处理方法对多壁碳纳米管结构及负载Ru催化剂氨分解反应活性的影响

分别用H_2O_2、强碱(NaOH、 KOH)和强酸HNO_3处理CNTs.以处理后的CNTs为载体、通过浸渍RuCl_3水溶液结合高温H_2还原制备Ru/CNTs催化剂,并将其应用在氨分解催化反应中.利用XRD、 TPR、 TPD-MS表征手段研究了Ru在CNTs表面的分散、还原性能及CNTs表面化学基团,探究催化剂结构-性能间构效关系.结果表明,强碱及双氧水处理CNTs,为其表面引入了数量适宜的羧基、酸酐、酚等官能团,而传统硝酸处理则引入了大量的羧基、酸酐、酯、内酯、酚、醌和羰基等官能团,对CNTs本征结构性质影响很大.经强碱及双氧水处理CNTs上负载Ru后所得催化剂的效果明显优于传统硝酸处理CNTs上负载Ru催化剂.我们发展的CNTs的新型处理方法为研制高活性Ru/CNTs催化分解氨催化剂提供了新的思路.     

Ru/CNFs 催化剂催化氨分解制氢

 研究了鱼骨式碳纤维 (CNFs) 和管式碳纤维 (CNTs) 负载 Ru 催化剂的氨分解反应活性. 结果表明, Ru/CNFs 催化剂上氨分解活性高于 Ru/CNTs 催化剂. 通过改变 Ru 负载量或载体表面的含氧基团来调节 Ru 的粒径. Ru 的活性位随着 Ru 颗粒尺寸的增大而增加. CNFs 上的含氧基团对 Ru 颗粒的氨分解活性影响很大. 在相同粒径的 Ru 颗粒上, CNFs 表面的含氧基团增加了 Ru 的活性.     

硝酸水热处理活性炭对其负载的Ba-Ru-K氨合成催化剂性能的影响

采用N2物理吸附、Boehm滴定、He-TPD-MS、CO化学吸附和透射电镜等手段考察了硝酸水热处理对活性炭(AC)及其负载的Ru基催化剂的孔结构、表面含氧基团、Ru分散度的影响,并评价了Ba-Ru-K/AC催化剂氨合成反应性能.结果表明,经硝酸水热处理后,AC表面含氧基团明显增多,但其孔结构变化不大.随着水热处理硝酸浓度的增加,AC表面含氧基团的数量增加,而相应催化剂的Ru分散度有所降低,Ru粒子尺寸增大.当硝酸浓度为2.0mol/L时,Ru分散度较高,且粒子尺寸(2.0nm)适宜,分散均匀,因此催化剂活性较高.在10MPa和10000h1条件下,400和375oC时,出口氨浓度分别达到17.80%和11.10%,较4.6mol/L硝酸回流处理AC负载的Ru基催化剂分别提高了16.8%和21.3%.水热处理AC的适宜条件为硝酸浓度2.0mol/L,150oC处理4h,填充度为70%.因此,通过调节水热处理时所用硝酸浓度可有效调控AC表面含氧基团的数量及其负载Ru的粒子尺寸.     

快速功能化碳纳米管载 Pt 催化剂的醇氧化性能(英文)

采用HF刻蚀及交替微波加H2O2相结合的方法进行快速功能化碳纳米管(CNTs),应用红外光谱、拉曼光谱和透射电镜等方法详细考察了CNTs及其载Pt催化剂的物化性质,并采用循环伏安法、线性电流扫描法和计时电流法考察了所得催化剂的电化学性能.结果表明,CNTs经过HF刻蚀和交替微波H2O2双重处理后更适合用作催化剂载体,以10s-on/20s-off加热5次所得CNTs载Pt催化剂显示出最佳的催化性能.这可归因于处理后的CNTs表面含有丰富的微孔及含氧官能团,能有效增强Pt颗粒及CNTs间的相互作用.     

La-CoMoN_x/CNTs催化剂上氨分解反应的本征动力学

以La-CoMoNx/CNTs为催化剂,对氨分解制氢反应的本征动力学进行了研究。考察了N2浓度、H2浓度、NH3浓度以及反应温度对反应速率的影响。采用幂指数方程描述反应动力学,确定了本征动力学参数,推导出了本征动力学方程,得到反应的活化能为93.948 kJ/mol。同时对其反应机理进行了探讨,认为La-CoMoNx/CNTs催化剂上氨分解反应遵循Temkin-Pyzhev机理,即表面氮原子的结合脱附为反应的速率控制步骤。     

碱土金属对锆基钙钛矿材料负载钌催化剂氨合成性能的影响

采用柠檬酸络合法制备了含Ca,Sr和Ba的锆基钙钛矿材料,负载Ru后用于催化氨合成反应;研究了碱土金属对催化剂织构性能和载体材料表面碱性的影响,并与催化剂活性相关联.同时,采用程序升温脱附技术对催化剂表面H2脱附性能进行了表征.结果显示,碱土金属对催化剂活性的促进顺序为Ba>Sr>Ca.研究发现,不同锆基碱土金属钙钛矿材料表面均具有较强的碱性位,碱土金属的加入影响了载体碱性强度以及金属-载体的相互作用,其中BaZrO3可有效抑制H2的吸附.因此,Ru/BaZrO3催化剂表现出优异的氨合成活性.     

Ru/Ba-ZrO2催化剂的制备及其氨合成性能研究

分别采用柠檬酸络合法、改性共沉淀法和湿浸渍法制备了掺Ba纳米ZrO2材料,负载Ru后用于催化氨合成反应.采用X射线衍射、CO2程序升温脱附(CO2-TPD)、N2物理低温吸附、H2程序升温还原技术(H2-TPR)、扫描电镜(SEM)、透射电镜(TEM)、X射线光电子能谱(XPS)和CO化学吸附对载体材料和催化剂进行了表征.结果表明,不同方法制备载体的物相结构和织构性能均有明显差别,负载Ru后催化剂的氨合成性能差别也较大.其中,以柠檬酸络合法制备的载体材料中Ba以BaZrO3的形式存在,钙钛矿型BaZrO3具有较强的供电子能力,电子可以通过Ru与载体间强相互作用传递到Ru表面,有效地促进N≡N的断裂,使催化剂的低温活性显著提高.在425℃,3 MPa,空速为10000 h-1条件下,出口氨浓度为5.72%.其氨合成活性分别是改性共沉淀法和湿浸渍法制备催化剂的3.8倍和14.3倍.     

稀土掺杂对纳米钡-氧化镁载体及其负载钌基氨合成催化剂性能的影响

利用超声-共沉淀技术制备了一系列稀土与钡共掺杂的纳米氧化镁载体(RE-Ba-MgO,RE=La,Sm和Ce)及其负载的钌基氨合成催化剂(Ru/RE-Ba-MgO).通过氮气物理吸附、X98射线衍射、场发射扫描电镜、热重分析仪及H2程序升温还原等方法对载体和催化荆进行了表征.结果表明,Ba在载体中的掺杂形式分为低温分解型BaCO3和高温分解型BaCO3.稀士的掺杂可明显改变载体的表面形态及表面结构,使载体化学与结构性能发生变化,从而导致低温分解型BaCO3的相对含量发生变化,进而改变催化剂的低温活性.在10 MPa,400℃,10 000 h-1的测试条件下,Ru/La-Ba-MgO催化剂的出口氨浓度达到65.49mmol/(g·h),比Ru/Ba-MgO催化剂活性提高了66.3%.     

氧化镁载体和氧化钡助剂对钌基氨合成催化剂结构和性能的影响

采用不同来源氧化镁(市售MgO-1,合成MgO-2)作为钌基氨合成催化剂载体,浸渍法制备了添加不同BaO助剂含量的Ba-Ru/MgO催化剂,通过X射线衍射(XRD)、热重-量热扫描分析(TG/DSC)、N2-低温物理吸附、透射电镜(TEM)、H2程序升温还原(H2-TPR)和CO2程序升温脱附(CO2-TPD)等手段对其进行了表征,考察了不同来源的MgO和BaO助剂含量对负载型钌基氨合成催化剂的物相结构、织构性质、微观形貌、Ru物种的还原性质和体系酸碱性质以及催化剂的氨合成活性等方面的影响。结果表明,MgO的理化性质对所制备的钌基氨合成催化剂的结构以及氨合成活性有较大影响。MgO-2比表面较大,总碱性位数量较多,负载在其表面的Ru粒子粒径在2 nm左右,nBa∶nRu为1.0时,Ba-Ru(1∶1)/MgO-2催化剂表面的Ru物种易于还原,表面存在的弱碱性位极大地促进了氨合成活性,在400°C时活性达到15.40 L.g-1Ru.h-1(3.0 MPa,5 000 h-1),在相同反应条件下比Ba-Ru/MgO-1催化剂活性更高。     

催化剂对东都风化煤硝酸氧解及其产物特性的影响

对东都风化煤进行硝酸氧解，利用元素分析与红外光谱分析研究产物硝基腐植酸（NHA）的结构和性质，讨论硝酸氧解中催化剂对硝基腐植酸的产率、元素组成和官能团的影响。结果表明，浓硫酸、过氧化氢、碳纳米管负载过渡金属和固体酸催化剂都能显著提高煤氧解NHA的产率，产物C、H的质量分数和H/C原子比降低，氮的质量分数增加，E4/E6增加。固体酸与浓硫酸对提高产物氮的质量分数更明显，镀镍碳纳米管（CNTs）负载三氧化二铁、碳纳米管负载镍和浓硫酸作为催化剂得到腐植酸分子更小。催化剂存在下产物活性官能团增加更多，不同催化剂对产物有不同的影响。     

Influence of surface functionalization via chemical oxidation on the properties of carbon nanotubes

The surface of carbon nanotubes (CNTs) was functionalized in different chemical oxidants, hydrogen peroxide, mixed concentrated HNO(3)/H(2)SO(4) and acidic KMnO(4) solution. The influences on the properties of CNTs were systematically investigated, such as the structure, the kinds and the contents of the formed surface oxygen-containing functional groups, the pH(PZC) values and the surface hydrophilicity using XRD, HREM, FTIR and chemical titration. The results show that the kinds and the contents of the surface oxygen-containing groups are dependent on the functionalization methods. The formation of the oxygen-containing groups can decrease pH(PZC) values and improve surface hydrophilicity of CNTs. The dispersion of the supported Pd-Pt particles on the functionalized CNTs and their catalytic activity in the profile reaction of naphthalene hydrogenation to tetralin are both promoted due to the presence of these oxygen-containing groups.     

Chemical properties of the surface of nanofibrous carbonaceous materials produced by catalytic methane decomposition

The chemical behavior of nanofibrous carbonaceous materials prepared by the catalytic decomposition of methane was studied by IR spectroscopy, X-ray photoelectron spectroscopy, and titration. Initial carbon was shown to be virtually devoid of functional groups on its surface. Treatment of carbonaceous samples with alkali, ammonia, or nitric acid modified the surface of carbon and increased the number of functional groups.     

液相还原Ru/CNTs催化氨分解性能研究

近年来各国对环境保护日益关注,为了减少甚至消除汽车、小型发电站等带来的污染,供给质子膜燃料电池(PEMFC)的现场制氢技术的研究受到关注.     

Fe2O3/CNT催化湿法H2O2氧化苯酚

通过化学沉积法和热处理得到多壁碳纳米管负载Fe2O3催化剂 Fe2O3/CNT, Fe2O3的负载质量分数约为15.1%,XRD表征显示,负载的Fe2O3存在α和γ这2种晶型。考察了Fe2O3/CNT催化湿式H2O2氧化去除废水中苯酚催化性能,通过苯酚的去除率及反应过程中催化剂活性组分的溶出总量,研究了催化剂制备过程中添加聚乙烯醇对催化剂性能的影响。在苯酚和H2O2初始浓度分别为350和1 500 mg/L、催化剂投加量为1.0 g/L、温度80 ℃条件下,经过240 min的反应,苯酚去除率达100％,COD去除率为86.1％。     

杂原子修饰的碳纳米管对高级氧化过程的催化性能(英文)

Multi-walled carbon nanotubes (CNTs) were submitted to chemical and thermal treatments in order to incorporate different heteroatoms on the surface. O-, S- and N-containing groups were successfully introduced onto the CNTs without significant changes of the textural properties. The cata-lytic activity of these heteroatom-modified CNTs was studied in two liquid phase oxidation processes: catalytic ozonation and catalytic wet air oxidation (CWAO), using oxalic acid and phenol as model compounds. In both cases, the presence of strongly acidic O-containing groups was found to decrease the catalytic activity of the CNTs. On the other hand, the introduction of S species (mainly sulfonic acids) enhanced the removal rate of the model compounds, particularly in the CWAO of phenol. Additional experiments were performed with a radical scavenger and sodium persulfate, in order to clarify the reaction mechanism. Nitrogen functionalities improve the catalytic performance of the original CNTs, regardless of the process or of the pollutant.     

酸处理活性炭催化水合肼还原硝基苯(英文)

以水合肼为还原剂,采用硝酸、盐酸、硫酸及氮气或氢气氛处理的活性炭为催化剂,考察了其催化硝基苯还原反应性能.结果表明,经化学处理后,活性炭表面形成了各种含氧官能团,它们可引发水合肼分解,并影响硝基苯的吸附.活性炭表面形成的含氧官能团越多,其催化硝基苯还原速率越快.其中经盐酸处理的活性炭表面形成的含氧官能团最多,因而表现出最高的硝基苯还原活性.     

Direct Synthesis of Phenol from Benzene on an Activated Carbon Catalyst Treated with Nitric Acid

Commercially available coal-based activated carbon was treated by nitric acid with different concentrations and the resultant samples were used as catalysts for the direct hydroxylation of benzene to phenol in acetonitrile. Boehm titration, X-ray photoelectron spectroscopy, scanning electron microscope coupled with an energy dispersive X-ray microanalyzer, and Brunauer-Emmett-Teller method were used to characterize the samples. The number of carboxyl groups on the surface was found to be the main factor affecting the catalytic activity. An optimum catalytic performance with a yield of 15.7% and a selectivity of 87.2% to phenol was obtained.     

Understanding the oxygen-containing functional groups on multiwall carbon nanotubes toward supercapacitors

Typical functionalization treatment by strong acid is used to introduce functional groups into/onto the multiwall carbon nanotubes (MWCNTs), to enhance the desired redox activity for electrochemical applications. The influence of various functional groups on the redox of MWCNT has been studied in recent years. Different functional groups on MWCNT can be removed selectively using different thermal annealing temperatures. By this method, it is recognized that carboxyl, anhydride, and phenol groups play essential roles in the redox reaction. A designed carboxyl/anhydride-rich defective MWCNT is fabricated with a superior specific areal capacitance of 34.55 mF/cm². These results provide more information for the study of the MWCNTs' electrochemical applications toward supercapacitors and batteries.     

Barothermal modification of activated carbon with maleic anhydride

We have used the barothermal treatment method (heat and pressure) to modify the surface of activated charcoal with maleic anhydride. As a result of the modification, about 1 mmol/g of thermally stable carboxyl groups are formed on the surface with a decomposition temperature range of 330–470°C. We show that the proposed procedure makes it possible to obtain materials with a uniform coverage of functional groups.