顶空气相色谱-质谱联用技术的应用进展

顶空分析作为一种无有机溶剂萃取的样品处理技术,通常与气相色谱-质谱（GC-MS）技术结合用来分析复杂基质中的挥发性有机物。顶空气相色谱-质谱（HS-GC-MS）技术具有快速、高效、环保、灵敏度高等特点,在常规分析中发挥着重要作用。该文简要概述了静态顶空、动态顶空、顶空固相微萃取分析以及GC-MS联用技术,并介绍了整个顶空分析系统的影响因素和优化过程。根据基质类型的分类,综述了HS-GC-MS在食品和饮料、环境、生物等样品中的应用实例。HS-GC-MS的研究非常活跃,不断出现新应用,在分析挥发性有机物方面具有广阔前景。     

A New Cell for Single Sided Headspace Sampling and Evaluation of Barrier Function in Laminated Paperboard

A new cell for single sided headspace sampling has been developed for the analysis of volatile organic compounds from food packaging paperboard and laminated paperboard. The cell, which samples the volatile organic compounds over a selected surface, is useful for determining the barrier function of laminated paperboards with respect to volatile compounds. The analysis of volatile organic compounds is carried out by purge and trap capillary gas chromatography in combination with mass spectrometric detection and compound identification. The new sampling cell was constructed to facilitate specific analysis of organic compounds from only one side of a laminated paperboard. The construction and the operating principles of the new sampling device are described. The repeatability of the single sided headspace procedure was found to be quite good. Relative standard deviations of about 5–7% were obtained for the major compounds quantified in replicate headspace analyses of a laminated paperboard. The volatile compounds released from the inner side of a food packaging paperboard sample with different surface composition on the two sides were determined. The barrier function against volatile organic compounds of some laminated paperboards was investigated employing the new headspace cell.     

顶空-气相色谱法进展

回顾了顶空采样气相色谱分析法在复杂基质中挥发性成分中的应用．总结并详述了顶空分析的三种重要模式-介绍了顶空分析的相关原理和整个顶空分析系统的参数优化过程．综述了顶空．气相色谱分析在生物样本中挥发性有机物的测定、药品中有机残留溶剂的检测、聚合材料中挥发性有机物的分析、环境中有害的有机挥发性物质分析、挥发油分析和烟草分析等方面的进展．     

Comparison of Liquid–Liquid Extraction,Simultaneous Distillation Extraction,Ultrasound-Assisted Solvent Extraction,and Headspace Solid-Phase Microextraction for the Determination of Volatile Compounds in Jujube Extract by Gas Chromatography/Mass Spectrometry

Jujube extract has a unique flavor that has been used as a common fragrance due to the volatile compounds. In this study, the volatiles of jujube extract were isolated by liquid–liquid extraction, simultaneous distillation extraction, ultrasound-assisted solvent extraction, and headspace solid-phase microextraction, and analyzed by gas chromatography–mass spectrometry. Altogether 92 compounds were identified by the four methods, of which 53 components were identified for the first time; however, only 21 compounds were identified by all these methods. The performance characteristics of the four pretreatment techniques were compared by principal component analysis which showed that the volatile compounds obtained by liquid–liquid extraction and ultrasound-assisted solvent extraction were similar both in categories and in content; whereas, the volatiles extracted by simultaneous distillation extraction, ultrasound-assisted solvent extraction, and headspace solid-phase microextraction greatly varied. The results indicated that a multi-pretreatment technique should be adopted in order to obtain the most complete information about the volatile compounds in jujube extract. The ultrasound-assisted solvent extraction method exhibited excellent repeatability and recoveries, and was very suitable for quantitative analysis. Although the recoveries and reproducibility of headspace solid-phase microextraction were inferior to the other methods, it was more sensitive than other methods.     

Analysis of organic compounds in environmental samples by headspace solid phase microextraction

The analysis of samples contaminated by organic compounds is an important aspect of environmental monitoring. Because of the complex nature of these samples, isolating target organic compounds from their matrices is a major challenge. A new isolation technique, solid phase microextraction, or SPME, has recently been developed in our laboratory. This technique combines the extraction and concentration processes into one step; a fused silica fiber coated with a polymer is used to extract analytes and transfer them into a GC injector for thermal desorption and analysis. It is simple, rapid, inexpensive, completely solvent-free, and easily automated. To minimize matrix interferences in environmental samples, SPME can be used to extract analytes from the headspace above the sample. The combination of headspace sampling with SPME separates volatile and semi-volatile analytes from non-volatile compounds, thus greatly reducing the interferences from non-target compounds. This paper reports the use of headspace SPME to isolate volatile organic compounds from various matrices such as water, sand, clay, and sludge. By use of the technique, benzene, toluene, ethyl-benzene, and xylene isomers (commonly known as BTEX), and volatile chlorinated compounds can be efficiently isolated from various matrices with good precision and low limits of detection. This study has found that the sensitivity of the method can be greatly improved by the addition of salt to water samples, water to soil samples, or by heating. Headspace SPME can also be used to sample semi-volatile compounds, such as PAHs, from complex matrices.     

Developmental variation in floral volatiles composition of a fragrant orchid Zygopetalum maculatum (Kunth) Garay

Emitted scent volatile profile of an orchid species Zygopetalum maculatum was studied using dynamic headspace sampling technique with four different adsorbent matrices, namely Porapak Type Q polymer (mesh size: 80/100), Tenax (mesh size: 60/80), activated charcoal and graphite. In addition, developmental variations in scent emissions and endogenous volatile levels were also investigated. Gas chromatography-mass spectrometry analysis revealed the presence of 21 volatile compounds in the headspace, which was predominantly enriched with benzenoid compounds. Among these benzenoids, o-diethylbenzene and p-diethylbenzene were the major compounds followed by benzyl acetate and methyl salicylate. Among the phenylpropanoid compounds, 2-phenylethyl acetate was the major volatile. However, as compared to benzenoids, the quantity was much lesser, indicating the inclination of phenylalanine flux towards benzenoid pathway. The outcome of this study has the implications in enhancing fragrance and vase life of orchids of the Sikkim Himalaya region and thus may further help to meet the growing market demand.     

Low‐temperature headspace‐trap gas chromatography with mass spectrometry for the determination of trace volatile compounds from the fruit of Lycium barbarum L.

The total saccharides content of Lycium barbarum L. is very high, and a high temperature would result in saccharide decomposition and the emergence of a large amount of water. Moreover, the volatile compounds from the fruit of L. barbarum L. are rather low in concentration. Hence, it is difficult for a conventional headspace method to study the volatile compounds from the fruit of L. barbarum L. Since headspace‐trap gas chromatography with mass spectrometry is an excellent method for trace analysis, a headspace‐trap gas chromatography with mass spectrometry method based on low‐temperature (30°C) enrichment and multiple headspace extraction was developed to explore the volatile compounds from the fruit of L. barbarum L. The headspace of the sample was extracted in 17 cycles at 30°C. Each time, the compounds extracted were concentrated in the trap (Tenax TA and Tenax GR, 1:1). Finally, all the volatile compounds were delivered into the gas chromatograph after thermal desorption. With the method described above, a total of 57 compounds were identified. The identification was completed by mass spectral search, retention index, and accurate mass measurement.     

Alysis of the volatile constituents of food by headspace GC-MS with reversal of the carrier gas flow during sampling

A technique has been developed for performing headspace GC-MS analysis of volatile components of food, in which the carrier gas flow is reversed during sampling in order to overcome problems caused by the diffusion of substances not retained by the cold trap. Chromatographic profiles of volatile compounds from cheeses, obtained at room temperature, provide confirmation of the validity of the reversed flow technique, and the versatility of the system is evidenced by its successful application to both solid and liquid matrixes: the absence of any discrimination against the various components reveals its efficacy for compounds with a wide range of volatility. Addition of internal standards to the sample enables the use of the technique for quantitative analysis.     

顶空气相色谱法测定化妆品中15种挥发性有机溶剂残留

建立了化妆品中15种挥发性有机溶剂残留的顶空气相色谱测定方法。样品经60 ℃、30 min静态顶空后,采用气相色谱-氢火焰离子化检测器进行检测,外标法定量。加标回收试验结果表明: 15种挥发性有机溶剂残留平均回收率为62.8%～116%,相对标准偏差均小于5%。方法的检出限为0.09～0.68 mg/kg。该方法可有效克服基体干扰,一次进样可同时分离和测定化妆品中15种挥发性有机溶剂,准确灵敏,简单快速,适用于化妆品中挥发性有机溶剂残留的检测。     

Speciation of Volatile Selenium Species in Plants Using Gas Chromatography/Inductively Coupled Plasma Mass Spectrometry

 Gas chromatography/inductively coupled plasma mass spectrometry (GC/ICP MS) coupled with solid phase micro extraction can provide a simple, extremely selective and sensitive technique for the analysis of volatile sulfur and selenium compounds in the hea     

气相色谱/电感耦合等离子体质谱测定植物中挥发性硒化合物

Severalinstrumentalmethodscanbeusedforthedetectionanddeterminationofvolatileselenium(Se)andsulfur (S)compounds .Theserelyprimari lyongaschromatography (GC)forseparationanddifferentdetectiontechniques ,includingatomice missiondetection (AED ) ,massspectrom…     

Analysis of volatile organic compounds in polymers by dynamic headspace and gas chromatography/mass spectrometry

An experimental method for the analysis of volatile organic compounds in polymers is described. The technique involves dynamic headspace sampling, collection, and concentration of the volatiles in a cold trap, followed by capillary column gas chromatography/mass spectometry. Flow switching is carried out by the Deans switching technique. Four technical polymers used as pharmaceutical packaging materials have been analyzed in order to demonstrate the method.     

Headspace Single-Drop Microextraction with Gas Chromatography for Determination of Volatile Halocarbons in Water Samples

A simple, rapid and inexpensive procedure for extraction and analysis of volatile halocarbons in water samples was presented using the headspace single-drop microextraction (HS-SDME) technique and gas chromatography with microcell electron capture detector (GC-μECD). Operation parameters. such as extraction solvent. headspace volume. organic drop volume. salt concentration. temperature and sampling time, were studied and optimized. Extraction of 10 volatile halocarbon compounds was achieved using the optimized method. Calibration curves of 10 target compounds yielded good linearity in the respective range of concentration (R ² ≥ 0.9968, chlorodibromomethane in the concentration range of 0.05–50 μg/L). The limits of detection were found between 0.002 (tetrachloroethene) and 0.374μg/L (1,1,2-trichloroethane). and relative standard deviations (RSD%) ranged between 4.3 (chloroform) and 9.7% (1,1,2,2-tetrachloroethane). Spiked recoveries of tap water and ground water agreed well with the known values between 118.97 (20.0μg/L of 1,1,2-trichloroethane) and 82.61% (10.0μg/L of tetrachloroethene), demonstrating that the HS-SDME combined GC-μECD was a useful and reliable technique for the rapid determination of volatile halocarbon compounds in water samples.     

Dynamic headspace analysis of solid waste materials

A dynamic headspace stripping technique for the extraction of volatile organic compounds has been applied to a variety of solid and semisolid waste materials. A simple glass apparatus accommodates a wide range of sample sizes and allows for the volatiles to be stripped at elevated temperatures. Concentration on Tenax, followed by thermal desorption and analysis by fused silica capillary gas chromatography provides detailed information on the volatile content of waste samples of widely differing matrix composition.     

Determination of partition coefficients by automatic equilibrium headspace gas chromatography by vapor phase calibration

Summary Equilibrium headspace gas chromatography has been applied to the determination of the partition coefficients of volatile compounds in water-air systems. Only techniques that are suited to a fully automatic headspace procedure using the pneumatic headspace sampling-technique have been considered. Particularly simple is the technique of vapor phase calibration —VPC where an external vapor standard is used to calibrate the concentration of the volatile analyte in the headspace, while the concentration in the sample is found from the difference in the total amount in the vial. This technique is described in detail for 2-butanone in water. Finally, the water-air partition coefficients of several selected volatile compounds at different temperatures are listed together with their temperature functions.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

Enhancing the Sensitivity of Full Evaporation Technique Using Multiple Headspace Extraction Analysis

This article reports on the development of a new full evaporation (FE) headspace technique based on multiple headspace extraction (MHE). Using multiple headspace extraction procedures, the sample volume used in the headspace can be dramatically increased, thereby significantly enhancing the sensitivity. The technique was applied to the quantification of ethanol. The results showed that up to 0.2 mL of ethanol solution can be used in full evaporation HS-GC analysis by adding multiple headspace extraction procedures. The sensitivity for ethanol content was ten times higher than that in conventional full evaporation HS-GC measurement without using multiple headspace extraction procedures. The present MHE-FE headspace analytical technique is accurate and automated and has great potential for the application in determining volatile analytes in aqueous samples.     

Cryogenic oven-trapping gas chromatography for analysis of volatile organic compounds in body fluids

Cryogenic oven-trapping (COT) with capillary GC has been successfully applied to analysis of chloroform, dichloromethane, trichloroethylene, diethyl ether, the components of solvent thinner (ethyl acetate, benzene, n-butanol, toluene, and others), xylene isomers, cyanide, ethanol, hexanes, general anesthetics, and styrene in human body fluids. This COT-GC technique was compared with headspace solid-phase microextraction (SPME) coupled with GC for some volatile organic compounds (VOC); for all compounds compared the sensitivity achieved using COT-GC was more than ten times higher than for headspace SPME-GC. The COT-GC method is recommended for widespread use in forensic and environmental toxicology, because it is simple, requires no special GC operations, and yet enables high sensitivity and high resolution.     

Comparison of four extraction methods for analysis of volatile hop‐derived aroma compounds in beer

The volatile organic compound profile in beer is derived from hops, malt, yeast, and interactions between the ingredients, making it very diverse and complex. Due to the range and diversity of the volatile organic compounds present, the choice of the extraction method is extremely important for optimal sensitivity and selectivity. This study compared four extraction methods for hop‐derived compounds in beer late hopped with Nelson Sauvin. Extraction capacity and variation were compared for headspace solid‐phase micro extraction, stir bar sorptive extraction, headspace sorptive extraction, and solvent‐assisted flavor evaporation. Generally, stir bar sorptive extraction was better suited for acids, headspace sorptive extraction for esters and aldehydes, while headspace solid‐phase microextraction was less sensitive overall, extracting 40% fewer compounds. Solvent‐assisted flavor evaporation with dichloromethane was not suitable for the extraction of hop‐derived volatile organic compounds in beer, as the profile was strongly skewed towards alcohols and acids. Overall, headspace sorptive extraction is found to be best suited, closely followed by stir bar sorptive extraction.     

Rapid removal of selected volatile organic compounds from gaseous mixtures using a new dispersive vapor extraction technique: A feasibility study

A new dispersive vapor extraction (DVE) technique for rapid removal of selected volatile organic compounds (VOCs) from gaseous mixtures was investigated. In this technique, less than 1.0 mL of a volatile solvent was vaporized for 8 min in a 250-mL flask containing a gaseous mixture. The flask was then cooled under running tap water for 2-3 min to induce condensation of the vapor and co-extraction of the VOCs from the headspace. The technique was tested over a concentration range of 4-23 ppb, and resulted in extraction efficiencies ranging from 80 to 97% for the VOCs tested. Because of its simplicity and the relatively short sampling time, DVE could potentially lead to high sample throughput and rapid air analysis.     

Solid phase microextraction ion mobility spectrometer interface for explosive and taggant detection

Ion mobility spectrometry (IMS) is a rugged, inexpensive, sensitive, field portable technique for the detection of organic compounds. It is widely employed in ports of entry and by the military as a particle detector for explosives and drugs of abuse. Solid phase microextraction (SPME) is an effective extraction technique that has been successfully employed in the field for the pre-concentration of a variety of compounds. Many organic high explosives do not have a high enough vapor pressure for effective vapor sampling. However, these explosives and their commercial explosive mixtures have characteristic volatile components detectable in their headspace. In addition, taggants are added to explosives to aid in detection through headspace sampling. SPME can easily extract these compounds from the headspace for IMS vapor detection. An interface that couples SPME to IMS was constructed and evaluated for the detection of the following detection taggants: 2-nitrotoluene (2-NT), 4-nitrotoluene (4-NT), and 2,3-dimethyl-2,3-dinitrobutane (DMNB). The interface was also evaluated for the following common explosives: smokeless powder (nitrocellulose, NC), 2,4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT), 2,4,6-trinitrotoluene (2,4,6-TNT), hexahydro-1,3,5-trinitro-s-triazine (RDX), and pentaerythritol tetranitrate (PETN). This is the first peer reviewed report of a SPME-IMS system that is shown to extract volatile constituent chemicals and detection taggants in explosives from a headspace for subsequent detection in a simple, rapid, sensitive, and inexpensive manner.