功能接枝微粒PDMAEMA/SiO_2的制备及其吸附特性初探

凭借偶联剂γ-(甲基丙烯酰氧)丙基三甲氧基硅烷的媒介作用,在溶液聚合体系中,采用"接出"("graft from")法将单体甲基丙烯酸二甲氨基乙基酯(DMAEMA)接枝于硅胶微粒表面,制得了接枝微粒PDMAEMA/SiO2,重点考察了主要因素对接枝聚合的影响,并测定了接枝微粒的Zeta电位,初步考察了其吸附特性。研究结果表明,已接枝到硅胶表面的聚合物层,会对后续的接枝聚合产生阻隔作用;温度及引发剂用量等因素显著影响接枝度,在适宜条件下可制得接枝度为22g/100g的接枝微粒;在较大的pH范围内,接枝微粒的Zeta电位为较大的正值,在静电相互作用下,接枝微粒对铬酸根离子会产生强吸附作用.     

氨基-铈盐氧化还原体系引发对苯乙烯磺酸钠在硅胶微粒表面的接枝聚合

使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面化学改性,将氨基引入硅胶微粒表面,构成氨基-Ce(Ⅳ)盐氧化-还原引发体系。研究了在其作用下对苯乙烯磺酸钠(SSS)在硅胶微粒表面的接枝聚合,制得了具有较高接枝度(18g/100g)的接枝微粒PSSS/SiO2。采用FTIR、SEM及TGA等方法对接枝微粒进行表征。考察了对该表面引发接枝聚合体系接枝度影响的主要因素。结果表明,氨基-Ce(Ⅳ)盐体系可以有效地引发乙烯基单体在固体微粒表面的接枝聚合,氨基的质子化对产生自由基的引发步骤具有负影响;为提高PSSS的接枝度,引发剂溶液(铈盐+硫酸)宜采用滴加的方式加入;适宜的单体浓度为14(wt)%;接枝聚合宜在50℃下进行。接枝微粒PSSS/SiO2是一种功能复合微粒,凭借离子交换作用,对重金属离子和稀土离子均可产生强的吸附作用。     

阳离子功能接枝微粒QPDMAEMA/SiO_2的制备及其对阿魏酸吸附特性的研究

使含有氨基的改性硅胶微粒表面的氨基与溶液中的过硫酸盐构成氧化-还原引发体系,实施了甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面的引发接枝聚合,制得接枝微粒PDMAEMA/SiO2;又以氯乙胺为试剂,使接枝的大分子PDMAEMA的叔胺基团发生季铵化反应,实现了接枝微粒PDMAEMA/SiO2的季铵化(Quaternization)转变,制得了阳离子性功能接枝微粒QPDMAEMA/SiO2。采用红外光谱(FTIR)、扫描电子显微镜(SEM)及Zeta电位测定等多种手段对两种微粒进行了表征。主要研究了温度对接枝聚合和季铵化转变反应的影响,优化了反应条件。还考察了功能接枝微粒QPDMAEMA/SiO2对阿魏酸的子吸附性能。研究结果表明,采用-NH2//S2O82-表面引发体系,可有效地实现DMAEMA的接枝聚合,适宜的反应温度为35℃;氯乙胺与接枝微粒叔胺基团之间的季铵化反应可顺利进行,适宜的反应温度为60℃,叔胺基团的季铵化度可达82%。凭借主-客体之间的强静电相互作用并协同以阳离子-π相互作用,功能接枝微粒QPDMAEMA/SiO2对阿魏酸可产生很强的吸附作用,在中性条件下,吸附容量高达187mg/g。     

表面引发接枝聚合法制备接枝微粒PHEMA/SiO2及其8-羟基喹啉功能化转变研究

通过用表面引发接枝聚合和高分子反应制备8-羟基喹啉型复合螯合微粒.首先使用γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性,制得改性微粒AMPS-SiO2;使改性微粒AMPS-SiO2表面的氨基与溶液中的过硫酸盐构成氧化-还原引发体系,实施了甲基丙烯酸羟乙酯(HEMA)在硅胶微粒表面的高效引发接枝聚合,制得了接枝微粒PHEMA/SiO2.又以5-氯甲基-8-羟基喹啉(CHQ)为试剂,使接枝的PHEMA发生大分子反应,实现了接枝微粒PHEMA/SiO2的8-羟基喹啉功能化转变,制得了复合微粒HQ-PHEMA/SiO2.采用多种手段对两种微粒进行了表征,重点研究了氨基-过硫酸盐表面引发接枝体系的接枝聚合机理,并研究了CHQ与接枝PHEMA的醇羟基之间取代反应的机理,还初步考察了功能微粒HQ-PHEMA/SiO2对重金属离子的螯合吸附性能.研究结果表明,氨基-过硫酸盐表面引发接枝聚合体系具有很高的引发活性,在室温(30℃)即可制得高接枝密度(40 g/100g)的接枝微粒PHEMA/SiO2;CHQ与接枝PHEMA的醇羟基之间的取代反应遵循SN1的反应历程,使用强极性溶剂有利于反应的进行.微粒HQ-PHEMA/SiO2对重金属离子呈现很强的螯合吸附能力,是一种功能复合微粒.     

基于PGMA的亚氨乙酸型复合螯合吸附材料IDAA-PGMA-SiO_2的制备

凭借偶联剂γ-(甲基丙烯酰氧)丙基三甲氧基硅烷的媒介作用,在溶液聚合体系中,采用"接出"法将单体甲基丙烯酸缩水甘油酯(GMA)接枝于微米级硅胶微粒表面,制得了接枝微粒PGMA-SiO2,使亚氨二乙酸(IDAA)与接枝PGMA的环氧基团发生开环反应,将IDAA基团引入接枝微粒表面,制得了复合螯合微粒IDAA-PGMA-SiO2。重点考察了接枝聚合的影响因素,并初步考察了螯合微粒IDAA-PGMA-SiO2对稀土离子的吸附行为。研究结果表明:已接枝到硅胶表面的聚合物层,会对后续的接枝聚合产生阻隔作用。温度及引发剂用量等因素显著影响接枝度,在适宜条件下可制得接枝度为17.48 g/100 g的接枝微粒PGMA-SiO2。在配位螯合作用下,接枝微粒对稀土Eu3+呈现强吸附能力。     

刷状结构的阳离子性接枝微粒QPDMAEMA/SiO_2对牛血清白蛋白的吸附特性

以微米级硅胶微粒为基质,通过接枝聚合和大分子反应,制备了具有刷状结构的阳离子性接枝微粒,深入研究了其对牛血清白蛋白(BSA)的强吸附能力、吸附机理和吸附热力学.首先使含叔胺基团的单体甲基丙烯酸二甲基氨基乙酯(DMAEMA)在硅胶微粒表面发生接枝聚合,制得接枝微粒PDMAEMA/SiO2,然后以氯乙胺为试剂,使接枝大分子PDMAEMA链中的叔胺基团发生季铵化反应,获得了具有刷状结构的阳离子聚电解质的功能接枝微粒QPDMAEMA/SiO2.测定了微粒QPDMAEMA/SiO2的zeta电位,实施了对BSA的等温吸附实验,考察了介质pH值、离子强度及温度对吸附作用的影响,研究了吸附热力学.研究结果表明,功能接枝微粒QPDMAEMA/SiO2比接枝微粒PDMAEMA/SiO2具有更高的zeta电位,在静电相互作用驱动下,微粒QPDMAEMA/SiO2对BSA具有很强的吸附能力.吸附容量随介质pH值的增大呈现先增大后减小的变化趋势,当pH值等于BSA的等电点(pI=4.7)时,具有最高的吸附容量(高达112 mg?g-1).以等电点为界,离子强度对吸附容量会产生完全相反的影响作用:当介质pH值小于BSA的等电点时,电解质浓度增大,吸附容量增高;当介质pH值等于BSA的等电点时,吸附容量几乎不随电解质的浓度发生变化.吸附过程熵值减小而且放出热量,是一个焓驱动的吸附过程.     

构建巯基-Ce(Ⅳ)盐氧化还原引发体系实现丙烯腈在硅胶微粒表面的高效接枝聚合

使用偶联剂γ-巯丙基三甲氧基硅烷(MPMS,KH-590),对微米级硅胶微粒进行了表面化学改性,将巯基引入硅胶微粒表面(SiO2-MPMS),构成巯基-Ce(Ⅳ)盐氧化-还原引发体系,探索研究了丙烯腈在硅胶微粒表面的引发接枝聚合,制得了高接枝度(30 g/100g)的接枝微粒SiO2-MPMS-g-PAN.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-MPMS-g-PAN进行了表征.在此基础上,重点研究了主要因素对巯基-Ce(Ⅳ)盐体系引发AN接枝聚合的影响.研究结果表明,类似于羟基-Ce(Ⅳ)盐体系,巯基-Ce(Ⅳ)盐体系也可以有效地引发乙烯基单体在固体微粒表面接枝聚合.与在固体微粒表面引入可聚合双键的"grafting through"接枝聚合法相比,铈盐引发的接枝聚合,由于活性位点居于载体表面,故具有高的接枝度,是一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-MPMS-g-PAN,本研究体系适宜的酸浓度为0.25 mol/L;Ce(Ⅳ)盐浓度为5.0×10-3 mol/L;接枝聚合宜在50℃下进行.     

表面引发接枝聚合法制备高接枝度的接枝微粒SiO2-g-PMAA

将偶联剂γ-氨丙基三甲氧基硅烷(AMPS)键合在硅胶微粒表面,得到改性微粒AMPS-SiO2;使改性微粒表面的氨基与溶液中的过硫酸铵构成氧化-还原引发体系,实现了甲基丙烯酸(MAA)在硅胶微粒的表面引发接枝聚合,制得了高接枝度(0.30 g/g)的接枝微粒SiO2-g-PMAA;研究了影响表面引发接枝聚合的主要因素。 结果表明,适宜的温度为40 ℃。 已接枝到硅胶表面的聚合物层对后续的接枝聚合产生阻隔作用。 适宜的引发剂用量为单体质量的1.1%,适宜的单体质量分数为5%左右。     

接枝微粒PMAA/SiO2对胆红素吸附性能的研究

采用溶液聚合法将甲基丙烯酸(MAA)接枝于硅胶微粒表面,制得了接枝微粒PMAA/SiO2；并通过静态吸附实验研究了该功能微粒对胆红素的吸附性能,考察了介质pH值、离子强度及温度等因素对吸附性能的影响,研究了在牛血清白蛋白(BSA)存在下该微粒的吸附性能.静态吸附实验结果表明,接枝微粒PMAA/SiO2对胆红素具有较强吸...     

接枝微粒材料P4VP-SiO_2对酸性氨基酸的吸附性能与吸附机理

将4-乙烯基吡啶(4VP)接枝聚合于微米级硅胶表面,制得了接枝有聚4-乙烯基吡啶(P4VP)的接枝微粒P4VP-SiO_2,测定了P4VP-SiO_2的红外光谱,袁征了其化学结构,并测定了该复合型功能微粒材料的Zeta电位.采用静态法研究了P4VP-SiO_2对酸性氨基酸天冬氨酸与谷氨酸的吸附性能,考察了介质pH、离子强度及温度对其吸附性能的影响,探索了吸附机理.研究结果表明:在较大的pH范围内,P4VP-SiO_2的Zeta电位为较高的正值,即微粒表面携带有高密度的正电荷;酸性氨基酸天冬氨酸与谷氨酸等电点都较低,所以在一般的介质pH范围内,它们的分子带有负电荷;凭借静电相互作用,P4VP-SiO_2对酸性氨基酸天冬氨酸与谷氨酸均表现出很强的吸附能力,而对中性与碱性氨基酸(在一般的介质pH范围内分子带有正电荷)的吸附能力则很弱;随介质pH的增大,P4VP-SiO_2对天冬氨酸与谷氨酸的吸附能力呈现先增强后减弱的规律,在pH＝4处,吸附容量具有最大值,分别为280 mg/g与230 mg/g;温度升高,吸附容量减小;盐度增大,吸附容量降低.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。     

Stages of thermal decomposition of sodium oxo-salts of sulphur

Thermal behaviour of sodium oxo-salts of sulphur: Na₂SO₄, Na₂S₂O₇, Na₂S₂O₆, Na₂SO₃, Na₂S₂O₅, Na₂S₂O₄, Na₂S₂O₃, Na₂S₃O₆ and of sulphides Na₂S and Na₂S₂ was studied on heating up to 1000°C. The experiments were performed with anhydrous compounds obtained from commercial products by recrystallisation and dehydration. The stage mechanisms of decomposition of anionic sub-lattices of the salts have been proposed basing on the Górski’s morphological classification of simple species. The thermal stability and the stage decomposition mechanisms were correlated with the structure and the potential chemical properties of the salt anions. The thermal decomposition processes were studied by means of thermal analysis, and the decomposition products were identified by means of X-ray phase analysis.