X射线荧光光谱法分析镁砂的主次成分

采用镁砂标准样品作为校准样品,建立了熔融制样X射线荧光光谱法测定镁砂中MgO,Al2O3,SiO2,CaO,P2O5,Fe2O3的方法。采用熔融法为样品片和校准片的制备方法,选择四硼酸锂-偏硼酸锂（67＋33）为助熔剂,1.00mL LiBr溶液为脱模剂,熔融温度为1 100℃,熔融时间20min。对镁砂样品测定的相对标准偏差（RSD）小于3%,对不同镁砂标准样品进行测定,方法的测定结果与认证值相吻合。     

X-射线荧光光谱法分析硅质耐火材料的主次成分

采用硅石标准样品作为校准样品,建立了熔融制样X-射线荧光光谱法测定硅质耐火材料中SiO2、Al2O3、CaO、MgO、P2O5、Fe2O3、TiO2、K2O、Na2O的方法.采用熔融法为样品片和校准片的制备方法,选择四硼酸锂-偏硼酸锂(质量比为67∶33)为助熔剂,1.00mL LiBr溶液为脱模剂,熔融温度1100℃...     

偏硼酸锂-四硼酸锂熔融-电感耦合等离子体原子发射光谱(ICP-AES)法测定石膏中多组分含量

石膏在我国储量丰富,应用广泛,快速准确分析其成分含量对石膏资源的综合利用具有重要意义。针对酸溶法无法测定SiO2,碱熔法无法测定K2O、Na2O的问题,本文建立一种偏硼酸锂-四硼酸锂熔融-电感耦合等离子体发射光谱法同时测定石膏中CaO、SO3、Al2O3、Fe2O3、MgO、TiO2、K2O、Na2O、SiO2含量。实验优化了熔剂用量、熔融温度,结果表明采用试样与偏硼酸锂-四硼酸锂混合熔剂质量比例1：5,在铂金坩埚中1000 ℃熔融10 min,在超声条件下,于50 mL 10 %盐酸中浸取熔融物,能够有效分解试样而浸取待测组分。向标准溶液系列中加入偏硼酸锂-四硼酸锂-盐酸基体溶液以消除基体对测试结果的影响。各待测组分的校准曲线的相关性系数均大于0.9990,方法检出限在3~292 μg/g范围内;采用实验方法分别对国家一级标准物质GBW03109a、GBW03110和实际样品进行测定,标准物质的5次平行测试的相对标准偏差在0.14 %~8.86 %之间,测定结果的相对误差在0.03~8.75 %之间,测试结果与标准值无显著性差异;实际样品中各成分测定值的RSD（n=5）为0.24~8.80 %。该方法操作简单、准确度高、精密度好、检出限低,可以同时测定石膏中的多组分含量,能够为石膏资源综合利用调查评价提供一定的技术支撑 。     

熔融制样-X射线荧光光谱法测定铁矿石中钾、铅、锌和砷

采用熔融制样-X射线荧光光谱法测定铁矿石中钾、铅、锌和砷的含量。样品以四硼酸锂和碳酸锂为熔剂,在1 050℃下熔融20min,冷却后制成玻璃融片,用于X射线荧光光谱分析,以标准物质制作校准曲线。方法应用于铁矿石标准样品(GSB 1805-2005)的测定,测定值与认定值相符,测定值的相对标准偏差(n=10)在2.0%~4.5%之间。     

熔融制样-X射线荧光光谱法测定直接还原铁中主次元素含量

应用熔融制样-X射线荧光光谱法测定了直接还原铁中主次元素的含量。样品置于铂金坩埚中,以四硼酸锂和偏硼酸锂为熔剂于1 050℃熔融20min,将熔化的样品倒入铂金模具中,所制得的片样用于X射线荧光光谱分析。以铁矿石标准物质GBW 07221等25种标准物质制作校准曲线,以固定理论α影响系数法校正基体效应。方法用于实际样品的分析,所得结果与其他方法测定值相符。测定值的相对标准偏差(n=10)在0.31%~16%之间。     

熔融制样-X射线荧光光谱法测定锆钛矿中主次成分

锆钛矿是一种稀缺资源,也是一种战略性矿产,准确分析锆、钛及其共伴生有用有害元素含量对综合评价锆钛矿资源具有重要意义。本文采用稀释比1:20的四硼酸锂-偏硼酸锂混合熔剂,先700℃预氧化7min,再1050℃熔融19min制样,建立了熔融制样-X射线荧光光谱法测定锆钛矿中SiO2、Al2O3、Fe2O3、CaO、MgO、MnO、TiO2、K2O、Na2O、P2O5、ZrO211种主次成分的分析方法。该方法解决了锆钛矿石前处理过程中锆钛易水解,分析周期长的问题。采用标准样品加入光谱纯的方式配制锆钛矿的标准系列样品解决锆钛矿石标准样品不足的问题。本方法各组分的检出限在0.004~0.13%之间,各组分测定结果的相对标准偏差(RSD,n=12)在0.060~2.6%之间。采用本方法对实际样品进行测定,测定值与传统方法测定值一致,并具有操作简便,分析周期短的优点。     

熔融法制样-X射线荧光光谱法测定钛铁中5种元素含量

在铂合金坩埚中称取四硼酸锂(4.000 0±0.000 1)g,在950℃下进行熔融,使得坩埚内壁形成一层蜡状的保护膜。在经处理的铂合金坩埚中加入无水四硼酸锂1.000 0g、过氧化钡0.500 0g、碳酸锂0.500 0g、钛铁样品0.100 0g,混匀,将2.000 0g无水四硼酸锂覆盖在表面,沿试剂周边加入1 000g·L~(-1)溴化锂溶液0.35mL,然后进行熔融制样。用5个标准样品和2个由高纯铁粉和标准样品配制的校准样品建立校准曲线,同时测定钛铁中钛、硅、锰、铝和磷的含量。选用Ti Kɑ为分析谱线,以钡为内标对钛进行校正。采用经验系数法和理论α系数法对硅、铝和磷进行基体校正和谱线干扰校正。采用此方法分析钛铁样品,所得结果和湿法化学法的结果一致,测定值的相对标准偏差(n=11)在0.24%~4.7%之间。     

熔融法制样-X射线荧光光谱法测定煤灰中主次成分的含量北大核心CSCD

在铂金坩埚中依次加入4.000 0g无水四硼酸锂,0.250 0g试样,0.250 0g钴内标试剂,搅拌均匀,再用3.000 0g无水四硼酸锂覆盖在表面,加入1 000g·L-1溴化锂溶液0.25mL后,在电加热自动熔样机中于650℃预氧化10min后,在1 080℃前置2min,熔融17min,后置3min制得熔片,在所选仪器工作条件下测定煤灰中主次成分的含量。选用12份经国家标准方法定值的煤灰样品和两份铁矿石标准样品作为校准样品绘制标准曲线,采用经验系数法和理论α系数法对曲线进行基体校正和谱线重叠干扰校正。采用试验方法对煤灰样品中各组分进行测定,所得结果和标准方法测得值一致,测定值的相对标准偏差(n=11)在0.23%~5.3%之间。     

熔融法制样-X射线荧光光谱法测定煤灰中主次成分的含量

在铂金坩埚中依次加入4.000 0g无水四硼酸锂,0.250 0g试样,0.250 0g钴内标试剂,搅拌均匀,再用3.000 0g无水四硼酸锂覆盖在表面,加入1 000g·L-1溴化锂溶液0.25mL后,在电加热自动熔样机中于650℃预氧化10min后,在1 080℃前置2min,熔融17min,后置3min制得熔片,在所选仪器工作条件下测定煤灰中主次成分的含量。选用12份经国家标准方法定值的煤灰样品和两份铁矿石标准样品作为校准样品绘制标准曲线,采用经验系数法和理论α系数法对曲线进行基体校正和谱线重叠干扰校正。采用试验方法对煤灰样品中各组分进行测定,所得结果和标准方法测得值一致,测定值的相对标准偏差(n=11)在0.23%~5.3%之间。     

碱熔-标准物质法-电感耦合等离子体发射光谱(ICP-AES)法测定硅酸盐岩中10种主量元素

硅酸盐岩元素的准确测定是其地球化学分析研究的基础,其主量元素含量通常可以采用电感耦合等离子体发射光谱(ICP-AES)法测定,但其测定方法的系统性研究相对缺乏,尤其是样品前处理和基体干扰的有效消除两方面。前处理过程中,考察不同熔剂用量对硅酸盐岩样品的分解能力,发现当熔剂与样品比例达到6:1后,熔珠为纯色透明,经稀硝酸提取后溶液澄清,确定了硅酸盐岩前处理时熔剂与样品的最佳配比。测定过程中,通过考察基体匹配法和标准物质法两种基体干扰消除方法对测定结果的影响,发现当采用与岩性一致或者接近的标准物质绘制校准工作曲线时,基体干扰消除效果更好,更适用于测定硅酸盐岩10种主量元素含量。据此,建立了硅酸盐岩经偏硼酸锂熔融,稀硝酸振荡提取处理,以标准物质法绘制校准工作曲线,采用ICP-AES法同时测定SiO2、Fe2O3、Al2O3、CaO、K2O、MgO、Na2O、TiO2、P2O5、MnO 10种成分含量的方法。对岩石标准物质GBW07107进行分析测定,方法的相对标准偏差(RSD)为0.17%～0.75%,方法检出限为0.001%~0.016%,满足硅酸盐岩样品元素定量分析的要求,而且操作简单快速,环境污染小,适用于大批量样品分析。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).