石墨烯修饰的三唑磷分子印迹电化学传感器的制备

采用石墨烯作为电极增敏材料,制备三唑磷(TAP)分子印迹电化学传感器。采用自由基聚合法,在石墨烯修饰电极(GR/GCE)上合成分子印迹聚合物膜(MIP)。利用微分脉冲伏安法、电化学阻抗谱对不同修饰电极进行电化学表征,利用微分脉冲伏安法考察了MIP和非分子印迹聚合物膜(NIP)传感器的电化学性能。在最优实验条件下,TAP浓度在1.0×10~(-7)～2.0×10~(-5)mol·L~(-1)内和MIP膜传感器峰电流呈线性关系,检出限为4.3×10~(-8)mol·L~(-1)(S/N=3)。建立MIP膜传感器的动力学吸附模型,测得结合速率常数k为9.0580 s。     

基于石墨烯掺杂金纳米粒子的速灭威分子印迹电化学传感器

以速灭威(MTMC)为模板分子,甲基丙烯酸(MAA)为功能单体,马来松香丙烯酸乙二醇酯(EGMRA)为交联剂,在石墨烯掺杂金纳米粒子修饰玻碳电极表面合成分子印迹膜,研制了测定MTMC的分子印迹电化学传感器。采用扫描电镜(SEM)对传感膜的形貌进行了表征,通过循环伏安法(CV)、电化学阻抗谱法(EIS)和差示脉冲伏安法(DPV)对传感器的性能进行了研究。DPV测试表明,MTMC的浓度在1.0×10-7~1.0×10-4mol/L范围内呈现良好的线性关系(线性相关系数为R=0.9936),检出限2.9×10-8mol/L(S/N=3)。传感器应用于蔬菜样品的加标回收检测,回收率在93.4%~106.4%之间。     

碳纳米管修饰电极分子印迹传感器的制备及其对氧乐果的测定

以氧乐果为模板分子,邻苯二胺为功能单体,在碳纳米管修饰的玻碳电极表面通过电聚合方法制成氧乐果分子印迹聚合物膜,用无水乙醇洗脱后制备出对氧乐果有特异响应的电化学传感器。通过循环伏安法和电化学阻抗法对分子印迹传感器的电化学性能进行表征。以K_3Fe(CN)_6为探针,采用差分脉冲伏安法研究了该分子印迹传感器的分析性能,建立了氧乐果的间接测定方法。结果表明,K_3Fe(CN)_6的相对峰电流与氧乐果浓度在1.0×10~(-7)~2.0×10~(-6)mol/L范围内呈良好的线性关系,检出限为3.6×10~(-8)mol/L。     

纳米氧化铜掺杂的苯巴比妥分子印迹电化学传感器的制备及其识别性能研究

为了提高苯巴比妥分子印迹传感器的灵敏度,以甲基丙烯酸为功能单体,马来松香丙烯酸乙二醇酯为交联剂,热聚合了一种纳米氧化铜掺杂的苯巴比妥分子印迹传感器。分别采用循环伏安法( CV)、电化学交流阻抗法(EIS)、差分脉冲伏安法(DPV)、计时电流法(CA)对这种印迹传感器的电化学性能进行了研究。分别采用红外光谱、扫描电镜对此印迹传感器的结构及形貌进行了表征。结果表明,以铁氰化钾为分子探针的间接检测中,铁氰化钾的峰电流值与苯巴比妥的浓度在1.2×10-7~1.5×10-4 mol/L范围内呈现良好的线性关系(线性相关系数R=0.9984),检出限(S/N=3)为8.2×10-9 mol/L。将此印迹传感器用于实际应用,回收率在96.5%~103.0%之间。     

Au-Pd合金纳米管修饰的尼古丁分子印迹膜传感器的研究

基于Au-Pd合金修饰的玻碳电极为工作电极,采用循环伏安法将邻氨基酚与尼古丁电沉积在工作电极上,制备了尼古丁分子印迹膜传感器。采用差分脉冲伏安法研究尼古丁在尼古丁分子印迹膜传感器上的电化学行为,考察了模板溶解时间、富集时间和溶液pH值对尼古丁测定的影响。在优化实验条件下,尼古丁分子印迹膜传感器的线性范围为1.2×10~(-7)~2.5×10~(-3) mol/L,检出限为4.6×10~(-8) mol/L。用该传感器对吸烟者血液中尼古丁的含量进行检测,结果表明,该传感器具有灵敏度高、线性范围宽、重现性及稳定性好等优点。     

柚皮苷分子印迹传感器的制备与应用

以邻氨基酚为单体,无电化学活性的柚皮苷为模板分子,采用循环伏安法(扫速为100mV/s)在碳电极上往复扫描30次,电聚合出具有识别柚皮苷分子功能的敏感膜。以扫描电子显微镜(SEM)、X射线全反射(XRR)及电化学方法对该印迹传感器进行表征。结果表明,印迹传感器敏感膜与非印迹膜在形貌结构和电化学特性方面有明显的不同。此传感器对柚皮苷有较好的选择性,响应快(30s),在6.0×10-5～1.4×10-4mol/L范围内呈线性关系,且重现性好(RSD=1.8%,n=5);传感器对柚皮苷的检出限为1.6×10-5mol/L。     

利巴韦林原位聚合分子印迹电化学传感器的研制

利用原位聚合分子印迹技术,以3-氨基苯硼酸(3-ABBA)为功能单体,利巴韦林(RIB)为目标分子,以硼酸和顺式二醇在不同酸碱度条件下可逆形成环内酯键为原理,在玻碳电极表面原位聚合形成利巴韦林分子印迹膜,研制了测定利巴韦林的分子印迹电化学传感器。采用循环伏安法(CV)和差分脉冲法(DPV)对印迹膜性能进行研究。DPV测试表明:在最优实验条件下,利巴韦林的浓度在5.0×10~(-8)~1.0×10~(-5)mol/L范围内与峰电流呈良好的线性关系,相关系数(r~2)为0.995 3,检出限(S/N=3)为1.5×10~(-8)mol/L。特异性实验表明制备的传感器对利巴韦林的选择性良好。该分子印迹电化学传感器可用于食品中利巴韦林的检测。     

尼泊金乙酯分子印迹膜电化学传感器的制备

以邻苯二胺为功能单体,尼泊金乙酯为模板分子,通过电化学聚合在玻碳电极表面制备了尼泊金乙酯分子印迹膜,采用循环伏安法及方波伏安法,以K3[Fe(CN)6]为电活性探针,建立了间接测定尼泊金乙酯的分析方法。实验结果表明,制备的分子印迹膜电化学传感器对尼泊金乙酯具有较高的选择性和灵敏度,测定尼泊金乙脂的线性范围为2.5×10-6~1.0×10-5 mol/L,检出限为8.61×10-8 mol/L。     

基于石墨烯-纳米金修饰分子印迹传感器测定黑茶中芦丁

在金电极表面滴涂石墨烯(GR),通过电沉积技术沉积纳米金(Au)构成石墨烯-纳米金修饰电极(Au-GR/GE)。以芦丁为模板分子,邻氨基酚为功能单体,通过电聚合反应在Au-GR/GE表面合成一种对芦丁具有特异性识别能力的分子印迹传感器膜(MIP)。采用循环伏安法(CV)、差分脉冲伏安法(DPV)研究了印迹膜的性能、结构和分子印迹效应,并与槲皮素进行了选择性响应的比较,发现此传感器对芦丁具有良好的选择性。在最佳实验条件下,其对芦丁浓度的定量测定线性范围为6.30×10-7~1.70×10-4mol/L,线性方程为I(μA)=3.8136-8.6247 lg c(mol/L),R=0.9961,检出限为2.10×10-7mol/L。     

基于石墨烯分子印迹电化学传感器测定芦丁

将石墨烯(GR)滴涂至裸Au电极表面,并以邻氨基酚为功能单体,芦丁为模板分子,制备了芦丁分子印迹膜电化学传感器,利用循环伏安法(CV)和差分脉冲伏安法(DPV)对制得的传感器进行了电化学性能研究,并且对制备条件和测定条件进行了优化。结果表明,与裸Au电极相比,该GR修饰的Au电极在[Fe(CN)_6]~(3-/4-)溶液中峰电流明显增大,显著提高了芦丁分子印迹传感器的灵敏度。在最优实验条件下,基于GR分子印迹电化学传感器在4.40×10~(-6)~2.80×10~(-4) mol/L范围内呈良好的线性关系,检测限为1.46×10~(-6) mol/L。用该传感器测定了黑茶中芦丁的含量,获得较好结果。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.