxane (H-T) using dicyclopentadienylplatinumdichloride (Cp_2PtCl_2) as the catalyst leads to theformation of a new polyorganosiloxane (POS). The presence of nanoscale tubular structure in the product POS waspreliminarily proved by IR, ~1H-NMR, differential scanning calorimetry (DSC), X-ray diffraction (XRD), gel permeationchromatography (GPC), atomic force microscopy (AFM) and molecular simulation.     

Design,synthesis and magnetic properties of a ladderlike complex constructed by secondary building units

A secondary building unit (SBU), [Ni(2,2′-bipy)(5-npa)(H₂O)] _n [where 2,2′-bipy = 2,2′-bipyridine, 5-npa = 5-nitroisophthalic dianion], was synthesized as starting material of a polystep reaction. A ladderlike complex (LLC) Ni(II) coordination polymer, {[Ni(2,2′-bipy)(5-npa)(4,4′bipy)_0.5]·(H₂O)} _n , was constructed by polystep reaction using this SBU. In LLC, two SBUs were cross-linked by 4,4′-bipy [where 4,4′-bipy = 4,4′-bipyridine] forming a 1-D ladderlike structure. The magnetic properties of the LLC and SBU are discussed.     

Self‐assembling directed synthesis of a novel terephthalamide‐bridged ladderlike polysiloxane

A novel, soluble terephthalamide‐bridged ladderlike polysiloxane ( L ) was synthesized successfully for the first time by stepwise coupling polymerization. The process involved the hydrogen‐bonding self‐assembly of amido groups, which resulted in the formation of a more highly ordered polymeric structure. A novel monomer, bis(3‐methyldimethoxysilylpropyl) terephthalamide ( M ), was prepared by a hydrosilylation reaction in the presence of dicyclopentadienyl platinum dichloride as a catalyst. The structures of the monomer ( M ) and the polymer ( L ) were characterized by Fourier transform infrared, ¹H NMR, ¹³C NMR, ²⁹Si NMR, mass spectrometry, X‐ray diffraction, differential scanning calorimetry, and vapor pressure osmometry. All the characterization data indicated that the synthesized polymer ( L ) possessed an ordered ladderlike structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3161–3170, 2002     

3-氨基-4-氧代氰基呋咱捕获与表征

3,4-双(4-氨基呋咱-3-基)氧化呋咱由活性中间体3-氨基-4-氧代氰基呋咱分子间发生二聚获得,但3-氨基-4-氧代氰基呋咱不稳定,无法通过分离、纯化及光谱鉴定证实其存在.采用4种不同的烯烃与3-氨基-4-氧代氰基呋咱发生1,3-偶极环加成反应得到3-(4-氨基呋咱-3-基)-5-氰基-Δ2-异噁唑啉、3-(4-氨基呋咱-3-基)-5-乙酰氧基-Δ2-异噁唑啉、3-(4-氨基呋咱-3-基)-5-正丁基-Δ2-异噁唑啉及3-(4-氨基呋咱-3-基)-环己烷并-Δ2-异噁唑啉4种Δ2-异噁唑啉衍生物;采用苯甲酰氯为捕获剂,与3-氨基-4-氧代氰基呋咱反应获得了3-氨基-4-(N-苯甲酸基氨基羰基)呋咱化合物;通过红外光谱、核磁共振光谱、质谱、元素分析表征了5种新化合物的结构,提供了活性中间体3-氨基-4-氧代氰基呋咱存在的间接证据.     

SYNTHESIS AND MESOMORPHIC PROPERTIES OF FISHBONE-LIKE LIQUID CRYSTALLINE POLYSILSESQUIOXANES——Ⅰ. FISHBONE-LIKE, β-DIKETONE-BASED LIQUID CRYSTALLINE POLYSILSESQUIOXANES AND THEIR COPPER COMPLEXES*

Two kinds of fishbone-like, β-diketone-based liquid crystalline polysilsesquioxanes(FBDKLCP'S), homopolymeric (H-FBDKLCP) and copolymeric (C-FBDKaLCP) have been first synthesized via the hydrosilylation reaction of a vinyl-terminated β-diketone with the homopolymeric ladderlike polyhydrosilsesquioxane (LPHSQ) and random copolymethylhydrosilsesquioxane (LRPMHSQ) respectively. These new kinds of FBDKLCP with M of 10~4 is thermotroic liquid crystalline polymer and its clearing temperatures T_i's and mesophase range △T's are much higher than those of the corresponding comb-like β-diketone liquid crystalline polysiloxane (DKLCP) by about 200℃. Similar results have been observed with the comparison of the two different structure Cu-coordinating compounds The significant increases in T_((?))'s and △T's of the FBDKLCP and Cu-FBDKLCP are mainly attributed to the great rigidity of the ladderlike polysilsesquioxane backbone.     

Transformation from a low-dimensional framework to a high-dimensional architecture based on different metal ions: syntheses, structures, and photoluminescences

Five novel metal pamidronates (3-ammonium-1-hydroxypropylidene-1,1-bisphosphonate, APD) formulated as Ni2(C3NH10P2O7)4.4H2O (1), M(C3NH9P2O7).H2O (M = Co (2), Mn (3), Zn (4)) and Cu3(C3NH8P2O7)2.2H2O (5) have been hydrothermally synthesized under similar conditions. Compound 1 is a molecular binuclear nickel cluster. Compounds 2 and 3 exhibit similar one-dimensional ladderlike structures. Compound 4 possesses a novel two-dimensional gridlike framework. Compound 5 shows an unusual three-dimensional architecture, in which two-dimensional layers with a parquet motif are pillared by {CuO4} planar squares. Different dinuclear secondary building units (SBUs) are observed in compounds 1-5, depending on the different coordination modes of APD. They also exhibit different photoluminescence properties.     

Solid-state aggregation of metallacyclophane-based Mn(II)Cu(II) one-dimensional ladders

Two distinct one-dimensional (1) and two-dimensional (2) mixed-metal-organic polymers have been synthesized by using the "complex-as-ligand" strategy. The structure of 1 consists of isolated ladderlike Mn(II)(2)Cu(II)(2) chains separated from each other by neutral Mn(II)(2) dimers, whereas 2 possesses an overall corrugated layer structure built from additional coordinative interactions between adjacent Mn(II)(2)Cu(II)(2) ladders. Interestingly, 1 and 2 show overall ferri- and antiferromagnetic behavior, respectively, as a result of their distinct crystalline aggregation in the solid state.     

Anion-dependent self-assembly of silver(I) and diaminotriazines to coordination polymers: non-covalent bonds and role interchange between silver and hydrogen bonds

New coordination polymers have been obtained by the self-assembly of silver salts AgX (X = BF 4, PF 6, CF 3SO 3) and 2,4-diamino-6-R-1,3,5-triazines L (R = phenyl and p-tolyl) of formulas AgLX ( 1- 6). A complex of different stoichiometry, [Ag 3L 2(H 2O)(acetone) 2](BF 4) 3, 7 (R = phenyl), has also been synthesized. The three-dimensional structures of five compounds have been determined by X-ray diffraction studies. For the AgLX complexes, when X = BF 4 and R = phenyl or p-tolyl, chiral chains with alternating Ag and L are formed. The chains are cross-linked by the counteranions in a three-dimensional fashion through hydrogen bonds and weak Ag...F interactions giving rise to a structure with solvent-filled channels. Different and more compact structures have been found when the counteranion is CF 3SO 3 (OTf). When R = phenyl, sheets are formed which consist of [Ag 2(OTf) 2L 2] units with double triflate bridges and which contain columns of pi-pi stacked arenes. Hydrogen bonds connect the sheets. When AgOTf is used and R is p-tolyl, a different and unusual ladderlike structure is obtained in which the rungs are double asymmetric bridges consisting of the triflate groups bonded to Ag in kappa (2) O,mu 2- O and kappa (1) O,mu 2- O fashion. The ladders are parallel to each other and are mutually linked by N-H...N hydrogen bonds to give a 3D architecture. A very similar ladderlike structure has been found for 7 but with a water molecule and a BF 4 (-) group acting as bridges. The role played by the hydrogen bonds in complex 6 to form the 3-D structure is played in 7 by [Ag(acetone) 2] fragments. The noncovalent interactions play an important role in the different solid-state 3D structures. The behavior of the new derivatives in solution has also been analyzed. A new species has been detected at low temperatures, and this exhibits restricted rotation of the phenyl ring.