过渡金属对燃烧法制MgO负载 Cu2O催化剂的改性研究

本文以柠檬酸燃烧法制备MgO(B)载体,采用浸渍还原法以水合肼为还原剂制备Cu2O/MgO(B)催化剂,以环己醇脱氢制环己酮为探针反应,考察了过渡金属Fe、Co、Ni、Mo、Mn的添加对Cu2O/MgO(B)催化性能的影响;采用X射线衍射(XRD)、程序升温还原(TPR)、二氧化碳程序升温脱附(CO2-TPD)以及环己醇、环己酮程序升温脱附(环己醇/环己酮-TPD) 等手段对催化剂进行了表征.研究结果表明,Mn-Cu2O/MgO(B) 、 Ni-Cu2O/MgO(B)的催化性能优于Cu2O/MgO(B).其原因主要是Mn、Ni的添加使Cu2O的抗还原能力增强,Cu2O更稳定;同时,Mn和Ni的添加使Cu2O/MgO(B)催化剂对反应物和产物的吸附强度减弱;这些都有利于脱氢反应的进行.所有催化剂都呈碱性,是其具有高环己酮选择性的原因之一.     

溶胶凝胶法制备的Cu/SiO2催化剂及其催化草酸二甲酯加氢反应

采用溶胶凝胶法制备了用于草酸二甲酯加氢合成乙二醇的Cu/SiO2催化剂,在优化的反应条件下,当催化剂中Cu含量为15%～25%时,草酸二甲酯转化率和乙二醇选择性分别达到99.9%和95.0%.通过N2吸附-脱附、透射电镜、X射线衍射、氢气程序升温还原、N2O滴定法和X射线光电子能谱等手段对各Cu/SiO2催化剂进行了表...     

CeO2助Ni/MgO催化剂用于化学气相沉积法制备多壁碳纳米管

以柠檬酸燃烧法制备的Ni/MgO,Ni/CeO2-MgO和Ni/CeO2为催化剂,CH4为碳源,采用化学气相沉积法制备多壁碳纳米管(MWCNTs),通过N2吸附、X射线衍射、H2程序升温还原和X射线光电子能谱对催化剂进行表征,并运用热重和透射电镜表征了碳纳米管的质量和形貌.结果表明,CeO2的加入可有效地降低还原温度和...     

载体焙烧温度对Ru/MgAl2O4催化剂液相苯部分加氢性能的影响

采用水热合成法制备了镁铝尖晶石(MgAl2O4)材料,制备了其负载的Ru催化剂,研究了MgAl2O4焙烧温度对Ru/MgAl2O4催化剂上液相苯部分加氢催化性能的影响.采用X射线粉末衍射、27A1固体核磁共振、傅里叶变换红外光谱、H2-程序升温还原、H2-程序升温脱附、N2物理吸附、透射电子显微镜和X射线光电子能谱等手...     

MgO海/泡石复合载体负载Cu催化剂催化环己醇脱氢

采用浸渍沉淀法制备了不同比例的MgO/海泡石(Sep)复合载体负载Cu催化剂,并考察了其对环己醇脱氢反应的催化性能。采用N2气物理吸附、X射线衍射(XRD)、红外光谱(IR)、氨气程序升温脱附(NH3-TPD)、程序升温还原(TPR)等测试技术对催化剂进行了表征。结果表明,海泡石的引入有助于催化剂比表面积的增加,但当载体中海泡石的比例太高时,会导致催化剂酸性以及活性组分Cu状态的变化,从而降低催化剂的活性和选择性。当复合载体中海泡石质量分数为40%时,催化剂的活性最高,选择性也较好。     

不同MgO担体对Ba-Ru/MgO氨合成催化剂物化性质和反应性能的影响

采用不同沉淀剂制备了MgO材料,以其为载体制备了Ba-Ru/MgO氨合成催化剂,考察了沉淀剂种类和BaO助剂对其氨合成性能的影响.通过X射线衍射(XRD)、N2物理吸附、X射线荧光光谱(XRF)、透射电镜(TEM)、H2程序升温还原(H2-TPR)、CO2程序升温脱附(CO2-TPD)、H2程序升温脱附(H2-TPD)和N2程序升温脱附(N2-TPD)表征手段,对不同沉淀剂影响Ba-Ru/MgO催化剂氨合成性能的原因进行了探索.结果表明:采用(NH4)2CO3作沉淀剂制备的Ba-Ru/MgO催化剂表面Ru物种易于在低温下还原,催化剂表面在低温区具有较多数量的弱碱性吸附位,在450℃、5.0 MPa和5 000 h-1条件下,由(NH4)2CO3做沉淀剂制备的Ba-Ru/MgO催化剂活性最高,出口氨浓度为3.74%.BaO助剂的加入大大减少了Ba-Ru/MgO催化剂表面吸附氢的数量,增大表面脱附氮的数量,从而易于N2解离吸附,提高氨合成反应速率.     

草酸钠改性共沉淀制备高效Cu/ZrO2催化剂及其 在甲醇部分氧化制氢反应中的应用

采用四种不同沉淀剂并流共沉淀制备系列Cu/ZrO2催化剂, 结果表明经过Na2C2O4和NaOH改性沉淀的催化剂在甲醇部分氧化制氢反应中表现出比NaOH, Na2CO3和Na2C2O4-Na2CO3沉淀的催化剂更优越的催化性能, 在533 K可获得92%的氢气产率而CO含量低于1.5%, 并且在110 h寿命测试中保持良好的稳定性. 采用X射线粉末衍射, N2低温吸附, H2-TPR, N2O滴定和X射线光电子能谱对其进行系统表征, 阐述了该改性共沉淀法所得催化剂高性能的本质原因.     

以类水滑石为前驱体的含Cu催化剂催化糠醛加氢反应

 采用共沉淀法制备了不同 Cu 含量的铜镁铝类水滑石 (Cux-MgAl), 再在 500 oC 焙烧制得 Cux-MgAlOy 催化剂. 分别考察了在 220 和 300 oC 还原时, Cu 含量对 Cux-MgAlOy 催化糠醛加氢反应性能的影响. 用 X 射线衍射、H2 程序升温还原、紫外-可见漫反射光谱和 X 射线光电子能谱等技术对催化剂进行了表征. 结果表明, 当 Cu 含量为 11.2% 时, Cu-MgAlOy 催化剂活性和稳定性较高, 糠醛加氢生成糠醇及糠醇进一步加氢脱水的催化活性中心主要是 Cu0, 而催化剂中的 CuO, MgO 和 MgAl2O4 金属氧化物具有催化糠醛与溶剂乙醇反应生成 2-二乙氧甲基呋喃的作用.     

固相球磨法制备丙烷氧化脱氢V2O5/NiO催化剂

以不同温度焙烧制备的NiO和V2O5为前驱物,采用固相球磨法制备了V2O5/NiO催化剂,考察了前驱物的焙烧温度对该催化剂丙烷氧化脱氢制丙烯反应性能的影响,并采用x射线衍射、N2物理吸附、电感耦合等离子体原子发射光谱、透射电子显微镜、H2程序升温还原和x射线光电子能谱等对催化剂进行了表征.结果表明,固相球磨法制备的V2O5/NiO催化剂表现出较好的丙烷氧化脱氢制丙烯催化性能,当以400℃焙烧的氧化物为前驱体时,V2O5/NiO催化剂表面含有较多的未完全还原氧物种Oδ-,因而表现出了较高的丙烯选择性.在475℃反应时,丙烷转化率可达20.1%,丙烯选择性达到71.2%.     

制备方法对CuO/CeO_2-MnO_x催化剂富氢条件下催化氧化CO性能的影响

分别以一次沉淀法、沉积沉淀浸渍法及直接混合焙烧法制备了Cu O/Ce O2-Mn Ox催化剂,并运用XRD(X射线衍射)、N2吸附脱附、XPS(X射线光电子能谱)、H2-TPR(程序升温还原)等手段对催化剂进行了表征,讨论了Cu O/Ce O2-Mn Ox催化剂的制备方法对富氢条件下CO催化氧化性能的影响。分析结果表明:沉积沉淀浸渍法制备的Cu O/Ce O2-Mn Ox催化剂并不具有最大的比表面积及最小的晶粒尺寸,但表现出最优的催化活性;沉积沉淀浸渍法使Cu O/Ce O2-Mn Ox催化剂表面分布较多的活性铜物种及丰富的Mn Ox,使得催化剂表面晶格氧含量增多,同时表面羟基、碳酸盐等易导致催化剂失活的物种减少,这些是其具有高催化活性的关键因素。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.