Determination of Herbicides in Soil by Dispersive Solid-Phase Extraction,Dispersive Liquid–Liquid Microextraction,and High-Performance Liquid Chromatography

A method for determination of five herbicides (i.e., quinclorac, metsulfuron-methyl, bensulfuron-methyl, atrazine, prometryn) in soil was developed by dispersive solid-phase extraction combined with dispersive liquid–liquid microextraction and high-performance liquid chromatography. The analytes were removed from the soil by liquid partitioning with acetonitrile/5% acetic acid, purified using a octadecylsilane sorbent, and subsequently extracted before chromatographic analysis. Under the optimized conditions, the linear dynamic range was from 10.0 to 300 ng g^?1 with correlation coefficients (r) between 0.9971 and 0.9985. The limits of detection were between 1.5 and 3.1 ng g^?1, with relative standard deviations from 3.8% to 6.7% (n = 5). The recovery of the herbicides from soil at fortification levels of 20.0 and 100.0 ng g^?1 were between 71.5% and 94.3%. The method was successfully applied to the determination of the analytes in soil.     

Liquid–Liquid Equilibria for Extraction of Citrus Essential Oil Using Ionic Liquids

The object of this study was to measure the liquid–liquid equilibria (LLE) data of binary mixtures containing ionic liquids and citrus essential oil. We investigated linalool as the citrus essential oil, and 1-alkyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C _n MIM]⁺[TFSI]^?) as the ionic liquid. Firstly, the experimental apparatus and procedure for the LLE measurement of mixtures containing ionic liquids were verified by measuring the LLE of the binary mixture 1-hexyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C₆MIM]⁺[TFSI]^?) + 1-hexanol as a reference test system recommended by Marsh et al. (Pure Appl Chem 81:781–789, 2009). Next, the LLE data for IL + linalool were obtained, and the LLE data of two binary mixtures 1-butyl-3-methyl-imidazolium bis(trifluoromethanesulfonyl)imide ([C₄MIM]⁺[TFSI]^?) or [C₆MIM]⁺[TFSI]^? + linalool were determined. The experimental LLE data were satisfactorily represented by the non-random two-liquid model.     

Enantioseparation of Dioxopromethazine Hydrochloride in Urine with Liquid–Liquid Extraction by CE-ECL Detection

Capillary electrophoresis coupled with electrochemiluminescence detection was developed for the separation and determination of dioxopromethazine hydrochloride (DPZ) enantiomers. Performance parameters of the proposed method were evaluated. An improved separation of DPZ enantiomers could be achieved after adding boric acid to buffer. The enantiomers were completely separated with running buffer of 16.5 mM β-CD in 25 mM tris-H₃PO₄–40 mM H₃BO₃ at pH 2.5. The proposed method was successfully applied to the separation and determination of DPZ enantiomers in human urine with a liquid–liquid extraction procedure.     

Ionic Liquid–Liquid Extraction and Supported Liquid Membrane Analysis of Lipophilic Wood Extractives from Dissolving-Grade Pulp

In this study, the extraction of lipophilic wood extractives from dissolving pulp samples using ionic liquid–liquid extraction and a two phase hollow fibre supported liquid membrane was investigated. Ionic liquids are capable of dissolving a range of organic and polymeric compounds and are biodegradable, with a negligible vapour pressure. Pulp samples were dissolved in a suitable amount of molten 1-butyl-3-methylimidazolium chloride to give 5 % cellulose solution. Pure cellulose was regenerated by adding water and filtered off. The ionic liquid-aqueous filtrate was first extracted for lipophilic extractives using liquid–liquid extraction. Then, a two phase hollow fibre supported liquid membrane extraction of lipophilic extractives was performed to extract the derivatized compounds prior to analysis by gas chromatography mass spectrometry. The operational parameters of this sample preparation approach were optimised using sterols and fatty acid methyl esters. The variation of enrichment factors and extraction efficiency with respect to liquid membrane, extraction time, stirring speed and sample pH were observed and used to get the optimal parameters. The approach was used in the analysis of oxygen bleached dissolving pulp samples in which main compounds identified were fatty acids, sterols, fatty alcohols, steroid hydrocarbons and ketones. These compounds were similar to those obtained using molecular solvent extraction method, which indicated the absence of chemical reaction between extractives and ionic liquid used.

     

Liquid–Liquid Extraction of Organic Compounds into a Single Drop of the Extractant: Overview of Reviews

Single-drop microextraction (SDME) and hollow-fiber membrane microextraction (HFME) belong to methods of the liquid-phase microextraction preconcentration of organic compounds. These methods are characterized by the low consumption of organic solvents, high preconcentration factors, simplicity, low cost, ease of combination with various chromatographic methods; processes of preconcentration and sample injection are combined in a single device. Since the emergence of SDME (1996) and HFME (1999), a large number of versions have been developed that differ in the preconcentration technique, nature of the extractants used, and combinations with methods for the subsequent determination of the preconcentrated substances. The popularity of these methods among the analysts is evidenced by many reviews that we have summarized in this publication.

     

Solid Supported Liquid–Liquid Extraction of Chemical Warfare Agents and Related Chemicals from Water

Solid-supported liquid–liquid extraction was optimized to extract the chemical warfare agents and their non-toxic analogues from water. The developed method was compared to the conventionally used liquid–liquid extraction. This method yielded high recoveries (70–80%) of non-toxic analogues of chemical warfare agents and good recoveries (65–75%) of the nerve agent sarin and Lewisite-III. The limits of detection of non-toxic analogues of CWAs, and toxic sarin and Lewisite-III, in selected ion monitoring and full scan mode, varied from 0.01 to 0.5 μg mL^?1 and 0.1 to 1.0 μg mL^?1 respectively.     

Liquid Extraction of Noble Metal Ions with an α-Amino Phosphonate

The extraction of Au(III), Pt(IV), and Pd(II) ions from aqueous hydrochloric acid solutions with solutions of bis(2-ethylhexyl) N-butyl-N-octylaminomethylphosphonate in chloroform and xylene was studied. The recovery of the noble metal ions is the most efficient at low acidities of the aqueous solution, with a high selectivity of separation from the concomitant Fe(III), Cu(II), Ni(II), and Co(II) ions.     

Spectrophotometric Determination of Copper in Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of copper in waste water is described. The procedure is based on the formation of an ion-pair between tetrabutylammonium and the tetrathiocyanatocuprate(II) anion. This ion-pair is extracted with chloroform, and the absorbance of the organic phase is measured at 485nm. Concentrations of copper 0.4mg L^–1 can be detected with a linear application range of between 0.5 and 25mg L^–1, a relative standard deviation of 2.3% (0.8mg L^–1, n=10) and a sampling frequency of 30h^–1. Under the proposed working conditions, only Ni(II) and Pd(II) interfere at molar ratios Ni(II)/Cu(II) 50 and Pd(II)/Cu(II) 100.     

Enhancing Metal Separations by Liquid–Liquid Extraction Using Polar Solvents

The less polar phase of liquid–liquid extraction systems has been studied extensively for improving metal separations; however, the role of the more polar phase has been overlooked for far too long. Herein, we investigate the extraction of metals from a variety of polar solvents and demonstrate that, the influence of polar solvents on metal extraction is so significant that extraction of many metals can be largely tuned, and the metal separations can be significantly enhanced by selecting suitable polar solvents. Furthermore, a mechanism on how the polar solvents affect metal extraction is proposed based on comprehensive characterizations. The method of using suitable polar solvents in liquid–liquid extraction paves a new and versatile way to enhance metal separations.     

Liquid–Liquid–Liquid Micro Extraction Combined with CE for the Determination of Rare Earth Elements in Water Samples

A simple method for determination of rare earth elements (REEs) by liquid–liquid–liquid microextraction (LLLME) coupled with capillary electrophoresis and ultraviolet technique was developed. In the LLLME system, 40 mmol L^?1 4-benzoyl-3-methy-1-phenyl-5-pyrazolinone (PMBP) acted as extractant and 4% (v/v) formic acid was used as back-extraction solution. The parameters influencing the LLLME, including the type of the organic solvent, sample pH, formic acid concentration, PMBP concentration, extraction time, volume of organic solvent, stirring rate and phase volume ratio, were investigated. Under the optimized conditions, the detection limits (S/N = 3) of REEs were in the range of 0.19–0.70 ng mL^?1. The developed method was successfully applied to the determination of trace amounts of REEs in water samples.     

Dispersive Liquid–Liquid Extraction Based on Freezing of the Organic Drop, Followed by GC for the Determination of Methyl Methacrylate in Wastewater

Crude oil reservoirs typically contain more water than oil, which is emulsified with the oil. During oil production, the emulsion is broken with demulsifiers. Most recently, based on methyl methacrylate, after which, the water, containing the methyl methacrylate, is discharged into surface waters. Significant health hazards have been associated with methyl methacrylate, and a limit of 30 ppm in ground waters has been established. This paper describes the preconcentration of methyl methacrylate from the separated water, using dispersive liquid–liquid microextraction, followed by freezing of the organic drop in an ice bath which facilitated separation of the phases (by centrifugation). In the optimized method, 15.0 μL of 2-dodecanol was rapidly injected into 5 mL water samples, followed by stirring, freezing, and decantation, then direct injection into the gas chromatograph equipped with a flame ionization detector. The method was optimized for: choice of extraction solvent, volume of extraction solvent, pH, ionic strength, temperature and extraction time.     

Magnetic Solid-Phase Extraction and Ionic Liquid Dispersive Liquid–Liquid Microextraction Coupled with High-Performance Liquid Chromatography for the Determination of Hexachlorophene in Cosmetics

An efficient, simple, and fast method based on ionic liquid dispersive liquid–liquid microextraction (IL-DLLME) followed by magnetic solid-phase extraction (MSPE) was developed as a new technique for extracting and purifying hexachlorophene (HCP) in cosmetics prior to high-performance liquid chromatography (HPLC) determination. In this method based on IL-DLLME and MSPE, 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) is used as the extraction solvent and Fe₃O₄ nanoparticles are used to remove hydrophobic additives in the cosmetics by physical adsorption. The main parameters affecting the efficiency of the IL-DLLME and MSPE of HCP were investigated and optimized. Under the optimum conditions, the method was linear in the range 0.5–40 µg mL^?1 with a correlation coefficient (R ²) of 0.9976 and had a detection limit of 0.14 µg mL^?1 at a signal-to-noise ratio (S/N) of 3. The recoveries of HCP in three cosmetic samples using the proposed method were in the range 74.5–97.7%, and the relative standard deviations (RSD, n = 5) were in the range 3.8–6.7%. The developed method was successfully applied to the determination of HCP in cosmetics.     

Reverse Homogeneous Liquid–Liquid Extraction as a Miniaturized Method for Extraction of Aflatoxins from Pistachio and Wheat and LC Post-column Derivatization-Fluorescence Detection

A rapid and simple quantitative method for the simultaneous determination of the four aflatoxins (AFs) B1, B2, G1 and G2 was developed using reverse homogeneous liquid–liquid extraction (RHLEE) and HPLC post-column derivatization-fluorescence (HPLC-FL) detection. The method based on the rapid extraction of AFs from a methanolic sample into chloroform after addition of water containing KBr, with a method we called reverse homogeneous liquid–liquid extraction. Recoveries were in the range of 88–125% and the limits of detection were between 0.001–0.042 ng g^?1 for different AFs. Wheat and pistachio were chosen for the analysis of real samples and the method was also successfully applied to a FAPAS^® TEST MATERIAL (T04151).     

Rapid Extraction of Imidacloprid in Tomatoes by Ultrasonic Dispersion Liquid–Liquid Microextraction Coupled with LC Determination

A simple method for the extraction and determination of trace imidacloprid in tomatoes was developed using ultrasonic dispersion liquid–liquid microextraction coupled with liquid chromatographic separation. An ultrasonic dispersion process was applied to accelerate the formation of the fine cloudy solution without using disperser solvents, which was markedly increased the extraction efficiency and reduced the equilibrium time. The results revealed that tetrachloroethane as extraction solvent could be directly applied to the filtered tomato juice with the assistance of ultrasonic dispersion. Under the optimum condition, the enrichment factor of imidacloprid could reach 375 folds and the average recovery of samples ranged from 87.6 to 110% with RSD less than 4.5% (n = 3). Compared to the conventional sample pretreatment method, the proposed method had the advantage of short time, simple operation, high sensitivity and low consumption of organic solvent.     

Determination of Iron in Tap and Waste Water Using Liquid–Liquid Extraction in a Flow-Injection System

A flow-injection procedure for the determination of iron(III) in water is described. The procedure is based on the formation of an ion pair between the tetraphenylarsonium (Ph₄As⁺) (TPA) or tetrabutylammonium (But₄N⁺) (TBA) cations and the tetrathiocyanatoferrate(III) complex (TTF). This ion pair is extracted with chloroform, and the absorbance of the organic phase is measured at 503nm (for Ph₄As⁺) or 475nm (for But₄N⁺). Iron concentrations higher than 0.9×10^–6molL^–1 (50µgL^–1) can be detected in the first case, with a relative standard deviation of 1.9% (n=12), a linear application rangeof between 1.34 and 54.0×10^–6molL^–1 (75–3015µgL^–1), and a sampling frequency of 30h^–1. For the ion pair with But₄N⁺, the detection limit is 0.52×10^–6molL^–1 (29µgL^–1), with a relative standard deviation of 1.6% and a linear application range between 0.73 and 54.0×10^–6molL^–1. Under the proposed working conditions, only Pd(IV), Cu(II) and Bi(III) interfere. With the application of the merging zones technique, considerable amounts of organic reagent can be saved. The TBA method was applied to the analysis of iron(III) in tap and industrial waste waters.     

High-Throughput Screening of Drugs of Abuse in Urine by Supported Liquid–Liquid Extraction and UHPLC Coupled to Tandem MS

A qualitative method, involving supported liquid–liquid extraction (SLE) and ultra high pressure liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS–MS), was developed for the rapid tentative identification of various drugs of abuse in urine. In this study, 28 drugs and metabolites were covered by the screening procedure. Before analysis, urine samples were extracted by SLE and good extraction recoveries were obtained for most investigated compounds. The UHPLC strategy was then selected for the rapid separation of amphetamines, cocaine, opiates and related compounds in urine. Using columns packed with sub-2 µm particles, analysis time was reduced down to 2 min, while maintaining acceptable performance. Finally, the detection was by tandem MS operating in the single reaction monitoring (SRM) mode. The most intense transition was selected for the different drugs and SRM dwell times set at 5 ms, to maintain sufficient data points across the narrow UHPLC peaks. The tentative identification of the drugs of interest, including amphetamines, opiates and cocaine, was based on both, retention times and mass spectrometry information. With the proposed method, limits of detection were estimated at about 1 ng mL^?1 and the applicability was assessed by successfully analyzing several samples of drug abusers. Finally, this study demonstrates the potential of UHPLC coupled to tandem MS for the rapid screening of drugs of abuse in urine.     

Application of Solid-Phase Extraction Coupled with Dispersive Liquid–Liquid Microextraction for the Determination of Benzaldehyde in Injectable Formulation Solutions

Solid-phase extraction followed by dispersive liquid–liquid microextraction (SPE-DLLME) technique has been developed as a new analytical approach for extracting, cleaning up and preconcentrating benzaldehyde, a toxic oxidation product of the widely used preservative and co-solvent benzyl alcohol, in injectable formulation solutions. SPE of benzaldehyde from samples was carried out using C₁₈ sorbent. After the elution of benzaldehyde from the sorbent by using acetonitrile, DLLME technique was performed on the obtained solution. Benzaldehyde was preconcentrated by using DLLME technique. Thus, 1.5 mL acetonitrile extract (disperser solvent) and 55.0 µL 1,2-dichloroethane (extraction solvent) were added to 5 mL ultra pure water and a DLLME technique was applied. Several variables that govern the proposed technique were studied and optimized. Under optimum conditions, the method detection limit (LOD) of benzaldehyde calculated as three times the signal-to-noise ratio (S/N) was 0.08 µg L^?1. The relative standard deviation (RSD) for four replicates was 5.8 %. The calibration graph was linear within the concentration range of 0.5–500 µg L^?1 for benzaldehyde. The proposed method has been successfully applied to the analysis of the benzaldehyde in injectable formulation solutions (diclofenac, vitamin B-complex and voltaren) and the relative recoveries were between 88 and 92 % and show that matrix has a negligible effect on the performance of the proposed method.     

LC–UV Methodology for Simultaneous Determination of Lamivudine and Zidovudine in Plasma by Liquid–Liquid Extraction

This study describes an accurate, sensitive, and specific chromatographic method for the simultaneous quantitative determination of lamivudine and zidovudine in human blood plasma, using stavudine as an internal standard. The chromatographic separation was performed using a C8 column (150 × 4.6 mm, 5 μm), and ultraviolet absorbency detection at 270 nm with gradient elution. Two mobile phases were used. Phase A contained 10 mM potassium phosphate and 3% acetonitrile, whereas Phase B contained methanol. A linear gradient was used with a variability of A-B phase proportion from 98–2% to 72–28%, respectively. The drug extraction was performed with two 4 mL aliquots of ethyl acetate.     

Extraction and Determination of Two Antidepressant Drugs in Human Plasma by Dispersive Liquid–Liquid Microextraction‒HPLC

In this study, an effective method of ultrasound-assisted ionic liquid based dispersive liquid–liquid microextraction (UA?IL?DLLME) coupled with HPLC was applied for extraction and determination of two antidepressant drugs: venlafaxine hydrochloride and amitriptyline hydrochloride from human plasma samples. Three ionic liquids were studied: 1-butyl-3-methyl imidazolium hexafluorophosphate, 1-hexyl-3- methyl imidazolium hexa-fluoro-phosphate, and 1-octyl-3-methyl imidazolium hexafluorophosphate [C8MIM][PF6]. Various factors affect the stages and efficiency of extraction, some of which are pH of sample solution, type and volume of ionic liquid, the time of ultrasonication, centrifuging time and rate, and the ionic strength of solution. In this research, optimum conditions were obtained as 55 μL of [C8MIM][PF6] selected as ionic liquid, pH 11, 2% NaCl, 4 min ultrasonication and 5 min centrifuging at 3500 rpm. Under the optimized conditions, the linearity was obtained in the range of 0.2 to 250 μg/L. The limits of detection were 0.5 μg/L for venlafaxine and 0.8 μg/L for amitriptyline. Pre-concentration factors were 1.3 × 10³ for venlafaxine and 1.2 × 10³ for amitriptyline. The UA?IL?DLLME method coupled with HPLC was successfully used for the determination of venlafaxine and amitriptyline spiked into the real samples of human plasma.     

Improved Homogeneous Liquid–Liquid Extraction Combined with GC–ECD for the Determination of Organochlorinated Pesticides in Water

In this study, improved homogeneous liquid–liquid extraction (HLLE), equipped with GC–ECD has been developed for the extraction and determination of organochlorinated pesticides (OCPs) in water. The phase separation phenomenon occurred by temperature in a ternary solvent (water/methanol/chloroform) system. Several factors influencing the extraction efficiency were investigated and optimized with orthogonal array design. Furthermore, in this study, for the first time, before immiscible organic phase formation, different volumes of deionized water were subjected to homogeneous solution to investigate the effect of this factor on the extraction performance of HLLE. Optimal results were as follows: volume of the extracting solvent (chloroform), 50?μL; volume of the consolute solvent (methanol), 1.2?mL; volume of the sample, 2.5?mL; volume of the deionized water, 0.5?mL; time of centrifuge, 7?min. Under the optimum conditions, repeatability was obtained by spiking OCPs at concentration level of 20?μg?L^?1, the RSDs varied between 4.8 and 10.7% (n?=?4). The limits of detection of 0.02–0.12?μg?L^?1 were obtained for the OCPs. Enrichment factors and the extraction percent of the studied compounds were in the range of 240–300 and 69.2–84.0%, respectively. Finally, the results of the proposed HLLE method were compared with the same HLLE method without addition of deionized water. The results indicated that the proposed method has higher enrichment factors and lower detection limits.