Cun、Agn和Aun(n≤9)团簇的静电极化率

The static polarizabilities and polarizability anisotropies of Cun,Agn and Aun (n≤9)clusters have been calculated by the B3LYP density functional method,which is a three parameter mixture of density functional and"exact" Hartree Fock exchange. The calculated results are compared with experimental polarizabilities of sodium clusters. It is shown that the size dependency of the static polarizabilities per atom of Cun,and Agn clusters possesses the same trend as that observed in sodium clusters exception of the Aunclusters while the polarizability of Au atom is much smaller than these of Cu and Ag.The(α-)of Au atom is the smallest and the(α-)per atom of Au approach to the values of Cu from the dimmer to the hexamer. It indicates that in Au clusters the electrons are more strongly attracted by the nuclei because of the more electrons. However,the absolute polarizabilities of the noble mental clusters are considerably smaller than those of the sodium clusters and the electronic structures of the noblemental are much more compact.     

Thermodynamics of dissolving and solvation processes for benzoic acid and the toluic acids in aqueous solution

Experimental data are presented for the solubility in water of benzoic and toluic acids from 5° to 65°C. From the solubility the molality of the monomeric form of the acid is calculated using literature data for both ionization and dimerization of the acid. These data for the monomer combined with data from the literature for vaporization of the solid and ionization in both the gas phase and the aqueous phase yield entropy and enthalpy changes for the solvation of molecular and anionic forms of the acid. A similar procedure is also applied to literature data for the solubility of benzene in water. It is shown that the hydration entropies of the monomeric forms are a linear function of their partial molar volumes. It is concluded that hydration of the undissociated o-toluic acid may be crucial to the increased acidity of that acid compared to benzoic acid.     

Theoretical study of dielectric behavior of microcapsule suspensions with distributed drug release rate

Theoretical consideration is made concerning the dielectric behavior of aqueous suspensions of W/O-type microcapsules containing aqueous electrolyte solutions, especially concerning distribution effects of the electrolyte release rate on the dielectric behavior.It is shown at first that the distribution of the release rate causes electrical conductivity of the capsule interior. Next, it is deduced, in the light of a theory of the interfacial polarization, that the distribution characteristics of the capsule interior's electrical conductivity are closely related to those of the relaxation time for a dielectric relaxation exhibited by the suspensions. Several formulas are derived to describe the relation between the distribution characteristics of the release rate and those of the relaxation time.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

New aspects of migration and flame retardancy in polymer nanocomposites

Annealing of pristine polypropylene blended with the organomontmorillonite (OMMT) at temperatures of 180-340 °C under a stream of nitrogen and of nitrogen-air mixtures is investigated. The oxidative annealing brings about the dispersion of the OMMT in the polypropylene and the formation of a nanocomposite structure. This is evidenced by the increase in the interlayer distance ‘d’ as measured by small angle XRD, with time of annealing and with the weight percent of air. This indicates progressive intercalation of the polymeric matrix into the clay gallery and subsequently exfoliation. The degree of exfoliation is estimated by the extent of migration determined spectroscopically on the surface of the annealed sample. The accumulated clay on the surface due to migration hinders the penetration of the oxygen into the annealing melt as expressed by the decrease in the rate of migration with the increase in the air concentration. This indicates the increase in ageing and storage stability of nanocomposites with increase in the extent of migration. The extent of migration is proportional to the polar carbonyl groups formed on the matrix. The energy of activation of the migration was found to be 37.82 kJ/mol indicating that the rate-determining step of migration is diffusion controlled reaction. The penetration of oxygen into the melt is the first of five steps, followed by oxidation, intercalation, exfoliation and migration. Monitoring the migration with increase in the temperature enables the observation at 275 °C of the transition of the nanocomposite structure to noncolloidal microcomposite. Increasing the annealing temperature above 300 °C brings about a slow, low-temperature combustion and formation of a new kind of char on the surface of the sample.     

INFLUENCE OF THERMAL AND NON-THERMAL EFFECTS OF ULTRASOUND ON ISOTHERMS OF PHENOL ON NKA II RESIN*

1.INTRODUCTIONUltrasoundhasproventobeaveryusefultoolinenhancingthereactionratesinavarietyofreactingsystems.Ithassuccessfullyincreasedtheconversion,improvedtheyield,changedthereactionpathwayand/orinitiatedthereactioninbiological,chemicalandelectrochemicalsystem[1,2].Recentyears,thestudyofultrasonicsandsonochemistryhasexpandedconsiderably.Arapidlygrowingareaisthatof"environmentalsonochemistry",whichmainlydealswithdestructionoforganicsinaqueoussolution.Inaddition,theuseofultrasoundtoenhanced…     

水稻秸秆与PVC塑料共气化过程中钾、钠、氯的迁移行为

采用固定床反应器,结合X射线衍射(XRD)表征和热力学计算研究了水稻秸秆与PVC塑料共气化过程中钾钠氯的迁移和状态变化。结果表明,混合物中氯的释放率与反应温度和PVC塑料的量(氯含量)有关。当反应温度为800~900℃时,PVC的量对混合物中氯元素释放率的影响最为显著;气化温度达900℃时,含PVC 20%(氯含量为11.5%)的水稻秸秆混合物中,氯元素的释放率较纯水稻上升了16.5%。与此同时,氯含量的增加也促进了钾钠在气相中的释放。气化温度为850℃时,当混合物中PVC比例大于20%(氯含量大于11.5%)时,氯对钾钠的气相析出有一定抑制作用;钾钠以KCl和NaCl的形式滞留在固相中,其含量随着混合物中PVC量的升高而降低。     

锌试剂与壳聚糖的结合反应机理的研究

为从分子水平认识多糖分子与小分子之间相互作用的机理,应用光谱法研究了壳聚糖(CTS)与锌试剂(ZCN)的相互作用机理;测得ZCN-CTS复合物吸收光谱出现新的吸收峰所需的临界ZCN/CTS摩尔比为2.67×103, CTS对ZCN的最大结合数为6.93×103,实验值与理论值相吻合,证明了多糖与生物探针相互作用理论模型的可靠性;探讨了ZCN与CTS相互作用产生变色反应的机理,认为其是在ZCN与CTS大分子间发生静电相互作用的基础上,主要由ZCN与CTS大分子间的疏水相互作用所引起.     

Thermophysical Properties of Granules of Instant Drinks in the Process of Structuring

In this article the research of the thermophysical properties of the material depending on its moisture content been represented. The interrelation of various physical properties with the content of moisture in the mass were detected. In addition, their dependence on the quantitative ratio and the properties of structural carcass and pore spaces were proved. The need to consider the volume phase composition of the mixture was justified. A formula to calculate the thermal conductivity coefficient of the product molded from disperse materials was obtained on the basis of Lykov criterion defining the property of drying material and volume phase concentrations. It is proved that the use of volume phase characteristics of disperse systems opens new possibilities for improving the methodologies for determining the those thermophysical properties of dry and wet dispersion materials, allows increasing the reliability results of these definitions, revealing the mechanism of anomalous heat conductivity of wet material.     

TiO2膜光催化剂的改进及表征

提出用粉末-溶胶法制备TiO2薄膜型光催化剂,介绍了粉溶法的制备工艺及改变pH值对催化活性的影响.研究结果表明, 利用粉溶法或添加浓HNO3后制备的TiO2薄膜光催化剂表现出了较高的光催化活性.结合结构表征详细分析了其中的原因.认为粉溶法制备的催化剂表面更粗糙,比表面积增大,膜厚度减小,这些都可能是其催化活性提高的原因.而加酸后膜催化活性提高主要是因为酸性条件下表面几乎没有Ti3+表面态,利于光生电子与光生空穴的分离.     

反相微乳液模板原位聚合制备纳米氯化银/聚甲基丙烯酸甲酯及其结构表征

用甲基丙烯酸甲酯(MMA)作油相,反相胶束微乳液作为模板,制备了纳米氯化银(AgCl)粒子,再进行原位聚合制备了纳米氯化银/聚甲基丙烯酸甲酯(AgCl/PMMA)复合材料.透射电镜(TEM)分析表明,纳米AgCl的尺寸为20～80 nm.扫描电镜(SEM)测试表明纳米AgCl粒子均匀地存在于PMMA基材中.红外分析证明,胶束中水和表面活性剂AOT的羰基在MMA聚合后微观环境发生变化,纳米粒子同聚合物之间有吸附行为.动态力学(DMTA)分析复合材料,发现纳米AgCl粒子与聚合物之间存在强烈相互作用,形成了中间相层(interphase layer),改变了聚合物的动态力学性能.     

复合物Ca+-RNA碱基的结构与稳定性

Gas-phase metal ion affinities and optimized structures of RNA nucleic acid bases for the Ca+ were determined at a density functional level employing the hybrid B3LYP exchange correlation potential in connection with the 6-311+G(2df,2p) basis set. All the molecular complexes, obtained by the interaction between several low-lying tautomers of RNA nucleic acid and Ca+ on the different binding sites, were considered. For Cytosine, the most stable complex was obtained starting from the most stable tautomer of the free nucleic acid base tautomers. As to thymine, the bond energy of the ion with the most stable tautomer of the free nucleic acid base is the weakest among the three tautomer’s complexes, and that of the ion with least stable tautomer of the free nucleic acid base is the strongest . Uracil is similar to thymine. The two kinds of relation, bond energy and total energy for the complex, are in disagreement, as the metal affinities of RNA bases for the Ca+ depend on binding sites, and total energy of complex (Ca+-RNA base) relies on all atoms and their relative positions in the complex.     

A study of the ageing of the gel structure in a nonionic O/W cream by X-ray diffraction,differential scanning calorimetry and spin-lattice relaxation measurements

The time dependent changes of the lamellar gel structure in a nonionic O/W cream were studied. It appeared that the changes were connected with alterations in the hydrophilic layers of this lamellar gel structure. The structure of the hydrocarbon layers did not change. The alterations were induced by an increasing hydration of the surfactant molecules on cooling from the preparation temperature to room temperature. Ageing of the cream involves a decrease of the thickness of the hydrophilic layers and a change of the distribution of the surfactant molecules, resulting in, among other things, a decrease of the release rate of a hydrophilic drug. Ageing of the cream can be prevented by using the appropriate amount of starting materials or by the use of polymerizable surfactants. In the former case a cream, from which a drug is slowly released, is obtained. On the other hand, creams containing polymerized surfactants can release drugs at a relatively high rate.     

Effect of Ag on the Grain Growth and Dielectric Properties of PbTiO3

A series of Ag-PbTiO3 composites were synthesized, and the effects of silver on the morphological development of hydrothermal synthesized PbTiO3 particles and dielectric properties of PbTiO3 ceramic were investigated. Results show that the introduction of Ag benefits the crystal growth of PbTiO3. The diffusion of Ag+ into the perovskite accelerates the crystal growth of PbTiO3 and leads to large fine PbTiO3 crystal. Furthermore, the dielectric constant of PbTiO3-based ceramic was enhanced greatly by the percolation effect of inner Ag clusters.     

基于链化分析的磁流变液剪切屈服应力模型

Under an external magnetic field, the particles in a magnetorheological fluids (MRFs) aggregated into chains of dipoles aligned in the direction of the magnetic field so that the MRFs exhibited solidlike mechanical behavior with a yield shear stress. Based on a microscopic analysis and making use of the statistical approach, a micro-to-macroscopic model is proposed for the constitutive behavior of MRFs and the main influencing factors, such as the intensity of magnetic induction, the size of particles, volume fraction of particles, shear strain rate and saturation magnetization. The effects of the influencing factors on the macroscopic behavior of MRFs are investigated and compared with the experimental data. It is found that the proposed model can efficiently describe the mechanical properties of MRFs and can be easily applied to solve practical engineering problems.     

Chemical heterogeneity in emulsion copolymers of carboxylic monomers

Copolymer latices of butylacrylate (BA) with acrylic and methacrylic acid (AA and MAA) were prepared by batch type emulsion polymerization, and, for comparison, copolymers with identical monomer composition were prepared by batch type solution polymerization.The distribution of the carboxylic monomers in the latex particles and the serum was studied by density gradient and sedimentation experiments with the analytical ultracentrifuge. Dynamic mechanical measurements of films of these copolymers were used to determine the storage and loss moduli as a function of temperature. From these measurements the position and extension of the glass transition range on the temperature scale is obtained. For heterogeneous emulsion copolymers with two glass transition temperatures the distribution of the carboxylic monomer units in the different copolymer phases can be determined. Electron microscopy of ultra thin cross-sections of stained films gave further insight into the film morphology.The combination of the results obtained with the different methods gives rise to the following clues: In the BA/AA latices about 40% (by weight) of the total AA used in the recipe are found in the serum as a water soluble polymer, about 50% are found to increase the glass transition temperatureT _g of the bulk of the BA copolymer and, therefore, are thought to be incorporated into the interior of the latex particles, and the remaining 10% are, conclusively, located on the particle surface.In the BA/MAA latices no water soluble copolymer could be detected in the serum, about 90% of the MAA used is found in the bulk of the copolymer, and about 10% form a second hard phase on the surface of the latex particles.Dynamic mechanical measurements on the copolymer latex films show at least two phases with different glass transition temperatures: the bulk of the copolymer with a relatively low content of (M)AA units and a glass transition range at low temperatures, and a second (M)AA rich phase with a highT _g.The latter phase forms a honeycomb-like structure surrounding the packed latex particles. That results in a three-dimensional network of polymer with a highT _g extending throughout the latex film. In spite of the fact that this phase is built from a small fraction of the total copolymer only, it has a very pronounced influence on the performance behaviour of latex films.Dedicated to Professor Dr. R. Manecke on the occasion of his 70th birthday.     

电子传输材料1,3,4-哐恶二唑衍生物和1,2,4-三唑衍生物的DFT研究

The simplest organic light-emitting-diode (OLED) device is a two layer device of: ITO/HTL/ETL/Mg: Ag, in which HTL or ETL can act as light emitter. The mobilities of charge are important in optimizing the performance of OLED devices, as high mobilities reduce the resistance of the device leading to greater power efficiency. The electron-transport in the organic solid can be viewed as an electron hopping process. By means of DFT (B3LYP) methods, the structures of two kinds of electron-transport materials in neutral, cationic and anionic states were optimized. The results suggest that the process of electronic transmission of 2,5-diphenyl-1,3,4-oxadiazole is mainly the N→O transferences, the process of electronic transmission of 3,4,5-triphenyl-1,2,4-triazole is mainly the N(double linkage)→N(single linkage) transferences and the transition from the triazole ring to the benzene ring connected with the N atom. The third position of the benzene ring was substituted by the electron acceptor groups, the electronic transmission performance was enhanced, while it was substituted by the electron donor groups, the electronic transmission performance was reduced.     

Semiquantitative analysis of isomeric oligosaccharides by negative-ion mode UV-MALDI TOF postsource decay mass spectrometry and their fragmentation mechanism study at N-acetyl hexosamine moiety

Postsource decay (PSD) spectra of isomeric neutral lactooligosaccharide mixtures were measured from the chlorinated molecules [M + Cl]- by negative-ion mode ultraviolet matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (UV-MALDI TOF MS) to estimate quantitatively the mixing ratios in their mixtures. The PSD ions specific to each isomeric structure were used to distinguish the linkage and branching isomers, and the molar ratios of the isomers were estimated from their ion abundances. The relative ion abundances changed linearly in the PSD spectra of the mixtures of the isomers as their molar ratio was varied in the analyte solutions. Therefore, the molar ratios of the isomers in the analyte mixtures could be estimated semiquantitatively. In addition, we studied their fragmentation mechanisms in N-acetyl hexosamines such as GlcNAc, which enabled us to quantitatively analyze the structures of the isomers of lactooligosaccharides. The conjugated systems elongate in the chemical species of the Z-type fragmentation on the 3-linked GlcNAc owing to the acetoamido groups at the C-2 positions, which made the chemical species of the Z-type ions stable. The glycosyl bonds of the front of GlcNAc cleaved easily as a C-type fragmentation because the negative charge at the anomeric position could be delocalized to the carbonyl oxygen atom at the acetoamido group of GlcNAc. These factors caused the stabilization of the chemical species of the C/Z fragment ions produced by the double cleavage around GlcNAc.     

A PM3 Molecular Orbital Study on the Conformational Equilibrium of Cyclohexane upon α-Cyclodextrin Inclusion Complexation

The effect ofα-cyclodextrin (α-CD) inclusion complexation on the conformational equilibrium of cyclo- hexane wasstudied with thesemiempirical PM3 molecularorbital calculations. The calculation results indicated that the chair form of cyclohexane is 18.5 kJ·mol-1lower than that of boat one in energy, however, theα-cyclodextrin inclusion complex of boat cycl ohexane is 4.4 kJ·mol-1more stable than the complex of chair form. It demon-strated that the conformational equilibrium of cyclohexane was influenced by theα-CD inclusion complexation. Hence, caution should be given when extrapolating the conformational behaviors of the guest compounds in the supramolecular systems totheir free forms, since the interactionsbetween the host and guest significantly affect the conformation of the guest compounds.     

Polymorphism and Conformational Equilibrium of Nitro-Acetophenone in Solid State and under Matrix Conditions

Conformational and polymorphic states in the nitro-derivative of o-hydroxy acetophenone have been studied by experimental and theoretical methods. The potential energy curves for the rotation of the nitro group and isomerization of the hydroxyl group have been calculated by density functional theory (DFT) to estimate the barriers of the conformational changes. Two polymorphic forms of the studied compound were obtained by the slow and fast evaporation of polar and non-polar solutions, respectively. Both of the polymorphs were investigated by Infrared-Red (IR) and Raman spectroscopy, Incoherent Inelastic Neutron Scattering (IINS), X-ray diffraction, nuclear quadrupole resonance spectroscopy (NQR), differential scanning calorimetry (DSC) and density functional theory (DFT) methods. In one of the polymorphs, the existence of a phase transition was shown. The position of the nitro group and its impact on the crystal cell of the studied compound were analyzed. The conformational equilibrium determined by the reorientation of the hydroxyl group was observed under argon matrix isolation. An analysis of vibrational spectra was achieved for the interpretation of conformational equilibrium. The infrared spectra were measured in a wide temperature range to reveal the spectral bands that were the most sensitive to the phase transition and conformational equilibrium. The results showed the interrelations between intramolecular processes and macroscopic phenomena in the studied compound.