Molybdenum-catalyzed reduction of molecular dinitrogen under mild reaction conditions

Quite recently we have found two nitrogen fixation systems catalyzed by molybdenum-dinitrogen complexes under mild reaction conditions; one is the transformation of molecular dinitrogen into its synthetic equivalent of ammonia and the other is that into ammonia. A molybdenum-dinitrogen complex bearing two ferrocenyl diphosphines works as a good catalyst in the transformation of molecular dinitrogen into silylamine, where up to 226 equiv are produced based on the catalyst. A dinitrogen-bridged dimolybdenum complex bearing a PNP-type pincer ligand works as a good catalyst in the direct transformation of molecular dinitrogen into ammonia, where up to 23 equiv are produced based on the catalyst. We believe that both systems provide a new aspect in the development of novel nitrogen fixation.     

Molybdenum-catalyzed reduction of molecular dinitrogen into ammonia under ambient reaction conditions

Synthesis of transition metal–dinitrogen complexes and stoichiometric transformations of their coordinated dinitrogen into ammonia and hydrazine have so far been well investigated in order to achieve a novel nitrogen fixation under ambient conditions. As an extension of our study, the dimolybdenum–dinitrogen complex bearing PNP pincer ligands has been found to work as an effective catalyst for the formation of ammonia from dinitrogen, where 52 equiv of ammonia are produced based on the catalyst (26 equiv of ammonia are produced based on the molybdenum atom of the catalyst). This is the most effective catalytic reaction system for the formation of ammonia from molecular dinitrogen catalyzed by transition metal–dinitrogen complexes as catalysts under ambient reaction conditions. Herein, we describe recent results concerning the catalytic reaction, including the proposed reaction pathway.     

Catalytic Reactivity of Molybdenum–Trihalide Complexes Bearing PCP‐Type Pincer Ligands

Molybdenum–iodide complexes bearing a PCP[1] ligand have been found to work as excellent catalysts toward ammonia formation under ambient reaction conditions among dinitrogen‐bridged dimolybdenum complexes and other molybdenum complexes bearing PNP and PCP[2] ligands.     

Nitrogen fixation catalyzed by ferrocene-substituted dinitrogen-bridged dimolybdenum–dinitrogen complexes: unique behavior of ferrocene moiety as redox active site

A series of dinitrogen-bridged dimolybdenum–dinitrogen complexes bearing metallocene-substituted PNP-pincer ligands is synthesized by the reduction of the corresponding monomeric molybdenum–trichloride complexes under 1 atm of molecular dinitrogen. Introduction of ferrocene as a redox-active moiety to the pyridine ring of the PNP-pincer ligand increases the catalytic activity for the formation of ammonia from molecular dinitrogen, up to 45 equiv. of ammonia being formed based on the catalyst (22 equiv. of ammonia based on each molybdenum atom of the catalyst). The time profile for the catalytic reaction reveals that the presence of the ferrocene unit in the catalyst increases the rate of ammonia formation. Electrochemical measurement and theoretical studies indicate that an interaction between the Fe atom of the ferrocene moiety and the Mo atom in the catalyst may play an important role to achieve a high catalytic activity.     

Cleavage and Formation of Molecular Dinitrogen in a Single System Assisted by Molybdenum Complexes Bearing Ferrocenyldiphosphine

The N?N bond of molecular dinitrogen bridging two molybdenum atoms in the pentamethylcyclopentadienyl molybdenum complexes that bear ferrocenyldiphosphine as an auxiliary ligand is homolytically cleaved under visible light irradiation at room temperature to afford two molar molybdenum nitride complexes. Conversely, the bridging molecular dinitrogen is reformed by the oxidation of the molybdenum nitride complex at room temperature. This result provides a successful example of the cleavage and formation of molecular dinitrogen induced by a pair of two different external stimuli using a single system assisted by molybdenum complexes bearing ferrocenyldiphosphine under ambient conditions.     

Activation of chlorobenzene as phenylating agent by means of a dinitrogen-molybdenum complex

Bis(dinitrogen)bis[1,2-bis(diphenylphosphino)ethane]molybdenum reacts with chlorobenzene to form molybdenum chloro complexes and phenylated organic products. Benzene, biphenyl, o-, m-, p-chlorobiphenyl, a dihydro derivative of o-chlorobiphenyl, triphenylphosphine and diphenylvinylphosphine were formed. The isomer distribution of the chlorobiphenyls is close to that obtained by decomposition of 0.02 M benzoyl peroxide in chlorobenzene under dinitrogen. The cleavage of the PhCl bond induced by the molybdenum-dinitrogen complex appears to give rise to the same homolytic reaction pattern. Phenylation of anisole and of triethyl phosphite has also been achieved with the same reagent.     

Direct Transformation of Molecular Dinitrogen into Ammonia Catalyzed by Cobalt Dinitrogen Complexes Bearing Anionic PNP Pincer Ligands

The direct formation of ammonia from molecular dinitrogen under mild reaction conditions was achieved by using new cobalt dinitrogen complexes bearing an anionic PNP‐type pincer ligand. Up to 15.9 equivalents of ammonia were produced based on the amount of catalyst together with 1.0 equivalent of hydrazine (17.9 equiv of fixed nitrogen atoms).     

Catalytic reduction of dinitrogen to ammonia by molybdenum: theory versus experiment

Molybdenum complexes that contain the triamidoamine ligand [(RNCH(2)CH(2))(3)N](3-) (R = 3,5-(2,4,6-iPr(3)C(6)H(2))(2)C(6)H(3)) catalyze the reduction of dinitrogen to ammonia at 22 degrees C and 1 atm with protons from 2,6-dimethylpyridinium and electrons from decamethylchromocene. Several theoretical studies have been published that bear on the proposed intermediates in the catalytic dinitrogen reduction reaction and their reaction characteristics, including DFT calculations on [(HIPTNCH(2)CH(2))(3)N]Mo species (HIPT =hexaisopropylterphenyl = 3,5-(2,4,6-iPr(3)C(6)H(2))(2)C(6)H(3)), which contain the actual triamidoamine ligand that is present in catalytic intermediates. Recent theoretical findings are compared with experimental findings for each proposed step in the catalytic reaction.     

The Triple‐Bond Metathesis of Aryldiazonium Salts: A Prospect for Dinitrogen Cleavage

The {N₂} unit of aryldiazonium salts undergoes unusually facile triple‐bond metathesis on treatment with molybdenum or tungsten alkylidyne ate complexes endowed with triphenylsilanolate ligands. The reaction transforms the alkylidyne unit into a nitrile and the aryldiazonium entity into an imido ligand on the metal center, as unambiguously confirmed by X‐ray structure analysis of two representative examples. A tungsten nitride ate complex is shown to react analogously. Since the bonding situation of an aryldiazonium salt is similar to that of metal complexes with end‐on‐bound dinitrogen, in which {N₂}→M σ donation is dominant and electron back donation minimal, the metathesis described herein is thought to be a conceptually novel strategy toward dinitrogen cleavage devoid of any redox steps and, therefore, orthogonal to the established methods.     

Catalytic Activity of Molybdenum Complexes Bearing PNP-Type Pincer Ligand toward Ammonia Formation

We newly designed and prepared a novel molybdenum complex bearing a 4-[3,5-bis(trifluoromethyl)phenyl]pyridine-based PNP-type pincer ligand, based on the bond dissociation free energies (BDFEs) of the N−H bonds in molybdenum-imide complexes bearing various substituted pyridine-based PNP-type pincer ligands. The complex worked as an excellent catalyst toward ammonia formation from the reaction of an atmospheric pressure of dinitrogen with samarium diiodide as a reductant and water as a proton source under ambient reaction conditions, where up to 3580 equivalents of ammonia were formed based on the molybdenum atom of the catalyst. The catalytic activity was significantly improved by one order of magnitude larger than that observed when using the complex before modification.     

Nitrogen fixation under mild ambient conditions: part I--the initial dissociation/association step at molybdenum triamidoamine complexes

In several recent studies Schrock and collaborators demonstrated for the first time how molecular dinitrogen can be catalytically transformed under mild and ambient conditions to ammonia by a molybdenum triamidoamine complex. In this work, we investigate the geometrical and electronic structures involved in this process of dinitrogen activation with quantum chemical methods. Density functional theory (DFT) has been employed to calculate the coordination energies of ammonia and dinitrogen relevant for the dissociation/association step in which ammonia is substituted by dinitrogen. In the DFT calculations the triamidoamine chelate ligand has been modeled by a systematic hierarchy of increasingly complex substituents at the amide nitrogen atoms. The most complex ligand considered is an experimentally known ligand with an HMT = 3,5-(2,4,6-Me3C6H2)2C6H3 substituent. Several assumptions by Schrock and collaborators on key reaction steps are confirmed by our calculations. Additional information is provided on many species not yet observed experimentally. Particular attention is paid to the role of the charge of the complexes. The investigation demonstrates that dinitrogen coordination is enhanced for the negatively charged metal fragment, that is, coordination is more favorable for the anionic metal fragment than for the neutral species. Coordination of N2 is least favorable for the cationic metal fragment. Furthermore, ammonia abstraction from the cationic complex is energetically unfavorable, while NH3 abstraction is less difficult from the neutral and easily feasible from the anionic low-spin complex.     

One-step synthesis of Mo(0) and W(0) bis(dinitrogen) complexes with the linear tetraphosphine ligand prP4: stereoselective formation of cis-[M(N2)2(rac-prP4)] and trans-[M(N2)2(meso-prP4)]; M = Mo, W

A new synthetic pathway to Chatt-type Mo(0) and W(0) bis(dinitrogen) complexes with the ligand prP(4) is presented (prP(4) is a linear tetraphos ligand with two ethylene bridges and a central propylene bridge). The synthesis starts from MoCl(5) and WCl(6), respectively, employing Mg as reductant. Whereas the electrochemical reduction of the oxido-iodido-molybdenum(IV) complex [Mo(O)I(meso-prP(4)](+) (1) only gave trans-[Mo(N(2))(2)(meso-prP(4))] (2a; R?mer et al., Eur. J. Inorg. Chem.2008, 3258), the direct synthesis under normal conditions affords both trans and cis complexes 2a and 2b. The reaction products are characterised by vibrational and NMR spectroscopy. Moreover, a single-crystal X-ray structure determination of cis-α-[Mo(N(2))(2)(rac-prP(4))] (2b) is performed. In contrast to the trans bis(dinitrogen)molybdenum(0) complex 2a supported by the meso prP(4) ligand the corresponding cis-complex is exclusively coordinated by the rac isomer of prP(4). The reactivity of 2 with acids is investigated as well, leading to the NNH(2) complex [MoF(NNH(2))(meso-prP(4))]BF(4) (15). Analogous results are obtained with the tungsten complexes.     

Catalytic Dinitrogen Fixation to Form Ammonia at Ambient Reaction Conditions Using Transition Metal‐Dinitrogen Complexes

This paper presents recent progress in catalytic transformation of molecular dinitrogen into ammonia or its equivalents, such as silylamine, especially using transition metal‐dinitrogen complexes under ambient reaction conditions. Several catalytic systems have been recently established using molybdenum‐, iron‐, and cobalt‐dinitrogen complexes or their precursors as catalysts, providing new approaches to the development of novel nitrogen fixation under ambient reaction conditions.     

Energetics and mechanism of ammonia synthesis through the Chatt Cycle: conditions for a catalytic mode and comparison with the Schrock Cycle

Through a series of DFT calculations the energy profile of the Chatt cycle is evaluated. This is the counterpiece of our earlier investigations of the Schrock cycle (Angew. Chem. 2005, 117, 5783; Angew. Chem. Int. Ed. 2005, 44, 5639), applying the same quantumchemical methodology and approximations. As for the Schrock cycle, decamethylchromocene acts as reductant. The protonation reactions are considered to be mediated by HBF4/diethyl ether or lutidinium. For all protonation and reduction steps the corresponding free reaction enthalpy changes are calculated. The derived energy profile and corresponding reaction mechanism bear strong similarities to the Schrock cycle. In particular, the most endergonic reaction is the first protonation of the N2 complex and the most exergonic reaction is the cleavage of the N--N bond. If lutidinium is employed as acid and Cp2*Cr as reductant, the reaction course involves steps that are not thermally allowed. For HBF4/diethyl ether as the acid and Cp2*Cr as reducant, however, a catalytic cycle consisting of thermally allowed reactions is principally feasible. This cycle involves a Mo I-fluoro complex as dinitrogen intermediate. It is shown that regeneration to the Mo 0-bis(dinitrogen) complex is thermally not accessible in this system. Moreover, the Mo I fluoro-dinitrogen complex is labile towards disproportionation. The implications of these results with respect to the realization of a catalytic system on the basis of Mo and W phosphine complexes are discussed.     

Lewis adducts of the side-on end-on dinitrogen-bridged complex [{(NPN)Ta}2(mu-H)2(mu-eta 1:eta 2-N2)] with AlMe3, GaMe3, and B(C6F5)3: synthesis, structure, and spectroscopic properties

Reaction of the side-on end-on dinitrogen complex [{(NPN)Ta}(2)(mu-H)(2)(mu-eta(1):eta(2)-N(2))] (1; in which NPN=(PhNSiMe(2)CH(2))(2)PPh), with the Lewis acids XR(3) results in the adducts [{(NPN)Ta}(2)(mu-H)(2)(mu-eta(1):eta(2)-NNXR(3))], XR(3)=GaMe(3) (2), AlMe(3) (3), and B(C(6)F(5))(3) (4). The solid-state molecular structures of 2, 3, and 4 demonstrate that the N-N bond length increases relative to those found in 1 by 0.036, 0.043, and 0.073 A, respectively. In solution complexes 2-4 are fluxional as evidenced by variable-temperature (1)H NMR spectroscopy. The (15)N{(1)H} NMR spectra of 2-4 are reported; furthermore, their vibrational properties and electronic structures are evaluated. The vibrational structures are found to be closely related to that of the parent complex 1. Detailed spectroscopic analysis on 2-4 leads to the identification of the theoretically expected six normal modes of the Ta(2)N(2) core. On the basis of experimental frequencies and the QCB-NCA procedure, the force constants are determined. Importantly, the N-N force constant decreases from 2.430 mdyn A(-1) in 1 to 1.876 (2), 1.729 (3), and 1.515 mdyn A(-1) (4), in line with the sequence of N-N bond lengths determined crystallographically. DFT calculations on a generic model of the Lewis acid adducts 2-4 reveal that the major donor interaction between the terminal nitrogen atom and the Lewis acid is mediated by a sigma/pi hybrid molecular orbital of N(2), corresponding to a sigma bond. Charge analysis performed for the adducts indicates that the negative charge on the terminal nitrogen atom of the dinitrogen ligand increases with respect to 1. The lengthening of the N-N bond observed for the Lewis adducts is therefore explained by the fact that charge donation from the complex fragment into the pi* orbitals of dinitrogen is increased, while electron density from the N-N bonding orbitals p(sigma) and pi(h) is withdrawn due to the sigma interaction with the Lewis acid.     

TpRu complexes as recoverable Lewis acid catalysts for enantioselective solvent-free cycloaddition reactions (Tp = hydrotris(pyrazolyl)borate)

The enantiomerically and diastereomerically pure dinitrogen-bridged complexes [{TpRu(L)}₂(μ-N₂)][PF₆]₂ (L = R,R- or S,S-1,2-bis(diphenylphosphinoamino)cyclohexane (R,R- or S,S-dppach)) were prepared by reaction of the corresponding chloro-complexes [TpRuCl(L)] with NaPF₆ in dichloromethane under dinitrogen. The dinitrogen adducts react with neat methacrolein furnishing the labile complexes [TpRu(methacrolein)(L)][PF₆] (L = R,R- or S,S-dppach). Both the dinitrogen and methacrolein derivatives are catalysts for the solvent-free regio- and enantioselective Diels–Alder reactions between methacrolein and cyclopentadiene or pentamethylcyclopentadiene, with moderate enantiomeric excesses ranging from 36 to ca. 70%. The metal complex can be easily recovered and re-utilised for further reactions. The dinitrogen complexes also catalyse the 1,3-dipolar cycloaddition reaction between methacrolein and benzylidenephenylamine N-oxide to yield 5-methyl-2-N-3-diphenyl-isoxazolidine-5-carbaldehyde with very high regioselectivity and 32% enantiomeric excess.     

Synthesis,Structure, and Reactivity of Hydridoiridium Complexes Bearing a Pincer‐Type PSiP Ligand

A series of iridium tetrahydride complexes [Ir(H)₄(PSiP‐R)] bearing a tridentate pincer‐type bis(phosphino)silyl ligand ([{2‐(R₂P)C₆H₄}₂MeSi]⁻, PSiP‐R, R=Cy, iPr, or tBu) were synthesized by the reduction of [IrCl(H)(PSiP‐R)] with Me₄N ⋅ BH₄ under argon. The same reaction under a nitrogen atmosphere afforded a rare example of thermally stable iridium(III)–dinitrogen complexes, [Ir(H)₂(N₂)(PSiP‐R)]. Two isomeric dinitrogen complexes were produced, in which the PSiP ligand coordinated to the iridium center in meridional and facial orientations, respectively. Attempted substitution of the dinitrogen ligand in [Ir(H)₂(N₂)(PSiP‐Cy)] with PMe₃ required heating at 150 °C to give the expected [Ir(H)₂(PMe₃)(PSiP‐Cy)] and a trigonal bipyramidal iridium(I)–dinitrogen complex, [Ir(N₂)(PMe₃)(PSiP‐Cy)]. The reaction of [Ir(H)₄(PSiP‐Cy)] with three equivalents of 2‐norbornene (nbe) in benzene afforded [Ir^I(nbe)(PSiP‐Cy)] in a high yield, while a similar reaction of [Ir(H)₄(PSiP‐R)] with an excess of 3,3‐dimethylbutene (tbe) in benzene gave the C H bond activation product, [Ir^III(H)(Ph)(PSiP‐R)], in high yield. The oxidative addition of benzene is reversible; heating [Ir^III(H)(Ph)(PSiP‐Cy)] in the presence of PPh₃ in benzene resulted in reductive elimination of benzene, coordination of PPh₃, and activation of the C H bond of one aromatic ring in PPh₃. [Ir^III(H)(Ph)(PSiP‐R)] catalyzed a direct borylation reaction of the benzene C H bond with bis(pinacolato)diboron. Molecular structures of most of the new complexes in this study were determined by a single‐crystal X‐ray analysis.     

Eclipsed M2X6 compounds exhibiting very short metal-metal triple bonds

The preparation, characterization, and electronic structure of homoleptic complexes of molybdenum and tungsten bridged by bis(alkylamido)phenylboranes, M(2)[RN-B(Ph)-NR](3) (M = Mo, R = Et (1), (i)Pr (2); M = W, R = Et (3), (i)Pr (4)), are described. These triple metal-metal bond species (i) exhibit a nearly eclipsed ligand geometry and (ii) possess the shortest metal-metal bonds of neutral dimolybdenum and ditungsten M(2)X(6) complexes observed to date (d(Mo-Mo) = 2.1612(6) A (1); d(W-W) = 2.2351(7) A (4)).     

The influence of peripheral ligand bulk on nitrogen activation by three‐coordinate molybdenum complexes—A theoretical study using the ONIOM method

Electronic structure methods have been combined with the ONIOM approach to carry out a comprehensive study of the effect of ligand bulk on the activation of dinitrogen with three‐coordinate molybdenum complexes. Calculations were performed with both density functional and CCSD(T) methods. Our results show that not only is there expected destabilization of the intermediate on the pathway due to direct steric interactions of the bulky groups, but also there is significant electronic destabilization as the size of the ligand increases. This latter destabilization is due to the inability of the molecule to accommodate a rotated amide group bound to the molybdenum once the amide reaches a certain size. This destabilization also leads to a clear preference for the triplet intermediate (rather than the singlet intermediate) for bulky substituents which is in agreement with experiment. Overall, the calculated reaction profile for the bulky substituents shows a good correlation with the available experimental data. © 2009 Wiley Periodicals, Inc. J Comput Chem 2009     

Why vanadium complexes perform poorly in comparison to related molybdenum complexes in the catalytic reduction of dinitrogen to ammonia (Schrock cycle): a theoretical study

Energetics and mechanistic details for the conversion of dinitrogen to ammonia mediated by vanadium triamidoamine has been studied theoretically involving various mechanistic possibilities. For most of the cases, protonation at the amido nitrogen atom is more favorable compared to the terminal one. Further, the most important steps of the mechanism were compared with the well established chemistry of nitrogen fixation mediated by molybdenum. Such a comparison helps in understanding why vanadium triamidoamine complex performs poorly compared to molybdenum. The main factors responsible for the poor performance of the vanadium complex toward NH(3) production are identified as low exergonic cleavage of the N-N bond and limitation of the ligand exchange step via a dissociative mechanism at the end of the cycle to only one possible pathway. A major aspect of the failure of the vanadium complex to mediate the reduction of N(2) to ammonia is the fact that the protonation steps involve major barriers, which cannot be surmounted thermally. Moreover, unlike molybdenum, the associative mechanism with vanadium triamidoamine complex is not likely to operate during the NH(3)/N(2) exchange step.