硫脲基咪唑啉季铵盐的合成及其缓蚀作用

用戊酸、羊蜡酸、油酸、二乙烯三胺、氯化苄和硫脲为原料,合成了6种咪唑啉季铵盐化合物。 采用静态失重法和极化曲线法,比较了硫脲基烷基咪唑啉型季铵盐和烷基咪唑啉型季铵盐在80 ℃、1 mol/L的HCl溶液中对碳钢的缓蚀性能,研究了这两类缓蚀剂与无机阴离子和阴离子表面活性剂的协同作用。 结果表明,硫脲基烷基咪唑啉季铵盐类的缓蚀效果明显优于烷基咪唑啉季铵盐类,硫脲基羊脂酸咪唑啉缓蚀剂的缓蚀率可达98.3%。 当以羊脂酸、二乙烯三胺、氯化苄和硫脲为原料合成的硫脲基烷基咪唑啉型季铵盐化合物与I-质量比为1∶1复配时,缓蚀效果最佳,比单独使用硫脲基烷基咪唑啉季铵盐化合物的缓蚀率提高了1.5%。     

金属缓蚀剂Gemini型咪唑啉双季铵盐的合成及其性能的研究

合成了系列新型咪唑啉双季铵盐阳离子缓蚀剂（S-HSJ）,研究并讨论了其在5%盐酸介质中对铜、铝等金属的缓蚀性能及缓蚀剂结构中亲油基部分碳链长度、缓蚀时间、缓蚀剂浓度等对缓蚀效果的影响。研究表明：S-HSJ系列咪唑啉双季铵盐对红铜、黄铜、铝及马口铁四种金属均表现出较传统单季铵盐与苯并三氮唑缓蚀剂好的缓蚀性能,S-HSJ-16双季铵盐添加量0.1%时缓蚀效率可达94~99%,S-HSJ与阴离子表面活性剂复配对铜腐蚀表现出明显协同效应。     

新型咪唑啉缓蚀剂的合成与应用

采用苯甲酸、月桂酸、二乙烯三胺和三乙烯四胺为原料,合成了4种咪唑啉季铵盐缓蚀剂,研究了在50℃、体积分数为5%的HCl介质中,咪唑啉季铵盐与阴离子表面活性剂和无机阴离子的协同作用.结果表明,以月桂酸和三乙烯四胺为原料合成的咪唑啉季铵盐与I-质量比为1:1时,缓蚀效果最佳.在不同时间和不同温度下对复合型缓蚀剂的缓蚀率的研究结果表明,缓蚀剂在静态条件下对A3钢的缓蚀率可达99.4%.较之单独使用咪唑啉季铵盐提高了1.1%左右.     

2种癸二酸咪唑啉季铵盐的合成及缓蚀性能评价

合成了2种癸二酸咪唑啉季铵盐癸二酸-水杨酸咪唑啉季铵盐(SSAI)和癸二酸咪唑啉季铵盐(SAI),并采用失重法和电化学方法研究了这2种咪唑啉季铵盐对N80钢在1 mol/L HCl溶液中的缓蚀性能和吸附行为。 结果表明,在1 mol/L HCl溶液中这2种化合物对N80钢均有较好的缓蚀作用,缓蚀效率大小顺序为SSAI＞SAI。 SSAI和SAI均为混合偏阳极型缓蚀剂。 2种化合物在N80钢表面的吸附服从Langmuir吸附等温式,属于化学吸附。     

Gemini型咪唑啉双季铵盐金属缓蚀剂的合成及其性能

合成了系列新型咪唑啉双季铵盐阳离子缓蚀剂(S-HSJ),研究并讨论了其在5%HCl介质中对铜、铁、铝等金属的缓蚀性能及缓蚀剂结构中亲油基部分碳链长度、缓蚀时间、缓蚀剂浓度等对缓蚀效果的影响. 研究表明,S-HSJ系列咪唑啉双季铵盐对红铜、黄铜、铝及马口铁四种金属均表现出较传统单季铵盐与苯并三氮唑缓蚀剂好的缓蚀性能,S-HSJ-16双季铵盐添加量0.1%时缓蚀效率可达94%~99%,S-HSJ与阴离子表面活性剂复配对铜腐蚀表现出明显协同效应.     

芳氧亚甲基咪唑啉季铵盐的合成及缓蚀性能评价

合成了苯氧亚甲基咪唑啉季铵盐（POAI）和萘氧亚甲基咪唑啉季铵盐（NOAI）,通过失重法、电化学方法研究了二者在1 mol/L HCl中对A3钢的缓蚀性能,并对二者在A3钢表面的吸附行为进行了探讨。 结果表明,二者在1 mol/L HCl中对A3钢均有较好的缓蚀作用,其中NOAI对A3钢的缓蚀性能优于POAI的缓蚀性能;两化合物均为混合型缓蚀剂。 缓蚀性能随缓蚀剂浓度和温度的增大而增大;二者在A3钢表面的吸附过程吸热,是化学吸附,符合Langmuir吸附等温式。     

绿色聚天冬氨酸复配缓蚀剂对A3碳钢的缓蚀抑雾作用

采用失重法和极化曲线法研究了聚天冬氨酸(PASP)和十二烷基酚聚氧乙烯醚(OP-10)复配对A3碳钢在6mol·L-1HCl腐蚀介质中的协同吸附行为及缓蚀抑雾作用.结果表明:复配缓蚀剂可有效抑制A3碳钢在HC1介质中的腐蚀,当PASP浓度为20g·L-1,缓蚀率可达94%,抑雾率83%;随着温度的升高,复配缓蚀剂的缓蚀性能下降.复合缓蚀剂在钢表面的吸附符合校正的Langmuir模型,吸附过程为放热、熵减的自发过程;复配体系属于阳极型缓蚀剂.     

咪唑啉衍生物缓蚀剂对碳钢在CO2盐水中的缓蚀机理

采用极化曲线和交流阻抗研究新合成咪唑啉衍生物缓蚀剂对碳钢在饱和CO2盐水中的缓蚀性能和机理. 计算了缓蚀效率和热力学参数. 缓蚀效率随着缓蚀剂浓度增大而增加, 但随着温度增加先增加后降低. 咪唑啉衍生物在碳钢表面的吸附符合Langmuir等温式. 电化学结论由量子化学计算补充说明.     

胡麻籽油咪唑啉类缓蚀剂的制备及其缓蚀性能

以胡麻籽油、羟乙基乙二胺为原料合成咪唑啉中间体,用苄基氯进行改性,得到阳离子咪唑啉衍生物。利用FT IR对合成产物进行了表征,用静态失重法、电化学极化曲线和FESEM对其缓蚀性能进行了评价,并考察了不同缓蚀剂浓度、腐蚀浸泡时间对缓蚀效果的影响,探讨了其在A30钢表面的吸附行为。结果表明,合成的缓蚀剂在盐酸体系中对A30钢有较好的缓蚀性能,在浓度为100mg/L时对低碳钢的缓蚀效率可达87%,并且其产物为阳离子型缓蚀剂,吸附满足Langmuir等温吸附方程。最后采用量子化学方法对其缓蚀剂的缓蚀机理进行了分析。     

胡麻籽油咪唑啉缓蚀剂的制备及其对A30钢的缓蚀效果

以胡麻籽油、羟乙基乙二胺为原料合成咪唑啉中间体,用苄基氯进行改性,得到阳离子咪唑啉衍生物。利用FT IR对合成产物进行了表征,用静态失重法、电化学极化曲线和FESEM对其缓蚀性能进行了评价,并考察了不同缓蚀剂浓度、腐蚀浸泡时间对缓蚀效果的影响,探讨了其在A30钢表面的吸附行为。结果表明,合成的缓蚀剂在盐酸体系中对A30钢有较好的缓蚀性能,在浓度为100mg/L时对低碳钢的缓蚀效率可达87%,并且其产物为阳离子型缓蚀剂,吸附满足Langmuir等温吸附方程。最后采用量子化学方法对其缓蚀剂的缓蚀机理进行了分析。     

Anti-corrosion and anti-microbial evaluation of novel water-soluble bis azo pyrazole derivative for carbon steel pipelines in petroleum industries by experimental and theoretical studies

In this research, we investigated the synthesis of a novel water-soluble bis azo pyrazolin-5-one (ABP) which was synthesized efficiently via the regioselective reaction of hydrazine with coumarin hydrazone (CMH). Also, we evaluate their anti-corrosion and anti-bacterial behavior. The inhibition efficiency of ABP in an acidic medium (1.0 M HCl) was evaluated using various electrochemical and surface morphology measurements. The novel bis pyrazole-based azo dye ABP (16 × 10^?6 M) demonstrated a higher protection capacity (93.3 %). Tafel curves revealed that ABP was a mixed-type inhibitor. The adsorption of ABP on the C-steel (CS) surface is proven by the alteration in (R_ct and C_dl) impedance characteristics and obeyed the Langmuir isotherm model. SEM/EDX, AFM, and XPS surface examinations confirmed the enhancement of an adsorbed film protects the CS surface from acid corrosion at the appropriate dose. Furthermore, theoretical calculations using DFT and MC simulations were performed to identify the active sites on ABP molecules in charge of the adsorption and surface protection of the CS. The adsorption of bis pyrazole-based azo dye on the metal surface explained the protection mechanism. Moreover, the ABP screened for its antimicrobial activity against sulfate-reducing bacteria (SRB), and the calculated inhibition efficiency was 100 %. The current work presents significant results in manufacturing and producing novel water-soluble bis pyrazole-based azo dye derivative with high anti-corrosion and anti-microbial efficiency.     

具有光引发活性腰果酚衍生物的合成及其UV固化

以腰果酚与4-溴甲基二苯甲酮为原料,合成了具有光引发活性的腰果酚衍生物,收率86%。 该衍生物的光引发活性优于普通的二苯甲酮。 在不加其它光引发剂的情况下,UV光照30 s该液体衍生物即可固化。 该衍生物与腰果酚不同比例的混合物,也可进行UV 固化,腰果酚含量越高,所需固化时间越长。膜的硬度为3H-5H,且具有较好的耐溶剂与耐酸碱性能,可望用于防腐漆中。     

缓蚀剂在阳极电泳涂装中的应用

在电泳涂装工艺中使用缓蚀剂，可提高阳极电泳涂层的防腐蚀性，实验表明，沥青电泳漆与缓蚀剂的电泳共沉积涂层对基底金属具有较高的防护性能，探讨了共沉积涂层中缓蚀剂的缓蚀机理。     

苯胺共聚物/环氧共混体系防腐蚀行为的研究

以苯胺与邻甲氧基苯胺为单体,采用水溶液化学氧化聚合法合成了聚苯胺、苯胺共聚物及聚邻甲氧基苯胺,并对其性能与结构进行了测试、表征.实验表明:随着邻甲氧基苯胺含量的增加,聚合物的溶解性能有明显的改善,其氧化程度随之降低;以上三种聚合物均对马口铁表现出良好的防腐蚀性,其防腐蚀能力随氧化程度降低而降低;苯胺共聚物/环氧混合体系对马口铁也表现出优异的抗腐蚀性.     

紫外光-热双固化聚苯胺防腐涂料

以酸性磷酸酯为掺杂剂对本征态聚苯胺(EB)进行掺杂,制备了可在聚氨酯和聚氨酯丙烯酸酯中进行纳米分散的导电聚苯胺(ES),其粒径分布在80~750 nm之间可控。 在此基础上,制备了不含重金属的紫外光-热双固化聚苯胺防腐涂料。 该防腐涂料先后经过3~5 s紫外光固化和80 ℃下1~3 min的热固化,即可完成紫外光-热双固化过程。 由于ES与聚氨酯或聚氨酯丙烯酸酯之间是不相容体系,因此随着ES质量分数的增大,会导致ES的团聚,分散粒径增大。 当ES质量分数从1.0%增大到5.0%时,ES的粒径从80~119 nm增加到500~750 nm。 ES的分散粒径增大会导致防腐涂层的致密性变差,降低防腐效果。 与普通紫外光固化聚苯胺防腐涂层相比,当ES为1.0%时,紫外光-热双固化防腐涂层在质量分数为3.5%的NaCl水溶液中浸泡2160 h后,其0.1 Hz下的绝对阻抗值(|Z|_{0.1 Hz})仍高于1.0×10⁸ Ω·cm²,优于普通紫外光固化聚苯胺防腐涂层的|Z|_{0.1 Hz}(1.0×10⁷ Ω·cm²),表明紫外光-热双固化涂层的防腐效果有了显著改善。 经过500 h划叉中性盐雾试验后,普通紫外光固化防腐涂层的板面出现了锈蚀宽度小于1 mm的锈蚀,而紫外光-热双固化防腐涂层经过500 h划叉中性盐雾试验,板面没有出现生锈、起泡的现象,表明紫外光-热双固化路线对提高涂层的防腐性能具有较大的价值。     

Enhancement inhibition efficiency of PBTCA depending on the inclusion complex with hydroxypropyl-β-cyclodextrin

For the first time, hydroxypropyl-β-cyclodextrin (HP-β-CD) has been brought in to include 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA) in order to enhance inhibition efficiency of PBTCA, which leads a new approach to study oil–gas field corrosion inhibition in the process of acid treatment. Based on the host–guest inclusion reaction, the inclusion complex of PBTCA with HP-β-CD has been prepared in the laboratory. UV–Vis absorption spectrum was applied to study the inclusion behavior of PBTCA with HP-β-CD. The results revealed that PBTCA with HP-β-CD can form a 1:1 stoichiometry inclusion complex. The 1:1 inclusion complex synthesized by using lyophilization was further characterized by Fourier transform infrared spectroscopy. Besides, inhibition effect of the inclusion complex on the corrosion inhibition of Q235 carbon steel has been investigated in 0.1 M sulfuric acid (H₂SO₄) solution using potentiodynamic polarization, electrochemical impedance spectroscopy techniques and scanning electron microscopy (SEM). It was found that the presence of the inclusion complex better achieved the anti-corrosion property in aggressive medium than was the case with alone PBTCA and the highest inhibition efficiency of the inclusion complex over 90 % was obtained, which are suggestive of the active effect of the inclusion complex for improving inhibition efficiency of PBTCA. Meanwhile, the results obtained from SEM further showed that the inclusion complex acts as a more efficient corrosion inhibitor for Q235 carbon steel in H₂SO₄ medium.     

Analytical investigations of poly(acrylic acid) coatings electrodeposited on titanium-based implants: a versatile approach to biocompatibility enhancement

A polyacrylic acid film was synthesized on titanium substrates from aqueous solutions via an electroreductive process for the first time. This work was done in order to develop a versatile coating for titanium-based orthopaedic implants that acts as both an effective bioactive surface and an effective anti-corrosion barrier. The chemical structure of the PAA coating was investigated by X-ray photoelectron spectroscopy (XPS). Scanning electron microscopy (SEM) was employed to evaluate the effect of annealing treatment on the morphology of the coatings in terms of their uniformity and porosity. Inductively coupled plasma mass spectrometry was used to measure ion concentrations in ion release tests performed on Ti-6Al-4V sheets modified with PAA coatings (annealed and unannealed). Results indicate that the annealing process produces coatings that possess considerable anti-corrosion performance. Moreover, the availability and the reactivity of the surface carboxylic groups were exploited in order to graft biological molecules onto the PAA-modified titanium implants. The feasibility of the grafting reaction was tested using a single aminoacid residue. A fluorinated aminoacid was selected, and the grafting reaction was monitored both by XPS, using fluorine as a marker element, and via quartz crystal microbalance (QCM) measurements. The success of the grafting reaction opens the door to the synthesis of a wide variety of PAA-based coatings that are functionalized with selected bioactive molecules and promote positive reactions with the biological system interfacing the implant while considerably reducing ion release into surrounding tissues. Figure Vanadium release from bare Ti-6Al-4V sheets compared with the release from sheets coated with annealed and unannealed electrosynthesised PAA Dedicated to Professor P.G. Zambonin on the occasion of his 72nd birthday.     

Impedance spectroscopic study of corrosion inhibition of Al-Pure by organic Schiff base in hydrochloric acid

A new corrosion inhibitor namely o-Chloroaniline-N-benzylidene (o-CANB) has been synthesized and its inhibitive performance toward the corrosion of Al-Pure in 1.0 M hydrochloric acid has been investigated. Corrosion inhibition was studied by chemical method (weight loss) and electrochemical techniques including polarization method and electrochemical impedance spectroscopy (EIS). The present study has shown that this inhibitor is good in acidic media and the inhibition efficiency up to >99% in 1.0 M HCl. Polarization measurement revealed that the investigated inhibitor is a mixed type with a predominant action on cathode. Impedance measurement showed that the charge transfer resistance (R_ct) increased and double layer capacitance (C_dl) decreased with an increase in the inhibitor's concentration. Obtained results about inhibition efficiency from weight loss, polarization study and EIS are in good agreement with each other. The adsorption of the inhibitor on the metal surface in the acid solution was found to obey Langmuir's adsorption isotherm.     

Synthesis of MA/AA/MA-β-CD/SHP Quadripolymer and Its Performance Evaluation as Scale Inhibitor

A new scale inhibitor MA/AA/MA-β-CD/SHP was prepared from maleic anhydride, acrylic acid, sodium hypophosphite, and MA-β-CD via the method of free radical polymerization in aqueous solution. The MA-β-CD was obtained through the modification of β-cyclodextrin (β-CD) with maleic anhydride (MA). Results of performance evaluation showed that the synthesized copolymer has excellent scale inhibition effect for the calcium scale, and the resistance rate of silicon scale up to 79.81%. The structure, thermal property, and morphology of the copolymer were characterized by FTIR, TGA, and SEM. From crystallization data and morphology of the scale crystals it was found that the copolymer scale inhibitor can make the crystal lattice distortion, and has a good dispersing ability after addition of the scale inhibitor.