Additive manufacturing approaches for biological power generation

As the consequences of global warming continue to affect the climate, there is an increased need for technologies that decrease dependence on fossil fuel consumption and promote sustainability. Additive manufacturing (AM) not only enables the scale-up and mass production of renewable energy technologies but also reduces cost and lead time, minimizes waste, and uses less energy than traditional manufacturing processes. Moreover, AM brings design and innovation to the forefront by allowing for design strategy revision and rapid prototyping. Herein, AM approaches used to fabricate devices that enable biological power generation are described. Biological power generation is a process through which biocatalysts – electroactive bacteria, enzymes, or cyanobacteria – harvest electrons from chemical substrates or light. Device engineering directs electron transfer events to a conductive material and maximizes power output. This review covers recent AM approaches for biological power generation in the form of microbial fuel cells (MFCs), enzymatic fuel cells, and biophotovoltaic cells with an emphasis on MFCs. Fabrication methods and materials for electrodes, chambers, inserts, membranes, and biofilms are described, along with impacts on device performance.     

石墨烯基杂化材料在微生物燃料电池电极中的应用

微生物燃料电池（MFC）是利用生物催化剂将污水有机物中的化学能直接转化为电能的技术,因其功率密度和能量转化效率低,电极制作成本高,限制了其大规模实际应用。因此如何提高电极的催化性能并降低电极制作成本成为MFC的研究重点方向。由于石墨烯基杂化材料具有良好的导电性和催化特性,因此石墨烯基杂化材料成为在MFC电极应用中的热点之一。本文综述了近年来MFC石墨烯基杂化电极材料的最新研究进展,重点讨论了改性石墨烯电极、金属及非金属/石墨烯杂化电极、金属氧化物/石墨烯杂化电极、聚合物/石墨烯杂化电极和石墨烯凝胶电极的设计思路和制备方法及其催化性能,着重分析了石墨烯基阳极和阴极杂化材料对MFC产电性能的影响。最后对石墨烯基杂化材料在MFC应用中存在的问题及研究前景进行了总结和展望。     

Bioenergetics and extracellular electron transfer in microbial fuel cells and microbial corrosion

Bioenergetics can be used to analyze the theoretical voltage output of a microbial fuel cell (MFC) and the thermodynamic driving force in microbiologically influenced corrosion (MIC). MFCs involve both inward and outward extracellular electron transfer (EET), whereas only inward EET is behind EET–MIC caused by an electroactive biofilm's harvest of energy from a metal. EET is often rate-limiting, and it is an important process in microbial energy metabolism. EET is critical to the understanding of MFCs and EET–MIC bioelectrochemical processes. Many advances have been made in the past decade on EET by MFC and MIC researchers. Gene manipulations have been used to improve EET in MFCs, leading to enhanced energy output. They have also been used to elucidate the EET processes for better understanding of EET–MIC, which aids in MIC analysis and decision-making of biocide treatment and its efficacy assessment. Researchers are starting to integrate EET knowledge from both fields.     

Anodic electron transfer mechanisms in microbial fuel cells and their energy efficiency

The performance of a microbial fuel cell (MFC) depends on a complex system of parameters. Apart from technical variables like the anode or fuel cell design, it is mainly the paths and mechanisms of the bioelectrochemical energy conversion that decisively determine the MFC power and energy output. Here, the electron transfer from the microbial cell to the fuel cell anode, as a process that links microbiology and electrochemistry, represents a key factor that defines the theoretical limits of the energy conversion. The determination of the energy efficiency of the electron transfer reactions, based on the biological standard potentials of the involved redox species in combination with the known paths (and stoichiometry) of the underlying microbial metabolism, is an important instrument for this discussion. Against the sometimes confusing classifications of MFCs in literature it is demonstrated that the anodic electron transfer is always based on one and the same background: the exploitation of the necessity of every living cell to dispose the electrons liberated during oxidative substrate degradation.     

Poly(terthiophene)s from copolymer precursors via solid‐state oxidative conversion

Herein, we report the synthesis of conducting poly (terthiophene)s using a side chain precursor polymer approach. Random copolymers were prepared by ring opening metathesis polymerization of two norbornylene monomers, one containing a pendant terthiophene group and the other containing a pendant acetate group. Solid‐state oxidative conversion of the terthiophene units was used to produce conductive polymers. Oxidative solid‐state conversion was successful for copolymers containing as little as 1 mol % of terthiophene comonomer. The electrical and optical properties of CPs were studied as a function of the amount of electroactive moiety, terthiophene (3T), present in the copolymer. The CPs were found to have conductivity varying between 10^?1 and 10^?4 S/cm depending on the precursor copolymer compositions. The CPs obtained from all precursors had no significant difference in their energy gaps and showed blue to orange color transitions when switching from the oxidized to the neutral states, respectively. The absorbance intensity at 426 nm for poly(3T) from the precursors fits the Beer–Lambert law corresponding to the range of initial 3T content in the precursor copolymer composition (from 1 to 100 mol %). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 756–763, 2010     

High‐strength electrically conductive fibers: Functionalization of polyamide,aramid, and polyester fibers with PEDOT polymer

In this work, high‐performance fibers such as aramid (Twaron), polyamide (PA6), polyester (PET), and hybrid Twaron/PA6 fibers were transformed into electroactive fibers by coating them with conjugated polymer, poly(3,4‐ethylenedioxythiophene) (PEDOT) through vapor phase polymerization (VPP) method. The VPP is considered as an efficient technique for depositing CPs on different substrates regardless of their lower solubility in various solvents. In this paper, PEDOT‐coated high‐performance fibers were prepared under already optimized reaction conditions, and then a comparison between electrical, thermal, and mechanical properties of different fibers, before and after coating, was made. The obtained coated fibers were characterized through scanning electron microscope (SEM), thermogravimetric analysis (TGA), 2‐probe electrical resistance measurement method, and tensile testing. It was revealed that at particular reaction conditions, all high performance textile substrates were successfully converted into electroactive fibers. The voltage‐current (V‐I) characteristics showed that PEDOT‐coated polyester fibers exhibited highest conductivity value among all other substrate fibers. The active PEDOT layers on high performance fibers could behave as an antistatic coating to minimize the risks associated with static charges at work places. Also, the obtained fibers have potential to be used as smart materials for various medical, sports, and military applications.     

Electroactive Composite of FeCl3‐Doped P3HT/PLGA with Adjustable Electrical Conductivity for Potential Application in Neural Tissue Engineering

Conducting polymers (CPs) is one of intelligent biomaterials with the specific properties of reversible redox states, which have a significant effects on the cell behaviors and nerve tissue regeneration. However, the effects of CPs with different electrical conductivity on the behaviors of nerve cells are rarely reported. Therefore, a kind of Poly(3‐hexylthiophene) (P3HT) with certain molecular weight is synthesized by Kumada catalyst transfer polymerization (KCTP) method and employed to prepare bioabsorbable and electroactive intelligent composites of Poly(3‐hexylthiophene)/Poly(glycolide‐lactide) (P3HT/PLGA). FeCl₃ doping electroactive membranes with different electrical conductivities are prepared to investigate the cell behaviors. On the substrate with higher electrical conductivity, the proliferation of rat adrenal pheochromocytoma cells (PC12 cells) is significantly promoted and neurite length is increased obviously. In particular, the most significant improvements are the neuron gene expression of Synapsin 1 and microtubule‐associated protein 2 (MAP2) by the composites with high conductivity. These results suggest that P3HT/PLGA with suitable electrical conductivity have a positive role in promoting neural growth and differentiation, which is promising for advancing potential application of nerve repair and regeneration.     

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.     

微生物燃料电池电极材料研究进展

微生物燃料电池以微生物为催化剂将化学能直接转化成电能,可用于废水处理并产生电能,是一种极具应用前景的生物电化学技术. 本文综述了近年来微生物燃料电池电极材料的制备、功能修饰及表面构建等的研究进展,着重介绍了炭基纳米材料的微结构与成分对微生物燃料电池性能的影响,并分析了微生物燃料电池电极材料现存的主要问题,以期不久的将来微生物燃料电池能付之实用.     

Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs’ performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m^?2.     

Electroactive shape memory cyanate/polybutadiene epoxy composites filled with carbon black

Electroactive shape memory composites were synthesized using polybutadiene epoxy(PBEP) and bisphenol A type cyanate ester(BACE) filled with different contents of carbon black(CB). Dynamic mechanical analysis(DMA), scanning electron microscopy(SEM), electrical performance and electroactive shape memory behavior were systematically investigated. It is found that the volume resistivity decreased due to excellent electrical conductivity of CB, in turn resulting in good electroactive shape memory properties. The content of CB and applied voltage had significant influence on electroactive shape memory effect of developed BACE/PBEP/CB composites. Shape recovery can be observed within a few seconds with the CB content of 5 wt% and voltage of 60 V. Shape recovery time decreased with increasing content of CB and voltage. The infrared thermometer revealed that the temperature rises above the glass transition temperature faster with the increase of voltage and the decrease of resistance.     

Recent Advances in Electropolymerized Conducting Polymers in Amperometric Biosensors

Conducting electroactive polymers (CPs) are materials discovered just over 20 years ago which have aroused considerable interest on account of their electronic conducting properties and unique chemical and biochemical properties. Consequently, they have numerous (bio)analytical and technological applications. CPs are easily synthesized and deposited onto the conductive surface of a given substrate from monomer solutions by electrochemical polymerization with precise electrochemical control of their formation rate and thickness. Coating electrodes with CPs under mild conditions opens up enormous possibilities for the immobilization of biomolecules and bioaffinity or biorecognizing reagents, the improvement of their electrocatalytic properties, rapid electron transfer and direct communication to produce a range of analytical signals and new analytical applications. Co-immobilization of other molecules (enzymatic co-factors or charge-transfer mediators) by entrapment within electropolymerized films or by covalent binding on these films permits straightforward fabrication of reagentless biosensors. The characteristics of CPs and their uses, mainly in amperometric biosensors, are reviewed. The most recent applications and lines of research related to CP films are summarized in the different sections of the paper, and probable future trends are discussed.     

High‐efficiency Nitric Acid‐PPy/AQDS Coupling Treated Bioanodes Based Microbial Fuel Cell

The properties of anode material are crucial for high performances in microbial fuel cells (MFCs). Herein, we report a biocompatible, conductive, and electron transfer efficient cooperative processing anode, which is fabricated by electrodepositing polypyrrole/anthraquinone‐2, 6‐disulphonic disodium salt (PPy/AQDS) onto nitric acid‐soaked carbon felt. Results showed that the cooperative processing anode outperformed the pristine one in biomass, electrical conductivity, and exchange current density with better performance between 2.4 and 3.3 times. The maximum power density (1060.3 mW m⁻²) of the MFC equipped with the properties hybridized anode delivered a 2.2‐fold increase over that of the control and thus has great potential to be used as an anode for high‐power MFC. Further investigation revealed that the contributions of biocompatibility (BCB), electrical conductivity (EC), and electron transfer efficiency (ETE) to the performance of carbon felt anodes appeared as cumulative effect rather than summing effect. We propose combined treatment of BCB with EC and ETE to form a properties‐hybridized anode based on thoroughly analyzing the feasibility and effectiveness, and discussed future efforts to be made for realizing more extraordinary high‐performance cooperative processing anodes. This work may also provide a novel approach for the development of other types of anode for high‐performance MFC through combined treating the BCB with EC and ETE simultaneously.     

Enhanced power production of microbial fuel cells by reducing the oxygen and nitrogen functional groups of carbon cloth anode

The physicochemical properties of anode material are important for the electron transfer of anode bacteria and electricity generation of microbial fuel cells (MFCs). In this work, carbon cloth anode was pretreated with isopropanol, hydrogen peroxide (H₂O₂) and sodium hypochlorite (NaOCl) in order to reduce the anode functional groups. The influence of functional groups on the electrochemical properties of carbon cloth anode and power generation of MFCs was investigated. The anode pretreatments removed the surface sizing layer of carbon cloth and substantially reduced the contents of C‐O and pyridinic/pyrrolic N groups on the anode. Electrochemical impedance spectroscopy and cyclic voltammetry analyses of the biofilm‐matured anodes revealed an enhanced electrochemical electron transfer property because of the anode pretreatments. As compared with the untreated control (612 ± 6 mW m^?2), the maximum power density of an acetate‐fed single‐chamber MFC was increased by 26% (773 ± 5 mW m^?2) with the isopropanol treated anode. Additional treatment with H₂O₂ and NaOCl further increased the maximum power output to 844 ± 5 mW m^?2 and 831 ± 4 mWm^?2. A nearly inverse liner relationship was observed between the contents of C‐O and pyridinic/pyrrolic N groups on anodes and the anodic exchange current density and the power output of MFCs, indicating an adverse effect of these functional groups on the electricity production of anodes. Results from this study will further our understanding on the microbial interaction with carbon‐based electrodes and provide an important guidance for the modification of anode materials for MFCs in future studies. Copyright © 2016 John Wiley & Sons, Ltd.     

Progress and Prospects on the Fabrication of Graphene-Based Nanostructures for Energy Storage,Energy Conversion and Biomedical Applications

Graphene, a two-dimensional (2D) layered material has attracted much attention from the scientific community due to its exceptional electrical, thermal, mechanical, biological and optical properties. Hence, numerous applications utilizing graphene-based materials could be conceived in next-generation electronics, chemical and biological sensing, energy conversion and storage, and beyond. The interaction between graphene surfaces with other materials plays a vital role in influencing its properties than other bulk materials. In this review, we outline the recent progress in the production of graphene and related 2D materials, and their uses in energy conversion (solar cells, fuel cells), energy storage (batteries, supercapacitors) and biomedical applications.     

电极面积对老龄垃圾渗滤液为底物的微生物燃料电池性能影响

构建生物阴极型双室微生物燃料电池,处理老龄垃圾渗滤液。研究了阳极与阴极面积比值对微生物燃料电池产电能力和对老龄垃圾渗滤液处理效果的影响。结果表明,阳极与阴极面积比为1:2、2:2、2:1的3组生物阴极型微生物燃料电池输出电压分别为408、452、396mV,最大电功率密度分别为145.73、237.65、136.50mW/m³,内阻分别为350、200、400Ω,COD的去除率分别为21.18%、20.20%、22.31%。3组微生物燃料电池运行30d后,垃圾渗滤液中氨氮、硝酸盐氮、亚硝酸盐氮浓度均下降,其中,氨氮去除率分别为80.88%、73.61%和66.17%,其去除效果与产电性能相关。     

电活性和生物活性多巴-胰岛素样生长因子-1@聚(乙交酯-丙交酯)/聚(3-己基噻吩)静电纺丝纤维的制备及神经组织工程应用

理想型神经修复材料应具备与正常神经相似的导电性、仿生细胞外基质结构以及释放特定的生长因子等性能。 本研究将不同质量分数(0、3%、5%、10%)的聚(3-己基噻吩)(P3HT)加入到聚(乙交酯-丙交酯)(PLGA)中,采用静电纺丝工艺,制备了具有电活性和仿生结构的复合纤维。 利用酪氨酸羟化酶,将不同质量浓度(10、50、100 ng/mL)的含多巴接头的胰岛素样生长因子-1(DOPA-IGF-1)绑定在纤维表面,实现生长因子长效稳定的作用。 通过扫描电子显微镜、接触角表征了纤维直径、分布以及表面亲疏水性。 利用细胞培养、荧光染色实验评估了纤维在体外的生物相容性和生物活性。 结果表明,该电活性纤维能有效促进大鼠肾上腺嗜铬细胞瘤细胞(PC12)增殖,其中,PLGA/P3HT-5%纤维表现出更好的细胞响应性。 结合DOPA-IGF-1质量浓度为10 ng/mL的纤维更利于PC12细胞的黏附、生长。 兼具电活性和生物活性的纳米纤维DOPA-IGF-1@PLGA/P3HT在神经组织修复领域具有潜在的应用价值。     

Green Synthesis of Silver Nanoparticles Using Extract of Cilembu Sweet Potatoes (Ipomoea batatas L var. Rancing) as Potential Filler for 3D Printed Electroactive and Anti-Infection Scaffolds

Electroactive biomaterials are fascinating for tissue engineering applications because of their ability to deliver electrical stimulation directly to cells, tissue, and organs. One particularly attractive conductive filler for electroactive biomaterials is silver nanoparticles (AgNPs) because of their high conductivity, antibacterial activity, and ability to promote bone healing. However, production of AgNPs involves a toxic reducing agent which would inhibit biological scaffold performance. This work explores facile and green synthesis of AgNPs using extract of Cilembu sweet potato and studies the effect of baking and precursor concentrations (1, 10 and 100 mM) on AgNPs’ properties. Transmission electron microscope (TEM) results revealed that the smallest particle size of AgNPs (9.95 ± 3.69 nm) with nodular morphology was obtained by utilization of baked extract and ten mM AgNO₃. Polycaprolactone (PCL)/AgNPs scaffolds exhibited several enhancements compared to PCL scaffolds. Compressive strength was six times greater (3.88 ± 0.42 MPa), more hydrophilic (contact angle of 76.8 ± 1.7°), conductive (2.3 ± 0.5 × 10⁻³ S/cm) and exhibited anti-bacterial properties against Staphylococcus aureus ATCC3658 (99.5% reduction of surviving bacteria). Despite the promising results, further investigation on biological assessment is required to obtain comprehensive study of this scaffold. This green synthesis approach together with the use of 3D printing opens a new route to manufacture AgNPs-based electroactive with improved anti-bacterial properties without utilization of any toxic organic solvents.     

Electron transport in bipyridinium films

Bipyridinium dications are versatile building blocks for the assembly of functional materials. In particular, their reliable electrochemical response has encouraged the design of electroactive films. Diverse and elegant experimental strategies to coat metallic and semiconducting electrodes with bipyridinium compounds have, in fact, emerged over the past two decades. The resulting interfacial assemblies span from a few nanometers to several micrometers in thickness. They incorporate from a single molecular layer to large collections of entangled polymer chains. They transport electrons efficiently from the electrode surface to the film/solution interface and vice versa. Electron self-exchange between and the physical diffusion of the bipyridinium building blocks conspire in defining the charge transport properties of these fascinating electroactive assemblies. Often, the matrix of electron-deficient bipyridinium dications can be exploited to entrap electron-rich analytes. Electrostatic interactions promote the supramolecular association of the guests with the surface-confined host matrix. Furthermore, chromophoric sites can be coupled to the bipyridinium dications to produce photosensitive arrays capable of harvesting light and generating current. Thus, thorough investigations on the fundamental properties of these functional molecule-based materials can lead to promising applications in electroanalysis and solar energy conversion, while contributing to advances in the basic understanding of electron transport in interfacial assemblies.     

Ag Nanoparticle-Incorporated Natural Rubber for Mechanical Energy Harvesting Application

The energy conversion performance of the triboelectric nanogenerator (TENG) is a function of triboelectric charges which depend on the intrinsic properties of materials to hold charges or the dielectric properties of triboelectric materials. In this work, Ag nanoparticles were synthesized and used to incorporate into natural rubber (NR) in order to enhance the dielectric constant for enhancing the electrical output of TENG. It was found that the size of Ag nanoparticles was reduced with the increasing CTAB concentration. Furthermore, the CTAB surfactant helped the dispersion of metallic Ag nanoparticles in the NR-insulating matrix, which promoted interfacial polarization that affected the dielectric properties of the NR composite. Ag nanoparticle-incorporated NR films exhibited an improved dielectric constant of up to almost 40% and an enhanced TENG performance that generated the highest power density of 262.4 mW/m².