胡麻籽油咪唑啉类缓蚀剂的制备及其缓蚀性能

以胡麻籽油、羟乙基乙二胺为原料合成咪唑啉中间体,用苄基氯进行改性,得到阳离子咪唑啉衍生物。利用FT IR对合成产物进行了表征,用静态失重法、电化学极化曲线和FESEM对其缓蚀性能进行了评价,并考察了不同缓蚀剂浓度、腐蚀浸泡时间对缓蚀效果的影响,探讨了其在A30钢表面的吸附行为。结果表明,合成的缓蚀剂在盐酸体系中对A30钢有较好的缓蚀性能,在浓度为100mg/L时对低碳钢的缓蚀效率可达87%,并且其产物为阳离子型缓蚀剂,吸附满足Langmuir等温吸附方程。最后采用量子化学方法对其缓蚀剂的缓蚀机理进行了分析。     

芳氧亚甲基咪唑啉季铵盐的合成及缓蚀性能评价

合成了苯氧亚甲基咪唑啉季铵盐（POAI）和萘氧亚甲基咪唑啉季铵盐（NOAI）,通过失重法、电化学方法研究了二者在1 mol/L HCl中对A3钢的缓蚀性能,并对二者在A3钢表面的吸附行为进行了探讨。 结果表明,二者在1 mol/L HCl中对A3钢均有较好的缓蚀作用,其中NOAI对A3钢的缓蚀性能优于POAI的缓蚀性能;两化合物均为混合型缓蚀剂。 缓蚀性能随缓蚀剂浓度和温度的增大而增大;二者在A3钢表面的吸附过程吸热,是化学吸附,符合Langmuir吸附等温式。     

2种癸二酸咪唑啉季铵盐的合成及缓蚀性能评价

合成了2种癸二酸咪唑啉季铵盐癸二酸-水杨酸咪唑啉季铵盐(SSAI)和癸二酸咪唑啉季铵盐(SAI),并采用失重法和电化学方法研究了这2种咪唑啉季铵盐对N80钢在1 mol/L HCl溶液中的缓蚀性能和吸附行为。 结果表明,在1 mol/L HCl溶液中这2种化合物对N80钢均有较好的缓蚀作用,缓蚀效率大小顺序为SSAI＞SAI。 SSAI和SAI均为混合偏阳极型缓蚀剂。 2种化合物在N80钢表面的吸附服从Langmuir吸附等温式,属于化学吸附。     

多点位吸附型咪唑啉季铵盐缓蚀剂的合成及其缓蚀性能

以对二甲氨基苯甲酸、二乙烯三胺和氯化苄为原料,两步法合成了一种新型具有多个潜在吸附中心的季铵盐型咪唑啉缓蚀剂（MIQ）,利用傅里叶变换红外光谱对合成的产物进行了表征。 通过失重法研究了该缓蚀剂在6%盐酸溶液中对碳钢的缓蚀性能。 讨论了缓蚀剂用量、温度、时间对缓蚀性能的影响,并研究了其与某些物质复配后的协同作用。 结果表明,合成的季铵盐型咪唑啉缓蚀剂在6%的盐酸腐蚀环境中,用量为0.5%时对碳钢的缓蚀率可达97%以上,缓蚀率随温度的升高和时间的延长而降低。 MIQ与乌洛托品、KSCN以及KI等复配后可以显著改善缓蚀剂的缓蚀率。 从吸附等温线推测,该缓蚀剂抑制腐蚀的机理是缓蚀剂在碳钢表面吸附成膜,进而有效阻挡了碳钢表面与酸性清洗试剂的接触。     

分子结构对咪唑啉缓蚀剂膜在Q235钢表面生长和衰减规律的影响

采用弱极化法、电化学阻抗谱等手段研究了烷基咪唑啉和硫脲基烷基咪唑啉缓蚀剂对Q235钢在饱和CO2盐溶液中的缓蚀行为变化, 探讨了吸附膜的形成与衰减规律. 结果表明, 烷基咪唑啉和硫脲基烷基咪唑啉缓蚀剂都是以控制阳极过程为主的混合界面型缓蚀剂. 在85 ℃下, 烷基咪唑啉成膜相对较慢, 吸附能力较弱, 容易发生脱附; 而硫脲基的引入, 使得硫脲基烷基咪唑啉缓蚀剂溶液存在自动修复能力, 增强了咪唑啉环的吸附性能, 提高了缓蚀剂的缓蚀性能; 硫脲基烷基咪唑啉水解开环后, 成膜性能下降, 膜寿命和缓蚀效率也大大降低. 最后采用量子化学计算对上述结论进行了验证和解释.     

咪唑啉衍生物缓蚀剂对碳钢在CO2盐水中的缓蚀机理

采用极化曲线和交流阻抗研究新合成咪唑啉衍生物缓蚀剂对碳钢在饱和CO2盐水中的缓蚀性能和机理. 计算了缓蚀效率和热力学参数. 缓蚀效率随着缓蚀剂浓度增大而增加, 但随着温度增加先增加后降低. 咪唑啉衍生物在碳钢表面的吸附符合Langmuir等温式. 电化学结论由量子化学计算补充说明.     

新型咪唑啉缓蚀剂的合成与应用

采用苯甲酸、月桂酸、二乙烯三胺和三乙烯四胺为原料,合成了4种咪唑啉季铵盐缓蚀剂,研究了在50℃、体积分数为5%的HCl介质中,咪唑啉季铵盐与阴离子表面活性剂和无机阴离子的协同作用.结果表明,以月桂酸和三乙烯四胺为原料合成的咪唑啉季铵盐与I-质量比为1:1时,缓蚀效果最佳.在不同时间和不同温度下对复合型缓蚀剂的缓蚀率的研究结果表明,缓蚀剂在静态条件下对A3钢的缓蚀率可达99.4%.较之单独使用咪唑啉季铵盐提高了1.1%左右.     

新型不对称双季铵盐缓蚀剂在HCl中对Q235钢的缓蚀行为

采用静态失重法、极化曲线法和交流阻抗法研究了自制的含咪唑啉环不对称双季铵盐缓蚀剂(DBA)在1 mol•L^－1 HCl介质中对Q235钢的缓蚀性能, 并探讨了其在Q235钢表面的吸附行为. 结果表明, 缓蚀效率随DBA浓度增加而增大, 在25～55 ℃的实验温度范围内, 浓度为2.89×10^－4 mol•L^－1时, 缓蚀效率均在90%以上, 且缓蚀效率随温度升高而增大. 极化曲线测试显示DBA是一种阴极抑制为主的混合型缓蚀剂. 缓蚀剂在Q235钢表面的吸附过程为吸热过程, 其在Q235钢表面的吸附遵循Langmuir等温式, 属于化学吸附. 最后采用量子化学方法对DBA的缓蚀机理做了进一步分析.     

新型咪唑啉化合物在H_2S/CO_2共存条件下对Q235钢的缓蚀性能

合成了一种新型咪唑啉化合物1-(2-氨基-硫脲乙基)-2-十五烷基-咪唑啉(IM-S),并通过失重法、电化学方法及扫描电镜等研究了IM-S在H2S/CO2共存条件下对Q235钢的缓蚀性能,探讨了其在Q235钢表面的吸附行为.结果显示,IM-S具有较好的抗H2S、CO2腐蚀能力,能同时抑制碳钢腐蚀的阴、阳极反应过程,最高缓蚀效率可达92.74%.缓蚀剂在Q235钢表面呈单分子层吸附,属于以化学吸附为主的混合吸附.最后采用量子化学方法对IM-S的缓蚀机理做了进一步分析.     

改性咪唑啉类缓蚀剂缓蚀机理的分子模拟

基于密度泛函理论和分子动力学分别研究了油酸咪唑啉(C17)、季铵化改性咪唑啉(QI)和环氧乙烷改性咪唑啉(EOI)的反应活性、吸附方式、吸附强度和最优吸附构型,揭示了3种缓蚀剂的缓蚀机理.结果表明:3种缓蚀剂分子的反应活性区域主要分布在咪唑环、头基的N原子以及苯环上;3种缓蚀剂分子的缓蚀能力大小为QIEOIC17;根据缓蚀剂与金属成键原子态密度可知,咪唑环中N原子的s轨道和p轨道与Cu原子的d轨道发生杂化耦合,形成化学键.本文评价了3种咪唑啉类缓蚀剂的缓蚀性能,明确了咪唑啉类缓蚀剂的缓蚀机理,提供了一种高效的缓蚀剂设计、评价和筛选思路.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.